Not working traffic inside of the same interface

Hi Guys.
I need your help to configure a Cisco ASA 5510.
Connencted the a single interface I have a switch. To this switch (same VLAN) there are connected:
1. The Subnet of the main office (192.168.1.253)
2. A router  (IP 192.168.1.254) that routes the traffic to a remote location (Subnet 192.168.8.0/24)
I have so allowed any traffic incoming to the inside interface as follows:
access-list inside_access_in extended permit ip any any
and I have permitted traffic intra interface as follows:
same-security-traffic permit intra-interface
Then I created a static route:
route inside 192.168.8.0 255.255.255.0 EXTERNAL_ROUTER 1
Now I can successfully ping the destination:
Pinging 192.168.8.10 with 32 bytes of data:
Reply from 192.168.8.10: bytes=32 time=135ms TTL=123
Reply from 192.168.8.10: bytes=32 time=146ms TTL=123
Reply from 192.168.8.10: bytes=32 time=143ms TTL=123
Reply from 192.168.8.10: bytes=32 time=188ms TTL=123
Unfortunately I cannot RDP into that server. When I simulate the connection via Packet tracer, it tells me that the implicit deny on the bottom of the conncections from "inside" (firewall) does not allow the connection.
It sounds to me like that "same-security-traffic permit intra-interface" does work only if there are 2 interfaces and not a single one.
Unfortunately I cannot just unplug the cable and connect it into another port as the ip is on the same subnet and I cannot configure the other end router.
Please help :-(
Thanks,
Dario Vanin

Ahh OK, telco router.
You can quickly test if it's working by configuring the PC with static routes for 192.168.8.0/24 pointing towards the router (192.168.1.254).
Here is sample configuration on TCP State Bypass:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b2d922.shtml
access-list tcp-bypass-acl permit tcp 192.168.1.0 255.255.255.0 192.168.8.0 255.255.255.0
access-list tcp-bypass-acl permit tcp 192.168.8.0 255.255.255.0 192.168.1.0 255.255.255.0
class-map tcp-bypass-cm
   match access-list tcp-bypass-acl
policy-map tcp-bypass-policy
   class tcp-bypass-cm
       set connection advanced-options tcp-state-bypass
service-policy tcp-bypass-policy inside

Similar Messages

  • I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

    I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

    I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?

  • HT4623 i can no longer access Safari.  It's not the phone because Apple just sent a new one and it still does not work.  I use the same computer to sync my ipodtouch5 and it has Safari.  My iphone4 does not.  What is the problem?

    I can no longer access Safari.  It's not the phone because Apple just sent a new one and it  (Safari) still does not work.  I use the same computer to sync my ipodtouch5 and Safari is operable.   However, Safari on my iphone is not.  What is the problem?

    That is the way it works. It designed to do that.
    In addition to everything else you have to this other person's computer you would have to move your complete iTunes library over also. Only then will it recognize youriTouch.
    Allan

  • I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud acount.

    I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge

    Did you set up different email addresses for each device?
    iOS: Using FaceTime
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

  • I have lost my camera icone and my camera is not working how to resolve the same.

    Hi Team,
    Camera on 3gs is not working its d't show the display and i have lost its icon on task manager kindly provide me detail hw can i resolve the same.
    Also one of my iphone in which i have faced charging issue phone is not charged kindly help me regarding the same.

    settings->general->reset->reset home screen layout
    should bring it back

  • TS5376 I have been trying to install Itunes for the past 1.5 days without success.  The method outlined here did not work and gave me the same error messages as before  Runtime error R6034 and  also error 7

    I tried the latest Apple fix to resolve the installation issues of iTunes 11.1.4 and had no success at all.  This was the fix that asked you to remove .dll files and place them on the desktop before unistalling and reinstalling iTunes.  I followed the procedure exactly and obtained the same results as before.
    Namely,
    Runtime Error: R6034 -An application has made an attempt to load the C runtime library incorrectly
    iTunes was not installed correctly.  Error 7.
    At this point, after spending 1.5 days attempting to install iTunes I am giving up.  Hopefully, someone will come up with a fix that really works and I will install it then.

    Hi
    I had the same problem on my PC's with Win 7 and Win XP.
    I solved it this way:
    - De-install iTunes, best with a special tool, like, for example "Your Uninstaller" from Ursoft. Any other un-installer will do the job, provided it cleans the registry of traces from iTunes
    - De-install "Apple Mobile Device Support". This seems to be the culprit. It is a sub-program of iTunes. But if you just de-install iTunes this sub-program stays in your PC. If you still have it on your PC and you try to update to 11.1.4, it will cause these problems.
    - De-install also "Apple Application Support", but I am not sure it is really necessary, but de-installing does no harm, since it will be re-installed automatically.
    - De-install also "Apple Software Support", but I am not sure it is really necessary, but de-installing does no harm, since it will be re-installed automatically.
    - Re-start your PC
    - Download the latest version of iTunes from the Apple webpage and install it.
    For me this worked on both of my PC's.
    Regards
    goletto

  • TS1741 Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

    Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

    Hi JenJen73,
    If you are having issues with AirPlay streaming from your iPad to your Apple TV, you may want to take a look at the troubleshooting steps in the following article:
    Apple Support: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Cheers,
    - Brenden

  • I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

    I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

    You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
    If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.

  • HT3275 My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help

    My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.

    Hello,
    Mac OS X 10.4 Help, I forgot a password in my Keychain
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544
    Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over.

