Not possible to run STS as HTTPS has not been configured

Hello
I activated all necessary services but STS still doesnt work. The following error pops up
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
BSP exception: Access to page start_sts2.htm requires HTTPS. HTTPS has not been configured on this server
Error type:
Your SAP Business Server Pages Team
Can somebody tell what should be done?
Thanks

Its necessary to do the following
SE80 -> BSP Application -> Tunguska -> Pages with Flow Logic -> start_sts.htm or start_sts2.htm-> Right click & display in same window -> Properties tab -> Transfer Options -> HTTPS should be UNCHECKED.

Similar Messages

I have got an IPhone 5. It has been locking itself and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any suggestion ?

I have got an IPhone 5. It has been locking itself and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any recomandation ?

Sorry, but the warranty for the phone is only valid in the country where you bought the device, and you can't send it in, Apple does not ship internationally.
Has the phone been officially unlocked? Only the carrier can unlock an iPhone.
iPhone: About unlocking

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

Possible to run *own* Stratus server or *not* use Stratus for RTFMP?

Possible to run *own* Stratus server or *not* use it for RTFMP?
In other words, have Flash peers be able to talk RTFMP without needing to ever talk to Stratus server.
It may not always be possible to stay connected to Adobe's Stratus servers so this would be useful.
Possible? How?
cs

Flash Player 10.1 beta supports nc.connect("rtmfp:"). a NetConnection connected in this manner can only be used for groups communication (NetStream for multicast and NetGroup) between peers on the local LAN, or for a NetStream that is to receive a pure IP multicast (no P2P or C-S at all). this is covered in the beta ActionScript reference page for NetConnection.connect().
note that this mode can't be used for 1-1 NetStreams, only group NetStreams and NetGroups.
in order for peers in the group to find each other on the local LAN, you must enable LAN peer discovery and add an IP multicast address to the groupspec. when using GroupSpecifier to make the groupspec for joining groups (recommended), that's the "ipMulticastMemberUpdatesEnabled" property and the "addIPMulticastAddress()" method, respectively. for example:
var nc:NetConnection = new NetConnection;
nc.connect("rtmfp:");
var gs:GroupSpecifier = new GroupSpecifier("com.example.chatapp/mychannel");
gs.multicastEnabled = true;
gs.postingEnabled = true;
gs.ipMulticastMemberUpdatesEnabled = true;
gs.addIPMulticastAddress("239.254.254.1:30000");
var ng:NetGroup = new NetGroup(nc, gs.groupspecWithAuthorizations());
var ns:NetStream = new NetStream(nc, gs.groupspecWithAuthorizations());
// ... add event handlers, wait for NetGroup.Connect.Success & NetStream.Connect.Success, then post and publish/play streams
in this example, i specified a group called "com.example.chatapp/mychannel", where P2P multicast and posting are enabled, where peers can discover each other on the local LAN and they use IPv4 multicast address 239.254.254.1 UDP port 30000 to do so.
things get really interesting when you connect to Stratus and enable the group server channel (to get auto bootstrapping) and *also* use LAN peer discovery so that peers on the LAN will be more tightly meshed than they necessarily would through normal group topology evolution.
-mike

Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file [help]

Hi,
I have a excel file that I have been using since beginning of year.
Yesterday, I tried to open it but a message comes out "
Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
After I click yes, the page is blank. The file is about 400kb in size.
I have try open and repair and third party repair program and not working also.
I would appreciate a lot if you can help me.
Thank you very much.

Per your post, this problem might be caused by malware on the affected machine.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx) to kill the malware, and then repair Excel file itself.
If this is not the case, feel free to post back and let me know. Thanks.
Tony Chen
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error : The label 'http' has already been declared. Label names must be unique within a query batch or stored procedure.

