LT03 - Force storage bin assignment for bulk storage area

Hi experts,
I know... why use a bulk storage area if you want to manage storage bin?! I don't know!
But this is the problem, in LT03 I need to assign a value to the VLENR field (storage bin) but this value is lost in recap and in the flow.
I've try various exit but never able to export this value.
I've try with BADI WM_ENHANCMENT but is only provided for SAP internal use.
Could you help me please?
Anima

VLENR is not a storage bin number but a storage unit number (SU), so it is meant to be used if your storage type (from which you pick) is SU-managed (see SPRO - storage types definitions, T331-LENVW = 'X').
If you want to influence the way the system chooses the storage bin to pick from, you can use customer-exit MWMTO004 ("Own stock removal strategy").
regards

Similar Messages

Multiple storage bin location for single material in material master

HI experts
1) we have a senario for our cliant , for which it is required to enter a 6 or 7 storage bin locations for a single part which is created in materials master without having a WAREHOUSE MANAGEMENT .
2) User can enter a quantity while doing GR in to that all locations.
3) reports based on stock avialble in all storage locations ( like MMBE)
Kaustubh

Storage bin used in IM is stored in table MARD. Key fields in table MARD are: client/plant/storage location. So you can have only one storage bin for a plant/storage location combination - even if you want to have more.
If you want more than one storage bin per storage location you have to use warehiuse management.
That's all.
Edited by: Csaba Szommer on Jul 26, 2009 12:35 PM

Storage bin not found (enter storage type) L3398

Hi,
We have an very critical issue. We have gone live on 14th , only one day before. Now our system is showing the message
"Storage bin not found (enter storage type) L3398.""
We have defined Open storage type in our system where , mix storage is allowed. There are 10 bins in this storage type. There is not capacity check for these bins. Now system is not searching bin from Open storage and we have stucked with TO creation. System is not allowing us to created any TO.
KIndly do the help
I will be very thankful if reply fast.
Regards,
Manish I

Hi MANISH,
Though there exists many storage bins , the system is not able to find these bins because proper storage unit type is not defined.
System identifies the destination based on the following criteria :
Activate Storage Type Search
Activate Storage Section Search
Activate Storage Bin Type Search
Go through the below customising for better understanding :
SPROLogistics ExecutionWarehouse Management--Strategies
Maintain the Warehouse Management 2 view of Material master with Palletization data .
Thanks,
Swamy H P

LT03 for Bulk Storage Types

Dear SAP-Experts,
we use ECC 6.0 with WM. First we create an outbound delivery with VL10a/VL01N, after that we create the TOs with the LT03. We are using storage units(SU) and one SU is one palett. When we create an outbound delivery with 2 paletts the system only created 1 TO. But I need 2 TOs. Is there something to change in the customizing? Should I use an User Exit?
A picture what the system is doing with a bulk storage type:
But this is what I need:
Thanks a lot.
Walter

Hi Walter,
I have never used the split profile in Bulk storage type earlier however i used TO split for other storage type and it works fine for me and i hope the same should work for bulk also. find below the setting which is required to define the TO Split
From the below node select --Define Profile
Define the profile for Performance Data
Select Profile for Transfer order splitting
Sort profile for TO splitting
in my opinion VLENR should work for you however there are multiple option available you can click on the match code button and have a look for other parameter
Define the movement type,Source storage type , Destination storage type and Profile for the TO split which was define in the above steps

[WM] Putaway strategy for bulk storage type SU-managed

Hi Gurus,
I need your help
I have a Bulk storage type with SU-managed. I would undestand the real behaviour of putaway strategy B.
1) Case 1: assume that in bulk storage type there are the followed bins (rows):
- in bin XX1 there is material AAA
- Bin XX2 is empty
In this situation if i receive material AAA, putaway strategy B chooses the bin XX1 by background processing - correct!
2) Case 2: assume that in bulk storage type there are the followed bins (rows):
- In Bin XX1 there is material AAA
- in Bin XX2 there is material AAA
- in Bin XX3 there is material AAA
In this situation if i receive material AAA, i don't undestand the behaviour of putaway strategy B. Seems that the system chooses in random way the bin (XX1, XX2 and XX3).
P.S: the storage unit type is one of default - E1.
Can you help me?
Thank very much

