Not saving settings after reboot.

Everytime I reboot, the language settings are reset ( I had 3 other languages).
Also some of the apps I recently purchased are not remembering login or licence.
Anyone with the solution please?

Originally Posted by devsfan1830
The old workaround we needed when Win 8.0 came out still works. Set up all your settings. Put PC to SLEEP. Wake up, then reboot. From then on your settings should stick and sound remain working between boots. Kinda silly we need to resort to this on what amounts to a service pack, but lets face it. No one else is making audio cards these days so Creative can pretty much afford to not give a crap. Although at this point I wonder if I should just switch to on board sound and be done with all this mess.
This did not work for me. I tried everything to get it to work. I ended up replacing the card with the new ZX and after the sleep trick this card seems to be working.

Similar Messages

  • SF300-24 is not saving configuration after reboot

    Dear All,
    I have a couple of SF300-24 switches. When I made needed configurations using CLI or GUI and then saved all configurations. The problem is that switches do not save configurations after reboot. Please assist.
    Thank you in advance

    Hi Vsevolod,
    I guess you have performed the function to copy the running configuration to the startup configuration as per the screen capture below.
    The current released version of code does not have a supported CLI only a menu accessable via console, SSH or telnet.  New code coming out this month supports a CLI, so I am surprised by your comments regarding CLI.
    If you have a early beta release of software version 1.1  with CLI, I would suggest you call into the Small Business Support Center  to get the problem looked at.
    I am using the beta code on my ten port SG300   and 48 port SF300 , but had no difficulty saving configurations in old or beta versions of firmware.
    If you are still having trouble after reading this post, please contact the SBSC  at ;
    http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
    regards Dave

  • Touchpad does not retain settings after rebooting on Equium series

    the touchpad on my equiem is too sensitive, I can adjust setting and works fine for that session but when i reboot it returns to default, i have saved the settings etc but still wont stay set

    Hi
    Its strange and not usual.
    Did you try to reinstall the touchpad driver???
    Try to download and to install the newest version of touchpad driver from the Synaptics website and please repost the results.

  • Not saving tabs after reboot

    Firefox 3.6 and 5 does not ask to save tabs, or does not open the tabs I had on reboot of computer

    I think it was the default with 3.6 to ask you at end of session if you wanted to save tabs, possibly you got your settings changed along the line.
    It is not the default to ask you Firefox 5 (and Fx4). What was changed was that you can restore your previous session through the History Menu. The good news is that you can have the old way back to let you know you want the previous session while fresh in your mind. Even better if in the meantime you remember you want the previous session you can get it through History.
    see item #31 (#tabslost) in the following
    You can make Firefox 4.0.1 look like Firefox 3.6.18, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]
    *http://dmcritchie.mvps.org/firefox/firefox-problems.htm#tabslost
    Part of the problem is that the Firefox developers think that most users use the default home page. (do you know anyone who does, I don't) Makes sense for them to follow along with a standard starting point if there may be a problem.
    The about:home (default home page) tells you if you have previous session to restore or about history.

  • MSI GT70 not saving settings

    Hello, I have a new GT70 2oc-008us and when I purchased the laptop I also bought a Samsung 840 120gb ssd and I installed and migrated the OS myself. Everything else works fine like games but I have this weird issue with non of the MSI installed programs saving their setting after a shutdown. For example, the killer network manager is not saving the setting in which it shows the dialog on close or auto updating which is kinda annoying and the sound blaster cinema is not saving settings like when I plug in my headphones it goes to 5.1 surround instead of headphones or when I play around with the equalizer or the surround sound option to optimize movie or gaming experience. This is quite annoying because I play a lot of games and watch a lot of movies and I do not like constantly changing my settings. So if you know of a solution to my problem could you please help me out?
    Thank you

    For the toolbar problem delete the com.apple.Safari plist from Home/Library/preferences. To have a link open in a new tab you must command-click on the link and have the appropriate box checked in Safari>Preferences>Tabs.

  • Iphone 4 front camera not working even after reboot,resets and restore.

    i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
    Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

    If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
    How to back up your data and set up as a new device
    Apple - Support - Service Answer Center

  • Listener service not start automatically after reboot in Win2K server Clust

    Hi all,
    I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
    Started with pid=1108
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    32-bit Windows Error: 49: Unknown error
    The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
    The service can be manually start.
    Any suggestion?
    Frank.

