Not happy to find out that "Siri" funtion is not set up to search for buisnessess in Aus
Just discovered that "Siri" function is not set up to search for a business in Australia i.e Siri! can you find me a Italian restaurant nearby??? "sorry can only search for this in U.S and in U.S English. Went to my local Apple store thinking this would be a simple fix only to be dissapointed with being told this function is not set up for use in Aus.
5 minutes on Apple's Australian site would have told you that.
Similar Messages
-
I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store
Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic. -
How do I use my iCloud???
I purchased 4 movies and 2 audio books from iTunes only to find out my iPad2 didn't have enough storage, so I purchased more storage from iCloud.
My iTunes account only shows the 4 movies that need to still be downloaded (not the two books) After purchasing 20GB from iCloud I am still receiving the "There is not enough available storage. You can manage your storage in Settings" message. I have gone to my Settings, where it shows I have the new, extra storage. I have set all the iCloud settings as shown on the Apple website. In my iCloud settings, it shows I have 17GB available out of 25GB. In my General settings, it shows that I have a capacity of 28.6 GB, while my Available is 2.9GB. (????)
I don't know why I still can't download the movies. I wouldn't know where to go (how to get to) the iCloud if I could...
Also, iTunes has sent me receipts for the movies and audio books I purchased as well. Where are they???
Thank you SO very much for any assistance you can offer me!Cancel your storage upgrade
If you upgrade or renew your storage but no longer need it, you can cancel. If you cancel your storage plan within 15 days of an upgrade or within 45 days after a yearly payment, you can contact Apple for a full refund. After this period, you can downgrade your storage for the following year.
Note: Partial refunds are available where required by law.
From here > http://help.apple.com/icloud/?lang=en#mma3518f8580
HelpKimIsAlreadyTaken wrote:
Since I purchased about $70 worth of movies and books and they won't load onto my iPad, do you think iTunes will refund my money?
If you make more room on your Device perhaps you can View/ use the purchases...
However if you would prefer a Refund... you can always ask... be sure to explain your situation...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note:
It is stated that all sales are final -
I moved my contacts and groups as well as calendars to icloud. Nor I can't use them in outlook 2010--which I now know is not supported--how do I reverse what I have done?
Outlook 2010 is supported, as is 2007.
-
I just bought a canon pixma iX6540 printer only to find out that the driver is not supported. I am using Mac OS X v10.7. Can someone help please. Thanks
Although it mentions OS 10.6 on the link, have you tried downloading the latest drivers - if you haven't already - from the Apple Support site, maybe they'll work:
http://support.apple.com/kb/DL899 -
Hello im trying to "erase all content and settings" on my iphone 4, but it keeps asking for a 4 digit passcode and i have no idea what that passcode is. It's none of my previous passwords I've had on the phone since i've used it. How do i find out that Passcode?
Are you sure it's asking for a four digit code?
iOS 7 has a new feature called Activation Lock. It requires your Apple ID and password before doing something like an iPhone reset. This is a new anti-theft feature. -
Just because I have an imac pre 2007 why can I not order photo albums???!!
I spent hours building a photo album for my parents only to find out that because my mac is earlier than 2007, even though I have 10.6.8, I can no longer order?! What is with that? This makes no sense. I can go online to various "photo shop" place and regardless of the OS and computer I am working from I can order a photo album so why can I no longer do this through iPhoto on my MAC?
How do I order my album now? If somebody could please explain as I am going home in 1 month and really wanted to surprise my aging parents with this book.I found this:
http://store.apple.com/us/help/print_products
Have you tried this? -
What do I do now that I have down loaded LR 4 only to find out that it's not compatable with win. XP
What do I do now that I have down loaded LR4 only to find out that it's not compatable with windows XP?
Upgrade your operating system? Call sales support to return the package/ undo the purchase within the 14 day timeframe? Whichever you prefer...
Mylenium -
Installed firefox 4 for os 10.4.11 and replaced 3.6 to find out that it's not compatible. Need to reinstall 3.6, but cannot find it. Please provide where I can re-instal Firefox 3.6.
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
How can we find out that the Z table is adjusted or not???
Dear Friends,
How can we find out that the Z table is adjusted or not???
