Not able to do goods receipt

Hi Experts,
I have one issue that ,PO (Intra-company stock transfer Scenario) is OLD PO raised in 2007 .For this PO Outbound delivery & GI happened.Along with this shipment document created & payment also done .The material is in Transit and now we want to either receive the material or want to cancel the goods issue.
Please guide me on ,what should be done.
AMIT

Hi,
If physically that material is not tracable remember that after GR stock of receiving plant will increase and after deleivery cancellation stock of your issuing plant will increase.
Decide accoring to that and then carry out physical inventory in both plant to regularise stock
Regs,
Appie

Similar Messages

  • User not able to create goods receipt

    hi experts,
    workflow is completed and purchase order also released
    but user doesn't able to create goods receipt
    i have checked in return parameters in container there is no error
    how to check the workflow and why user getting problem??
    could you please send your advises ,

    Hi,
    What Error you are getting ?
    Regards,
    Manish Jain

  • Not able to do goods receipt in MIGO

    Hi,
    While doing goods receipt for process order through MIGO, system gives me an error "The document xxxxxxxxxxx does not contain any selectable item".Suppose if it is MB31 we can solve the problem by tick the "suggest zero lines"but for MIGO what we should do to solve this problem.

    Hi,
    check in the routing whether the control key entered is having Automatic GR check box ticked, if it is there then thorough confirmation u can do the GR not manually, other the wise change the contorl key for operation which is not having the tick the do it thorough MB31.
    regards
    ramakant

  • Not able to post goods receipt trcode MB1c

    hi problem in posting the gr (mb1c)
    when i am trying to post goods receipt i am getting the message
    ctr1000/testcc is not assigned to a business area.
    but when i am trying to assign a business area to cost centre testcc
    it is giving the message that transaction data already exists.
    please note 1000 is my co code
    1000 is my controlling area
    test cc is my cost centre.

    Hi,
    Good afternoon and greetings,
    I presume there should be a transaction already existing for that particular cost centre and that is the reason it is not allowing you to do the change...go to the cost centre reporting and reverse the old transaction and then make the changes and post the new transaction using MB1C.
    Please reward points if found useful.
    Thanking you,
    With kindest regards
    Ramesh Padmanabhan

  • Able to do Goods Receipt without Goods Issue in Intercompany STO process

    Hi,
    We are in ECC 6.0 and noticed that we are able to post Goods Receipt in receiving plant (Intecompany) without even goods issues in supplying plant.
    How to restrict proceeding Goods receipt in case no GI at supplying plant?
    Please advice.
    Regards,
    Ram

    SAP explains in OSS Note 25220 - No stock in transit with cross-company purchase orders:
    This procedure was chosen because usually the issuing and receiving companies have to be managed on different computers.  In addition, goods receipt in the receiving plant can be posted before goods issue in the issuing plant with this kind of stock transfer, i.e., the corresponding stock in transit would temporarily be negative.
    If you want restrict this situation, then you have to do some coding in  userexi: EXIT_SAPMM07M_001

  • User is not able to find the receipt to correct it from Iprocurement.

    User is not able to find the receipt for PO to correct it. User logged into iProcurement and queried for this PO but system says no data exists.
    I checked there is a receipt for this PO and the same can be queried in Correction window through core APPS.
    Could you please help why its not available in iProcurement for correction.
    Thanks in Advance,
    AVN

    Are you logging into right organization (OU) to check the receipts?
    Check your ship to location in PO and then based on that change your organization (through responsibility or change organization) then query yur receits, it should come.
    BTW for receipts to be seen, the PO lines should not be in "CLOSED" status!
    Jithendra

