Note velocities don't exist, cannot be created

Video Version
The problem is shown in this 1-minute video on YouTube.
Text Version
Because I never used the old version that much, I installed the new improved GarageBand 10.0.1
I've entered some notes using my MIDI Keyboard (Controller). Although their velocity values show when I hover my mouse over the notes in Piano Roll View, the "MIDI Draw" region underneath it is empty. Selecting notes in the PIano Roll does not help. The "Controller" popup on the left is blank. When I click that popup, I get a menu including Volume, Modulation, Expression, … Note Velocity, etc. But upon choosing one, the popup reverts to blank. I can draw lines using the mouse in the MIDI draw area, but the lines disappear when I release the trackpad to end them.
Someone please tell me what is the trick.

Thank you, lukasz_nou. You've convinced me that the MIDI controller thing in GarageBand 10 is buggy.
When I tried it today, I couldn't reproduce the problem. So I've submitted the original problem to http://bugreport.apple.com. The original problem now has this number: 15647648.
While I was doing that, I discovered another problem: The slider doesn't always appear. So I made a new YouTube video showing this new problem. I also reported a bug on that, 15647695.
Epilog: I don't think I'm going to be using GarageBand that much. Since then, I've noticed an even bigger bug, which is that GarageBand STILL cannot export a MIDI file! Well, I've since realized that is not a bug in Apple's view. GarageBand is the free trial version of Logic, which they want me to buy. I just wonder if Logic is as buggy with stuff like this.

Similar Messages

Error in file receiver adapter (Directory does not exist / cannot be create

I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??

Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK

ITunes is syncing Notes that don't exist

I have recently changed the login details on my PC from a peer-to-peer network to being attached to a domain. After the changeover I had to reset all of my iTunes options for my new login.
After syncing with my iPhone 4 with Outlook 2007, I now have two sets of "Notes" on my phone but there is only one Notes folder in Outlook.
Can anyone tell me how can I merge these two sets of Notes on my phone, please?

When you reach the limit of 5 then you can deauthorize all, then authorize the active computers.
iTunes Store: About authorization and deauthorization

Cluvfy returns Path "/tmp/" does not exist and cannot be created on nodes

Hi,
I'm installing Oracle RAC for SAP in AIX 5L.
After run Pre-check for cluster services setup it returns the next message:
Path "/tmp/" does not exist and cannot be created on nodes
This meessage is happening after Checking node reachability and Checking user equivalence phases.
This is my complete log:
pr_bd01/oramedia/clusterware/Disk1/cluvfy/> ./runcluvfy.sh stage -pre crsinst -n pr_bd01,pr_bd02
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "pr_bd01".
Checking user equivalence...
User equivalence check passed for user "oracle".
ERROR:
Path "/tmp/" does not exist and cannot be created on nodes:
pr_bd01
Verification will proceed with nodes:
pr_bd02
Pre-check for cluster services setup was unsuccessful on all the nodes.
The /tmp is a shared filesystem and oracle user can write and read it
Oracle user id is the same in both nodes
Group dba id is the same in both nodes
Group oinstall id is the same in both nodes
The primary group for Oracle user is oinstall
Where can my problem be ?
Thank you
Edited by: user8114467 on 27/02/2009 07:17 AM

Hi,
Even if this is not resolved from above stuff then do the following
[oracle@node1] ssh node1 date
[oracle@node2] ssh node2 date
Note that it is doing the ssh to itself rather than the remaining node(s). Usually people do forget to do atleast once the ssh to itself.
Talok Khatri

Ipod not syncing music, "cannot sync, playlists don't exist"

I just downloaded a few CDs to my iTunes and I tried to sync it up, but it said that my playlists don't exist anymore. Yet, they were still all there when I tried to sync it. Any help would be graciously appreciated!
Dell Windows XP Pro

Your iPod preference must have got set to sync specific playlists rather than all and there are no playlists selected. At any rate, if you had been syncing playlists, go to that screen and reselect the playlists then resync.
Patrick

Create nested directory on FTP folder if they don't exist while uploading file

How can I create nested directory on FTP folder if they don't exist. A local file is suppose to exactly uploaded in the same directory structure level in ftp folder. My question is -
1. Is there any C# opensource/free library that take care of creation of all sub-directories from file-path, if they don't exist on ftp and upload the file in one shot.
2. How much it will be feasible to make all these uploads along with some database update, archive, quarantine task in asynchronous? All succeeding tasks are sequentially depends in their order.i.e. ftp upload >> database update>> archive
from local >> quarantine the folder
This really requires parallel & asynchronous operation for heavy upload/transfer and going to be done by a Windows-Service.

