Not getting Full LTE reception

I get 2 to 3 bars tops in 21136, yet going down the street to 21117, i get full LTE. Can this be corrected?

Migdynava wrote:
Thanks for replying, and that is exactly my point, i must be hitting a different tower. I am getting upload of 2.52 mbps / 1.09 mbps download as apposed to 44.64 upload / 46.47 or so download. I want to know if there is any way to be able to connect to the tower that i would get better reception on? or this is one of those that unfortunately, i wont have a choice?
Just because the speed is different does not mean you are on a different tower. You said you are just down the street from where you were getting a stronger signal. This does not mean you are on a different tower. You could possibly be on the same tower, just further away from it and therefore a weaker signal.
Normally, your phone will connect with the tower which has the strongest signal for the area. As you move from one area to another and the signal from a different tower becomes stronger, your phone will switch over to the other tower.

Similar Messages

Snow base station next to imac - yet not getting full strength reception?

I have my snow base station sitting about 1 foot from my imac, yet only 3 out of the four bars are dark. Meaning I'm not getting full reception? Why is this is? I can't say I notice a significant difference in internet usage, but every little bit helps. I only have a cordless 5.8 ghz phone and my Harmon Kardon soundsticks speakers on the same desk. But from what I understand, 5.8 ghz are not supposed to interfere with cordless internet.
Any suggestions?

Duane, I've tried every channel and no improvement. The only thing I have discovered is if I hold the base station in my hand and lift it up above my head - I get full signal strength. However, if I hold it up and place it against the wall (as though I were to hang it), it drops back down to three bars.
Do you think if I got the newest airport express, my signal strength would be better? Or do you think a more insulated ethernet cable would help? Or could it be my imac airport card?
Thanks for your help.

Not getting full 5.1 sound

Hi,
I have a set of Logitech x540 (5.1) speakers hooked up to the integrated sound card on my Pavilion p7 1003w desktop. The problem is I can't get full 5.1 sound out of them. When I right click on the speak icon in the system tray and configure for 5.1 sound, I only get sound out of the front left and right speakers when I click on the Test button, no rear or subwoofer sounds. Can anyone suggest a fix? Thanks
Rick

I just started up ATV and restarted it. When it started up there was an HD 'short' that did light up the Dolby on on my receiver. Actually, this morning I did a software update and when it restarted I got that same 'short' and I'm almost positive that it was 5.1 Surround Sound. I checked it with the HD Trailers, but apparently they're not 'Surround'. I'm just going to watch 'Fantastic Four', I would think it has to work if 'FF' is Dolby Surround.

Not getting full Window for iTunes Store

I have the "Use full window for iTunes Store" selected and it's not working. It is causing most front page section links to not work also. I figured this was some kind of bug because today when I started iTunes it was back at the full window for the first time in months. Then when I clicked on TV Shows it went back to the partial window and links to some items would not work on the main page. I`ve tried uninstalling but nothing seems to work. I can deal with the store in a partial window but hate when the links don`t work. Any ideas?

I fooled around and figured out that it is Roboform password manager that is causing this problem. When I exit the program from the tray icon and start iTunes and move into the store I get full window and all links work.

Not getting full Gigabit Ethernet Speed on iMac Core Duo

I am using Airport to connect to a Linksys Wireless Access Point connected to my DSL modem. I am using ethernet to connect to a 3Com OfficeConnect 8-port Gigabit switch. I have 2x 500 GB LaCie Ethernet Disk Mini's (with Gigabit interface) connected to the switch.
The lights on the switch tell me that the drives and iMac are connected at full speed, however I can transfer a 650MB .dmg file to a firewire 400 drive in 1/4 of the time it takes to transfer the same file to one of the gigabit ethernet drives.
running ifocnfig en0 returns:
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::216:cbff:fe94:747b%en0 prefixlen 64 scopeid 0x4
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:16:cb:94:74:7b
media: autoselect (1000baseT <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
I have no idea what that all means, but i do know that I am not getting gigabit ethernet speed.
Can anyone help?
Thanks

If you are transferring data via wireless then you cannot approach Gigabit Ethernet speed. 802.11g has a maximum transfer speed of 54 Mbps while 802.11n is about 130 Mbps. This is much slower than a FW400 port. Your router and switch must both be Gigabit capable and your drive must be connected to Ethernet to even hope to achieve Gigabit speeds - no wireless.

