Photos not being shown on my iphone after upgrading to IOS5

Hi there,
I have just upgraded my IOS to IOS5 and upon doing that i can see that I am not able to open up my photos.
or in other words it is showing empty and saying "You can take photos and videos using camera, sync photos and videos onto your iPhone using iTunes"
Please can somebody help me out. I have had some very good photograph in it.
Thanks

Before you upgrade the iPhone, you are asked to make a backup. During the upgrade you are asked if you want to restore from your backup. I guess that didn't happen?
iTunes does not store your photos; it syncs them. You should have been transferring your photos fom the iPhone to your photo application. They should be there.
If not, your only chance is to restore from backup, if you have a recentone, as noted above.

Similar Messages

  • When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

    when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

    All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
     Cheers, Tom

  • HT1386 I can't use my iphone after upgrading to IOS5

    Can someone help?  I can't use my iphone 3gs after upgrading to ios5.

    I have iphone 3 GS.  I upgraded the software to ios 5 and the phone is now can't be accessed.  All I can see is the Gray screen says Iphone.  It ask me to set it up, choose your country, wifi, etc.  when I did that, it always stop at the page where it says "Apple activation server is down, please try it again".  Tried so many times but the same messages kept showing up.  Connect it to Itunes, itunes said there is no sim card installed.  I went to AT&T to get the new simcard and it still saying the same thing.  don't know what's wrong with it.

  • Channel Photo Not Being Shown

    I am having problem with a podcasting feed not pulling the channel icon into itunes. It is 600x600 as apple recommends and you can see it by just putting the URL below into a browser. Here is my XML for the channel, if anyone has any suggestions I would greatly appreciate hearing them. This podcast has been approved about 2-3 weeks and adding content has not been a problem.
    Thanks,
    Andy
    <channel>
    <title>JazzStories</title>
    <link>http://www.jalc.org</link>
    <language>en-us</language>
    <copyright>2010 Jazz at Lincoln Center</copyright>
    <itunes:subtitle>JazzStories</itunes:subtitle>
    <itunes:author>Jazz at Lincoln Center</itunes:author>
    <itunes:summary>Jazz musicians refer to what they do as telling stories. JazzStories brings the musicians own words to their music. Wendell Pierce takes us backstage for after-hours sessions and conversations</itunes:summary>
    <itunes:owner>
    <itunes:name>Jazz at Lincoln Center</itunes:name>
    <itunes:email>[email protected]</itunes:email>
    </itunes:owner>
    <itunes:image href="http://www.jalc.org/podcasts/images/podcastjazz_storieslogo.jpg" />
    <itunes:category text="Music" />
    <itunes:explicit>no</itunes:explicit>
    <atom:link href="http://www.jalc.org/podcasts/jalc_podcast.xml" rel="self" type="application/rss+xml" />

    Your feed references the podcast image correctly. It's become apparent from the number of similar posts that there is an ongoing problem with the Podcast Images. They were always slow to appear, but in some cases it's been weeks with no results.
    There isn't really anything you can do yourself - your feed is fine. I would recommend you and anyone else with this issue to contact iTunes Support. You won't get an immediate resolution, but if a lot of people complain it may kick-start them into doing something about it.
    Go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to 'Express Lane', which will guide you eventually to some contact options.

  • After upgrading to iOS5 - phone ear speaker is NOT working

    Well, my excitement from upgrading to the new iOS5 on my iPhone 4 gave way to frustration when I found out that the phone's built-in ear speaker is no longer working. Tried everything from a hard reset, to re-syncing with iTunes, playing around with every setting I could find, and a few "fixes" I found online that were absolutely useless and did nothing.
    This only appears to happen when making or receiving phone calls (and listening to voice mail) - when I select speaker, all audio plays normally, but clicking back over to headset, and nothing. Earbuds also work okay. 
    Prior to installing iOS5 this problem did not exist in the least.
    Apple - I am going to ASSUME you properly beta tested this OS on ALL compatible devices prior to its release, did you not? Apparently (from my web searching) I am not the only person suffering this malfunction with their iPhone after upgrading to iOS5.
    Is there anyone out there that has figured out a way to fix this, or am I just screwed? I don't know how to revert back to iOS 4.3.3 if that's even possible at this point.  This is a phone I use for work, and I need to have this functioning properly.
    Please help. Anyone... thank you. 

    I'm having exactly the same problem with my iPhone 4. Since the upgrade to IOS5, I've noticed I can no longer hear calls through the ear-piece, though using the speaker phone option works fine.
    I took my phone to the  Apple Store in Sydney and they advised that the problem was related to my sim card & that I should contact my telco for a replacement. I seriously didn't believe the Apple rep when she said this, but politely said thanks, went home and tried it out by swapping my sim with my wife's.
    Guess what... it didn't make the slightest difference.
    My wife has an iPhone 4 still running IOS4 and the ear-piece works fine. I even put my sim card into her phone and it worked fine as well. So the issue is definitely not related to the sim card.
    It sounds like a common issue affecting a lot of iPhone 4 users that have upgraded to IOS5. I'm surprised Apple hasn't acknowledged this and have a patch available to correct (it doesn't sound like a hardware issue).
    Anyway, looks like a trip back to the Apple store for more great suggestions.

