Not all storage bins in LX16 transaction Carry Out continous inventory

Hello,
I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
Can somebody help us??
Thanks in advance

hi
LX16 transaction is only for " Continious Physical inventory Counting Only"
LX03 is for bin status Report
Take Continuous Inventory
Purpose
With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
Prerequisites
Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
Process Flow
To run a continuous inventory, you need to complete the following steps in the order displayed:
Plan the inventory by selecting storage bins, for which you want to take inventory.
Create the system inventory record
Activate the system inventory record
Print the warehouse inventory list.
Take physical inventory in the warehouse.
Enter the inventory results
Close the inventory
Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
hope this helps to solve your issue
regards
KKY

Similar Messages

Need a program that will save the capacity settings for all storage bins

Hey all,
I would really apprecaite any help with a program I am trying to come up with.
What I need to do is create a program that:
1. Will save the capacity settings for all storage bins to
a file
2. Then update them all to allow unlimited capacity BUT be able to revert back to the
original that was saved.
Any suggestions about possible existig reports that I may be able to modify to suit my needs, or where to start from if I have to do this from scratch?

I know I'm talking about expensive apps, but having been in prepress for about 30 years now, I really don't look at anything other than Quark XPress or InDesign for page layout apps. Your printing vendor will also be much happier with you when you use these products. Some areas of the U.S. tend to be mostly Quark oriented; others, InDesign. Ask your vendor what they would prefer, and if there are any free or cheap alternative apps they'll accept documents from.
Apple's Pages app (part of iWork) is a decent page layout program, but hasn't been updated in four years. It also doesn't support CMYK. If you place a CMYK image in the app, it will export out an RGB version of it. Not good! You can work with RGB images if you prefer, but your CMYK translations will be left to the skill of the print shop you use to do the conversions.
Don't even think about using Word. It has what it calls a page layout option, and does pretty much work like one, but there's no good way to import it into a real layout app such as InDesign. You end up paying the printer for their time to rebuild your entire project in either XPress or InDesign so they can actually do something with it.

HT5654 Hi my wife has a 2008 iPod Touch which has not been used for at least 5 years. It will not charged and I have tried to carry out a DFU with out any result. Any ideas please?

Hi my wife has a 2008 iPod Touch which she has not used for approximately 5 years. It will not charge and I have tried to carry out a Device Firmware Upgrade to no effect. Can anyone please help?

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

Carrying out physical inventory count for Consignment stock.

Hello,
Can you please tell me what are the steps for carrying out physical inventory count for Consignment stock provided by vendor?
Sincerely,
Ketan

HI
IN MI01,, select the special stock indicater,, then PI will be created for consignment stock also.
regards,
sudhakar

Carrying out Physical inventory Specifying A Class items

Dear Team,
Is there any way to Specify the ABC Classification at the time of carrying out Physical inventory for WM.
Apperciate ur inputs.
Regards
Zulfikar

No there is no such option in SAP.

Carry out continuous inventory LX16 when click Actvitatesystem giving error

Hi,
In transaction LX16 when click Activate system giving error message that Quant 3000000017 for storage bin OPEN can not be counted.
Pls replay as soon as possible.
regards
rk

Hi
The inventory counting is based on the storage bin, therefore as you
noticed correctly transaction LX16 will list all materials per bin
independently from additional selection criterias.
Even if you select for only one materials you will still get the
other materials on the bin(s) as well. The only way to get a quant
like inventory counting is to use the cycle counting with transaction
LICC. Please also read the online documentation for this
topic 'CC-inventory on quant level'.
Regards,
Ramana

Issue :Storage bin is not trigger in TO

HI
I have totally two storage bin, i did PO- GRN, iam trying to do trasfer order . but system is not trigger storage bin during the
transfer order
1) how many storage bin required for creating transfer order.
2) iam trying to manage stock in one storage bin ,is it possible ?
with regards
dinesh

Hi,
yes, you can use one storage bin till u don't have mention capacity of bin.
WM bin search strategy
Storage Bin Search Strategy is failing
http://help.sap.com/saphelp_470/helpdata/en/c6/f83fe54afa11d182b90000e829fbfe/content.htm
Kuber

Specifying storage bin for quality inspection.

Hello all,
I am wanting to move a material, that is stored in multiple storage bins in our warehouse, into an inspection lot.
I can create a 322 movement in MIGO however this doesn't specify storage bin location, it looks at the warehouse as a whole.
So can you please help me to specify the storage bin that I am wanting to create a manual inspection lot on.
Regards,
Chris

you cannot do quality inspections of bins, you can only do quality inspection of material stock .
the quality inspection in QM module is carried out at inventory managment level.
an inspection lot is created with QA01.
This moves the stock into quality inspection.
Along with the MM posting, a WM posting change notice (PCN) is created to move quantity from unrestricted use to Q-status in WM too. you then process this PCN with LU04 transaction. Here you allocate the quants that are effected.
when the inspection is done, then a usage decision is made with QA11 transaction, which creates again a PCN in WM.

