Not able to see project (slideshow) in Organizer

I got the Blue Screen of Death while working on a slideshow in PSE 7. When I restarted, the project was corrupted and I could not get back into it. Fortunately, I had backed up just a couple days prior using PSE 7. I did a restore, and all my projects show in the Organizer except the one that I was working on.
I can see the .psess file in c:\Program Data\Adobe\Photoshop Elements\Catalogs\My Catalog7\projects. Is there any way to salvage my project? I've put so many hours into it, and thought I was covered by the backup in PSE 7.
If the project can't be salvaged, what are the files that need to be manually backed up for a slideshow... so I can prevent this from happening again in the future?
Thanks

All the rest of the slides were black "empty".
Most likely, this is because the .psess contains references to images that don't exist in the current catalog. A .psess file references images by their internal catalog IDs, not filename. Perhaps the .psess was created or modified after the version of the catalog that you restored from backup, and the IDs of some of the images referenced by the .psess don't exist in the catalog.
If I wanted to backup the slideshow manually, is the .psess file the only one that is needed to re-create the slideshow?
No, you need the .psess file, the catalog folder (which happens to contain the .psess files), and all the actual images referenced by the slide show. In other words, you pretty much need a full catalog backup. It doesn't have to be a backup made by PSE -- it could be a backup made by a general-purpose backup program.

Similar Messages

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

Not able to see General Documentation in Implementation Project

Hi All,
I've created one Template Project and one Implementation Project. Now I've added some documents to Template Project - General Documentation Tab. Ideally this newly added documents should be appeared in Implementation Project - General Tab. But in my case I am not able to see this newly added documents. Is there any reason behind this? What should I do to make them visible in Implementation Proj - General Documentation tab?
Another question is, If a document from Project Documentation tab is deleted by pressing 'Delete Row' button (not actual 'Delete' button), how can I retrieve that document? How can I see the list of all deleted documents?
Thanks in advance!
Shaun
Edited by: shaun99 on Feb 16, 2012 4:28 PM

Hi Shaun,
For the implementation project, please read the session "USING THE TEMPLATES" in the wiki page for template projects, where it explains how to update your project with the changes made in the template project.
-http://wiki.sdn.sap.com/wiki/x/gRkMDg
regarding the download, I'm not aware of any easy way to do mass download of the documents. Maybe in SI80 you could do such thing but I believe you would only be able to filter by the folder where the documents are phisically stored and as you're using a template project, all the documents are stored in the folder SOLAR00, shared along with solutions and etc..
more info about this in the wiki page for documents in solar01 and solar02:
-http://wiki.sdn.sap.com/wiki/x/rBoMDg
Kind regards, Fabricius

Fireworks slideshow: not able to see images thumbnails preview

Dear all,
I have successfully created 3 slides show with caption text and everything, out of the blue the slideshow in fireworks does not work the same way. I create my new album, then select the image and there is no preview on the lower right hand corner, it tells me that the file is not found (please see attached jpg image with a dash circle around it) and I cannot write anything to describe my images because I am not able to see the thumbnail, please help, thanks in advance

I cannot reprodue this problem in CS5.

Order to cash flow(not able to see order number in release sales order)

Working on order to cash flow.Following these steps
Creating a requisition (Purchasing)
Approve
Creating internal orders(Purchasing)
Import Orders(Order Management)
I'm able to see the order number,in order returns,order organizer
Shipping>Release sales order>release sales order
Not able to see the order number here for Pick release

Hello,
Do you have grants and role to your inventory? if not check Re: Org Code grayed out and defaulted in Shipping Trx form
Regards,
Luko

Not able to see the Person who posts reply and asked the question.

Hi,
I am facing issue with Posts in MSDN forum. I am not getting the name of Person who replied and asked the question which earlier used to come below the Post.
Are all facing the same issue? I am using IE 8 and Google Chrome 33.0.1750.117 m.
Can anyone please help.
One good question is equivalent to ten best answers.