  • Packaging material is not appearing in the Goods receipt of STPO

    Dear All,
    We are currently dealing one Roll-Out project for one multinational company. In that from sales side, one of the main processes defined is u201CStock Transport Purchase Order processu201D. As a regular process, outbound delivery document also created with ref to STPO.
    As per the client requirement the u201CPackaging materialu201D needs to be added as additional line item in the delivery to calculate the packaging cost. This packaging material is a "Stockable and Valuated" material. So while performing the PGI the stock will get reduced from SD side.
    The problem is, using this same STPO delivery document the Goods receipt is planned to do in the another side of company code. while doing the Goods receipt system is displaying only the "Finished Product" only. The packaging material is not displaying while doing the goods receipt in the another company code.
    due to this we are not able to complete our test cycle.
    so we need the expert opinion to solve this issue.
    if the packaging material is added as additional line item while doing Goods receipt then, the problem is solved.
    Kindly suggest us...
    Regards,
    MANI
    frWe have customized that also and now u201CPackaging materialu201D is adding as a new line item in the delivery document as a non valuated material.
    But the issue is, the Billing type u201CZICu201D is not getting determined while creation of billing if u201CPackaging materialu201D is added as a new line item. If u201CPackaging materialu201D is not added as a line item then, billing type is getting determined automatically without any issue.
    We have checked in LIKP table, its containing the billing type as u201CZICu2019. But if packaging material is added then, the billing type determination is not happening.
    We are assuming that some customizing needs to be done from MM/SD point of view. I am seeking the experts help regarding this issue to solve the problem.
    Regards,
    MANI

    Dear Friends,
              Thanks for the Feedback.
    Even though it is a associated company, in one company code the packaging material stock was reduced and packed for the STPO shipment.
    After receiving the consignment, in the receiving company code they will perform the goods receipt with ref to "Outbound Delivery" document.
    Since in the outbound delivery document "Packaging material" also available. So as a business strategy we are expecting the same "packaging material" also should available for goods receipt.
    I hope i have explained with max of my knowledge to clear your doubt.

  • Stock does not exist when posting goods receipt ?

    Hi,
    I've created a purchase order ( OK ) And then use MIFO for posting goods receipt to warehouse 001, the posting is OK , But then I check the Stock for this material , There is nothing found . Could you please help me ?
    2. In Invoice verification MIRO , I use to verify invoice from PO , but it require Tax code ( I've entered all available tax code but it require jurisdiction code ) . Here could you please help how to config tax code for Invoice verification ( Not jurisdiction code ).
    Thanks in advance

    I've found that these codes was inserted automatically into  FM
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
    CALL FUNCTION 'TRANSACTION_END'
         EXPORTING
              transaction_id = transaction_id
         EXCEPTIONS
              OTHERS         = 1.
    FUNCTION bapi_po_create.                                    "#EC ENHOK

  • Non Stock Items not posting in AP Goods Receipt

    Is it possible for SAP to post transactions for Non Stock Items in AP Goods Receipt?
    I was hoping that it would perform the following, as it does for Stock Items:
    Dr Expense                        xxx
    Cr Allocation Account                  xxx
    Then when the AP Invoice is raised
    Dr Allocation Account          xxx
    Cr Creditos Account                    xxx

    I am currently using 2007A Sp 39

  • I ordered a new iphone under my email address, not signed in.  I'm not able to view my receipt

    Hi
    I ordered a new iphone under my email address but as a guest,
    I can see tracking of my order, but when I choose to get a receipt, I need to sign in and there's no information about my order / receipt. what to do???

    I have had the problem now for 3months I thought it might be my old iPhone 5 so I upgraded to a iphone6.I took it to a Verizon store and waited for about 1 hour and they could not fix it I know my settings a spot on but every time to try and reset it the same old username or passord is incorrect message pops up so I thought I would try and get in by the back door I tried the yahoo E mail app but I still only receive about 2 or three E mails When I go on my laptop and check there was 120 unread.Also every time I go to a Verizon site I can't get in to my E mail account for all the commercial pages diverting me elsewhere Does anyone in Verizon have an answer? I really don't want to try and fix it by going to a Verizon page that is only going to try and sell me something or how much my bill is.Verizon if you read this we need help! Not commercials.

