Not enough memory issue while acquiring data

Hi all,
I am trying to acquire audio data @ 50KS/s for 20 sec. using the PXI 4498 card in the PXI system. To acquire data I am using the DAQmx functions.
Step1 : Created DAQmx channel
Step2: Set the no. of sample to read as 20X50=1000000 to the DAQmx Timing function
Step3: DAQmx Read funtion to read the data. (Set the timeout as 20x2=40Seconds)
PLease find the attached screen shot of the block diagram.
Issue is sometimes I am facing the memory issue when I run this VI. Popup saying that "Not enough memory to complete this Operation" is getting popup and the Vi getting stop abruptly. Kinldy look into the screen shot and suggest me the apprapriate method to read the data at mentioned acquisition rate.
Note: The problem is not consistent. Sometimes I am facing the error and sometimes not.
Thanks in advance
Giridhar
Attachments:
Block diagram.jpg ‏208 KB

I think actdi is talking about loading an external database directly from the XML file using the jdbc XML driver, correct? I have not tried this yet, but am curious as to the results.
http://docs.oracle.com/cd/E17904_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDFIJEH
Hope this works.
Enjoy!
Michael R.

Similar Messages

Memory dump while loading data

Hello,
We are facing memory issues while loading data in BW system.
This particular loading process is taking more than 4GB (3GB of EM and 1GB of heap) and still failing.
We cannot increase the memory beyond this. Can you please suggest a way to load the data ?
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          09.03.2010 22:15:49
Error analysis
     The internal table "{A:2*\TYPE=%_T00003S00000114O0000015636}" could not be
      further extended. To enable
     error handling, the table had to be delete before this log was written.
     As a result, the table is displayed further down or, if you branch to
     the ABAP Debugger, with 0 rows.
     At the time of the termination, the following data was determined for
     the relevant internal table:
     Memory location: "Session memory"
     Row width: 1140
     Number of rows: 30824
     Allocated rows: 30824
     Newly requested rows: 8 (in 1 blocks)
How to correct the error
     The amount of storage space (in bytes) filled at termination time was:
     Roll area...................... 14627872
     Extended memory (EM)........... 3004121016
     Assigned memory (HEAP)......... 1000024976
     Short area..................... " "
     Paging area.................... 24576
     Maximum address space.......... 4294967295
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "TSV_TNEW_PAGE_ALLOC_FAILED" " "
     "GP44XYX8R5ZMOGVGGMHG0U1U04O" or "GP44XYX8R5ZMOGVGGMHG0U1U04O"
     "CONVERT_FROM_MEMORY"

Try to load by reducing data package size.
I think you have some routine in transformation/update rule. Check that whether you are using "SELECT *" in that. It may be one reason for this error.
You can check OSS Note 396642, 379266 and 997930.
Edited by: Pravender on Mar 10, 2010 1:09 PM

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

CR2008 Not enough memory while exporting reports from Crystal Reports 2008

I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
    <sectionGroup name="businessObjects">
      <sectionGroup name="crystalReports">
        <section name="printControl" type="System.Configuration.NameValueSectionHandler" />
        <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
      </sectionGroup>
    </sectionGroup>
</configSections>
<businessObjects>
    <crystalReports>
      <printControl>
        <add key="url" value="http://myserver/mysite/PrintControl.cab" />
      </printControl>
      <crystalReportViewer>
        <add key="documentView" value="weblayout" />
      </crystalReportViewer>
    </crystalReports>
</businessObjects>
<appSettings>
    <add key="CrystalImageCleaner-AutoStart" value="true" />
    <add key="CrystalImageCleaner-Sleep" value="60000" />
    <add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
    <httpHandlers>
      <add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
    </httpHandlers>
    <compilation debug="false">
      <assemblies>
        <add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
        <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
      </assemblies>
</system.web>
<system.webServer>
     <handlers>
         <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
     </handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
     Report.Close();
     Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.