I am using Google Chrome Version 33.0.1750.146 m (updated today). I am seeing names fine.
It may be also your connection speed and some extra add-on you have.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles
My Google Chrome is also updated to 33.0.1750.146 m, and I am using high speed internet connection in my organization, but still I am not able to
see poster details. Even there is no data coming below
"Asked by:" section at Top left corner of MSDN Forum.
One good question is equivalent to ten best answers.

I'm not able to see Planning Application in Planning Webclient

Hi,
I have created a Classic Planning Application in WorkSpace successfully and I'm able to see the same application after Refreshing application in EAS Console.
I have done necessary steps registering application with the shared services and I'm able to see that application in shared services project also. But I'm trying to access this application through Planning URL I'm not able to see Planning Application in Drop down list.
Could anyone suggest me what could be the problem for this?
We are using HYperion Planning Fusion Edition 11.1.1.2 Version.
Thanks,
Suresh.

So you have created a planning application and it was succesful, you go directly to planning and don't see it in the dropdown?
If so when you created the application what instance you set it against, if you have more than one instance and you have it against the non active instance you won't see the planning application in the drop down.
Cheers
John
http://john-goodwin.blogspot.com/

Could not able to see POs in URL (SRM-SUS-MM) Scenario

Hi All,
We have created a PO in MM(R/3) and was transferred to SUS through XI.
We could able to see the PO in TCode BBP_PD in SRM-SUS. But for some reason we are not able to see the PO from the URL.
We have Purchaser (SRM_ADMIN) and Vendor (ARAMI-02) assigned the roles SAP_EC_SUS_ADMIN_PURCHASER and SAP_EC_SUS_ORDER_PROCESSOR respectively.
My Org Structure is as follows:
We have an Organization defined as company. Function CCode deifined.
We have an POrg defined as POrg Function POrg Defined.
We have an Pgrp defined as PGrp Function PGrg Defined.
We have defined vendor Org. haven't assigned anything in function tab.
But defined some attributes needed for Vend Org.
The PO is coming into transaction BBP_PD(SRM SUS) through XI from MM R/3 but is not available in URL either for Purchaser or for Vendor.
Please tell me what needs to be done to resolve the above issue.
Thanks in advance...
Regards,
Ravi..

Hi
Yes sure.. Ask BASIS Team to help out and add the required role / profile to the required User, who is unable to see the POs.
Please go through the following SAP OSS Notes as well ->
Note 852516 Buyer administrator is not able to view supplier documents
Note 854910 Buyer administrator is able to change status for invoices
Note 818385 Purchaser Admin has wrong authority to change invoices
Note 1024327 Short dump when trying to open a vendor message
Note 1032800 Error opening a vendor message in SUS
Note 1029356 Error opening a vendor message in EBP&SUS in one client
Note 884905 No SUS alerts displayed in BP SuCo 2.0
Note 743084 Missing status 'rejected' for Order in Menu
Do let me know.
Regards
- Atul

Not able to see 0doc_number object

Hi,
I have created sales organization dimension I want to take 0doc_number ( sales document) using info
object direct input but I am not able to see 0doc_number object
Regards,
Vivek

Hi,
Normaly after IOBJ Installation from BI Content you wil not be able to see that in the modeling.
For this follow the steps
1. Goto RSD3 and enter the IOBJ and click on enter.Then you will be able to know active or not.I hope it will exist.
2. Now u want to mainatain that IOBJ in u r catalog.Open u r catlog and maintain u r object.
Regards
Ram.

Could not able to see Subcontracting PO in ME2O requirement list.

Dear Experts,
I have a subcontracting PO with Account assiged to the Project. I know as we can not use the 541 O Movement type to provide the components to the to the Sub contracting vendor when the PO is account assined to the Project. But my requirement is only to see My subcontracting PO (Account assigned to Project) in ME2O requirement list. Based on the requirement list I will transfer my stock to vendor sloc with 311q Movt type.
I have created the PO but could not able to see in ME2O, is anything I have missed to maintain in config or in some othe rplace.
Regards,
Cherry K