You told
Addn to Stock: X
Block upon placement: empty
Then How can you have Case 2?
In Bin XX1 there is material AAA
Next time also stock goes to XX1 only not XX2 unless you overwrite manually.
What does your block strage structure looks like? i'm sorry but i don't undestand your question.
Go to OMM4 "Define-Block struct." and look No. SUs for your St. bin type, SUT & Bulk stor Ind.

WM how to determine storage bins manually for a multi row transfer order?

Hi to everyone. in our WM configuration, SAP system is posting transfer requirements automatically according to goods receipt. After that, we want to post transfer orders with reference to recently created transfer requirement.
We prefer to use Logistics> Logistics Execution> Internal Whse Processes> Transfer Requirement> Display> LB12 - For Material Document
Then choose the transfer requirement we want and press "TO in foregr." button. For single material documents, there is not a problem, we can easily determine the storage bin(s) we want to transfer materials. But in multi material transfer orders there is not an option to choose storage bins in "Create TO from TR: Overview of Transfer Requirement" screen. it is expected from us to "generate TO item" and "save" without entering any storage bin addresses. after that, system automatically send materials to storage bins according to customizations and the material master data.
I want to know, if there is a possibility for us to choose the storage bins we want in multi material transfer orders which are created from transfer requirements. Any help will be highly appreciated.
Thanks in advance.
Mehmet Akif EREK
İDO SAP MM Responsible.

Standard program: RLVSDR40
Standard report: LVSLESCHEIN
The path for configure the documents that we want to print when we create transfer orders is: SPRO --> SAP REFERENCE IMG button --> Logistics Execution --> Warehouse Management --> Storage Units --> Activities --> Define print control.

Storage Type Search for Multiple Storage Types

Hello experts.
I have an issue that I cannot seem to resolve.
Background
- We are using kanban strategy 0006 in order to move materials from Plant A to Plant B. Plant A is warehouse-managed but Plant B is not.
- Within Plant A we have one wm-managed Storage Location with many Storage Types.
- Within Plant B we have two Storage Locations ( each one representing a separate, physical building ).
- A majority of the kanban materials in use only have one Supply Area assigned to them. However we have approximately 15 materials that have multiple Supply Areas assigned to them. This is because these materials are common parts across two different Storage Locations in Plant B. As a result, they also have two different Storage Types assigned to them in Plant A ( the source of the material ).
Problem
Because we have common materials in two different Storage Types, the Storage Type Search (defined in OMLY) does not always return the correct Storage Type for the Stock Removal Strategy.
I understand that this occurs because the Storage Type Search is defined based upon the Warehouse Number, Removal/Putaway Indicator and the Storage Strategy. Therefore both Storage Types will use the same Storage Type Search when determining the Destination Storage Type for the transfer order.
FYI, here's an example :
- Material 123ABC is defined in Plant A, Storage Location SL00, Warehouse WH1 with Storage Types ST1 and ST2.
- Material 123ABC is defined in Plant B, Storage Locations SL01 and SL02.
- Material 123ABC has Supply Area SA1 for Storage Location SL01 and Supply Area SA2 for Storage Location SL02 defined for kanban.
- Material 123ABC has Stock Removal Strategy 003 assigned in the WM1 view for Plant A, Storage Location SL00 and Warehouse WH1.
- The Storage Type Search sequence defined for Stock Removal Strategy 003 is Storage Location SL01 then Storage Location SL02.
- When I execute kanban for Material 123ABC for Supply Area SA2, the Destination Storage Type for the transfer order should be ST2. However because the Storage Type Search is based upon the Warehouse (and not the Storage Type level), the Destination Storage Type for the transfer order is ST1 because it is the first item in the Storage Type Search sequence.
So my question : does anybody know how I can resolve this issue? We don't want to adjust our master data for these materials or supply areas. Is there a USER_EXIT that we can implement that will account for this condition?