The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM

Export report Excel-Data Only works not,'not enough memory for operation'

Hi all,
we are using in our Software CrystalReport Version 11 Service Pack 5. Crystal report is intergated for .NET. We can not uninstall CrystalReport Version 11 Service Pack 5 to install another Version or another Service Pack.
We are haveing problems to export report as Excel 97-2000 Data Only, "not enough memory for operation" message pop up after you try to export report as Excel data Only.
Export Report as PDF is working fine.
This problems are on Windows XP Sp3 and Vista. On Windows 7 we have no problem.
Please, can somebody help me solving this problem, or to finde a workaround for Windows XP. Memory from PC is not the problem.
Mit freundlichen Grüßen / Kind regards
Odisej Nujiq

Odisej, unfortunately, processes such as remote sessions are reserved for phone cases only. You can create a phone case here;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Also, just as an FYI, see the blog [What are these 'support' forums good for anyhow?|/people/ludek.uher/blog/2011/04/07/what-are-these-support-forums-good-for-anyhow]
Without phone support, you are left to do most of the foot work your self. On the forums, we can provide suggestions and guidance, but that is about it.
Couple of things to note though. If you do create a phone case, one of the 1st things that you will be asked is to update your app to SP6 - unless you can prove the same issue exists with SP6 (see more bellow).
Something I would recommend you try is to take an XP box, install SP6 on it, then install your app on it. If this works, your options are highly limited. E.g.; SP6...
One other utility that may be worthwhile to use is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx]. Run that on the XP box. In the logs, look for "Access Denied" error messages. Look for load or other issues with crxf_xls.dll, exportmodeller.dll and crtslv.dll.
From your responses I am still not sure if you actually did run Modules and compared the results. This is much, much easier to do than working with ProcMon and I'd start there. To summarize, my troubleshooting plan (irrespective of the limits imposed on you) would be:
1) Use Modules as this is the easiest thing you can do
2) Try this with SP6 - more work that (1) above, but at least you are on the latest. If this works, banging your head into an SP5 wall will do you no good (like I said, irrespective of what ever limits...)
3) Use ProcMon - not too difficult, but time consuming as you will be looking over 100s, possibly 1000s of lines and not being familiar with details of CR, this will take time.
- Ludek

Data stream from OEM device, TCP/IP "not enough memory"

Hi Everyone,
I'm trying to catch a data stream from an OEM device over a TCP/IP link. I can start the data stream, or pause/resume it, but the OEM device determines when the data stream has ended. The data stream begins, and within 20 seconds, I get the famed "not enough memory" error. Once this happens, data is lost from the stream, and quite often the final message indicating completion is missed. I see two solutions to this. 1) Watch how many bytes are backed up on my TCP/IP port, and issue a pause command until I can process the backed up bytes at which point a resume will be issued. ...or 2) Use my application's memory usage in the same manner. Does anyone know how to do either of these things?
Thanks much

Hi Toader,
Thanks for your response.
1) I'm not sending any data. I'm trying to consume an incoming data stream which is being driven by an OEM device. This device basically has an FPGA hooked up to a 100Mbit/s hose. You can start it, pause it and resume it. Those are the available operations related to consuming the data stream. I think the crux of the problem is deciding when to pause the OEM device to give the LabView app a chance to process and store the accumulated portion of the data stream.
2) Sure, but it's not my program and is large and complicated. I guess I could write my own program within a program, but I would rather use the existing architecture. I might write my own micro app, but I doubt it will keep up with the FPGA driven hose. If I could detect the condition leading up to the "not enough memory" error, which it seems many LV developers have encountered, but not really solved, then I could issue a pause to the OEM device.
3) Well using a LabView application under a 2Ghz Windows box may not be sufficient hardware. But I really think it's the Windows operating system that I'm having trouble with, not the hardware platform.
I've tried several counters in the LabView application, watched task manager before/during/after the "not enough memory" error, and downloaded an interesting app called taskmanager.vi in an attempt to get something to correlate with the error message. I've not succeeded yet. Here's what I think is happening. The Windows OS is managing my wireless hardware, when it receives a TCP/IP packet, it puts it in the Windows Message que of my LabView application. I think the "not enough memory" error relates to a Windows OS allocation for my message que which is being exceeded. Any Windows programmers out there who would know how to look at the application's message que during runtime?
Thanks for your classic suggestions Toader, I may try a micro app which is spawned by the main app when its time to grab the data. My intuition is that no software limited by the Windows OS is going to keep up with single minded FPGA hardware.
I thought this very interesting discussion was the answer and it may still be, but after trying 30+ various counters under Memory, System, Process, TCP, and Server, none correlated to the error.
http://forums.ni.com/t5/LabVIEW/System-monitor-counter/m-p/1653448/message-uid/1653448/highlight/tru...
I also tried a taskmanager.vi, but none of the various flavors of memory tracked by that little gem correlated with the error either. At this point, I started to wonder "what memory was there not enough of?".
Terry

I am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band as my sou d board only while recordinelse'

II am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band only as my sound board only while recording on something else and the. I will delete it.. Real P I A....