    The command to start automatically the listener is :
    lsnrctl start
    check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
    check the IP address or host name
    Joel Pérez

  • CSS Service not coming up after reboot

    I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
    This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
    2008-03-06 22:16:32.587
    [client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
    2008-03-06 22:16:32.588
    [client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
    2008-03-06 22:16:33.217
    [client(13472)]CRS-1001:The OCR was formatted using version 2.
    2008-03-06 22:17:54.615
    [cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
    u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
    $ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
    -rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
    This is the log file mentioned in above file:
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
    e. All rights reserved.
    2008-03-06 22:16:32.579: [  OCROSD][2546869600]utread:3: problem reading buffer
    5db000 buflen 512 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.580: [  OCRRAW][2546869600]propriogid:1: INVALID FORMAT
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]proprinit:problem reading the boo
    tblock or superbloc 22
    2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
    ful : [22]
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]propriogid:1: INVALID FORMAT
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]proprinit:problem reading the boo
    tblock or superbloc 22
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]propriogid:1: INVALID FORMAT
    2008-03-06 22:16:32.676: [  OCRRAW][2546869600]propriowv: Vote information on di
    sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
    [0/0] to [2/2]
    2008-03-06 22:16:33.217: [  OCRRAW][2546869600]propriniconfig:No 92 configuratio
    n
    2008-03-06 22:16:33.217: [  OCRAPI][2546869600]a_init:6a: Backend init successfu
    l
    This is tail of my ocssd.log
    [    CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
    And this is my css.log
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
    e. All rights reserved.
    2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
    rc 9
    I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
    Please let me know what else to check or SR is the only option?
    Thanks
    Daljit Singh

    Do you mean CRS rather than CSS?
    I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
    Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating.

  • My iPad is not charging even after rebooting and checking the charger on another device.

    My iPad is not charging even after rebooting and checking the charger on another device.

    So your charger works on another device just not on your ipad?
    if so, make an appointment at your local apple store and have them check it out.

  • HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

  • ITunes not saving settings

    Every time I start iTunes after a reboot, the "first-time" wizard pops up, and my settings are not saved. I have tried to unset the Application Data folder from Read-Only, and I have tried deleting both of the .prefs files. This seems to happen every time I install a new program or modify the registry in any way. How can I fix this problem?

    Any help?

  • Nokia 6288 doesn't retain settings after reboot

    Hi, i've a problem with a Nokia 6288 that after each reboot
    does not retain settings regarding "Normal" profile and background. If i turn off the phone, when i turn it back on it reverts to blank backround and "nokia tune" ringtone and all other settings to default.
    I already tried to reset it to factory default but had no luck.
    Also tried reflashing firmware with nokia software updater but the problem still remains.
    There is a way for "hard resetting" it to factory default?
    Regards
    Luca

    A nokia care point can hard reset a series 40 phone, you cannot do it yourself. They will also be able to fix your problem.
    Care points:
    UK
    http://www.nokia.co.uk/A4228006
    Europe:
    http://europe.nokia.com/A4388379
    Elsewhere:
    http://www.nokia.com and select your country.

  • Safari will not open, even after reboot

    I have been having all sorts of problems with my iMac since installing Mavericks (Gmail integration was freezing everything, Maps just didn't work).
    The latest is that Safari just will not open, period. I have rebooted several times and even reinstalled OS X via the Cmd+R on reboot, nothing. It hangs upon opening and needs a Force Quit. When restarting again, it asks if you want to reopen windows and it makes no difference if you say Yes or No.
    Any ideas on what to do?

    Try deleting the com.apple.Safari.plist
    Quit the application.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
    Open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
    Thanks to leonie for some information contained in this.
    You might need to redo the View settings after an update.

  • New console launcher - NOT SAVING SETTINGS (Vista x

    wtf. new console launcher version is not saving my settings.... speaker settings.. volume etc.. everytime i? reboot its back at default.
    I have:
    reinstalled console launcher. did reg clean / driver sweep etc.
    still doesnt work. anyone?

    In audio console you have a tab "restore defaults" uncheck everthing from it, this may help you as helped me long time ago and I am unchecking it since then just to be sure and never have the problem again. You can also hack Auzentech drivers and Install theirs consoles it can resolve this issue but you must do this at your own as nobody can support you with info how to do this nor will I.Message Edited by Art385 on 08-06-2008 04:24 PM

  • Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

    I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI.  In the enhancement, I take the data records and make some changes to some quantities and units of measure.  After making these changes, I let the function module continue on as normal.  The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
    Here's an example:  An EDI order comes in with 6 EAs of a material.  In my enhancement, I change it from 6 EAs to 2 3PK.  I then let it go on its way.  The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs. 
    The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open. 
    Can anyone give me any clues on how to make my changes stick to the IDoc?
    Thanks,
    Curtis

    Ok, I figured out why it's not saving.  Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy.  So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB.  I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT).  The problem is that I can't change them because the IDoc is still open.
    Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
    Thanks,
    Curtis

Maybe you are looking for