Not intelligible problems with the counter

I use
Board: PCI-6601
Soft: VB 5.0 and ComponentWorks 3.0
For my task I use " Buffered Event Counting" mode. If the signal comes the first on "Source" and then on "Gate" all works wonderfully. But if the signal comes on "Gate" the first I receive mistake
Error:-10920
Context: Reading data
Description: "One or more data points might have been lost during buffered GPCTR operations due to speed limitations of your system".
It is very strange. I would like to see zero. Somebody can face with this problem? Or the counter cannot work in such mode?
Thanks.

Pete;
I agree that is a little strange.We don't have such problem reported on our Data Bases.
A workaround you can try is to make a sinle pulse goes to the source, before start the buffered acquisition, and see if that makes the counter keeps reporting a 1 value.
You can also try the same thing on another counter of the board to see if that problem is related to the counter you are using.
Regards
Filipe A.
Applications Engineer
National Instruments

Similar Messages

I would like to know is there anybody out there in the community who is not having a problem with the updates.

I would like to know is there anybody in the community that is not have a problem with the updates.

That is incorrect. Either you misread or the newspaper you read was wrong. iOS 6.1.2 fixes a bug that caused excessive activity and log entries with Exchange servers.
http://support.apple.com/kb/DL1639
The security breach was due to Java-based malware:
http://www.ft.com/cms/s/0/1fdebce6-7ac8-11e2-915b-00144feabdc0.html

PXI 6220 - problems with the counter

Hello all,
I try to make a buffered counting with counter0 of my PXI card 6220, to count the speed of a motor through a photocell and a sticker over the pulley of the motor.
I have wired my photocell at PFI8 (source) and I generate a pulse train that I have wired in PFI9.
The input to the counter is a pulse train 5V high level - 0V low level.
The problem is that the counter counts sometimes more than 1 pulse for every turn of the motor. However, apparently the pulse train looks ok.
I don´t know what´s the problem.
The rising slope of the pulses looks very nice so, I think I could discard it.
I can suppose that in between pulses there are some glitches at a very high frequency that I cannot see (I have sampled this signal only at 800kHz and at this frequency there are no glitches), but maybe the counter yes, because it works at 20MHz.
Somebody has experienced this problem. Sometimes ago, using a PCI6221, I solved a similar problem by activating the digital filtering, but it seems it is not possible to activate for this cards. Could somebody confirm it?
Any ideas will be appreciated.
Thank you very much in advance!!

Pete;
I agree that is a little strange.We don't have such problem reported on our Data Bases.
A workaround you can try is to make a sinle pulse goes to the source, before start the buffered acquisition, and see if that makes the counter keeps reporting a 1 value.
You can also try the same thing on another counter of the board to see if that problem is related to the counter you are using.
Regards
Filipe A.
Applications Engineer
National Instruments

Some problems with the count function

Hi Guys,
I am trying to return following:
2009 GUESTS NIGHTS between 1 and 5 = 80 guests
2009 GIESTS NIGHTS between 5 and 10 = 100 guest
Whe I use the combine with a similar report option (union), I issue the following query:
SELECT saw_0 saw_0, saw_1 saw_1, saw_2 saw_2, saw_3 saw_3 FROM ((SELECT Resort.Resort saw_0, Time."Year" saw_1, "Non Revenue Facts".Nights saw_2, count(Guests."Guest Name") saw_3 FROM GUEST WHERE "Non Revenue Facts".Nights BETWEEN 1 AND 5 GROUP BY saw_1, saw_2, saw_0) UNION (SELECT Resort.Resort saw_0, Time."Year" saw_1, "Non Revenue Facts".Nights saw_2, count(Guests."Guest Name") saw_3 FROM GUEST WHERE "Non Revenue Facts".Nights BETWEEN 1 AND 5)) t1 GROUP BY saw_1, saw_2, saw_0 , saw_3 ORDER BY saw_0
The query return just the results for nights between 1 and 5.
I need two columns showing the count of the guests with nights till 5 and one other column showing the count of the guests with nights from 5 to 10.
Any help would be really appreciated.
Regards
Giuliano

Sorry I did not get this.
I should still use the union statement and than build the below function in the nights fields?
What I am trying to achieve is simply how many guests do i have with at least 1 night and max 5 nights
and how many guests i have with at least 5 nights and a max of 10 nights.
I should have 2 columns:
1 label Nights between 1 and 5
2 label Nights beween 5 and 10
the count(guests) column should than show how many guests in the first range and how many in the second.
Regards
G.