Hi all,
I have created one SP for sending mail with formatting the HTML code inside script whenever i am individually declaring it and printing its expected but the problem at time of executing SP its giving error like this
Msg 132, Level 15, State 1, Line 47
The label 'http' has already been declared. Label names must be unique within a query batch or stored procedure.
what is the possibilities to overcome this problem follwing is my stored procedure code
ALTER PROCEDURE [dbo].[USP_DataLoadMailsend_essRules]
AS
BEGIN
SET NOCOUNT ON;
SET XACT_ABORT ON;
BEGIN TRY
---BEGIN TRANSACTION T1
DECLARE @packagelogid INT
DECLARE @batchlogid INT
DECLARE @packagestatus CHAR(2)
select @batchlogid =19870
--print(@batchlogid)
DECLARE @script VARCHAR(MAX)
DECLARE @tableHTML VARCHAR(MAX)
DECLARE @mailheader VARCHAR(50)
DECLARE @count INT
DECLARE @recipients1 VARCHAR(50)
DECLARE @subject1 VARCHAR(200)
DECLARE @sql VARCHAR(MAX)
Declare @UserId varchar(Max)
Declare @Information varchar(max)
Declare @TableHTML1 varchar(max)
Declare @TableHTML2 varchar(max)
SET @mailheader = ''
SET @mailheader = (select case
WHEN FileUpload = 'F'
THEN 'BussinessRules is Aborted'
WHEN (InRule = 'S')
AND (
SELECT sum(isnull(ErrorRecords, 0)) tot
FROM abc.FileUploadSummary z
WHERE z.BatchId = bts.BatchId
GROUP BY BatchId
) > 0
THEN 'BussinessRules is Processed with Errors'
WHEN InRule = 'F'
THEN 'BussinessRules is Failed'
WHEN (InRule = 'S')
AND (
SELECT sum(isnull(ErrorRecords, 0)) tot
FROM abc.FileUploadSummary z
WHERE z.BatchId = bts.BatchId
GROUP BY BatchId
) = 0
THEN 'BussinessRules is Succeeded'
end
from abc..BatchStatus bts where BatchId=@batchlogid)
/* Selecting Person Mail as Recipient */
SELECT TOP 1 @recipients1 = EmailId FROM abc.PersonEmail
WHERE PersonId = ( SELECT TOP 1 personid FROM abc.FileUploadSummary WHERE BatchId = @batchlogid )AND EmailTypeId = 1
/* Selecting UserId*/
select top 1 @UserId=loginid from abc.FUS where BatchId=@batchlogid
/*Selecting Information about the Status */
Set @Information=
(select case
WHEN FileUpload = 'F'
THEN 'BussinessRules is Aborted'
WHEN (InRule = 'S')
AND (
SELECT sum(isnull(ErrorRecords, 0)) tot
FROM abc.FileUploadSummary z
WHERE z.BatchId = bts.BatchId
GROUP BY BatchId
) > 0
THEN 'BussinessRules is Processed with Errors'
WHEN InRule = 'F'
THEN 'BussinessRules is Failed'
WHEN (InRule = 'S')
AND (
SELECT sum(isnull(ErrorRecords, 0)) tot
FROM abc.FileUploadSummary z
WHERE z.BatchId = bts.BatchId
GROUP BY BatchId
) = 0
THEN 'BussinessRules is Succeeded'
end + N' <br> <B>BatchId= '+ convert(varchar(250),(select @batchlogid)) +'</B>'
from abc..BatchStatus bts where BatchId=@batchlogid )
/*Selecting the Error Reason*/
if exists (select 1 from BatchStatus where BatchId=@batchlogid and ( InRule='f'))
begin
set @TableHTML1 = '<table border=1><tr><th>Sr.No.</th><th><P>Error Reason :</th></tr>'+
cast((select td= ROW_NUMBER()over (order by (select 1)),'',
td=isnull(e.ErrorDescription, '')
from abc.x.tbPackageErrorLog e --50594
join abc.x.tbPackageLog p -- 10223
on p.PackageLogID=e.PackageLogID
where p.BatchLogID= @batchlogid FOR XML PATH('tr'), TYPE )
as NVarchar(max)) +'</table>'
-- print @tableHTML
if not exists (select 1 from BatchStatus where BatchId=@batchlogid and ( InRule='f'))
set @TableHTML2 = 'Error Reason :N/A'
end
-- insert into #tmp values ( @TableHTML1)
--select * from #tmp
Set @tableHTML= 'Hello '+@UserId+', <br>Information:'+isnull(@Information,'') +
'<Table Border=1><Tr><th>Sr No</th><th>Uploaded files </th>:'+
CAST ((select td= ROW_NUMBER()over(order by f.FileUploadId), '',
td = f.TableName , ''
from abc.FileUploadSummary F where BatchId=@batchlogid
FOR XML PATH('tr'), TYPE ) AS NVARCHAR(max) )
+'</table>'+
'Error Reason :'+isnull(isnull(@TableHTML1,'')+ isnull(@TableHTML2,''),'N/A')+ --concat (isnull(@TableHTML1,''),isnull(@TableHTML2,'')
'<br> Please login to Your Account for further Details..!'
+'<br>@Note: This is system generated message, Do not reply to this mail. <br>Regards,<br>'+
'Admin'
print @tableHTML
SET @sql = ' EXEC msdb.dbo.sp_send_dbmail @profile_name = ''DBA_mail_test''
,@recipients = ''' + isnull(@recipients1,'''') + ''',@subject = ''' + isnull(@mailheader,'''') + ''',
@body = ''' +isnull(@tableHTML,'''')+ ''',
@body_format = ''HTML'''
Exec(@sql)
END TRY
BEGIN CATCH
PRINT error_message()
-- Test whether the transaction is uncommittable.
-- IF (XACT_STATE()) = - 1
-- ROLLBACK TRANSACTION --Comment it if SP contains only select statement
DECLARE @ErrorFromProc VARCHAR(500)
DECLARE @ErrorMessage VARCHAR(1000)
DECLARE @SeverityLevel INT
SELECT @ErrorFromProc = ERROR_PROCEDURE()
,@ErrorMessage = ERROR_MESSAGE()
,@SeverityLevel = ERROR_SEVERITY()
--INSERT INTO dbo.ErrorLogForUSP (
-- ErrorFromProc
-- ,ErrorMessage
-- ,SeverityLevel
-- ,DateTimeStamp
--VALUES (
-- @ErrorFromProc
-- ,@ErrorMessage
-- ,@SeverityLevel
-- ,GETDATE()
END CATCH
END
please help me to solve this problem
Niraj Sevalkar