Info Cube not getting full records

Hi All,
I am extracting data from the flat file (60k records..of which most fields have binary values),, am getting the values into data source..but when loading from data source to info cube am not getting total records..
the load is successful and it is showing as transferred 60k records and added 510 records in the manage tab of the info cube.
what would be the problem ....any help is appreciated.

Hi,
Data with same combination for characterstic is added and only for unique charactersitc value it will give new record.
Material---Customer-Price
10002----- C1--
20
10002----- C1--
20
10002----- C1--
20
10002----- C2--
20
SO As you can see in flat file 4 records are there but in inofcube it will be only 2
Data with same combination of charactersitc is added and with unique combo only it will display.
Hope it clears you.
Also in addition please check the data in flat file.
Regards,
AL

Not getting full output through prtdiag -v command

Dear all
I am not getting the "Environmental Status", "FRU Status" & "FW Version:" through prtdiag -v command. Here is the output of the command :
# prtdiag -v
System Configuration: Sun Microsystems sun4v SPARC Enterprise T5220
Memory size: 32640 Megabytes
================================ Virtual CPUs ================================
CPU ID Frequency Implementation Status
0 1167 MHz SUNW,UltraSPARC-T2 on-line
1 1167 MHz SUNW,UltraSPARC-T2 on-line
2 1167 MHz SUNW,UltraSPARC-T2 on-line
3 1167 MHz SUNW,UltraSPARC-T2 on-line
61 1167 MHz SUNW,UltraSPARC-T2 on-line
62 1167 MHz SUNW,UltraSPARC-T2 on-line
63 1167 MHz SUNW,UltraSPARC-T2 on-line
======================= Physical Memory Configuration ========================
Segment Table:
Base Segment Interleave Bank Contains
Address Size Factor Size Modules
0x0 32 GB 8 4 GB MB/CMP0/BR0/CH0/D0
MB/CMP0/BR0/CH1/D0
4 GB MB/CMP0/BR0/CH0/D1
MB/CMP0/BR0/CH1/D1
4 GB MB/CMP0/BR1/CH0/D0
MB/CMP0/BR1/CH1/D0
4 GB MB/CMP0/BR1/CH0/D1
MB/CMP0/BR1/CH1/D1
4 GB MB/CMP0/BR2/CH0/D0
MB/CMP0/BR2/CH1/D0
4 GB MB/CMP0/BR2/CH0/D1
MB/CMP0/BR2/CH1/D1
4 GB MB/CMP0/BR3/CH0/D0
MB/CMP0/BR3/CH1/D0
4 GB MB/CMP0/BR3/CH0/D1
MB/CMP0/BR3/CH1/D1
========================= IO Configuration =========================
IO
Location Type Slot Path Name Model
MB/PCIE PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0 pci-pciexclass,060400
MB/NET0 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 network-pciex8086,105e
MB/NET1 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 network-pciex8086,105e
MB/NET2 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 network-pciex8086,105e
MB/NET3 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 network-pciex8086,105e
MB/PCIE PCIE MB /pci@0/pci@0/pci@2/scsi@0 scsi-pciex1000,58 LSI,1068E
MB/PCIE1 PCIE 1 /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,emlxs@0 SUNW,emlxs-pci10df,fc20LPe11000-S
MB/PCIE0 PCIE 0 /pci@0/pci@0/pci@8/pci@0/pci@9/SUNW,emlxs@0 SUNW,emlxs-pci10df,fc20LPe11000-S
========================= HW Revisions =======================================
System PROM revisions:
OBP 4.27.1 2007/09/14 15:17
IO ASIC revisions:
Location Path Device Revision
MB/PCI-SWITCH0 /pci@0/pci@0 pciex10b5,8533.aa 170
MB/PCI-SWITCH2 /pci@0/pci@0/pci@1/pci@0 pciex10b5,8517.ad 173
MB/PCI-SWITCH1 /pci@0/pci@0/pci@8/pci@0 pciex10b5,8533.aa 170
MB/GBE0 /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 pciex8086,105e.108e.105e.6 6
MB/GBE0 /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 pciex8086,105e.108e.105e.6 6
MB/GBE1 /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 pciex8086,105e.108e.105e.6 6
MB/GBE1 /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 pciex8086,105e.108e.105e.6 6
MB/SAS-SATA-HBA /pci@0/pci@0/pci@2/scsi@0 pciex1000,58.1000.1000.2 2
Kindly help me in getting that information from prtdiag command as I have check that picld deamon is running on the system also & service is in online status . This system is running solaris 10 OS.
Regards

