Could not able to see Subcontracting PO in ME2O requirement list.

Dear Experts,
I have a subcontracting PO with Account assiged to the Project. I know as we can not use the 541 O Movement type to provide the components to the to the Sub contracting vendor when the PO is account assined to the Project. But my requirement is only to see My subcontracting PO (Account assigned to Project) in ME2O requirement list. Based on the requirement list I will transfer my stock to vendor sloc with 311q Movt type.
I have created the PO but could not able to see in ME2O, is anything I have missed to maintain in config or in some othe rplace.
Regards,
Cherry K

Hi Cherryk,
In case of subcontracting PO with account assignment for Project, components are directly withdrawn from the project stock at the time of the goods receipt. But if you want to withdraw the components from the stock of material provided to vendor then you can set the collective requirement field in Material Master MRP4 view as Collective requirements only (2), then you can use ME2O.
The collective requirement field has to be set for the components to be provided.
Regards
Chandra Shekhar
Edited by: Chandra Shekhar Singh on Jun 2, 2011 10:05 PM

Similar Messages

  • I could not able to see Imported Business Package

    Hi
    I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
    I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
    I did not deleted the Standard BP from PCD/Migrated Content
    After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
    I could not able to see the Customized BP in PCD….. , Whether that Standard BP should be deleted before Importing
    What is the Default location it stores after importing?
    Plz help me to solve this issue its very urgent.
    Regards

    Hi Michael
    For Example In CRM BP there are set of Roles in that i took only Lead Manager Role and Stored that in my folder xyz as Deltalink and i also copied dependent object pertaining to that Role as Delta link.
    In Transport Package i added all the dependent object and aswell the Role of Lead Management to that Package.
    Before Exporting the Transport Package there is a option called (Include all objects on which the exported objects depend) i checked this option and Id of dependent objects i mensioned as ex: com.xyz
    After doing this i transported my BP

  • Could not able to see my customized BP after Importing

    Hi
    I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
    I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
    I did not deleted the Standard BP from PCD/Migrated Content
    After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
    I could not able to see the Customized BP in PCD….. , Whether that Standard BP should be deleted before Importing
    What is the Default location it stores after importing?
    Plz help me to solve this issue its very urgent.
    Regards

    Hi Sanjay,
    There is no need to delete the Standard BP from PCD/Migrated Content.
    After customizing the business package and storing the content in your own folder, you have to add all objects to new transport package(by right clicking on main folder)then export it and download the epa to your local system.
    After importing the epa in some other portal, BP will sit under same path you have specified while creating business package(PCD).In sense, it will create the same PCD structure when you import epa in some other portal.
    You might have done some mistake while creating transport package and exporting it to your local system. You might not have added all object to new transport package.
    Hope this is of some help. Do write back in case you need further clarification
    Cheers
    Ruchi.

  • Could not able to see POs in URL (SRM-SUS-MM) Scenario

    Hi All,
    We have created a PO in MM(R/3) and was transferred to SUS through XI.
    We could able to see the PO in TCode BBP_PD in SRM-SUS. But for some reason we are not able to see the PO from the URL.
    We have Purchaser (SRM_ADMIN) and Vendor (ARAMI-02) assigned the roles SAP_EC_SUS_ADMIN_PURCHASER and SAP_EC_SUS_ORDER_PROCESSOR respectively.
    My Org Structure is as follows:
    We have an Organization defined as company. Function CCode deifined.
    We have an POrg defined as POrg Function POrg Defined.
    We have an Pgrp defined as PGrp  Function PGrg Defined.
    We have defined vendor Org. haven't assigned anything in function tab.
    But defined some attributes needed for Vend Org.
    The PO is coming into transaction BBP_PD(SRM SUS) through XI from MM R/3 but is not available in URL either for Purchaser or for Vendor.
    Please tell me what needs to be done to resolve the above issue.
    Thanks in advance...
    Regards,
    Ravi..

    Hi
    <b>Yes sure.. Ask BASIS Team to help out and add the required role / profile to the required User, who is unable to see the POs.</b>
    <u>Please go through the following SAP OSS Notes as well -></u>
    <b>Note 852516 Buyer administrator is not able to view supplier documents</b>
    Note 854910 Buyer administrator is able to change status for invoices
    Note 818385 Purchaser Admin has wrong authority to change invoices
    Note 1024327 Short dump when trying to open a vendor message
    Note 1032800 Error opening a vendor message in SUS 
    Note 1029356 Error opening a vendor message in EBP&SUS in one client
    Note 884905 No SUS alerts displayed in BP SuCo 2.0
    Note 743084 Missing status 'rejected' for Order in Menu
    Do let me know.
    Regards
    - Atul

