Not seeing specific calls

So I have FlashBuilder 4.5, Adobe Flash 11 and Adobe Air 3.0 installed andin Flash in a new porject doing something like:
import flash.(packagename drop downlist appears)
There is no fileSystem
So I thought, well lets do:
var f:File = File.(Drop down list of all methods should appear)
Flash Builder is all like..."Whats File?" Its not seeing other packages apart of Air or Flash. and I cannot figure out why. I installed all the run times and what not.....Any ideas?
From what I see, it only gives me the very basics of the SDK and nothing else. Which is odd...and I checked to make sure I am doing thing right and I am, It should be
var f:File = File.applicationDirectory
But doing that makes Flash Builder spazz out be like "no that doesnt exist sorry...you cant do that" when clearly its legal, accoriding to thedocumentation that I can.

I see (another thread) you finally gor your File working. What was the issue here? Can you share the answer for next generations?

Similar Messages

Why dose not see the call waiting notification when other party in a call with some one ?

why dose not see the call waiting notification when other party in a call with some one ?

Because that is not a feature of the iPhone (or of most phones). If someone does not answer when you call, it means they do not want to or cannot talk to you at that time. They could be on another call or they could be simply busy doing something else. Why does it matter which?

HT4623 I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting.

I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting. Any help???

The following may help: http://support.apple.com/kb/TS4268

Asterisk not seeing incoming calls

I have Skype Connect set up and an asterisk box set up to use it. I can succesfully call out from asterisk, but I do not see any incoming calls on the number assigned to my Skype Connect Profile. If I call the number it rings a few times then gives a busy signal.
Here is my sip.conf:
[general]
context=from-skype ; Default context for incoming calls
allowoverlap=no ; Disable overlap dialing support. (Default is yes)
udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all)
bindport=5060
bindaddr=0.0.0.0
tcpenable=yes ; Enable server for incoming TCP connections (default is no)
tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces)
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
notifyhold = yes ; Notify subscriptions on HOLD state (default: no)
sendrpid=yes
register => 9905XXXXXXXX:[email protected]/9905XXXXXXXX
[skype]
type=peer
context=from-skype
username=9905XXXXXXXX
secret=Redacted
canreinvite=no
insecure=port,invite
dtmfmode=rfc2833
host=sip.skype.com
realm=sip.skype.com
nat=yes
qualify=yes
fromuser=9905XXXXXXXX
fromdomain=sip.skype.com
disallow=all
allow=g729
allow=ulaw
allow=alaw
trustrpid=no
sendrpid=yes
[1001]
type=friend
callerid=1001
canrevinite=no
dtmfmode=rfc2833
mailbox=1001
disallow=all
allow=ulaw
transport=udp
secret=password
host=dynamic
context=default
And my extensions.conf
[general]
static=yes
writeprotect=no
[globals]
TRUNK=Skype
[default]
[from-skype]
exten=>9905XXXXXXXXXX,Noop(${CALLERID(name)} , ${CALLERID(num)})
exten=>9905XXXXXXXXXX,n,Dial(SIP/1001,30,t,r)
exten=>9905XXXXXXXXXX,n,voicemail(100|u)
exten=>281203XXXX,Noop(${CALLERID(name)} , ${CALLERID(num)})
exten=>281203XXXX,n,Dial(SIP/1001,30,t,r)
exten=>281203XXXX,n,voicemail(100|u)
The last 3 lines were my best guess at how to tell it what the incoming call phone # is and I'm not sure it's entirely necessary. Any thoughts?

Dear MRLindstrom,
I am sorry to hear that you are having issues receiving incoming calls to your Skype Connect Online number.
In looking at your Asterisk configuration, I would suggest changing your 'incoming call field' (the last 3 lines you have included below) to your 9905xxxxxxxxxx, rather than 281203xxxx.
Please make that change and let us know if you are able to receive calls.
Thank you,
MariaA
Skype Enterprise Support

Can not see incoming calls, like I could in PC Sui...

