Not being billed at advertised price -- after two agents still wrong

I ordered 15/5 FIOS online at a promotional rate. After receiving my first bill, however, none of the promotional discounts are being applied. I have talked to two agents, and both have said they had to open a "ticket" to fix my bill, but after over a month, nothing has been fixed. I am being charged $45/mo higher than I should be, and have both the order confirmations, and the advertisements of the rate, that show what my bill should be.
Can this please be escalated to someone who can fix my bill?
Thank you.

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board. you will find a link to the private board where you and the agent may exchange information.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Similar Messages

Any method not allow to change PO price after do the GR

hi,
Any method not allow to change PO price after GR had done. Thanks

Hi jo jo,
To disallow any price changes, set the Tolerance Key limits for Price Variance (PE-Price Var in Purchasing) for PO in IMG to Zero. This will compare the new price (Effective Price w/ Cash Disc) to the material price in the Material Master. Also set the msg no. 207 (in App Area 06) as a "E"-error message. This will stop end users from making changes.
If the Tolerance limits are set to zero and the message 207 is set as E, it should work.
Let me know if this was helpful.

HT1807 I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How dan i be sure that i am not being charged for roaming?network , I am still showing a network

I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How can i be sure that i am not being charged for roaming?

Make sure data roaming and cellular data is turned off. If you don't want to receive calls or SMS then put your phone in airplane mode and reactivate WiFi

CP and BP is not being created in E-Recruitment after PFAL

Dear Experts,
I need your valuable insight into the below issue:
We are implementing SAP E-Recruitment in our company and we have a stand alone system for e-rec, i.e. I2-B scenario. Release 604.
We defined the process model, filter groups as described in note and many threads here. We are able to transfer (distribute) objects O, S, C, Q and QK using PFAL. When I am trying to distribute object P (IT0000, 0001, 0002, 0006, 0009, 0105 and 1001), object P is getting created with PA infotypes but system does not create the CP, BP and NA objects in E-Rec. My understanding after reading the documentation and some threads on SCN is that system should create these objects (CP, BP and NA) on distributing Object P from ECC.
Do we need to Run the HRALXSYNC program in E-Recruitment to create these objects? We thought of running this program as well but the Employee Check box in the selection screen of the program is disabled. Even after implementing BADI HRALX_HRALXSYNC_BADI it remains disabled.
Any sort of help would be greatly appreciated...
Kind Regards
Syed Aijaz

Dear Salil,
Thank you for the quick response.
I had considered maintaing the number ranges for CP in E-Recruitment, but had two concerns/doubts about it:
1. We have already generated CP in ECC for all Persons and the numbers are taken from an internal range Subgroup ($$$$) and CPs have their own IDs starting with 5XXXXXXX. Now if I maintain a number range in E-Rec, different from this, would that be an issue? I understand that we need to have the same CP ID in both the systems (ECC and E-Rec). Kindly clarify.
2. We have not maintained any number ranges for other objects (O, S, C, Q, & QK) in E-Rec system. But system has created these objects in E-Recruitment on running PFAL.
Currently we are doing all these settngs in Sandbox system only.
Kindly advise....
Thanks
Edited by: meetaijaz on Feb 1, 2012 9:38 AM

Emails not being kept on server anymore after installation of office 365

since installing office 365 my emailsare no longer kept on the server The settings om outlook havn't changed and they should stay there for weeks Any suggestion ?

I'd check to make sure it's not set to download/delete email from the server when fetching it, just in case.

Photos not being shown on my iphone after upgrading to IOS5

Hi there,
I have just upgraded my IOS to IOS5 and upon doing that i can see that I am not able to open up my photos.
or in other words it is showing empty and saying "You can take photos and videos using camera, sync photos and videos onto your iPhone using iTunes"
Please can somebody help me out. I have had some very good photograph in it.
Thanks

Before you upgrade the iPhone, you are asked to make a backup. During the upgrade you are asked if you want to restore from your backup. I guess that didn't happen?
iTunes does not store your photos; it syncs them. You should have been transferring your photos fom the iPhone to your photo application. They should be there.
If not, your only chance is to restore from backup, if you have a recentone, as noted above.