How do I upgrade the ram?
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

SBS 2011 Remote Web Workplace issues not enough memory???

Hi,
Were having problems with the RWW website on our SBS 2011 server, users are able to logon, but the connect buttons of the computers are not working, if we click on them nothing happes, no error message, nothing.
When a users logs on we see 5 error messages in the application log of the SBS server, 4 times event 3 appears and 1 time event 1309, all messages say there is not enough memory available (less then 5%). When we close some applications/services and the memory
usage is below 95% the RWW websites works fine and the connect buttons function properly.
This server has 16GB of RAM, beside the standard SBS 2011 installation we installed only anti-virus and back-up software on this server.
We have several other customers that are running SBS 2011 servers, they have less internal memory and sometimes just 98% of free memory, but their RWW websites function without any problems and don't get these error messages.
Can someone tell me how to resolve this problem?
This are the complete error messages:
Logboeknaam:   Application
Bron:          System.ServiceModel 4.0.0.0
Datum:         16-5-2013 10:36:34
Gebeurtenis-id:3
Taakcategorie: WebHost
Niveau:        Fout
Trefwoorden:   Klassiek
Gebruiker:     NETWORK SERVICE
Computer:
Beschrijving:
WebHost kan een aanvraag niet verwerken.
Informatie afzender: System.ServiceModel.ServiceHostingEnvironment+HostingManager/28106152
Uitzondering: System.ServiceModel.ServiceActivationException: De service /Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc kan niet worden geactiveerd als gevolg van een uitzondering tijdens de compilatie. Het uitzonderingsbericht is: Het controleren
van de geheugenpoorten is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt dit probleem oplossen door de belasting van de
computer te verlagen of door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.. ---> System.InsufficientMemoryException: Het controleren van de geheugenpoorten is mislukt omdat het
vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt dit probleem oplossen door de belasting van de computer te verlagen of door de waarde van
inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.
   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   --- Einde van intern uitzonderingsstackpad ---
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
Procesnaam: w3wp
Proces-id: 21252
Gebeurtenis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="System.ServiceModel 4.0.0.0" />
    <EventID Qualifiers="49154">3</EventID>
    <Level>2</Level>
    <Task>5</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-05-16T08:36:34.000000000Z" />
    <EventRecordID>404277</EventRecordID>
    <Channel>Application</Channel>
    <Computer></Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>System.ServiceModel.ServiceHostingEnvironment+HostingManager/28106152</Data>
    <Data>System.ServiceModel.ServiceActivationException: De service /Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc kan niet worden geactiveerd als gevolg van een uitzondering tijdens de compilatie. Het uitzonderingsbericht is:
Het controleren van de geheugenpoorten is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt dit probleem oplossen door de
belasting van de computer te verlagen of door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.. ---> System.InsufficientMemoryException: Het controleren van de geheugenpoorten
is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt dit probleem oplossen door de belasting van de computer te verlagen of
door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.
   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   --- Einde van intern uitzonderingsstackpad ---
