Not using LC - Consoscope Member. OLAP Error

Hi experts,
First of all, I have deleted LC member in Consoscope dimensions, and also Script Logic (Instead of LC I use EUR). After processing Conso Application I get this error:
- CubeProcess : Errors in the OLAP storage engine: The attribute key cannot be found: Table: dbo_tblFactConsolidation, Column: CONSOSCOPE, Value: LC.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while processing the 'Consolidation' partition of the 'Consolidation' measure group for the 'Consolidation' cube from the [AppSet] database.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Internal error: The operation terminated unsuccessfully.
Server: The operation has been cancelled.
How could i solve this?
Regards

Hi,
This error is coming because of invalid records in your Consolidation. The reason behind it is the LC member has been deleted from Consoscope dimension. However, records with LC are still present in the fact table. And these records are no longer valid. To check this use the following SQL query in your database.
select * from tblfactConsolidation where Consoscope not in (select id from mbrConsoscope where calc = 'N')
This will give you the list of all the invalid records present in the fact table.
You can delete these statements by
delete from tblfactConsolidation where Consoscope not in (select id from mbrConsoscope where calc = 'N')
After this, try processing your application. It will work fine.
This will help.

Similar Messages

I do not use wireless, but get wireless errors, why?

I do not use wireless, but get wireless errors, why?

Hi Clarence,
I'm using an i Mac O sx 10.6.8 Even though I'm using wired ethernet access, I can turn airport on and let it run while using the wired connection. I suppose that condition may cause the errors you're getting. Is it at all possible that you have your Airport wireless in your Mac Pro turned ON?

Can not use recovery DVD 'Wrong machine' error occurs

My Dealer/Service center replaced the motherboard when I had a start up problem. My recovery DVD which originally comes with the notebook does not work anymore. When I start recovery procedure follow message is shown: 'Wrong machine'.
Is it possible to download new one from the Toshiba website? If yes from where exactly?
My product is registered in October 2004.

Hello
If you use wrong machine as searching term on this forum you will find many similar treads. When motherboard is changed DMI information must be updated. Without this info identification is not possible.
I recommend you to contact service again. They will update DMI info and you will be able to use recovery media again.
Good luck!

Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup?

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

My iPad 2 will not restore using iTunes. It keeps telling me - the iPad "iPad" could not be restored. An unknow error occurred (4) - I have tried every suggestion I could find so far. Any ideas as to what I can do?

My iPad 2 will not restore using iTunes. It just quit a week or two ago and showed that I had to connect to iTunes.
When I do the "restore and update" it does not complete the "verifying iPad restore with Apple" and then shows the following message:
The iPad "iPad" could not be restored. An unknown error occurred (40).
I have tried it a number of times. Also turned of anti-virus and firewall. Tried on different computers. All resulted in the same message. The iPad is only 2 1/2 years old, so I hope it can be fixed.
Does anyone have a solution?
KandAfromMO

Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the proble

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened

https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem.

HT203175 I have no problem signing on to iTunes my issue is once on the site I can not use the "search". It says there is a runtime error R6025 pure virtual function call. Has anyone had this problem and how do I fix it. Thanks

I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks

Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again.

I am trying to burn a music cd on iTunes, but I am getting an error that reads that the cd burner is being used by another application. I know that I am not using the cd burner for anything else. I have restarted the Mac and nothing. Any ideas?

I am trying to burn a music cd on iTunes, but I am getting an error that reads that the cd burner is being used by another application. I know that I am not using the cd burner for anything else. I have restarted the Mac and nothing. Any ideas?

One other thread said it was fixed by waiting till prompted by iTunes to insert the blank disk, instead of putting it in first. Does that work? Found a number of hits on this Googling.

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible or something similar. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible access denied. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
I keep seeing problems and lack of support for MacFUSE, that could change.
http://www.bing.com/search?q=ntfs+for+mac

Whitespace is not allowed at this location. Error while running CP using RDF with XML

Hi All,
I am using RDF report with output type as XML. It have following parameters:
1. Organization Name,
2. Invoice No From
3. Invoice No To
4. Date From
5. Date To
I had developed an RTF and registered that in Oracle Applications. The output comes in Excel file.
When I used to run report using Invoice Number From and Invoice Number To the report is giving normal excel output.
But when I am running using parameters Date From and Date To then XML output is coming after viewing output in CP Output button.
I downloaded that xml file. It is invalid as in the last of xml file it is showing following error message
"Whitespace is not allowed at this location".
Please let me know how can I resolve this problem.
Thanks in advance..
Regards
Sandip

my xml file looks like this....

<XX_ITEM_LOADING>
<LIST_G_BLANKET_NUMBER>
    <G_BLANKET_NUMBER>
      <CUSTOMER>SPS PVT LTD</CUSTOMER>
      <INVOICE_NO>17356</INVOICE_NO>
      <INVOICE_DATE>20-JUL-13</INVOICE_DATE>
      <BUYER_REF>56780YP</BUYER_REF>
      <ITEM_DESCRIPTION>XXCSD</ITEM_DESCRIPTION>
      <NUM_OF_BEANS></NUM_OF_BEANS>
      <CARIRER></CARIRER>
      <SHIP_METHOD_CODE>UK568</SHIP_METHOD_CODE>
      <MODE_OF_TRANSPORT>ROAD</MODE_OF_TRANSPORT>
      <ASSEABLE_VALUE>1134534</ASSEABLE_VALUE>
      <QUANTITY>149</QUANTITY>
      <SOLD_TO>SPS PVT LTD</SOLD_TO>
      <TAN_NO></TAN_NO>
      <ST_REG_NO>943481</ST_REG_NO>
      <EC_CODE></EC_CODE>
      <TERMS>30 NET</TERMS>
      <CUST_PO_NUMBER></CUST_PO_NUMBER>
      <DESTINATION>LONDON</DESTINATION>
      <CP_DAYS>3</CP_DAYS>
    </G_BLANKET_NUMBER>
XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Whitespace is not allowed at this location. Error processing resource 'file:///C:/Users/sys/Downloads/cp_output_date_range....
      <SOLD_TO>DKSP TECHNOLOGIES & ENGG(A DIV. OF PARROT SYSTEM LTD.)</SOLD_TO>
_METHOD_CODE>

TS3212 I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.

I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.

Troubleshooting issues with iTunes for Windows updates - MSVCR80

'You Are Not Using The Correct Type of Phone Cord' Error

Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.

I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me!

Not using LC - Consoscope Member. OLAP Error

Similar Messages

Maybe you are looking for