HT1473 I am attempting to import my CD's but I'm finding some songs and albums are not being accepted. Any ideas what I'm doing wrong?

After attempting to import music from CD's I am seeing that some of the tracks are not listed in my iTunes library and in some cases, whole albums are missing. Any suggestions on what I am doing wrong or how to correct?

Now that we've established that you have the CD correctly imported into iTunes, we can move on from there.
Connect the iPod to iTunes. When it shows up as a Device (in the left window of iTunes) select it. You will be looking at the Summary tab (or pane).
On this pane, my choice is to have the option to Sync only ticked songs and videos selected. I recommend this option for you. This is relevant to the next step.
At the top of the pane select Music. On this pane, check the options for Syncing. You need to have Sync Music selected and then choose either Selected Playlists (which will only put your choice of Playlists onto your iPod) or Entire Music Library. If you select "Entire Music Library" then all your songs (one exception) will be transferred to your iPod.
The exception is: if you un-tick a song in your iTunes Library, then at the next Sync, it will be removed from the iPod but kept in your Library.
Any luck?

My iPod Touch is not being recognised by iTunes or my computer, yet still charges. I have done EVERYTHING.

When I plug my iPod in, my computer makes the 'ding' noise. However, neither the computer or iTunes actually recognises that there is anything there, yet it still charges.
This iPod is BRAND NEW. I havn't even had the chance to ACTIVATE it yet. I installed the latest version of iTunes. I have tried THREE different USB cords, and EVERY USB available. I have restarted my computer. I have restarted the iPod. I have waited until it was charged. I have spend about HOURS going through Apple Support, and looking up alternative solutions from people having a similar problem. Most of their problems were fixed by wiping the iPod... mine isn't even activated yet.
Solve this one, Apple. WITHOUT sending me a replacement.

Is iTunes version 11 installed? Just do not say latest.
Did you try everything here?
iOS: Device not recognized in iTunes for Windows
including here
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Next try another computer to help determine if you have an iPod/cable or computer problem
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Firefox not working when PC wakes up after sleep but Chrome is working.

When laptop wakes up from sleep, already opened tabs in Firefox are not getting connected to internet. After two minutes opening a new Firefox window is connecting to internet. But this problem is not happening with Chrome.

When you are doing this, set the drive to never sleep, slider completely to the right and display sleep to something like five minutes. Or just hit Control-Shift-Eject, to sleep the display. Uncheck "put the hard disks to sleep..." That said, the firmware on the externals may be spinning them down. But this shouldn't be happening if they are being written to.
System Preferences> Energy Saver.

Being billed for a phone I don't even have anymore

I visited Rome at the end of January, where my phone was stolen. I immediately suspended my account, and deferred billing until the account was reactivated. From what I read, the phone would be reactivated in 30 days, but it wasn't. And then I received a bill for the months of February and March. My service is still suspended, and last I looked was suspended until June. I was never notified that even if service wasn't reconnected, I would still have to pay for a phone that I no longer had. Since I'm living in Turkey currently, I can't just call the customer support line, and they seem to have removed the option of support by email. How am I supposed to dispute these charges?!

You are not being billed for the phone, you are being billed for the line of service you purchased on your 24 month contract. You can suspend service for a few months with or without billing. If you suspend with billing, you will continue to be billed but the months left on your contract will continue to count down. If you suspend without billing, you will not be billed, but the months left on your contract will remain constant until the suspension ends. The suspension will automatically end after 3 months, I believe. If you have no intention of using the line, you could pay the remaining ETF to cancel the line. Or, you could cancel any data plans or texting plans or insurance, etc. and get the cost down to around $14 per month and just "ride it out" until the end of your contract.