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)</Data>
    <Data>w3wp</Data>
    <Data>21252</Data>
</EventData>
</Event>
Logboeknaam:   Application
Bron:          ASP.NET 4.0.30319.0
Datum:         16-5-2013 10:36:34
Gebeurtenis-id:1309
Taakcategorie: Webgebeurtenis
Niveau:        Waarschuwing
Trefwoorden:   Klassiek
Gebruiker:     n.v.t.
Computer:
Beschrijving:
Gebeurteniscode: 3005
Gebeurtenisbericht: Er is een onverwerkte uitzondering opgetreden.
Gebeurtenistijd: 16-5-2013 10:36:34
Gebeurtenistijd (UTC): 16-5-2013 8:36:34
Gebeurtenis-id: 2ce25cc6a90146e8ad0fa32e504b86ef
Gebeurtenisreeks: 134
Gebeurtenisinstantie: 7
Gebeurtenisdetailcode: 0
Toepassingsinformatie:
    Toepassingsdomein: /LM/W3SVC/1/ROOT/Remote-1-130131644927895718
    Vertrouwensniveau: Full
    Virtueel pad toepassing: /Remote
    Toepassingspad: C:\Program Files\Windows Small Business Server\Bin\WebApp\RemoteAccess\
    Computernaam:
Procesinformatie:
    Proces-id: 21252
    Procesnaam: w3wp.exe
    Accountnaam: NT AUTHORITY\NETWORK SERVICE
Uitzonderingsinformatie:
    Uitzonderingstype: InsufficientMemoryException
    Uitzonderingsbericht: Het controleren van de geheugenpoorten is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen.
U kunt dit probleem oplossen door de belasting van de computer te verlagen of door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.
   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
Aanvraaginformatie:
    Aanvraag-URL: https://mail.mannekus.com:443/Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc/js
    Aanvraagpad: /Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc/js
    Hostadres gebruiker: 192.168.10.91
    Gebruiker: MANNEKUS\ITSN
    Is geverifieerd: True
    Verificatietype: Forms
    Accountnaam thread: NT AUTHORITY\NETWORK SERVICE
Threadinformatie:
    Thread-id: 28
    Accountnaam thread: NT AUTHORITY\NETWORK SERVICE
    Imiteert: False
    Stacktracering:    bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
Aangepaste gebeurtenisdetails:
Gebeurtenis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ASP.NET 4.0.30319.0" />
    <EventID Qualifiers="32768">1309</EventID>
    <Level>3</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-05-16T08:36:34.000000000Z" />
    <EventRecordID>404279</EventRecordID>
    <Channel>Application</Channel>
    <Computer></Computer>
    <Security />
</System>
<EventData>
    <Data>3005</Data>
    <Data>Er is een onverwerkte uitzondering opgetreden.</Data>
    <Data>16-5-2013 10:36:34</Data>
    <Data>16-5-2013 8:36:34</Data>
    <Data>2ce25cc6a90146e8ad0fa32e504b86ef</Data>
    <Data>134</Data>
    <Data>7</Data>
    <Data>0</Data>
    <Data>/LM/W3SVC/1/ROOT/Remote-1-130131644927895718</Data>
    <Data>Full</Data>
    <Data>/Remote</Data>
    <Data>C:\Program Files\Windows Small Business Server\Bin\WebApp\RemoteAccess\</Data>
    <Data></Data>
    <Data>
    </Data>
    <Data>21252</Data>
    <Data>w3wp.exe</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>InsufficientMemoryException</Data>
    <Data>Het controleren van de geheugenpoorten is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt
dit probleem oplossen door de belasting van de computer te verlagen of door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.
   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
</Data>
    <Data>https://mail.mannekus.com:443/Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc/js</Data>
    <Data>/Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc/js</Data>
    <Data>192.168.10.91</Data>
    <Data>MANNEKUS\ITSN</Data>
    <Data>True</Data>
    <Data>Forms</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>28</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>False</Data>
    <Data>   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
</Data>
</EventData>
</Event>