This is no string http in your procedure. Then again the error message points to a line 47 outside a stored procedure. I can't tell it is outside, since there is no procedure name.
But I see that you have this piece of dynamic SQL:
SET @sql = ' EXEC msdb.dbo.sp_send_dbmail @profile_name = ''DBA_mail_test''
,@recipients = ''' + isnull(@recipients1,'''') + ''',@subject = ''' + isnull(@mailheader,'''') + ''',
@body = ''' +isnull(@tableHTML,'''')+ ''',
@body_format = ''HTML'''
Exec(@sql)
Why is this dynamic SQL at all? Why not just make plain call to sp_send_dbmail?
EXEC msdb.dbo.sp_send_dbmail @profile_name = 'DBA_mail_test'
,@recipients = @recipients1, @subject = @mailheader, @body = @tableHTML
Erland Sommarskog, SQL Server MVP, [email protected]

The ipod could not be synced because the sync session has not started

when i'm connecting the ipod to my computer the message '' the ipod could not be synced because the sync session has not started '' !!!
why ?
and what can I do ???

See:
https://discussions.apple.com/thread/3415227?start=0&tstart=0
https://discussions.apple.com/message/16400530#16400530

When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.

I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567

Can i change apple id to update a game? if its possible how i can change it? if its not possible why in this generation why its not possible?

can i change apple id to update a game? if its possible how i can change it? if its not possible why in this generation why its not possible?

You can't. All apps, and any other content from the store, are tied to the account that downloaded them, and they will remain tied to that account - so only the account that bought/downloaded an app can download updates to an app. Are you having problems downloading an app update via the app's own account ?

CRM 2007 The Java load in database SID/hostname has already been configured.

