Not Displaying "Net Sales" key figure in Crystal Report

Hi All,
I have made one Info cube (with Characteristics -Product, Region and Customer and Key Figure - Net Sales) from Flat File.
I want to make crystal report on this. For that i have connected this infocube in crystal Reports via OLAP Connectivity. I am getting all the characterisitc in Field Explorer and one more Field "Measure" in which two field is displayed:
- Measures, Level 0
- Measures, Level 0 (long)
Now i have dragged all the characterisitcs in detail section with Measure, Level 0(long). While i am viewing the preview of this, i am not getting value of that line item.
Ex.
Product Region Customer NetSales
Actual one:
AC East BigBazar 14000
with Measure, Level 0(long):
AC East BigBazar NetSales
with Measure, Level 0
AC East BigBazar [Measures].[ZNETSALES]
I am not getting 14000 i.e. Actual value.
Hope i am clear with my idea. Am i missing something?
Regards,
Rishit Kamdar

col1 col2 col3 col4 col5.......say you have 5 columns
for the denominator calculation
the value should be
numerator /
select (select count(column) from table) - (select count(column) from table where column<>0)
Thanks,
Ganesh

Similar Messages

  • Exception color can not display at another key figure in BEx query desinger

    I have a report requirement, the user want to display the average price on each month ,such as:
    Jan.   Feb. Mar.  Apr. etc.
    100    105    104   95   ....
    and the user want to compare each other months with Jan's price.
    they want to display the exception color when the rise or down rate greater or less than 5%.
    Now ,I can only change the output structure such as:
    Jan.  Feb. Rate2-1                 Mar.  Rate3-1                 etc.
    100   105   (105-100)/100=5%  104    (104-100)/100=4%  ....
    Now I can set Exception on the formula Rate2-1 Rate3-1....
    But the Exception color can only display on Rate2-1,Rate3-1...
    and Not the Keyfigure Feb. Mar...
    I am using the BI 7.0 and the new Query Designer.
    Who can help me to solve this question .
    Thanks.
    Yours Youming.Zhao

    Hi,
    its simply not supported for BEx Analyzer. Exception reporting on another key figure is only possible for Web Reporting.
    Check this actual SAP Help Link:
    [Restrictions in the BEx Analyzer|http://help.sap.com/saphelp_nw70/helpdata/en/45/5038f28cce08d2e10000000a11466f/content.htm]
    Sorry that i dont have a better answer
    Cheers

  • Bex Query calc key figures in Crystal report not showing technical names.

    Hi,
    I have created calculated key figures in a BEx query for which the data comes from a SAP BW cube. I have assigned each of the calculated key figures a proper technical name which I expect to see when I bring it to crystal report. When I bring that query in Crystal as a data source the calculated key figures show a wier network id names instead of the technical names. I am having a problem in using those wierd technical name in my report and my formula's as I am not able to identify what is what.
    Please urgent help requested.
    Thanks
    Mahendra

    I dont have an account on such website. I will explain u the problem in detail.
    When I create a calculate key figure in SAP BEx query designer I assigned a technical name to it, a meaningful one. In my case one such example is Actual_revenue is the name that i have assigned and the description is Actual revenue. When I create a crystal report from it and in that report if i create a formula.
    I get this {ZIC_COPA_Z_SALES.[Measures]-[25V1KYL4VE92X0T4OMHVYM90V]}
    If u see it its a wier 25 digit name.
    Instead of this I want to see
    {ZIC_COPA_Z_SALES.[Measures]-[ACTUAL_REVENUE]} which is what I have given in the query. I am using the SAP BW MDX driver to connect to Bex query.