Hi
I would like to know if I restart the picl service in solaris 10 on production server, will it have any effect on the production server. As I think that may be, I will get the proper output after restarting the daemon.
Regards

Not getting full duplex throughput on WRT54GL

So here's the situation. I am on a university network that gives us a 10Mbps HALF duplex connection when using auto-negotiate, so we effectively get a 1Mbps connection. I can manually change the duplex setting on my network card to "full duplex" and then I get a solid 10Mbps connection.
Now I am attempting to use a WRT54GL with this connection. I have configured the router for "full duplex," but whether I am connected through wired or wireless to the router, I consistently get only 1Mbps throughput. Is there any additional setting or hack I can do to force the router to use full duplex with its WAN connection to the campus network?
Thanks in advance!

This option is not available on the linksys firmeware..

Do not get full page when click on bookmarked entry

when click on bookmarked item - only get part of a page not full page? Why? how do I get the full page from clicking on a bookmark?
using firefox 4 on win 7 - 64bit
last (old) firefox worked fine!!!

How are you saving a new bookmark?
There 5 ways to save a new Bookmark in Firefox, the first 4 should offer to save the new bookmark in a folder:
1.
2. Right-click and select Bookmark this Page.
3. Bookmarks > Bookmark this Page
4. Double-click the Star that is on the right side of the Location bar.
4a. (A single-click on the Star will save the new Bookmark to the Unsorted Bookmarks folder, without opening the Edit this Bookmark dialog.)
5. Drag the website image in the URL bar into the Sidebar view of Bookmarks
or to the Bookmarks menu bar item and then into the drop-down or onto the Bookmarks Toolbar

Imovie to Idvd, not getting full 'movie'

I don't know if this is an Imovie 8.0.5 (09) issue or an Idvd 7.0 issue, but it is really about to kick my #$#.... here is the problem:
i've created a slide show "movie" in Imovie using slide shows from Iphoto 8.1.1 (09), no chapters, just the one full hour of slides with music.( i don 't know how to make chapters anyway. this is a first time project for me) ... SOMEWAY. i did it RIGHT the first time!! ... however, there were a few mistakes in the finished project, so i had to re-edit and do it again... here is where the problem starts: I did it again... exported and imported into IMovie, added the music tracks and 'shared' to Idvd, then to Media browser. Opened in IDVD ( there has to be an easier way, but this is the way i was told to do it) when it opened in idvd... only 15 minutes of the 'movie' was there. it's not as if it only transferred one clip... because where it stops isn't even at the end of a clip.... i have done it 5-6 times now and still the same outcome. WHAT am i missing??? the finished project should be 3.89 GB but the one i keep getting is 536.2 MB. i have 79.6 GB free on my hard drive......anyone???

i had done a trial export to imusic to see what would happen...the same way i did to idvd, and the entire clip went there.
i'll give it a shot.. at this point, i'd stand on my head while whistling dixie if that would work!!
i thought it was maybe my placement of the file when i place it in my 'theme'. i tried that, but it didn't do anything... that would have been the easy fix!
so, now another couple of hours for export and we'll see if that did it....
thanks... hopefully!!

Do I not get full versions of the CC software when I buy a CC membership?

So I bought my CC membership back in January I think. And the first thing I did was install Premiere Pro CC. I needed it. Now about a month later, I need it again, and it says that I'm on a trial version. I signed into my CC, and tried again, but it still tells me I'm on a trial. The same thing happens with Speedgrade. Apparently after paying for 2 months of subcription, I can only use a 30 day trial version of the software I need. Is this a normal thing? Or should I call adobe, and get this fixed? I'd really really like to have working software on my computer, and I'm spending the money to have it. I'm in college, and on a pretty tight budget, so if I don't get actual versions of the software, I'm going to cancel my subscription. Nowhere on the literature on the CC does it say that you only get access to 30 day trials of most of the software. Please give me a hand here. I need to know if I should end my subscription or not.