I had an CRM 2007 system on windows server 2008R2. I had an issue in CI system and reinstall it. But I got a problem when the java already configured in database. My database is very important so I can remove schema. I chose CRM2007>Oracle>ABAP+JAVA>HA system>Central Instance in the sapinst.
CJS-30109 The Java load in database GOL/crmdb has already been configured. SOLUTION: Remove the schema and load it with a new load before you run this installation.
Thanks

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

Not possible to run CodedUI tests on Windows 7 embedded

Hi all,
I am trying to get my CodedUI tests running on the target machine with Windows 7 Embedded.
For that, I installed on the target machine:
Visual Studio 2010 Test Agent
VS2010 SP1
Next I try to run the CodedUI test from the command line using mstest.exe (since no Visual Studio may be installed on target
machine). However, before even executing the first line of code in my test, mstest fails after showing a popup window with following message:
"the ordinal 459 could not be located in the dynamic link library urlmon.dll"
When looking in the detailed logs of QTAgent32.exe I see a 'System.BadImageFormatException' thrown by the PluginManager of CodedUI when trying to
start an Internet Explorer plugin. See detailed stacktrace below this message.
This might be caused by the fact that this Windows Embedded installation does not contain Internet Explorer (for security reasons). The CodedUI test
and application under test however do not need Internet Explorer at all, the application is a WPF application.
So, my questions:
- Does anyone know how to get rid of this error without installing Internet Explorer?
- Any ways to prevent MsTest.exe to start the IE extension for a CodedUI test?
Some things I tried already but did not bring success:
- Run a completely empty CodedUI test; it triggers the same error.
- Remove IE extensions from C:\Program Files (x86)\Common Files\Microsoft Shared\VSTT\10.0
- Remove unneeded things (datacollectors) from MsTestSettings file.
Any help/ideas appreciated!
Jan Lavrijsen
Complete stack trace:
Agent: adapter run thread for test 'CutPowerDuringImport' with id 'b7c688eb-89ac-4654-b638-a5699f579871'
»DebugInfo
»Trace »FirstChanceException
»FirstChanceException 'Microsoft' causing 'System.BadImageFormatException' - Retrieving the COM class factory for component with CLSID {25336920-03F9-11CF-8FD0-00AA00686F13} failed due to the following error: 800700b6 The operating system
cannot run . (Exception from HRESULT: 0x800700B6).
»[CausedBy=Microsoft],[FirstChanceException=System.BadImageFormatException],[Count=1]
»CallStack: at Microsoft.VisualStudio.TestTools.UITest.Extension.IE.IETestPlugin.StartSession(System.Boolean recordingSession) [IL: 0x19][Native: 0x4B]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestPluginManager.StartSession(System.Boolean recordingSession) [IL: 0x2B][Native: 0x95]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestService.StartSession(System.Boolean recordingSession) [IL: 0x34][Native: 0xA9]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.StartSession() [IL: 0x37][Native: 0x6C]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.Initialize() [IL: 0xB5][Native: 0x163]
at Microsoft.VisualStudio.TestTools.UITesting.CodedUITestExtensionExecution.BeforeTestInitialize(System.Object sender,Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs e) [IL: 0x3C][Native: 0x76]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecution.RaiseBeforeTestInitialize(Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs args) [IL: 0x15][Native: 0x17]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.RunInitializeMethod() [IL: 0x3E][Native: 0x96]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.ExecuteTest() [IL: 0x8D][Native: 0x113]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.Execute(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestResult result) [IL: 0x46][Native: 0xD1]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.ExecuteSingleTest(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter executer,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext
testContext,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestAdapterContext userContext,System.Boolean isLoadTest) [IL: 0x27][Native: 0x55]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.Run(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext testContext,System.Boolean isLoadTest,System.Boolean
useMultipleCpus) [IL: 0x109][Native: 0x32B]

Hi Jan,
Thanks for your response:)
I think it is a good feedback for this issue, but as far I know, it is by design now, we need to use the IE extension for test projects. My understanding is that it would find the accordant UI Test Controls with your app UI controls, so it would search all
test controls include the IE controls, and then use one real UITestControl to instantiate an object which is equal to the real UI control, so we could playback the recorded action.
WinButton uICloseButton = this.UISnippingToolWindow.UISnippingToolTitleBar.UICloseButton;
But I think you can submit this feedback to Microsoft Connect feedback portal:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,maybe
Microsoft engineers will share us a more plausible explanation.
Thanks for your understanding.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ITunes for mac is not opening saying this version of iTunes has not been correctly localized for this language. please run the english version.