  • Restricted Key Figure in Crystal Reports

    Hi Gurus, I have to implement the Restricted Key figure logic in Crystal reports. I am able to filter the data at a report level but I need to filter the key figure with a particular characteristics. We try to implement this logic with subreport but client is forcing us not to use subreports. Please help me.
    Thanks
    Sasi

    Hi,
    you should make the restricted keyfigure as part of the BW query and Crystal Reports will leverage it.
    Ingo

  • Net Value Key figure in Service Level: Order Items OSD_C12

    Hi,
    I'm trying to set up the Sales Analysis Business content for my Customer but I don't get the Net Value key figure to work. My customer uses TS as price unit (1 TS = 1000 PC). The net price are set to 35EUR / 1 TS. In BW the Net value don't consider the price unit and the Net value 3700EUR on the order is displayed as 3 700 000EUR.
    Another problem is that the price is not always defined in TS. Some times the price is defined by PC.
    Regards Kristoffer

    Hi,
    I'm trying to set up the Sales Analysis Business content for my Customer but I don't get the Net Value key figure to work. My customer uses TS as price unit (1 TS = 1000 PC). The net price are set to 35EUR / 1 TS. In BW the Net value don't consider the price unit and the Net value 3700EUR on the order is displayed as 3 700 000EUR.
    Another problem is that the price is not always defined in TS. Some times the price is defined by PC.
    Regards Kristoffer

  • Added new key figure in the report

    Experts,
    I have added new key figure in the report .If i display this key figure value in the report it is populating correct value with ERROR(example 22.5 ERROR).The report is on the multiprovider .i have check the value for this in multiprovider it is populating correctly .There is no calculation in the report for this .While extracting in to report i am getting this. Help me to resolve this issue.
    Thanks
    Murali

    Hi,
    I have already created a formula like NODIM(Key field).that only i am using .
    and mapping I did in this way. I went to multiprovider and I have selected this key figure and right click and select (assign) then I have click on create proposal for all infoobjects option.
    Please suggest any thing need to do.
    I am sorry .I did not understand the lonterm solution suggested by you .what is UOM .Please tell me how to map.can you pls tell me clearly please
    Thanks
    Murali

  • Display Document from BI Server in Crystal Report

    Hi all,
    I accessed BI Query from BI server in Crystal Report. We can upload any comments or documents to the query. I want to display the document and comments in Crystal Report from the BI server.
    Is it possibel? If possible how can i do this?
    Thanks & Regards,
    Hemalatha J

    As I see there was no response on these issue although it is marked as answered. I'll give a hint for the ones that might want to try this.
    One could extract the metadata and documents from the tables names to be found in the tables SDOKLOTAB and SDOKPHTAB (as an example, for InfoObject documentation we have the tables BDSLOIO8, BDSLOIOT8, BDSLOPR8, BDSPHIO8 and BDSPHF8) or one could export the metadata from the BI repository (though, this is a manual approach).
    Edited by: marius.grunca on Apr 27, 2009 5:58 PM

  • Data not matching for a key figure in ODS and In CUBE.

    There is one key figure ( Net Units) where in the data is not matching in ODS and in CUBE for only one particular fiscal week (200714)but for the rest of the weeks its matching.
    The data  is  first loaded in to ODS and from there in to CUBE and the source is from flat file.
    The cubes are not compressed .so I checked the DB aggregation in the field selection for output screen but still it’s not matching .( based on the infocube addition property some times if a file is loaded multiple times it adds up in the infocube so when the cubes are not compressed we manually select this option) .
    What might be the possible cause for this ???
    thanks in advance
    jayakrishna

    HI,
    By any chance if you have loaded same the delta twice into the cube, then there might be the chance of the corrupt data. SO identify the lowest level of document where u can identify the difference.I mean if possible 0calday wise or document leve wise or sales org wise etc. and try to find out where is the difference. Then check in the change log of the oDS, whether the request has gone into cube twice. last option is selectively delete the data from the cube for the week and load a full repair from the ODS for that week.
    Sriram

  • How can i display all the Coloumns (Key Figures) in the Report's same page

    Hi All,
    I am currently working on the BI 7.0 reporting. In the BEx Query Designer report, I am having 13 coloumns (7 Key figures and 6 Formulas) in the report. It is now displaying 10 coloumns in the First page of report. The other 3 coloumns can be seen by clicking on the next page. But the requirement is to see coloumns in the SAME PAGE.
    Are there any settings OR any other thing in the Query Designer, which can enable me to see all the coloumns on SAME page. The users are not interested in scrolling next page for 3 coloumns.
    Appreciates the Quick help/Response, please.
    Regards
    Ramana

    In Web Application Designer, for the properties of your analysis webitem under the Paging category, change parameter 'Number of Data Columns Displayed at Once' (BLOCK_COLUMNS_SIZE) to 0.  This will make all columns show instead of paginating as it is doing now.

