Not getting fields in logical database of infotypes

Hi All,
I have created Infotype(9xxx) through PM01, and also maintained the screen for this with 6 feilds..
BEGDA, ENDDA, SUBTY, OBJPS, Zxxx1, Zxxx2
every thing is going fine but when im creating logical database for that infotype,
im getting only 3 feilds there
PERNR
Zxxx1
Zxxx2
I need to take all the fields there.. please suggest how to do this?
Regards
Neha Gupta

Solved on own.

Similar Messages

'PERSON is not a node of logical database PNP'

Hi All,
           We are upgrading from 4.6 to ECC6.00.Previously we used the include RPCIPE0D with PNP database in one of the programs and had no errors.Now in ECC6.0,there is a huge change in the code of RPCIPE0D when compared to 4.6C.
           When i use this include in one of my programs with PNP database it throws an error as "'PERSON is not a node of logical database PNP'".Do i have to use PNPCE?If so,plz explain why.

Hi Shruthi,
          Main Program RPCIPE00 of your include program RPCIPE0D is built with the Logical Database PNPCE which has the node PERSON. When you try to activate your custom program with your program as main program, Since the include has the following code in it.
NODES: person, group.
this node will be checked against the LDB provided in your Custom Program.
Regards
S. Balasubramanian

Logical Standby Database Not Getting Sync With Primary Database

Hi All,
I am using a Primary DB and Logical Standby DB configuration in Oracle 10g:-
Version Name:-
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for Solaris: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
We have build the logical standby last week and till date the Logical DB is not sync. I have checked the init parameters and I wont see any problems with it. Also archive log destinations are also fine enough.
We have a important table named "HPD_HELPDESK" where record count is growing gradually whereas in logical standby it's not growing. There are some 19K record difference in the both the tables.
I have checked the alert log but it is also not giving any error message. Please find the last few lines of the alert log in logical Database:-
RFS LogMiner: Registered logfile [oradata_san1/oradata/remedy/arch/ars1_1703_790996778.arc] to LogMiner session id [1]
Tue Aug 28 14:56:52 GMT 2012
RFS[2853]: Successfully opened standby log 5: '/oracle_data/oradata/remedy/stbyredo01.log'
Tue Aug 28 14:56:58 GMT 2012
RFS LogMiner: Client enabled and ready for notification
Tue Aug 28 14:57:00 GMT 2012
RFS LogMiner: Registered logfile [oradata_san1/oradata/remedy/arch/ars1_1704_790996778.arc] to LogMiner session id [1]
Tue Aug 28 15:06:40 GMT 2012
RFS[2854]: Successfully opened standby log 5: '/oracle_data/oradata/remedy/stbyredo01.log'
Tue Aug 28 15:06:47 GMT 2012
RFS LogMiner: Client enabled and ready for notification
Tue Aug 28 15:06:49 GMT 2012
RFS LogMiner: Registered logfile [oradata_san1/oradata/remedy/arch/ars1_1705_790996778.arc] to LogMiner session id [1]
I am not able to trace the issue that why the records are not growing in logical DB. Please provide your inputs.
Regards,
Arijit

How do you know that there's such a gap between the tables?
If your standby db is a physical standby, then it is not open and you can't query your table without cancelling the recovery of the managed standby database.
What does it say if you execute this sql?
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;The ARCH processes should be connected and MRP waiting for a file.
If you query for the archive_gaps, do you get any hits?
select * from gv$archive_gapIf you're not working in a RAC environment you need to query v$archive_gap, instead!
Did you check whether the archives generated from the primary instance are transferred and present in the file system of your standby database?
I believe your standby is not in recovery_mode anymore or has an archive_gap, which is the reason why it doesn't catch up anymore.
Hope it helps a little,
Regards,
Sebastian
PS: I'm working on 11g, so unfortunately I'm not quite sure if the views are exist in 10gR2. It's worth a try though!
Edited by: skahlert on 31.08.2012 13:46

Exclude one field from Logical Database's dynamic selection screen

Hi Guru,
I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
I have use the below syntax in my zprogram.
selection-screen exclude select-options: doc-no.
However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
Please advice.
Best Regards,
Fung

The selection part of the logical database defines input fields for selecting data.
          The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
          Include called DB<ldbname>SEL.
        SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
                                                                SELECTION-SCREEN EXCLUDE ... .
                                                SELECTION-SCREEN END OF VERSION ver.
Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
          SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen.