Hi Mathew,
Based on the storage location indicator you can maintan different storage types for picking and putaway. I think your scnario willl be addressed using this indicator.Please explore this option before going for User exits.

Multiple storage bin for single material

Hi,
We wanted to assign multiple storage bins in the material master as the material is stored in mutilple storage bin in the same storage location. We are not using WM.
We want to resolve the issue without implementing WM.
Please advice where and how do we maintain the same.
In plant data / stor 1 view there is a provision for maintaining only one storage bin.
Thanks,
Reddy

it is not possible without WM.
As workaround :
You either create for each storage bin a storage location,
or
you active batch management and let the batch work as bin.

Replenishment From SU Managed Bulk Storage Type

Hi Experts,
We are trying to implement Immediate TO Creation Random Bin Management from a SU Managed Bulk Storage Type.
Our scenario is the following:
We have a SU Managed Bulk Stype: Stype 702
We have a SU Managed Stype with Putaway Strategy "P": Stype 701
We have material 11000026 and we define the following in WM View 2:
Max Qt: 6000
Min Qt: 2000
Replenishment Qt: 3000
Whenever a delivery TO from 701 is confirmed, and the stock level of material 11000026 in SType 701 drops below the Min. Qt, we need the system to immediately generate a replenishment TO: 3000 kg from Source SType 702 to Destination SType 701.
So far we have done the following:
Created a WM.Mov.Type 721, for which Manual TO creation is not allowed and with Ref.Stor.type Search 721.
We defined Replenishment Control for SType 701: with Replenishment Mov.Type 721 and Replenishment Technique 2.
Created SType Indicator with Operation A and Ref.Stor.type Search 721; in the sequence the first and only SType is Stype 702.
We assigned the SType Indicator to Material in WM View 1.
Whenever we actually confirm a delivery TO from 701 and the stock level drops below the min Qt., the system is not generating the immediate TO. What is the correct configuration or how can I achieve our request?
(The configuration described above works perfectly between STypes that have both the same Putaway Strategy, "P")
Thank you,
Leonidas Oyaga

Hi Mihailo,
Just tried running Tx. LT0R. I get Error Message No. L3009: "no destination storage bin to be found in storage type 701."
(Before doing this, I deleted ID Point 711 from SType 701).
I believe the issue is related to the relationship between SU Managed Bulk SType (702) and SType 701. In 702 stock in a storage bin can be identified based on the SU. However, when creating the TR or OT the system is not able to find a destination storage bin because the quantity taken from a storage bin in 702 is greater than the max quantity allowed in a single storage bin in 701. As if when picking the quantities it is trying to deliver the whole quantity to a single storage bin instead of transfering each SU (1000 KG per SU) to a different storage bin.
For Instance:
Material 11000026 Stype 701
Min Qt: 2000
Max Qt: 6000
Replenishment Qt: 4000
Storage Bin Capacity in 701: 1000
When stock level drops belowe Min. Qt, and the system tries to do replenishment from 702 by delivering 4000, the system is not able to find a storage bin in storage type 701 because it excedes the storage bin capacity.
Best Regards,
Leonidas Oyaga

Create the stock in storage bin level

Hai all
 while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
regards
satish

Dear Satish
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
 --> Maximum weight
 --> Total capacity
 --> Fire containment section
 --> Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .
Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
Thanks
G. Lakshmipathi

Creating dynamic storage bins

When you define a movement type, you can set up the system to create dynamic storage bins in the assigned interim storage area. In this case, the system uses the document number which triggered the stock movement as the coordinates for the interim storage bin.
For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
These coordinates only exist as long as the quant is in the interim storage bin; afterwards, they are deleted.
Where do I do the config for the above scenario..
I tried creating bins for interim storage typees in LX20....after creating an interim storage area through referencing standard ones in IMG... I cant understand how the system creates dynamic bins for the movement type. Please help