  • Could not release my own Key Figure from DP to SNP

    Hi SAP Experts,
    As requirement, I have to run forecast for three Key Figures in Demand Planning (DP): Z_FK1, Z_KFK2, Z_FK3. Unit of measure of these Keyfigure are VND (currency Viet Nam Dong).
    I added these Key Figures to DP Planning Area with name Z_DPPlan01.
    I created a new Planning Area in SNP with name: Z_9ASNP02 by coppying from the standard 9ASNP02. Then I added the above Key Figures (Z_FK1, Z_KFK2, Z_FK3) into Z_9ASNP02 planning area.
    After I runing forecast in DP, I tried to release value of three Key Figures into SNP with tcode: /n/sapapo/mc90. Although system informs that u201CRelease successfully executedu201D, nothing released from Z_DPPlan01 to Z_9ASNP02 when I check in SNP Planning book.
    Question is:
    How to configure Key Figures in SNP and DP (Sematic, Key Figure Function, Category, Category Groupu2026)  so that we can release all three above Key Figures from DP to SNP?
    Thanks very much for your help!
    Duyennx

    Dear Pawan,
    2 . The business requirements are:
    Our customer is a bank that has many branches. They want to forecast for each branches:
    - The Total money (all denominations) will be issued in next quater (Z_KF1). This base on historical data (Z_HIS1)
    - The total money (all denominations)will be received in next quater (Z_KF2). This base on historical data (Z_HIS2)
    Base on these forecast KFs, we need to calculate the Average of Total money will be received and Issued in next quarter (Z_KF3 = (Z_KF1+ZKF2)/90.
    90 is the number of days in a Quarter.
    We need to release the three KFs from DP to SNP for further calculation and reporting. As said previously, I added three time series KFs Z_KF1, Z_KF2, Z_KF3 to SNP Planning Area (Z_9ASNP02)
    If could not release, we can coppy. But the problem is that: in DP, beside standard characteristics 9AMATNR and 9ALOCNO, we also added more custom characteristics like Z_TYPE (to generate CVCs and to drill down money by type (cotton, polymer, coin)). So when I run the Tcode /n/sapapo/tscopy, despite of the fact that in u201CCharacteristic Assignmentu201D I only assigned 9AMATNR and 9ALOCNO from source to target, system show message like:
       3 combinations not contained in target master planning object structure
    Message no. /SAPAPO/MSDP_REL108
    Diagnosis
    Characteristic combinations exist in the source planning area's master planning object structure that are not contained within the master planning object structure of the target planning area.
    System Response
    The source data of these characteristic combinations is not written to to the target planning area.
    So, How to copy with my case?
    4.Please Explain more about:
    u201CCreate a third custom category group containing your custom category, and add this under 9AMALO. Give only your category group name & Semantic should be 000u201D
    4.1.I can creat a custom category group under menu path:
    SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Supply Chain Planning u2192 Supply Network Planning
    u2192 Basic Settings u2192 Maintain Category Groups.
    But where can I create my custome category? Is this menu path:
    SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Global Available-to-promise (Global ATP) u2192 General Settings u2192 Maintain Category
    In this path, I can see to folder:
    -u201CSAP categoriesu201D: We could not create new category in this folder
    - and  u201Cnon-SAP Categoriesu201D: I can press button u201CNew Entriesu201D and key in Data like:
    oCategory: TT
    oCategory text: TT
    oCategory Description: TT
    oSort String: 99
    oCategory type: Requirements (I also tried with Forecast, Stock, Receipt)
    And then, press u201CSaveu201D button. But system always create message:
    u201CEnter values in work area for non-key fields
    Message no. SV174
    Diagnosis
    An entry has been made for a non-key field in the view or table, which does not satisfy a selection condition stored in the Dictionary or made in the maintenance transaction initial screen.
    System Response
    The values entered cannot be accepted.
    Procedure
    Ensure that your entry is correct. This data record will not be displayed if you use the same selection conditions again.u201D
    I donu2019t know what wrong here. How to create my custom Category? Here is u201Cnon-SAP Categoriesu201D, Is there any problem if we create category with this type?
    4.2 How to add custom Category Group under 9AMALO? Which T-code we use?
    5. By the way, Please clearly explain for me:
    5.1. What are differences between u201CTime series live cacheu201D and u201COrder live cacheu201D?
    5.2. What are differences between releasing KFs from DP to SNP and copying KFs from DP to SNP?
    Thanks very much for your help!
    Edited by: xuanduyen on Dec 31, 2011 4:38 AM