  • I could not able to see bi pulisher reports in dashboar

    hi gurus(bi publisher)
    since one month i have been facing problem with bi publisher reports
    We have created flex chats using bi publisher and we have placed all the chats in dashboard,
    when we were maintaining users and groups in RPD Administrator and all user were able to see the flex chats,
    for that we have created XMLP_ADMIN group in RPD and we assign the uses to that group,Now we are using external tables for user and groups and
    in the table i have created XMLP_ADMIN group in admin and i have assign user to that group
    now the problem is ,administrator is able to see the flex chat reports but all other user r not able to see the bi publisher reprots
    i was getting an error like access is denied please contact to bi publisher Administrator,such error i am getting
    i did all the changes in security configuration ,i set security model as bi_server and i have given everything
    even though users can not able to see the chats
    is there any one using bi-publisher reports in dashboard with external table authentication? please
    help me out form this problem
    Thanks

    Hi
    take a look at the post
    http://bipconsulting.blogspot.com/2010/03/how-to-migrate-bi-publisher-reports-to.html
    Hope this helps
    Regards
    Roy

  • OBIEE 11g  - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.

    OBIEE 11g  - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.
    Appreciated if you could able to help as soon as possible as I don' have back up for these disappeared reports.
    Pleas let me know if any additional information needed.

    Hi
    Thank you for the reply.
    Here one thing I would need to mention that those are created by me on last week, but when I check those today, I could not able to see or even admin also not able to see those. For sure no migration and updations happend over the week end, really not able to debug whats the issue around. Unfortunately I haven't taken back up as well.
    Please could you help and let me know whats the root cause and how I could able to restore.
    Best regards,
    Kumar

  • Service Desk end user not able to see messages

    Hi
    Im configuring service desk.Iam facing following issues.
    1. In solution manager service desk user could not able to see his submitted messages.He could able to submit his message and they are appearing in crm_dno_monitor. Is there any way he can see his submitted messages and message status.
    2. I have assigned following roles to user, but he couldnot able to send message and getting 513 error. If i assign sap_all to him, he is able to submit message. Just i wanted to know how can i avoid sap_all to him.
    ZSAP_SOL_SERVTRANS_CREATE
    ZSAP_SUPPDESK_CREATE
    ZSAP_SV_FDB_NOTIF_BC_CREATE
    Your help is highly appreciated
    Thanks
    Regards
    Mahi

    Hi Mahi,
    Please check about Workcenter:
    1160651:  Work Centers: How to Customize (Solution Manager)
    http://help.sap.com/saphelp_smehp1/helpdata/en/6a/4b4713fc2e45ad921a20b0831d07a5/content.htm
    Make sure the user has the following roles:
    SAP_SUPPDESK_CREATE
    SAP_SUPPCF_CREATE
    SAP_SMWORK_BASIC
    SAP_SMWORK_INCIDENT_MAN
    Message processor:
    SAP_SMWORK_BASIC
    SAP_SUPPDESK_CREATE
    SAP_SUPPDESK_PROCESS
    SAP_SUPPDESK_DISPLAY
      SAP_SMWORK_INCIDENT_MAN
    Concerning this please pay attention of the note:
      834534 - SAP Solution Manager roles in Release 7.0
    Error message 513 is probably caused by incorrect or incomplete
    customizing. Please review attached note 864195 for more details.
    Please also ensure note 1356510 has been applied in your system,
    you may find more explanation in note 1522809.
    Please check the authorizations for your key users. The key user
    shouldn't have the following value on authorization object CRM_TXT_ID:
    TEXTID   SU15
    ACTVT    02
    FM AI_SDK_KEY_USER_CHECK can be used to check a user is a key user or
    not. The key user should have limited authorizations on authorization
    object CRM_TXT_ID.
    Please check security guide for the message processor roles and
    other roles. You can download the security guide from below link which
    will be available to download after half an hour or so or you can also
    find security guide from below link:
    http://service.sap.com/instguides -> SAP Components -> SAP Solution
    Manager
    Thanks
    Regards,
    Vikram Jain

  • I'm not able to see Planning Application in Planning Webclient

    Hi,
    I have created a Classic Planning Application in WorkSpace successfully and I'm able to see the same application after Refreshing application in EAS Console.
    I have done necessary steps registering application with the shared services and I'm able to see that application in shared services project also. But I'm trying to access this application through Planning URL I'm not able to see Planning Application in Drop down list.
    Could anyone suggest me what could be the problem for this?
    We are using HYperion Planning Fusion Edition 11.1.1.2 Version.
    Thanks,
    Suresh.