LX20 is for static bins.
The dynamic ones are created automatically by the system when the stock is moved to the area.
In the movement type configuration in the WM:
(LE -> WM -> Activities -> Define movement types)
Select your movement type and warehouse and make sure the SCR box is checked
Also check that the field is mapped correctly for the dynamic bin in
LE-> WM -> Activities -> Define Requirements
Field Name is what is grabbed

Storage Unit & Storage Bin

Dear All,
How to make that one storage bin can have serveral storage unit?
Such as we want one storage bin can contain three pallets.
regards
Gang

Hi,
There is no restriction on using any no. of storage unit types for a storage bin. Storage unit types are defined at warehouse level. The path is Logistics Execution -> Warehouse Management -> Master Data -> Material -> Define Storage unit types.
You can define any no. of SUT for a warehouse. Now these SUTs are assigned to materials in material master WM view 2. And materials are linked to bins. SO, whatever materails you have for a bin the SUTs for those materials are all valid for that bin...
Hope this is of some help for you..
Regards,
Noopur

Missing definitions for block storage control

Hey guys,
I am trying to transfer my material from a temporary storage bin in storage type 001 to a bin i created in storage type 004. When I go into transaction lt04 and try to do the transfer i get the following message.
Missing definitions for block storage control (B1 001 1)
Message no. L3082
Diagnosis
Certain information on block storage control is missing in your system definition.
There is no definition for the sectioning of the storage bins in block storage according to storage bin type, storage unit type and block code.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
I have setup the storage bin types and storage unit types. I do not know what the block code is however and I do not really understand what is being asked of me. Any help would be greatly appreciated. Thanks in advance

Hi Fernando,
I had the same problem, everything was correct but the system showed the same error. I changed the material data in transaction MM03, View warehouse Management 1, i inserted values the field "Bulk storage indicator" and the field "Allow addition to existing stock". Other change was in the Storage Bin in transaction LS02N, the storage Bin type should be the same as Storage Unit Type defined in SPRO (Define Strategy for Bulk Storage)
Best regards,
Alejandro

Storage bin does not exist

Hi Experts,
While doing the goods issue while confirming the production order (Mvt 261), i am getting error message for the component " Storage bin 01 does not exist (check your entry) Message no. L9 009"
I dont know why it is only checking storage bin as 01, where as stock is maintained in other bins also,
Whether i am missing any point in this.
Pl help.
regards
Utsav

Hi,
Find out why movement type for a component is looking for 01 as storage bin.
I am also finding out this issue.
It must be some fixed bin assigned at storage type level in material master.
I checked in MMR, but no fix bin is assigned in WM2 view. Field is blank. No entry is maintained.
Or check movment type setting what is the source
Where to check this?
Also check any storage bin created for production supply storage type.
Where to check this?
Also youmay need to check any special Movement indicator in material master WM 1 view.
This field is blank in MMR.

Is it possible to Extend the Storage Bin Length from 10 Char to 25 Char

Dear Experts,
We have a Requirement for Extending the Storage Bin Length from 10 Character to 25 Character.
Question 1:
Is it possible to Extend or Not?
Question 2:
Even if we extend what will be Impact on the Current Storage Bin Numbers used now.
Thanks for your support in Advance.

No, you can't change length for storage bin field in standard and also it is not suggestable to client. If client forcing on requirement, You can suggest like below.
create one more field for EXT.storage bin by using enhancement and do one customized report for show as , storage bin number+EXT.storage bin = actual storage bin.
For only client reference you do this report and in standard reports it will not show like this else tell to client ---> it is not possible, because it is replicating and using at different programmes.

LT03 - Force storage bin assignment for bulk storage area

Similar Messages

Maybe you are looking for