Hi Spenserspratin,
Welcome to Adobe Forum.
I do understand your concern. Please refer to this article,
1.http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
2.http://forums.creativecow.net/thread/378/4723
If the issue still persists, please contact Adobe at http://www.adobe.com/in/company/contact.html
Regards,
Rajshree

Not getting full features on logic pro x

I have just bought logic pro x and not all the features are available eg. time sig changing, command mouse function, top bar functions etc (as shown in picture) it almost looks like a LE version or something and i have paid for the full version. Anyone know why?

Turn on All the Advanced Tools in Logic's preferences/Advanced Tools tab
Right/Control clicking on the transport bar will then, for example give you full access to all the various options for use/display there..
Additional: If reading the User Guide for LPX
http://help.apple.com/logicpro/mac/10.1/
is not assisting you with such questions...
I suggest you might want to purchase Edgar's excellent visual guide to LPX available here....
http://www.dingdingmusic.com/DingDing/Manuals.html
..to help you learn more about LPX and how it all works...

Why am I not getting full clip imported into Mocha from AE CC?

First time attempting to try out Mocha. Using Adobe CC
I've been following tutorials on bringing a clip from AE CC into MOCHA:
Select the clip and go to 'Animation':
Then 'Track with Mocha'.
Mocha then opens and has an import menu.
PROBLEM: In the import menu, it appears that all the tutorials are showing that a person can select the keyframes they wish to import (ex. 0 through 465 is automatically there in the tutorials). My import menu shows 0 through 0 and WILL NOT let me change them..It's like it's locked out. If I choose to bring in the clip anyway, it appears to only have brought in one keyframe and is not possible to scan through the timeline...because there is nothing to scan through.
Perhaps I haven't registered it or something. Same problem on a co-workers CC account-they also just trying it for the first time. Thanks for the help.

Thanks gents for your responses! After getting a response from Mocha as well, it appears that I needed to have it as an 'image sequence' like you said Rick. Mocha claims that if your Quicktime player will read the media/clip that Mocha will as well (as long as you have the correct/updated codecs) That's not been the case for me...and I'm pretty sure I'm up to date. A quick google search of 'importing image sequences to After Effects' and then sending to Mocha again. And I'm good. I exported as TIFF. Mocha reads the timeline fine, with a little bit of blur...but I'm trying the CC version out before I upgrade to Mocha Pro. Thanks again and hope this helps someone else in the future.

Not getting full battery charge

I've had my nano since December, recharge it by plugging it into my computer's USB port. I haven't changed anything, unplugged anything, etc. The battery has never lasted as long as advertised (more like 9 hours) but this week it's not even getting fully charged overnight. The battery icon shows the plug as if it's charging, and never gets to the lightning bolt. I've unplugged it and used it, sure enough it's not fully charged and now the battery lasts about 4 hours.
I updated my iPod software and iTunes software in January (less than a month after receiving the unit!). Do I need another update? It shouldn't be worn out, I've only charged the unit maybe 20 times. Anyone else having this problem?
Windows XP

That's kind of messed up, I've had my nano since october or november, don't remember which month I purchased it, I'm pretty sure it was october. Here is what I do to conserve battery life on my nano:
1. Use the backlight when you are in dark rooms and stuff, if in a well lighted room then there is no need for the backlight, this means turn the back light off completely.
2. Don't have the volume turned up as this requires alot of battery, if you have a problem with surrounding noise than get yourself a pair of $14.00 Koss noise reduction increased bass earbuds at your local Target, by the way these are great because they they use a memory foam type solution to ensure a great fit every time and they are also priced well and they reduce noise well.
3. Convert all your music to AAC format, this also helps
4. Make sure your nano's software is update, this tremendously helps, because apple does release software updates that will improve your batteries performance.
5. When you go to sleep let your nano charge overnight, this might be your problem.
If all else fails send it in to Apple.
Message was edited by: megabyte5689

Adding 30-inch Cinema display to a new iMac. Not getting full resolution.

I have just bought a new 27-inch quad core imac i5 and have added my old 30-inch cinema display (five years old) as a second monitor but the resolution is poor - 1280 x 800 compared to 2560 x 1440. How do I improve the resolution as it's almost not worth having?

You need to use a dual-link DVI adaptor to get a higher resolution from that display.
(53141)

Not getting Full LTE reception

Similar Messages

Maybe you are looking for