SQ01 - Name of Manager field for logical database PNPCE

Hi,
I am stumped and need your help.
I have defined an infoset ZZ_HR_DATA with logical database. In the Infotype 0001, under additional selections, I have the field "Name of superior (organizational assignment)" and it's technical name is SYHR_A_P0001_AF_MANAGERN. I am OK so far.
When I define a query against this info type, it is not showing as a field to select. What went wrong?
The query shows another similar field SYHR_A_P0001_AF_MANAGERN and Quickviewer is displaying this as well.
Regards
Venny

I figured this out. User error..
Thanks
Venny

Custom selection field using Logical database

Hi All,
I have to create a program that would print out employee contracts from infotype 16.
I am using logical database PNPCE.
Is there a way to add "contract type" as a selection parameter in the screen that is generated by PNPCE?
Thanks,
~Mark

Hi,
Create CTTYP(Contract type) as input parameter in the program.
Then after GET PERNR.
write check stmt for that field like below.
PARAMETERS: p_cttyp type p0016-cttyp.
GET PERNR.
CHECK p0016-cttyp EQ p_cttyp.
Rewards points if helpful.
Regards,
Srinivas Ch

Customizing user selection fields of Logical database PNP

Dear Gurus,
I had made a z-copy of payslip program for incorporation of Logo. Now we need to put this report in Enterprise Portal (EP). Now since we would not want any user to view any other person's payslip, I need to disable the selection field (PERNR) for user selection.
Problem is this field for user selection is coming from standard Logical Database (LDB - PNP) used in the program. So how can I make this field hardcoded as sy-uname and non-modifiable without making z-copy of LDB-PNP.
Also I wish to harcode Payroll Area writing some code (from table PA000) but again I cannot write this in std. PNP LDB and writing it in driver program will not help.
Thanks in advance.
Regards,
Amit

Write the highlighted coding in initialization ...
initialization .
select single pernr from pa0105
into pernr-pernr
where usrid = sy-uname.
if sy-subrc = 0.
PNPPERNR-sign = 'I'.
PNPPERNR-option = 'EQ'.
PNPPERNR-LOW = pernr-pernr.
Append PNPPERNR.
endif.
loop at screen.
if screen-name = 'PNPPERNR-LOW' or
screen-name = 'PNPPERNR-HIGH'.
screen-input = '0'.
endif.
modify screen.
endloop.
at selection-screen output.
loop at screen.
if screen-name = 'PNPPERNR-LOW' or
screen-name = 'PNPPERNR-HIGH'.
screen-input = '0'.
endif.
modify screen.
endloop.

Could not getting field values from form

hi,
hellow, can you help me for solving the bellow problem
i have form its enctype attribute of form tag is setted as multipart/form-data. when i am submiting this form, i call a request.getParameter(); in the submitting jsp file. But for any controls such as text,checkbox,select box etc could not get its corresponding value.

Its obvious why its not picking up the change in the second action.
Lets see...
Here is your case I
You get the populated form which is also put in the request with updated value from the JSP....
(1)
protected Forward updateGoalObjective(GoalsForm form)
form.setGoalId(44); //int field set to 44
return new Forward("success");
You set one of the fields some other value....in one but how will the second action know about it???
You try to execute the second action and the action grabs the form from the request again. This is the original form submitted by the JSP so you still see that value...
You will have to pass in the customized or processed form for the form to be able to get it...
protected Forward showGoal(GoalsForm form)
System.out.println(form.getGoalId()); //prints 68
return new Forward("success");
In your second case you create a new form...why would you want to do that if you have a form value being set in JSP??
The answer is you should be doing something Like this:
* @jpf:action form="goalsForm"
* @jpf:forward name="success" path="showGoal.do"
protected Forward updateGoalObjective(GoalsForm form)
//other code
form.setGoalId(44); //int field set to 44
return new Forward("success", form);
* @jpf:action form="goalsForm"
* @jpf:forward name="success" path="Goal.jsp"
protected Forward showGoal(GoalsForm form)
System.out.println(form.getGoalId()); //prints 68
return new Forward("success");
}

Not getting field value in Input field of field exit

Hi all
I am using field exit for data element GWLDT in transaction code IE02. But in this field exit I am not getting the value entered in the field "Begin guarantee date(GWLDT)" in the INPUT field of field exit.How I can get the value in the INPUT field of field exit?
Regards
Deepak

Use this statement in source code.
output = input.