Delete Storage Bins

Hi,
While configuring an SAP EWM Add-On, I had mistakenly deleted storage bins via the transaction /scwm/ls11.
Now whenever I try to recreate the bins I get an ABAP error.
I realized that the storag bins got deleted from the table /SCWM/LAGP , but the same were not deleted from the table /SCWM/HUHDR
So everytime I try to recreate the storage bins, the system throws up an error saying that the entry already exists in table /SCWM/HUHDR.
Please Help.
I'm in a soup here.
Regards,
Oritra

Hi,
The data corruption would be causing this issue. I tried to replicate the same, but, It is not happening for me. Can you share Data Browser screen shot of a single bin. that helps me to understand bit more deeper.
As a alternative solution, If you could able to delete the record in /SCWM/HUHDR table with the help of ABAPer, then you will be able to create the bins again.
Before getting delete the records from here, Cross verify whether the HU exists in the system or not. If the HU Exists with zero stock, then only delete.
you can delete the HU from Warehouse Monitor Screen.
Regards,
Sathish

Storage bin should display in MB52

Hi All,
    Storage bin should display in MB52 T-code warehouse stock dispaly, Please guide me how it possible...
Regards
Hari

Hi Hari,
MB52 Tcode is only for display stock in Inventory Management Level/ storage location level. If you want display stock in storage bin level, you can use t-code :
1. LX03   - Bin Status report
2. LS26   - Total Stock per Material (Warehouse Management)
3. LS24   - Bin Stock per Material
I hope it can explain your problem.
Pls rewards point if helpfull.
Thanks
Gunawan

Not all payment history showing in FD33 or F.35

The payment history flag was set at customer level at time of go-live in 4/2007, but not all payment history shows with transaction FD33 or F.35. No changes were done to customer affecting this flag.
I was able to confirm payment history was applicable to the customer back to 2007 because the DEV environment is old backup and shows data back 2/2008 to 4/2007. The QE backup is more recent (still old) and shows data 8/2007 to 12/2008. Production only shows 4/2008 to 9/2009.
Is it possible to configure the system to show ALL payment history? How does the system determine what to show? I found another customer that shows 4/2007 to 4/2011. What's the difference between the two customers?
Regards,

SAP provides table KNB4 Customer Payment History which permits 16 entries per customer/company code. Therefore, anything older than 16 periods with values will drop off.
The customer that had more than 16 entries was because two company codes had entries. (The company code itself does not show on the screen). Still only 16 entries were permitted per company code.

LT03 - Force storage bin assignment for bulk storage area

Hi experts,
I know... why use a bulk storage area if you want to manage storage bin?! I don't know!
But this is the problem, in LT03 I need to assign a value to the VLENR field (storage bin) but this value is lost in recap and in the flow.
I've try various exit but never able to export this value.
I've try with BADI WM_ENHANCMENT but is only provided for SAP internal use.
Could you help me please?
Anima

VLENR is not a storage bin number but a storage unit number (SU), so it is meant to be used if your storage type (from which you pick) is SU-managed (see SPRO - storage types definitions, T331-LENVW = 'X').
If you want to influence the way the system chooses the storage bin to pick from, you can use customer-exit MWMTO004 ("Own stock removal strategy").
regards

PSE8 not enough storage error

I keep getting the same error over an over again. Everytime I try to add Texture to document I get the "not enough storage error". If I close out PSE and reopen it then it will work again for a little while. Then it errors again. I have plenty of storage capacity so I am not sure what is causing the error. Any ideas as to how to fix this?

In PSE8 editor under Edit->Preferences: check Performance settings:
*taking the cursor/mouse on each option words will display the description of that option:
Modify the default settings as per your needs:
1) Set the total % PSE can use of available RAM.
2) reduce the number of history states (Undo states)
3) Under scratch disks area in case you have more than 1 drive do check so it can use memory from more than 1 drives of your machine.
After making this changes close PSE and launch again.
I am sure memory performance should improve. Let me know if you have any comments.
-garry

No Availabilty Check can be carried out

Dear All,
While do the availablity check for material, I face an error :- "No Availability Check can be carried out for Material XYZ".
As per my opinion,if this material is blocked with some sales transactions like Sales orders & Delivery,it will show the same.
How to rectify this problem and why it is coming ? Kindly Elaborate.
Best Regards,
Ankur

Hi
First of all No Availability Check can be carried out for Material XYZ
This is not a error message and it is a information message
This comes while sales order creation because
Say Material X plant 1000 and user A is entering a sales order and hes has not finished sales order creation still in VA01 transaction only
Say the available qty for thar material is 25 units and user A has put 20 units and has not pressed enter
Now user B creates another sales order for same Material X and same plant 1000 say for 15 units
Now for user B the system will throw this message No Availability Check can be carried out for Material for material X
Because the system doesnot know at the time of user B craeting sales, what is going to the order of user A and it cannot do Availabilty Check for two sales orders simultaneously for the same material in same plant
To control this only , define material block for users in we have Availability Check in sd--basic fns in img
Once the user A comes out VA01 t code and pressed enter for that material the system then can do Availability Check for user B or otherwise settings are reqd define material block for users in we have Availability Check in sd--basic fns in img
Regards
Raja

I would like to carry out perfect deletion of an iPhone composition utility.

Hello.
I am using the mac version of an iPhone composition utility.
http://support.apple.com/kb/DL1465?viewlocale=ja_JP
iPhone composition utility 3.5
It is - Mac OS X.
A machine is macbook pro.
Intel Core 2 Duo.
Mac OS X Linon 10.7.3.
Installation is completed normally,
Warning of the purport there "there is no information in the beginning about failure and this problem" when general and qualification information are filled in and it performs "it writes out."
And although the composition profile was installed from the tab of the "composition profile", even if it pushes "installation" button on an iPhone composition utility, it does not react.
I would like to carry out perfect deletion of an iPhone composition utility.
It is completely about a once and iPhone composition utility.
I would like to initialize.

Apple does not do this at all.
ONLY the carrier to which it is locked can unlock it.
You should probably not leave this much information about your iphone on a public forum.
You will need to ask whomever sold it to you who the carrier is.

Not all storage bins in LX16 transaction Carry Out continous inventory

Similar Messages

Maybe you are looking for