Policy not being applied to users

I have a group policy that used to work, but now has decided it does not want to be applied to the workstations anymore. I don't know what may have happened to make is stop working.
It's a pretty restrictive policy for students. I have the exact same policy for two other groups of students that still work. All three policies were copied from the same set of files. In other words, I make a change to one, then copy the files to the other two because they reside on different servers. Yes, I do open each one in C1 to update the timestamp.
When I run wmsched, the policy is there in the list, but the settings are not applied. I can log in to the PC with one of the other student accounts and their policy is applied.
The login I'm using to test with has R rights to the policy location - the same rights that the other users have to their policies. I have also tried more rights with no different results.
The DLU part of the policy runs, and I have turned off the windows firewall. I have also created a brand new policy from scratch to rule out any corruption in the old policy and I get the same results.
Apparantly, my workstation policy for this group is not being applied either. The other two groups' policies apply like they are supposed to. So this means that neither policy assigned to this group of students/workstations is working.
Any ideas?
Thanks

FishEggStew,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

IPod not recognized (for sync OR charging) after OS 4 upgrade

I upgraded to OS4 on Saturday July 10th with no problems. On Sunday (July 11) I used my iPod quite a bit. I was at a friend's house and the battery was getting low so he charged it through his computer. It charged completely and we continued using it the rest of the day. I plugged it in to my PC to charge it Sunday night and it was not recognized at all (for charging OR for syncing) through any of the USB hubs. I asked my friend the method he used to charge it that day and he confirmed it was via computer. Monday night I tried charging it through a friend's iMac. It charged halfway, though it still wasn't recognized. Tuesday morning I tried to charge it on the same computer and I got the "too much power drawn from the USB hub - HUB deactivated" message on ANY of the HUBs. It still doesn't work on my own home computer (though it HAD been working Friday night and Saturday morning pre-OS4 installation).
I'm personally running Ubuntu 10.04 but obviously only was able to charge the iPod on that system. Anytime I want to sync or download music I restart to Windows Vista (and iTunes).
I do also have apps installed, but nothing new from the previous OS - (I know that blaming third party apps is a common cop-out answer for apple techs).
I hope this wasn't too confusing. My real problem is simply described by my subject line: iPod not recognized (for sync OR charging) after OS 4 upgrade. What follows is simply everything I've done to troubleshoot. The only thing I haven't tried is restore...because my iPod isn't even recognized by iTunes.
I would greatly appreciate any help or stories related stories/situations. Strength (and hopefully solutions) in numbers!
Best,
Dan

Assuming you haven't got the cords mixed up with another, older iPod, it sounds like you have a couple of problems:
1. Your computer's USB ports have quit working. Reboot your computer and see if they reactivate.
2. Your friend's iMac generated that message because you tried to charge the device from the low power keyboard USB port. iPods need to be charged off one of the main USB ports or a powered hub.
3. iPods not being recognized by iTunes can be caused by 1) wrong cable; 2) non-functioning USB ports; 3) iTunes not being the correct version for the iPod OS; and finally 4) Apple Mobile Device Services driver is either stopped, missing, or disabled.
To troubleshoot a problem with Apple Mobile Device Services, see the Apple support article: http://support.apple.com/kb/TS1567

Hp v235r flash drive not being detected on my computer

Hi,
I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

Hello budda48,
Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
Open Computer Management by right clicking on Computer and clicking Manage.
Click on Disk Management. Give it a moment to open the view of the drives installed.
Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
Right-click the unlabeled drive and click Change drive letter and paths…
Click Add and then click OK to select the first available drive letter.
If the Change drive letter and paths… option is not available, make sure that the drive is Online.
If the drive is Offline, right-click the disk number and click Online.
Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
Remove the pen drive from the computer if it’s attached.
Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
Choose the Advanced tab and click on Environment Variables… button at the bottom.
Under System Variables, click on the New… button
Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
Click OK on all the open windows to close them out.
Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

Ax service is not being start

ax service is not being start in my laptop after restored data of the production
server.
error is

ax service is not being start in my laptop after restored data of the production
server.
error is
This forum is related to SQL Server not AX services. Please post in relevant forum. Please don't post one line incomplete question if you cannot show any effort to ask good and clear question why should we put effort ?
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

IMac does not see my external hard drive after recent update

Is there a reason why my external hard drive is not being 'seen' by my iMac after the most recent update to the system?

managed to solve it myself after reading some other information on other forums.
Powered hard drive and iMac down, plugged hard drive in, turned on iMac, connected hard drive. Bingo.

Not being billed at advertised price -- after two agents still wrong

Similar Messages

Maybe you are looking for