  • User is not able to find the receipt for a PO in the receit find form

    Hi All,
    There is a receipt created for a PO. But when i try to search in the Receipt search window, its says 'No Data Found. Can anybody tell me why will this happen and what can be the fix.
    Thanks in Advance.
    Thanks

    Hi,
    Thanks Stick and Sandeep for the response.
    Yes, both are in the same ORG.
    I queried the PO and select View Receipt (here i can view the receipt details) and then Transactions, but i do not see any error message there.
    Thanks
    Edited by: Skumar on Jun 27, 2011 2:37 PM

  • Not able to post goods issue in case of delivery against a repair order

    A faulty part was received from customer and repaired and further it has to be sent to customer. Then delivery has been created. Also handling unit has been assigned. Now at the time of post goods issue, following error is appeared.
    "Deficit of sales order stock".
    When I checked with transaction MMBE, I don't find any stock assigned to this order.

    Hi Atul
    Please ensure that the settings is as per the followign link
    http://help.sap.com/saphelp_47x200/helpdata/en/00/044f350bea3278e10000009b38f839/frameset.htm
    Thanks
    G. Lakshmipathi

  • Goods receipt during reversal of production order

    Hello ALL,
    I use production orders confirmation with Aut.goods receipt.
    Example is the following:
    I confirm 3psc of production order for semi-finished product, so system posts 3pcs with 101 movement type.
    Production order status is DLV
    Then 1 pc is consumed for the next production step, it means the physical stock is now 2 pcs.
    In the next step I want to reverse the confirmation of  production order with movement type 102 ( I use CO13 )
    I get message in COGI - Deficit of  unrestricted-use - 1pc and I am not able to reverse goods receipt at all. Production order status is still DLV. Reversal of material document is impossible.
    I know it is reasonable but my question is: is it possible to reverse goods receipt only partially during CO13 - for 2 pcs and get production status PDLV ???
    I know the sulution is to return missing 1 pc, but I would like to avoid this
    thanks for help
    KS

    dear KS,
    as far as i know...
    ...every confirmation entered in the system can be canceled : if you entered three confirmations (just an example) for an operation, you can also cancel three confirmations and all confirmations automatically created by them
    1. you can change confirmations or partially cancel them;
    2. if you also activate user statuses when confirming an operation, these statuses are not automatically canceled when you cancel the confirmation;
    3.if you cancel a confirmation, the functions that were triggered by a trigger point are not revoked (for example, creating a rework operation).
    good luck!

  • Goods receipt PP

    Dear All,
    I have batch management process....maintained the material type as HALB.....and kept back flushing in one operation of routing.....
    But while creating the production order in goods receipt tab...non valuated goods is ticked and goods receipt is not ticked....because of which I am not able to do goods receipt....
    Please suggest what all things to maintain....
    Thanks and regards,
    Pawan Shetty

    Hi Pawan,
    GR non vaulated indicator automatically gets checked for a meterial in production order if below condition is met.
    This indicator is only relevant to production orders, projects and and configurable materials with account assignment to a sales order.
    check in assignment tab if sales order or wbs element is visible.
    Kindly check and revert.
    If you  do not want to have sales order specific stock,  maintain individual/collective requirment indicator in MRP4 view of material master as 2 collective only.
    Regards,
    Santosh Sarda

  • Goods Receipt not Increasing the Inventory and creating a variance instead

    Hi Experts,
    We have this situation in some of the goods receipts and not all of the goods receipts. In some Goods receipts, what is happening is:
    1 - When we copy the goods receipts from the PO and add the goods receipts, the G/L account for Inventory Variance is Debiting instead of Debiting the the Inventory in that particular warehouse. I want to change the G/L from Inventory Variance Account to Inventory Account. I have checked all the settings but I am not able to understand why this is happening. I did the same Goods in the test server, everything was perfect. Like this we have couple of Goods Receipts that hit the wrong G/L. We use SAP Business One 2007A PL:08.
    Any Idea why this is happening only to some goods receipts? Would greatly appreciate your earliest response.
    Please let me know the checkpoints as well if possible. May be I am missing something here.
    Thanks

    Hi all ,
    You can set other warehouse for that particular Item Or Create Duplicate Item From  item Master and Delete old one and set quantity as per GL Or your requirement.
    Thanking you,
    Ganesh Mahajan

Maybe you are looking for