  • How to display Non Cumulative key figure data

    Hi,
    I want to check if there is any data for a non-cumulative key figure. While i am trying to display the data from cube or Multi provider, it is not showing this field. is there any way to check the data for this field other than using reports.
    Regards,
    Vishnu

    Hi,
    Take Eg: Quantity of valuated stock - 0VALSTCKQTY it is combination of
    Quantity Received into Valuated Stock- 0RECVALSTCK and
    Quantity Issued from Valuated Stock-   0ISSVALSTCK
    In report you can see only  0VALSTCKQTY Keyfigure.
    And the above Two Keyfigures are filling by Routines using Process Keys.
    This is for 0IC_C03 and data you can check in MB5B Tcode in ECC.
    Check;
    Note 745788 - Non-cumulative mgmnt in BW: Verifying and correcting data
    Thanks
    Reddy

  • Header condition type value not displayed in sales order output

    Hi gurus,
    I have observed a strange issue regarding a header condition in a sales order.
    we have a set up like following:
    1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output.
    2. If the Header condition mentioned in above point is not maintained in sales order it should print the total price of all line items.
    Though i have maintained the header condition value in Sales Order Header its not displayed in SO output.
    That is , I have a sales order and it has one HEADER condition type entered with 3500 USD.
    In fact this value is used for some business purpose and is being printed on the sales order output for a specific output type.
    But where as in a sales order this header condition value is not getting printed on the output though I am using same data as of the sales order which is having the header condition value printed on its output.
    According to business,we must have the header condition value printed on  sales Order output.
    Please suggest how to proceed.
    Thanks in advance.

    Not sure if you are using costom smartform to print invoice, if yes then ask developer to debug and find the root cause and fix it.
    You might need to give him condition when it shuld be printed and when not.
    You can take reference of another output type for which it is printing

  • Condition value is not displaying in sales order

    Hi Friends,
    when i am creating sales order, condition type(JEXP,JECP,JA1X..) is displaying in cond.type column and percentage(14%,2%,1%) is displaying in amount column and
    the condition value is not displaying in cond. value column in conitions tab of  sales order.
    In analysis it is showing as condition record found...
    please help me...
    with regards

    Hi,
    can it be that you have a problem with units of measure? Often, if there is no value in Condition value, the problem is in the master data of material. Did you use standard schema? If you not, have you tried it with standard schema? What is your value under "per" and "UoM"?
    Regards Thomas

  • Report painter- Characteristic can not be maintained with key figures

    We have added new characteristic ZZFIELD1 in CCSS report sructure for reporting and selected it in gen. selection list. While running report painter report, it gives an error that ZZFIELD1 cannot be combined with key figures.
    Any help to figure out what step is missing will be highly appreciated.
    This is a PS report painter report using PS database profile in the selection of parameters for the report
    Thanks

    The fields we have added is ZZFIELD1 ZZFIELD2 in the PRPS table. And the key figures used in the report is;
    AWKG - variance/accrual costs (basic key figure) with characteristic version 0, value type 32, fiscal year and period
    SWKG - cost (basic key figure) with characteristic version 0, value type 4, fiscal year and period.
    SMEG - quantity (basic key figure) with characteristic version 0, value type 4, fiscal year and period.

  • Sales Order no is not displayed in Sales Invoice

    Hi Experts,
                     I  want Sales Order No to be displayed in Sales Invoice of PLD. How could be done? Please guide me.

    Hi Shailesh......
    Please do this...........
    Create a UDF in SO and apply the below FMS in this created UDF.
    Select $[ORDR.U_UDF.0]
    This will copy the SO no. in this UDF and when you copy this SO to Delivery or next document this SO in UDF will also flow in Invoice and from there you an get it into PLD......
    Regards,
    Rahul

Maybe you are looking for