  • Some photos not being synced from Mac to iPhone

    Some of my photos are not being synchronised to my iPhone. This includes certain photos within some iPhoto albums and some entire albums. I have tried to see if there are any problems with the photos which have not been synchronised, but they seem to be fine. No unusual characters in titles and no corrupted images, they seem just the same as the photos which are being synchronised. Anything I should try before getting in touch with Apple support? I've tried creating new albums to synchronise, deleting photos them reimporting them to iPhoto and even re-setting my iPhone, but exactly the same problem with exactly the same photos.
    iPhone is running latest firmware (1.1.2), using latest version of iPhoto and iTunes, synchronising with my Mac Pro running 10.5.1

    One thing to try.
    Export the photo, from iphoto, that will not sync to the iphone.
    Make sure the file name has an extension. (something like .jpg or .bmp)
    Import the photo back into iphoto.
    Now try syncing the photo to the iphone.
    Hope this helps.

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • Planned Order for a Product not being shown

    Hi Experts!!
    I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
    Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
    I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
    Please help me out. Your help is highly appreciated. Thanks a lot!!

    Hi Srinivas,
    With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
    I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
    As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
    and COMMIT_CONTROL(should be 'E').
    Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
    Thanks,
    Santosh KB.

  • How do I resolve the issue of a 2nd generation iPod touch not being shown on iTunes 11.4?

    2nd generation iPod not being shown on iTunes 11.4
    How do I resolve this issue? I have tried reinstalling after uninstalling it, nothing has worked for me any advice?

    Well, go ahead and try every port, make sure to clean out the port with a q-tip, to make sure no dust is blocking the ports.
    Then enter DFU, if iTunes doesnt recoginze it when your in DFU, that means you charging input is damadged.
    Hope this help

  • Sent E-mails not being shown

    Hi, I have a MBA and since yesterday all the e-mails that I have sent are not being shown in the sent folder. I sent one to myself and I got it so it must be working but how can I see them again after I sent them? Oh and the other problem is that search function does not work the way it used to. When I typed in one word it would show me all e-mails that had that word in them including the ones from e-mail adresses with which had the word in the adress.
    Does anyone know how to get this to work?
    That would be great! Thanks!
    P.S.: English is not my native language, sorry for mistakes

    Hi McGrey24,
    A couple of important questions to get us on the right track.
    1.) What type of email account are you using? Who's the service provider?
    2.) What are you using to search? The Spotlight feature inside mail or the OS-wide Spotlight search?
    The Mail search requires a little tweaking, by default it doesn't give you access to your entire account just specific mailboxes. There are ways to control if you want to search all mailboxes or if you're looking for the text string as the subject (or just content).

  • Device not listed in find my iphone after updating my apple id password

    how to track my iphone5 that is already lost and when i sign in icloud my lost device is not listed in find my iphone after updating my apple id password. i also enabled icloud and imessage and facetime in that iphone using my current apple id that i used in icloud. pls help me

    If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
    If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account.  You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then  on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

  • PDF Export Options not being Shown

    Need to export to pdf again. Last export was for only 6 pages, as a test. Now want to export the entire document. However, only 6 pages are created in the export. No options to revise the pages, are presented.
    The iD app is acting strangely, in that many other options are not being shown. Also, on loading a document, there are notes about hyphenation and missing LILO. Beginning to believe I need to reinstall.
    Pleae advise best course of action at this point.

    before you reinstall, see if trashing the prefs helps. See Replace Your Preferences

  • Read and deleted messages are not being updated on my iphone 4s

    I have a new user who is having a synchronization issue with his iPhone.  When he reads emails on his desktop, the messages on his iPhone 4s show as being unread.  Also, when he delets messages on his desktop email, messages are not being deleted on his iPhone.  I have never seen this issue before and do not know what to do.  Please help.  Thank you!

    The end user just started with the company a week ago and he is using Outlook 2010.  We never had this issue in the past.  Active sync has been enabled on user’s account and he was able to configure the firm's Exchange email profile on his iPhone.  Although he is able to receive messages on his mobile device, it does not sync with his desktop email.  I asked him to delete the profile on the device and create it again, but he wants to do that as a last option.

  • In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown

    In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown :
    How to display the tabs in shared views also.
    I just wanted to created one shared view that will look like Inbox but filter data for State = 'Completed'

    Please update me if you can find any way to achieve this in BPM workspace

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

Maybe you are looking for

  • Display Blank Tablix when using multi value parameter in SSRS 2008 R2

    I have a main report which contains tablix1 and tablix2. Tablix1 is using DataSet1 and Tablix2 is using DataSet2. I have a multi value parameter set up with 71 items to choose from. My company owns 71 convenience stores and what I am doing is compari

  • BAM integration with BPM 11gR1

    Hi, I am trying to integrate BPM 11gR1 with BAM starting with a simple scenario as am a newbie with BAM. The requirement is to generate a report for tracking a BPM process and whenever a new instance of a BPM process is created, the report should be

  • Supplier Information in Insection Lot

    Dear Experts, User wants to record the data like supplier test certificate number, supplier lot number, conductivity mentioned by supplplier etc., during the inspection. There may be max two values for each of the above. Please suggest the suitable s

  • Ovi Store Re-download Error

    I got my N8 replaced at the local Nokia Care with a brand new handset. However, I do have one problem and was wondering if you guys know anything about it: When I am in Ovi Store, and I try to re-download all my previously installed applications it c

  • Install cannot launch due to previous 'install log file'

    Ive recently purchased CS6  Design standard, after I had some problems with my CS 5 suite. Now when I try and instill it, as the install sequence launches it says that  'Installer failed to initialise'. I've used the Adobe Spport Advisor and it says