Is there ANYONE who has not had a problem with the 10.4.10 upgrade?

Just bought Ilife and it requires 10.4.9. I'm using 10.4.8. I can't seem to find any post with positive results. Is 10.4.10 that bad. Sorry is this is a double post. I did this about an hour ago and it never showed up.
Thanks
Bob

I downloaded the upgrade via Software Update and I've had no problems, other than the sound issue. There was a work around that worked fine, then Apple fixed the problem and that download also worked fine for me.
I've become a believer in repairing permissions before, after and often software updates.
Running the cron scrips from Onxy often, and emptying my user/library/cache daily seems to be worthwhile too.
For what it's worth, my little 17" intel Imac keeps chuggin' along.
Jon

Problems with the count tool, I am getting an error message when I try to use it

I get the message that there are too many count points on the screen to allow manual editing of the count

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

FireFox is not playing sound on any video files. Youtube, Hulu, etc. I am not having this problem with the other web browsers on my computer.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/908837]]</blockquote>
I think it is related to a babylon add on that my son installed. I don't know how to get rid of it.

Hi,
To check if Babylon is the cause: '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''', click '''Extensions''' on the left , '''Disable''' and restart. Likewise for other suspected add-ons. You can disable / enable more than one or all.
You may also want to check [https://support.mozilla.org/en-US/kb/No%20sound%20in%20Firefox?s=windows+7+sound&r=0&as=s this.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

Premiere Pro CS4 - Problem with the monitor program.

Hi. I'm not able solving problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline and play it in the monitor program, vision in the monitor program doesn't run:black monitor or a little part of the photo appear... sometimes distort colours. Asus P5QPRO, Intel 9550 and Sparkle Nvidia GeForce 9800 GTX+ 1024 DDR3; last gpu driver and directX are installed. Different configuration of stratch disks were tested. Where am I wrong?

Dear Bill,
thanks for your answer and your article. I tried with your NTSC 4:3 720x480 PAR 0.9 and, "magically", no more problem!!! I used the script pocedure in Photoshop CS4 to resize my images. Now, before starting my workflow and hoping not to overuse your patience, I would like to indicate you my equipment and my target: I use a Canon Eos 7D (generally for still images, 90% are vertical, and just some videos) and I use Premiere Pro CS4 to burn a dvd (normal, 4.7 Gb or double side, more than 8 Gb) with a 16.9 lcd tv (I'm Italian); my camera save as .jpg and .raw (but why use heavy .raw files if I've to redute to 720x480?!??).
So, according to your "everyone wants the highest quality that they can obtain when doing theri videos..." and "your video project may vary, so you will need to plug in the dimensions for YOUR video project in that case", I've a question: which is the best for me?
And then:
1 - Premiere Pro CS4 havn't a batch or a script procedure for still image like PS (only for videos)!?!
2 - Premiere does'nt allow you to import images like 4.181 Kb (a too large dimension file error appears)!
3 - In the timeline of Premiere, after you dragged images, you can select them and right click to perform "resize to frame size": it seems to run good without problem, but what appen to the photo? Which is it's pixel?
4 - In the general preferences of Premiere you can to optimize rendering for "memory" or not: which is the best for you?
5 - I attached file with a screen of something strange in Premiere: dragging an image (the first of the project) in the timeline, the timeline appears distort (you can see the part in the yellow square): then, when I render the project and play in the monitor program, it becames normal.
Thanks!

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

I can not log on to my itunes account on my second generation ipod but I have no problem with the log on with my ipad. The password doesn't work on the ipod touch. Thoughts???

Trouble connecting to itunes store with my password on my ipod touch (2nd generation) but using the same apple id and password on my ipad2 I don't have a problem connecting to the store.
Need troubleshooting

I have the same thing, same issues. Just came from Colorado using my iPad extensively with no problems.
Get back home, there is an update on my home computer for Airport Extreme to 7.5.2 which I updated. Also updates for iPad for 4.3.4 and now last night 4.3.5.
Still does not work. I have not taken the iPad to another network locally, but my understanding is that it is not a problem with the iPad but with Airport Extreme's update. I have done all the resets, restarts, and turning on and off Wifi on the iPad and that does not work.
I would have to assume Apple is working on it. Very frustrating since I am on my Mac Pro, iPhone 4, and other things and no problem.

Not intelligib​le problems with the counter

Similar Messages

Maybe you are looking for

Not intelligible problems with the counter