  • When we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/828024]''
    when we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

    See:
    *https://developer.mozilla.org/en/Firefox_4_for_developers#Miscellaneous_DOM_changes
    *http://www.cssplay.co.uk/menu/tablescroll.html
    A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
    The helpers at that forum are more knowledgeable about web development issues.<br />
    You need to register at the mozillaZine forum site in order to post at that forum.<br />
    See http://forums.mozillazine.org/viewforum.php?f=25

  • I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution?

    I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?

    Invoke your warranty and take it back.

  • All of a sudden, Adobe Flash is not working. Have installed the latest version to no avail. This happened at the same time on four (4) computers! Any suggestions?

    Question
    All of a sudden, Adobe Flash is not working. Have installed the latest version to no avail. This happened at the same time on four (4) computers! Any suggestions?

    Well, I kinda figured that was true, so I disabled it. Firefox does not lock up now. I suspect it might be a Google Finance page graph that is causing the problem, rather that Flash. Thanks for all your help. J

  • Crackling audio (not sure if this is the "same" problem)

    I have been experiencing crackling audio under certain circumstances with my Soundblaster X-Fi XtremeMusic. I am no audio expert, but it seems to me that the problem occurs when multiple?"types" of audio are played at the same time. For example, in a game, when voices are played over pre-existing background music, the audio on the voices will get crackly and staticky. This is recreatable in GTA4; that game uses a third-party interface (Microsoft Li've) to track game progress and post updates inside of the game. The game's internal audio is fine, but any sounds "inserted" into the game by Microsoft Li've will be all crackly because they seem to be "competing" with the existing sound effects from the game. It gets really annoying at times.
    The "trigger" for this issue?was when I upgraded to a newer NVidia driver for my 7950GX2 graphics card. My sound was fine for years until I updated the driver to 72.xx and newer. However, I am not just talking about the newest driver. This has been happening since June and continues to happen with every NVidia release since then. This happens with every driver beyond 72.xx and now I am using 80.xx. Reverting drivers back to pre June 2008 is most definitely not an option, because I play current games and I update NVidia drivers on a weekly basis as new ones are released.
    When the new X-Fi driver came out, I thought finally this problem would be resolved. However, the new driver did nothing to resolve the problem at all. I have tried all versions of the X-Fi driver from 2004 to the present. Nothing fixes the problem.
    Suggestions are welcome... :smileyindifferent:

    FRe: Crackling audio (not sure if this is the "same" problem)? Hi, I used to post in these forums a couple of years ago, after an Audigy 4 literally corrupted my hard disk and nearly killed my motherboard's SATA controller.
    Anyway, after a lot of debate etc. it turned out that post-Audigy Sound Blasters, including X-Fis, are extremely sensiti've to PCI timing issues and have horrible bus mastering themselves, something which was NEVER quite fixed and keeps popping up time and again. In the best of cases you will get static, in the worse cases you will get BSODs, corrupted data, or even actual damage to the hardware. Not much you can do, really, than putting up with it, like many other users before you did.
    P.S.: I'm sure that shortly after this post, a certain user will chime in and start raving about how most chipsets and RAM modules are garbage, and how he uses a super-duper "golden pick" reliable system with a chipset that does everything "nice and slow" and super-reliably and ofc works wonders with ANY "problematic" CL card to date,? and how it's not really CL's fault but that of the garbage mobos, chipsets, ram etc.

  • SRP521W - Local and Remote Traffic Cannot be the Same Subnet Address

    I support an existing VPN infrastructure with PIX, Juniper NS5GT, and Netopia devices used as VPN endpoints. In all cases, I can create a VPN where the location's internal subnet, 10.x.y.0/24 sends traffic to 10.0.0.0/8 out the VPN tunnel. In the case of this 521W that we are evaluating, it appears that I cannot do this. Insteadm when creating the IPSEC policy I get this error "Local and Remote Traffic Cannot be the Same Subnet Address." Which, while strictly true, has never been an issue with all the above devices. Is there a workaround or other methodology to support this?
    Thanks.

    We have extactly the same problem with the SRP527W. Other Cisco small business products work like.
    Cisco RV 120W
    http://www.cisco.com/en/US/products/ps10852/index.html
    Cisco WRV210
    http://www.cisco.com/en/US/products/ps9929/index.html
    We need a device with that supports one IPSec VPN and one ADSL interface and is easy to use like these devices.

  • Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

    Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

    Satellite L505D-S5983
    I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
    Then add things carefully, rebooting Windows and testing the USB and audio at each step.
    Please note this.
    The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
    Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
    All of the latest drivers for your model are easily found here. This one is for the sound.
       Realtek Audio Driver for Windows 7 (32/64)
    -Jerry

Maybe you are looking for

  • Error on the r12 about workflow

    what error on this foe workflow noticfiction? System: Error Local Event ERROR : oracle.apps.fnd.system.exception / 4206714 thanks

  • Wallpaper switch to solid color after log-out  / log-in between different user account on the same iMac

    On my iMac, i created different accounts for the member of the family. When i switch from one to an other account and go back to the first account the wallpaper change automaticly to a solid color wallpaper. I have tried all the solution described on

  • How to print in black and white only on hp photosmart 6520

    Cannot find a place to select print in black and white only on my HP Photosmart 6520 printer. It prints color just fine, but sometimes I do not want to use my color cartridges. I selected B&W instead of gray scale, but cannot stop the color printing.

  • BW Reporting Database in BW

    Has anybody ever seen BW Functionality used to create an application which can then be used by business users to identify reports in BW, based on Input Parameters ( eg. Sales Org, Material, Division etc. ) and / or Key Figures ( eg. Shipment Value, O

  • Arrays to stacks

    does anyone know how I can get some numbers from an array into a stack thanks henry