    So you have created a planning application and it was succesful, you go directly to planning and don't see it in the dropdown?
    If so when you created the application what instance you set it against, if you have more than one instance and you have it against the non active instance you won't see the planning application in the drop down.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Even Administrator could not able to edit the dashboard

    hi all,
    Administrator could not able to see edit dashboard option.... though he is having full control on dashboard....
    What is the problem ....
    did any one change the options.. in instance config file....
    how to make it up
    Thanks

    Hello Pravin,
    I have the complete access, but all of sudden three icons started missing .
    Thanks,
    Srini

  • Not Able to see SAP systems in List of Available SAP Systems for Crystal R

    Hi All,
    We have installed Crystal reports 2008 and SAP integration KIt client software on my machine. I am trying to create Crystal reports based on the BI query and I could see SAP Connections in the 'Create new connections list' but not able to see any SAP systems in the list of 'Available SAP Systems'.
    How to Add SAP systems to this list.
    Thanks,
    Chindam Praveen Kumar.

    1. Define an environment variable (user or system) with the name SAPLOGON_INI_FILE . This variable should contain the path to your saplogon.ini file including the file name eg. if the saplogon.ini resides in the folder c:\windows the variable should contain the following value c:\windows\saplogon.ini
    2. Open your saplogon.ini file using Notepad and go to File->Save as. Choose All Files in the field Save as type and DO NOT change the name of the file. In the field Encoding make sure that UTF-8 is selected.
    ingo

  • Not able to see deployed component while creating iView from "Portel Conten

    Hi Guys,
    I have import "com.sap.portal.runtime.logon.par"; in NWDS and then give name "Custom Logon" then I have deployed this by "Create/Export PAr File" functionality within NWDS.
    Now I logon to the "/irj/portal/....." by using "Administrator" and try to create iView base on deployed "Custom Logon" par file but I could not able to see it to create iView base on "Custom Logon" component.
    Can any one tell me what mistake I am making here?
    Helpful Answer will be rewarded by Points!!!!!!!!
    Thanks.
    Ashish.

    Hi Srikanth,
    I followed all your mentioned step except I changed project name to "CustomLogon"
    I copied "com.sap.portal.runtime.logon_api.jar,umelogonbase.jar" file under "PORTAL-INF/lib" directory in NWDS I deployed it through NWDS.
    I log in portal by Administrator and try to create iView by selecting create iView base on PAR file but I am not able to see "CustomLogon" portal component.
    My question is "Do I have to create Abstract portal Compnent?"
    As in "CustomLogon" project which  I has imported does not contain any Java Class for Abstract Portal Component........
    Pl. explain me where I am making mistake.
    I think I have to create "AbstractPortalComponent" Please correct me If  I am wrong.
    Thanks.
    Ashish Patel.

  • Not able to see any Query Parameters in Siebel Application

    We are unable to see any query parameters once we reach Siebel Application i.e if we access Call Center Application, we do not see any additional data in URL after callcenter_enu/start.swe this happens wven when we add/edit records in Call Center Application.

    Yup, its on. I have tried wifi on n off. Even tried Network reset and restart nothing works. Not able to see any wifi names in the list.

  • Not able to see the data in the report

    Hi All
          In my cube i am having data.But when i am running the report ,i am not able to see the data.
        The error its throwing is -No Applicable data found.
        what could be the problem,please provide me the idea to solve the problem.
    Thanks&regards
    syam prasad dasari

    HI,
    See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
    Thanks

  • Report exection problem for one user - not able to see the data.

    Hello Friends ,
    Need some help . I have got the one ticket from bussniess side about the report execution .
    Unfortunately , I am also not having authorisation of that report due to sensible data.
    Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
    I executed the same report through RSSMQ via his user id , and I got the  below message.
    All value were selected . Hierachy Authorisation cannot be used.
    A displayed hierachy requier a hierachy authorisation .
    But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
    could you please let me know , how can I check more ?
    Regards,

    after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

  • BI Publisher: not able to see the xml data after creating a data model

    I am learning BI publisher and trying to create a report data model
    I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
    I am getting unexpected exception, not able to see the XML view .
    in the server console i got servlet exception, here is one of the line
    com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
    Edited by: joysaha123 on Mar 17, 2010 6:07 PM

    Hi karthik
    Thanks for your response
    Actually iam a beginner in java coding hence struggling to come up with the things
    I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
    actually the same program i wrote in java
    and the same method i was calling from the main
    and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
    and the printing takes place
    but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
    the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
    and this creating problem , had it returned XmlDocument
    i would have printed the elements one one
    but as it is returning deferredimpl
    iam unable to print the elements
    could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
    in servlets but in plain java pogram it is returing XmlDocument
    Thanks
    Bhanu

Maybe you are looking for