Yes, many of our customers use the same anti-virus software, Kaspersky AV 6.0, and the same back-up software, Ashay online back-up.
A reboot temporarily solves the problem but when the memory usage gets above 95% the problem gets back.
This site has about 40 user accounts.
The error message states the following:
To resolve this problem reducethe load on the
computer or modify the valueinFreeMemoryPercentageToActivateService in
the configuration element service
hosting environment.
Where could we check if there is a limit of 5% or less free memory set, which configuration file should we check?

Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.

This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine.

Downloading itunes, I receive the error "there is not enough memory". How do I fix the memory issue?

When dowloadning tunes, I receive the error "there is not enough memory. I've deleted tunes from my library & ipod and I still get the error. How do I get around this?

It could be the newer version of iTunes requires more physical memory than your computer currently has available.
Do a right click on "My computer" and check out your computers memory/RAM specifications.
Windows XP is a bit bloated in the latest updates, trying to get people to upgrade to Windows 7, might be little room for other programs, especially one as huge as iTunes.
If you finally do choose a new machine, I have some tips:
For 3D gaming laptops, I wouldn't pick any graphics card scoring less than 1000 on this sites scale. Not scoring less than 2000 for towers.
http://www.videocardbenchmark.net/high_end_gpus.html
I would also choose a quad core processor scoring 5000 or better on this scale, 64 bit, Windows 7 Pro (so you can virtualize your XP programs) or OS X, and 4GB of RAM expandable to at least 8GB or future proofing your investment.
http://www.cpubenchmark.net/high_end_cpus.html
I would also choose 7,200 RPM hard drives for both towers and laptops for performance. On laptops while using the battery, set the energy savings to stop the hard drive spinning when not in use. Only choose the slower 5,400 RPM drive option if your always on battery and need maximum life as you lose about 20% with the faster drive, but gain 20% or more in performance.
Dual cores and 32 bit processors/OS with their 4GB RAM limit is soon to be old news.
For laptops, I highly recommend anti-glare displays for maximum use in any environment.

Error coming - NOT ENOUGH MEMORY while opening MUS...

Hi
i have bought nokia 7210 supernova , error is coming NOT ENOUGH MEMORY while opening MUSIC PLAYER
can any1 help me in ths plz

i am using nokia 5130 Xpress music mobile.i got same problem,but i take backup file of "settings" from my friends 5130 Xpress music. i restore that backup i get music player again.
So u people also try to get "settings" Backup file from ur friends restore that file,it may be works.............thnx.
MODERATOR'S NOTE: We would like to inform you that we have removed your email address on this post as it is unwise to publish personal details on public forums like this for security purpose.
S.Krishna Chaitanya Reddy

TS1717 keep getting "the itunes library file cannot be saved." there is not enough memory available. then itunes crashes. anyone else having this issue?

error code keeps popping up-the itunes library file cannot be saved. there is not enough memory available. then itunes crashes? anyone else having this issue?

Yes, I'm getting the same issue

I keep getting a "not enough memory" comment on my computer. Where can I look to find out what is taking up the memory while i'm working?

I keep getting a "not enough memory" comment on my computer. Where can I look to find out what is taking up the memory while i'm working?

Are you referring to the message that says your startup disk is full? If so, you need to delete some files from the hard drive, or get a larger hard drive. Moving some files to an external hard drive is a quick and easy solution. Note that you should avoid the temptation to use various utilities to clean up your system or remove parts (like unused languages). That will not free up much space and can easily result in damaging your system.

N70 - Not Enough Memory Delete some data first

Hi,
Could someone please help with a problem that i am having with N70. Messages Empty(All Folders) and no images or media files on the phone memory, al applications also are on the Memory card(1GB and 3/4th of it is free). But still i am getting this message of "Not Enough Memory to eprform the Operation. Delete some data first". Could someone please advise what i could do to resolve this, as now i do not have any log of Calls(missed, rec, dialled), no incoming messages etc.
Thanks in advance.
Regards,
Powi

first upgrade your phone software with the latest available version that you can check here:
http://europe.nokia.com/A4577224
if you have the latest software version,reset your phone by pressing *#7370# in standby mode(after backing up)
NOKIA means:Night Of King In Alone

While updating to 8.1, not enough memory: phone is stuck in update, PC/iTunes doesn't recognize phone. Help!

I tried downloading 8.1 wirelessly(!). No warning about not enough memory. Software downloaded by would not load in phone (4S) - cell antenna went into permanent "search" mode(?). Took phone to PC to download videos to make room for IOS 8.1. iTunes does not recognize the phone. Was able to delete most videos using PC "my computer" and browsing to those files. Phone then allowed me to load 8.1, but now it is stuck on a black screen with the iTunes logo telling me to connect to iTunes: only iTunes still won't recognize the phone! Phone is frozen on this screen. Global reset (power + home button) only turns phone off briefly, then returns to this eternal screen of death.
Help?

I have the exact same problem with my iPhone 4S. HELP!!!
Also I tried Reiboot... and nothing...

Not enough memory issue while acquiring data

Similar Messages

Maybe you are looking for