HT4623 i can no longer access Safari. It's not the phone because Apple just sent a new one and it still does not work. I use the same computer to sync my ipodtouch5 and it has Safari. My iphone4 does not. What is the problem?
I can no longer access Safari. It's not the phone because Apple just sent a new one and it (Safari) still does not work. I use the same computer to sync my ipodtouch5 and Safari is operable. However, Safari on my iphone is not. What is the problem?
That is the way it works. It designed to do that.
In addition to everything else you have to this other person's computer you would have to move your complete iTunes library over also. Only then will it recognize youriTouch.
Allan
Similar Messages
-
Not sure if my question should be here or above. So I'll repeat it.
I have a new Nano and an old one. Would like to synch new one to all songs and audible books in my iTunes Library. Would like to synch the old one for just audible books.
How can I do this?Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M. -
my phone broke. i just got a new one. i am trying to backup my old one, but it won't let me because it has a password on it. is there anyway i can go thru this?
If you are using the computer that you normally backup and sync with, it shouldn't be asking for a passcode. If you are not, then you would need to enter it, and I understand that you cannot. There is no way around this requirement, so your only alternative is to use the last backup that you made of the device. Hopefully it wasn't that long ago.
-
My Iphone was previously Jailbroken, but then I tried to update it and the update never completed. So i deleted Cydia off of the phone, then I tried to update it again. It still didn't work, so I tried to restore it, but it didn't work error 21. Now my phone is a paper weight, i just need to restore my phone so i can update it and reload my phone back to normal.
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Try google... -
Hi, I'm currently using iPhone 4 and iPad 2 with the same Apple ID, now I want to change my iPad 2's Apple ID to a new one so that it can be seperated from my iPhone 4's Apple ID. However, when I tried to change my iPad 2's Apple ID, my iPhone 4's Apple ID also changed. But I want to maintain the same old Apple ID for my iPhone 4 and try to change the iPad 2's Apple ID to a new one so that I can get it to my kid to use it. I would be most grateful if anyone in this forum can advice me on how to change my iPad 2's Apple ID and I can still maintain the old Apple ID for my iPhone 4? Thanks a lot in advance.
Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
To create a new Apple ID on your iPad 2:
1) Go into Settings > Store.
2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
3) After you sign out, now click the "Sign in" button.
4) Tap "Create New Apple ID" and follow the instructions on-screen. -
I need to figure out how to get IMessage.
The chances are your replacement came with an older version of iOS. Go to Settings > General > About > Software Version... does it say something between 4.0 and 4.3.5?
Plug it in to a computer with iTunes to update it. When you launch iTunes it should prompt you to update to iOS 5.1. -
just what it say at the top
Sounds like you synced your new phone to his backup, not yours. Reset the phone and try again. Or maybe Restore will let you resync it, I'm not going to try it on my phone to find out.
-
I am unable to access my gmail account on my iPhone or my iPad three. I get an error message saying that either my user name or password is incorrect. I have deleted my account and restarted my iPad or iPhone but it still will not work. Can anybody help me please?
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
Laptop has been broken.. so I need to download Itunes on a new computer so I can sync media, back up apps etc and also update software... Is it as simple as that.. download Itunes then re register my phone?
You also need to restore the itunes library, along with any other relevant data from the backup you made of your old computer before it died.
You can NOT sync music TO the computer from the iPhone unless it is music that was purchased from iTunes.
You may want to take a look at More Like This, to the right, as this subject comes up on very nearly a daily basis and has been addressed extensively here. -
I can no longer access iTunes?
After the last update, I can no longer access iTunes movies or TV shows on my Apple TV. Why?
Purchase music and Movie from iTune Store (iPad)
iTune Store>Music/Movies -
I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?
Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.
-
Ever since I installed Safari 5.1 on my PC (XP) I can no longer access the pdf files on my website. I have no problems with Chrome and Firefox. I keep on getting a message from WebKit2WebProcess.exe that the LogTransport2.dill was not found. (I HATE PCs...) I tried reinstalling Acrobat 9. I tried reinstalling Safari. I even tried an older version of Safari. Nothing Helped. Others have tried it on their machine, and it worked fine. But I do not know what is the matter with mine. I suspect the root cause is the missing LogTransport2.dill file. But I do not know how to go about getting it. Your help is truly appreciated. My website is http://www.hlmartworks.com.
I have also found the article that provides 3 solutions but none of the solutions worked.
-
HT4623 can no longer access messenger on ipod touch 3
can no longer access messenger on ipod touch 3 ???
Without more information all I can suggest is
iOS: Troubleshooting Messages -
On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...
The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar. -
Can no longer access Netgear Router
We have been using a Netgear MR 314 router for years for both Wireless and Ethernet wired activity on our G4, G5 and MacBooks. We recently upgraded to Safari 4.0.1 on all 3 machines. Internet, file sharing, screen sharing, home networking all work just fine.
What mystifies me is that I can no longer access router data (192.168.0.1 + password) to do whatever on any of the machines with Safari 4.0.1. I click the tabs on the router (Wizard, Advanced, Maintenance) and nothing happens beyond the 'Welcome' screen. In order to get access to the router I have to use a Dell XP machine. Then I can get into the router with no problem. It's not a big deal, but any ideas?
Yes, yes - all of the MAC ID's for all computers and wireless adapters are still in the router configuration table as tested today with the Dell. So, again, any ideas ??
ThanksFrom what you describe, it seems that Netgear deliberately chose to make their web-based management system for their routers focused on Windoze and it's browsers, so either they're using non-compliant HTML, or they're browser sniffing and rejecting anything that isn't IE or Firefox on Windoze. You should complaint to them and let them know how upset you are. There's really no excuse for that, especially since they don't disclose it prior to or after you buy it, and it just shows how lazy they really are when designing these systems.
You should open Safari's Preferences>Advanced window and enable the Debug menu, then go to that menu on the menu bar and use the User Agent sub-menu to select a different browser (Firefox for Windoze) and see if that will give you access again.
Maybe you are looking for
-
How to stop while loop from looping
Hi, need a little help in the respect to while loops. Basically i have a while loop within an while loop within another while. So what i want to do is run the program within the outer while loop. The problem is that when i start the program it runs o
-
Workflow problems...
Hi partners! I'm working like basis here but right know we don't have the person of workflows and I need to resolve an issue. Two managers don't receive the request in the outlook that are receiving in the inbox of the portal like curses approve, clo
-
Is there any way to enable Home Sharing with a computer on an external network? I have a mac at work that I'd love to be able to synchronize with my home computer. It's already authorized. Do I need to setup port forwarding on my router? Will it even
-
Facing issue during the export of the oracle system_ system copy
Dear All, We are exporting the R3E 47 / oracle database 9.2.0.5.0. I am facing an error in the database export phase. Dbsl Trace : Error 12535 in stmt_fetch() Dbsl Trace: ORA-12535 occured when executing SQL statment ( parse error offset=373) (EX
-
Receiving idocs from multiple systems
I got to receive two different idocs from two differnt systems and both are to be mapped to one target structre. Is this scenario is possible without using BPM ? If so coupld you plz advise the design ? Is there any literature which talks abt this sc