Hi Cherryk,
In case of subcontracting PO with account assignment for Project, components are directly withdrawn from the project stock at the time of the goods receipt. But if you want to withdraw the components from the stock of material provided to vendor then you can set the collective requirement field in Material Master MRP4 view as Collective requirements only (2), then you can use ME2O.
The collective requirement field has to be set for the components to be provided.
Regards
Chandra Shekhar
Edited by: Chandra Shekhar Singh on Jun 2, 2011 10:05 PM

Not able to see Consolidation Administration

Hi All,
I am not able to see the Consolidation Administration from Navigate--> Administer -->Classic Application Administration.
But i am able to see Applications --> Consolidation --> here i am able to see the created applications.
after creating the applications from HFM destop , i am trying to access from workspace i'm getting the error not registed with shared services.
i registered with "HFM Application Registration.exe" still i'm getting the same error.
in shared services also if i select the created application under HFM projects getting error " application is inactive". How to make active an application?
Please let me give the solution if anyone knows
Thanks in advance
Kiran

In this case, I think that there is no real need to change the ports to fix the problem. What you should do is to reconfigure the Web Server from Hyperion Reporting and Analysis configuration. If after this, you still have the same problem, step back and redeploy to Application Server as well. In several occasions in the past I had to step back to the beginning (Shared Services) and reconfigure everything from scratch. Finally it worked though.
As far as we have understood by experiencing the same problem with 9.3.1, we have concluded that when you install the suite on a server that may not be a super hardware, you have to pause and wait between installation and configuration steps, in order for the services previously installed to start running for good. As soon as you start the shared services and the windows services console indicates the service as started, it takes however some time before it's really started. If during that time you go on with installing and configuring next products (hfm, reporting etc), the configuration reports success, but you end up with the problem of opening applications through the workspace.

Not able to see iby_fd_extract_ext_pub custom tags of in XML data

Hi Experts,
I have customized the iby_fd_extract_ext_pub package to add the custom tags in the payment format xml data.Package status is valid but I am not able to see any of the custom element in the XML Data.
Please share your experience if you faced similar issue.
Regards,
Brajesh

1. Do not prefix it just put your code in and compile - unless you want to call XX_IBY_FD_EXTRACT_EXT_PUB from IBY_FD_EXTRACT_EXT_PUB to have minimal impact to IBY_FD_EXTRACT_EXT_PUB.
2. You won't be able to put in an additional parameter, you'll need to derive the Payment Process Profile from SQL by linking from payment document to payment process to payment process profile; or just get the org from, say, the first invoice in the batch - as long as you always group by organization this will be fine.
3. Yes, it is probably that a patch will overwrite your customization - make sure you test it after each IBY patch - use applcust.txt and make sure your DBA's check adpatch logs for the file being overwritten!
Regards,
Gareth
http://garethroberts.blogspot.com
http://www.virtuate.com

Not able to see deployed component while creating iView from "Portel Conten

Hi Guys,
I have import "com.sap.portal.runtime.logon.par"; in NWDS and then give name "Custom Logon" then I have deployed this by "Create/Export PAr File" functionality within NWDS.
Now I logon to the "/irj/portal/....." by using "Administrator" and try to create iView base on deployed "Custom Logon" par file but I could not able to see it to create iView base on "Custom Logon" component.
Can any one tell me what mistake I am making here?
Helpful Answer will be rewarded by Points!!!!!!!!
Thanks.
Ashish.

Hi Srikanth,
I followed all your mentioned step except I changed project name to "CustomLogon"
I copied "com.sap.portal.runtime.logon_api.jar,umelogonbase.jar" file under "PORTAL-INF/lib" directory in NWDS I deployed it through NWDS.
I log in portal by Administrator and try to create iView by selecting create iView base on PAR file but I am not able to see "CustomLogon" portal component.
My question is "Do I have to create Abstract portal Compnent?"
As in "CustomLogon" project which I has imported does not contain any Java Class for Abstract Portal Component........
Pl. explain me where I am making mistake.
I think I have to create "AbstractPortalComponent" Please correct me If I am wrong.
Thanks.
Ashish Patel.

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Not able to see project (slideshow) in Organizer

Similar Messages

Maybe you are looking for