I tried to open iTunes but this pop up keeps showing.
This version of iTunes has not been correctly localized for this language. please run the english version
What should i do?

Personally i would save all my existing items to another file. Delete the itunes and Download a new copy from Apple support pages and reinstall. Hopefully that won't have messed up your music. But if it does then delete all content fron Itunes and reimport your back up data

Revaluation not possible while running MFN1

Hi all:
I'd like to revaluate the product order cost using MFN1, however got the following message,
could you please give me a solution? thank you very much!
Revaluation at actual prices not possible in version 0, fiscal year 2009
Message no. KI760
Diagnosis
A revaluation for actual prices is not possible since this function is not available in version 0 in fiscal year 2009.
Procedure
Maintain the corresponding indicator in your version.

HI,
Please check in t code OKEQ, version 0, 4th column "ACT" is checked or not.
And go to controlling area setting and check the same in same OKEQ screen.
And check under the "Setting for Each fiscal year" with 2009 and "Vension for INd.act.Alloc." is maintained with ZERO.
Please let us know if you still face the issue.
Vijay

SqlTransaction.Rollback() does not throw InvalidOperationException in case the transaction has already been rolled back.

According to
MSDN SqlTransaction.Rollback() method must throw InvalidOperationException in case the transaction has already been committed or rolled back.
However, in my tests I don't get any exceptions. Here is the code:
CREATE PROCEDURE dbo.USP_TEST_TX_PROC
AS
BEGIN
SELECT 1/0;
ROLLBACK TRANSACTION;
END
GO
using(SqlConnection con = new SqlConnection(@"Data Source=XXX;Initial Catalog=TestDB;Integrated Security=True"))
con.Open();
SqlTransaction tr = con.BeginTransaction();
SqlCommand cmd = new SqlCommand("dbo.USP_TEST_TX_PROC", con, tr) { CommandType = CommandType.StoredProcedure};
try
cmd.ExecuteNonQuery();
tr.Commit();
catch (Exception ex)
try
tr.Rollback();
catch (Exception ex2)
Console.WriteLine(" Message: {0}", ex2.Message);
What am I doing wrong?
Thank you.
Alexey

Hello Alexey,
I created a client side demo which could throw the InvalidOperationException:
using (SqlConnection connection = new SqlConnection(@"Server=(localdb)\Projects;Database=DFDB;Trusted_Connection=True;"))
connection.Open();
SqlCommand command = connection.CreateCommand();
SqlTransaction transaction;
transaction = connection.BeginTransaction("SampleTransaction");
command.Connection = connection;
command.Transaction = transaction;
try
command.CommandText = "ProInsertIntoOrder 1,'1'";
command.ExecuteNonQuery();
transaction.Rollback();
throw new Exception();
catch (Exception ex)
// Attempt to roll back the transaction.
try
transaction.Rollback();
catch (InvalidOperationException ex2)
Console.WriteLine("Rollback Exception Type: {0}", ex2.GetType());
Console.WriteLine(" Message: {0}", ex2.Message);
You could have a try. However, it is not clear why it could detect the ROLLBACK statement on the server side, I suggest that you could post this feedback to:
https://connect.microsoft.com/VisualStudio/feedback/LoadSubmitFeedbackForm
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Installed Ziggo e-mail on i-phone 4. Not possible to send mail because server was not able to read adress. What to do?

Installed Ziggo e-mail on i-phone 4j ust like their website tells you to do. Mails come in but it is not possible to send mails. The i-phone tells me the server doesn't recognise the forwarding e-mail adres.
Ziggo helpdesk tell me this is not their problem but the problem of Apple.
Please help.
Joop

like stated here only you can just focus on verifying that your smtp settings are correct
https://discussions.apple.com/thread/3925779?tstart=0

Not possible to run STS as HTTPS has not been configured

Similar Messages

Maybe you are looking for