Hi,
I had PCSuite (latest version off the web-update features) installed, I decided to click on the OVI Suite installation ...
I DL and Installed just fine, after useing the OVI suite and getting used to it i find that I am missing the "online" freatures, like incoming SMS and specially incoming calls are not shown any more.
I have E66 connected via USB in PCsuite mode, and compared to the PCSuite I could right away, before the phone even rang, see a pop-up on the screen, telling me that a incoming call is there.
I liked that feature, as you could click SMS, hangup etc .
How do I get the same feature in the "new" OVI suite ??

This is solved in release 2.0.2.42

I can not see incoming calls after LOLLIPOP update

Hi. When i get a call i cannot see screen, who is calling. It is necessary when phone is locked. Colud you help me?

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

ITunes will not "see" specific folder in music folder

I am new to iPods and iTunes. I got an iPod classic as a gift yesterday so last night I installed iTunes and let it create a library overnight. I sync'd my iPod and all seemed well (~22GB in the library and on the iPod). I wanted to try the iPod so I turned it on and went to play "Hey there Delilah" by the Plain White T's which is in a folder along with all my other albums in mp3 format. It was not on the iPod. I checked iTunes and it was not there either. I tried to import the folder. Nothing happened. I tried to play the songs with iTunes from Explorer. Nothing. If I play in Windows Media Player it works. Any ideas? I have not determined if anything else is missing yet other than this single folder.
Thanks,

+I tried to play the songs with iTunes from Explorer. Nothing.+
That is iTunes's way of telling you there is an incompatibility in the file. iTunes can be sensitive to corruption or variation in the headers, so it is not unusual to have an mp3 that plays fine in WMP but not in iTunes.
You will need to fix it up with a 3rd party program, or else use a conversion program to convert it to WAV and back to mp3 (which usually cleans it up).

Problem of not seeing the misscall

Hi,
After the update 7.0.2 still cannot see the misscalls
This is happen if you are at the mmeting and once the iphone rigns and you sent the caller to busy tone you can not see the caller at the lock screen.
And some how if you youch any of the buttons the miscalls again lost and can only review at the call list
Thank you for your help
Regards
Umut

Hi,
if you cancel a call using the power on/off button it will not be reflected in the notification centre or the locked screen, you will have to see it in the recents in the call log
instead when you recieve a call, instead of rejecting using the top button, if you click on the remind me later and choose 1 hour or other options, then it will be in the notification centre or the locked screen.
this is the current design of ios 7

Help fix my problem, I am not receiving incoming calls on my iphone4

When I am on the phone I can hear when I get an incoming call, but I do not see the call that is coming in. The calls do not show on the screen or give me the option to retrieve the phone call. I have checked the settings over and over, I have reset my cell, I have turned it of and on, and have had people call multiple times to see if it was working again. It has become a big inconvienience.

Hi EndangeredPanda,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Hope this helps ...
- Judy

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything, I have a child that is very ill and I have to have access to a phone at all times can someone help me? It happened one other time when I plugged it in to my to listen to music. I know it is working it said something on voice control. I tried the press the circle button and the top button but the screen only turned white?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

How do I remove my caller id from my samsung convoy phone so that the person I call does not see my name?

How do I remove my caller id from my samsung convoy phone so that the person I call does not see my name?

MojaveMoon's solution will work if there is only one person you want to block your ID from; if you want to block your caller ID from everyone, you can go to your account online, go to Change Features, and scroll down till you see Caller ID block. Instructions say that once this is activated, you can dial *82 before any # you WANT to display your number to, but all others will be blocked.
If you are on a Family share plan, the account owner needs to log in and choose your line to activate this feature.

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

TS3718 Facetime: I can hear the caller but not see them. They can hear and see me. What could be the problem. I am using an I-Pad 2 updated with OS7.

When receiving a Facetime call, I can hear the caller but can not see them. They can hear and see me.

Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

I am facing problem in using viber...can not receive any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls

I am facing problem in using viber...can not receive any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls whn my phone is locked even as i can receive calls on HTC

Hi,
This is an official representative of Viber Media.
Unfortunately we cannot change this feature due to Apple's restrictions. :/
For more questions or technical support, please visit our official HelpDesk.
Thanks,
Viber

1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

Hi. please solve my problem.
.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
thank you in advance.

Hi Ersin,
Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform. However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module. I can think of no reason why the different calling method would be a factor.
When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
Regards,
Nick

Not seeing specific calls

Similar Messages

Maybe you are looking for