I have activated it but I need to se that the table is adjusted or not? I know we can do it from SE14 but I don't have an authorization ,
Thnaks,
SridharHi, Thanks for the reply,
As per ur suggestion of path direction I have checked the table in production and development both.
In my Z table, I have 2 key fields and for those 2 key fields the primary indexs are created automaticaly and displayed in Developement but in Production there is no indexs are created for those 2 fields.
Could you please guide me what could be the reason?
Thanks in advance.
Regards
Sridhar -
That did not help me find out needy iPhone will break Icloud account for Iphone his serial number (DN******TTN) for I am I can not activate buy user please help
<Personal Information Edited by Host>Your question isn't at all clear. Is this a second-hand phone which has been locked by the previous user? In that case only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all.
You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.
You should not post serial numbers or any other personal data here; I've asked the Hosts to remove it. -
I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?
Do you have a TM backup or a clone? If so, erase the drive and restore with TM or clone back.
If not you'll have to reformat and re-install the OS that shipped with your Mac. If it shipped with Lion or ML you can do the restore from your Recovery Volume
EDIT: I assume you are saying that you just installed 10.8? -
I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Using migration assistant I transferred my complete MacBookPro to my nex iMac. Now I find out that all jampacks are missing in GarageBand. Can anyone advise? Thanks!
I would think the migration assistant transfers 100% of all contents...
When you are setting up a new Mac you can use Setup assistant the moment you boot the mac the first time. Setup Assistant will usually transfer everything. If you miss tha t moment and later launch Migration Assistant some library files will not be transferred. Migration assistant will not transfer system files, only User Files and Application files. I think, that is why your files are missing.
so could you please tell how this copying is done?
Best take an external drive with plenty of free disk space and plug it into your MacBook Pro.
Open the System drive, your Macintosh HD in the Finder and open the folder "Library", then "Application Support", then "GarageBand". Copy the folder
/Library/Application Support/GarageBand/Instrument Library/ to your external drive by dragging it there.
Then open again the folder "Library" on your Macintosh HD, and this time open the folder "Audio" inside. Copy the folder
/Library/Audio/Apple Loops/
to your externall drive. Eject the drive and plug it into your iMac.
Now compare the AppleLoops folders and instrument library folders and copy all missing items over to the corresponding folders in the iMac's Library.
Afterwards you need to reindex the loops, by dragging any loop you newly installed onto the Loop Browser in garageband, see: Rebuilding the Loop Index in GarageBand -
Need a program which finds out if a user has not logged for 3 days?
HI,
I NEED A PROGRAM WHICH FINDS OUT IF ANY USER HAS NOT LOGGED FOR THREE DAYS
AND SEND A MAIL TO THE BASIS TEAM.IT SHOULD BE SHEDULED AS A BACKGROUND PROCESS.
I SEARCHED IN GOOGLE BUT NOT ABLE TO FIND IT.
PLEASE HELP ME OUT WITH THIS.
REGARDS,
MANIuse table USR02 and analyse field field TRDAT
X = sy-datum - usr02-trdat.
-> if x ge 3...
for mail use e.g. fm SO_NEW_DOCUMENT_ATT_SEND_API1
hope that helps
Andreas from germany
Maybe you are looking for
-
How do I stop a different iphones information loading onto my iphone when a sync takes place?
Everytime I update my phone or my husbands phone our phone information is wrongly loaded onto each others phone. For example, I've just updated my phone to the latest software, my husbands Apple ID is now showing as my id on my phone - how do we sto
-
I have made a folder before but can't remember what I did.....help
I have made a folder before but can't remember what I did.......help
-
Charge Account Is Not Copied From PR to PO When Created From PR to RFQ to Quotation to PO
Hi, We are using Autocreate functionality (Forms) for creating PO. Now when we create PO directly from PR, distribution account gets copied correctly from PR, but when when we create PR>>RFQ>>Quotation>>PO , it takes from Inventory org material accou
-
Using Postcard Template, how do I print with NO white border?
I am trying to use the 4 postcard template and cannot get the photo printed without a white border around the edge of the paper. I want to the photo to take up the entire card. What am I doing wrong? Obviously I am new to this so I would appreciate v
-
When in LR 5 I click Edit in PSE 11 nothing happens. Why?
When in LR5 Iclick Edit in PSE 11 nothing happens. Why?