Make non-mandatory field in Logical Database 'SDF' mandatory.

Hi all,
I want to make a non-mandatory field 'Chart of Accounts' in Logical Database 'SDF' mandatory in my Z program.
Please let me know how this can be done?
I tried defining the select-option in my zprogram but it gives error saying the parameter has already been defined in LDB.
Regards,
Atrinandan
Edited by: raj on Aug 3, 2009 7:46 PM

Hi,
You can try like below:
at selection-screen output.
loop at screen.
if screen-name = 'NAME OF THE PARAMETER'.
screen-required = 1.
modify screen.
endif.
endloop.
Regards,
Himanshu

Add fields to logical database selection screen

Hello,
Is it posible to add a field in the default selection screen of a logical database.?
I´m using ELM. In the default selection screen, only the lifnr and ekorg fields are shown. I want to show the matnr field, is it posible?
Thank you!

Hello,
If you go to the attributes of report, where you are using Logical Database;
there is a button named 'Report Category', which controls the field on selection screen...
If you select that one you can choose report category and also can create your own category
Thanks

Changing fields of Logical database BRF

Hi;
I have a changing problem
I use brf logical database in my program but I want to change attributes of some selection fields.
Ex:I want to do mandotary year field.I can't dı it.I can add new field but I can't change fields of BRF.
How can I do?

try this:
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    CASE SCREEN-NAME.
      WHEN 'BR_GJAHR'.
        SCREEN-REQUIRED = 1.
        MODIFY SCREEN.
    ENDCASE.
ENDLOOP.
hope tha helps
Andreas

ONLY ONE FIELD DOES NOT GET PREPOPULATED FROM THE DATABASE

I would really, really appreciate if someone can comment or suggest something that would help with the resolution to the issue I am currently experiencing.
Simple sample form that explains the issue can be accessed from the link below.
How to test the form:
Open the form.
Click on the yellow button to add new Task.
The problem is with Additional Product fields ( in blue). You can add as many of them as you want by clicking on the Red button with the +. Add some data and uploade in database. When you download it from the database, data will come back fine for all of them, except for the first one.
Any ideas or help would be greatly appreciated.
https://acrobat.com/#d=2vFWOlm56FmrC4owzpfHew
The code is behind the Red button with the +. Very simple. Perhaps is the indexing issue with the database. I do not know enough about it, to be able to send any suggestion to the DB guy.
According to the DB guy, data uploades without issue. It is the blank field when the form with data is downoloaded.

It might be related to http://forum.java.sun.com/thread.jspa?threadID=583466&messageID=2988344

Fields not getting updated in the database through BAPI enhancement

Hi Experts,
I have added 4 custom fields in the transaction FB60. The fields are getting displayed in vendor line item.
I have to fill these fields from an inbound idoc which uses the BAPI_ACC_DOCUMENT_POST bapi. I have implemented the BADI BADI_ACC_DOCUMENT to pass my custom fields to the bapi and it is processing correctly by adding the custom field values to the extension table that is getting passed to the standard program of the BAPI from the BADI.
But I think, I have missed to append my fields in one of the standard structures. I have added the fields in BSEG, CI_COBL( which is getting called in BAPICOBL_CI, ACCIT).
Can anybody tell me which other standard structure I should add my custom fields so that it functions properly and gets added to the BSEG table.
Regards,
Sangeeta.

Solved on own.

APEX-The manullay created column is not getting updated in the database

Dear all
I have a form on page, which is created along with a report using Form on a Table with Report option. From the form I have deleted one field and recreated manullay as set the property as database column. When I am calling from the report page (using defualt edit option) the value is showing there, but if I am 'Apply Changes' , the column value in database is get updated with null.
Please help
DJ.

This is the SQL and PL/SQL forum.
Please re-post this on the APEX forum.
Oracle Application Express (APEX)

Not getting fields in logical database of infotypes

Similar Messages

Maybe you are looking for