Hello,
Your Subject:
>Sender File adpter --don't raise alerts when file does not exist in folder
is contradictory to your question.
>if the file does not exist,it is throwing an alert like "Could not process file '.file..xml: No such file or directory '
> Is there any way i can avoid raising an alert if file does not exist in the source folder.
I know you want to say "Don't Raise alerts when file does not exist in folder". Correct me if I am wrong.
Some times it happens, when we write the right thing but it means something else and this is the reason many experts have replied, "how to raise an alert". So if you remove the word "Sender File adapter" from your subject then it will be easy to understand the exact meaning.
Regards,
Sarvesh

OBIEE 11g - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.

OBIEE 11g - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.
Appreciated if you could able to help as soon as possible as I don' have back up for these disappeared reports.
Pleas let me know if any additional information needed.

Hi
Thank you for the reply.
Here one thing I would need to mention that those are created by me on last week, but when I check those today, I could not able to see or even admin also not able to see those. For sure no migration and updations happend over the week end, really not able to debug whats the issue around. Unfortunately I haven't taken back up as well.
Please could you help and let me know whats the root cause and how I could able to restore.
Best regards,
Kumar

Data type change made to schema.xml of comments list which is part of blog site template is not reflecting in the existing site but working fine when new site is created.

Hi,
I have created a blog site with the available site template few days back. Now we have the requirement of having the attachments in the body of the comments section.
So, I updated the schema.xml of the comments list available under ../templates/blog/lists/comments/schema.xml to have rich text for the Body field.
With this change, I created a new site and it was working fine. Change is reflected in the new blog site.
However, this particular change is not reflected in the existing blog site. Any changes made to the schema.xml is not effecting the old blog site.
Can anyone suggest what can be done for the change to be reflected in the old blog site?
Thanks in Advance,
Regards, Keerthi Suryadevara

Hi,
According to your post, my understanding is that you wanted to add attachments in the body of the comments section.
You can add the the Code inside the Default list pages. For more information, you can refer to:
Enable Attachment in SharePoint Blog post list and display the list Attachments
In addition, you can add an enhanced rich text field to the comment list and remove the body field. Then you can insert files into comments, too.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/77194/how-to-add-attachments-for-comments-list-in-sharepoint-blog-2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

ORA-20211: Active job does not exist, cannot link to job record.

Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert comments

Hi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos

Itunes will not open; it says it cannot be read because it was created by a newer version. What do I do

itunes will not open; it says it cannot read because it was created by a newer version. HELP!

Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Create Accounting could not be done after voiding some payment.

Hi,
I am facing a unique problem. We have some payments which have been accounted properly and transferred to GL. But for some business issue we have to cancel those payments. But when we have voided those payments and tried to create account it it showed message "App-SQLAP-10710: Online Accounting could not be created please submit payables accounting process istead to create accounting entries for this transaction." But when I ran the Payables Accounting Process the problem remains. Now we are facing problem because we are having Period Close Exceptions Report.
Please help me.
Rubayat Newaz Khan

Hi Rubayat;
I am facing a unique problem. We have some payments which have been accounted properly and transferred to GL. But for some business issue we have to cancel those payments. But when we have voided those payments and tried to create account it it showed message "App-SQLAP-10710: Online Accounting could not be created please submit payables accounting process istead to create accounting entries for this transaction." But when I ran the Payables Accounting Process the problem remains. Now we are facing problem because we are having Period Close Exceptions Report. What is your EBS version and OS?
Please follow below and see its helpful:
APACCENG APP-SQLAP-10710 Create Accounting does not process for Cancelled Invoice and for Voided Payment [ID 124469.1]
Accounting For Voided Payment Fails with APP-SQLAP-10710 [ID 229910.1]
Online Accounting Could Not Be Created For Standard Invoice [ID 401709.1]11.5 AP APXPAWKB:Cannot Run Create Accounting For A Reconciled Payment. [ID 233823.1]
APACCENG - Cannot Account For a Prepayment [ID 200693.1]
Regard
Helios

Viewobject rows don't exist when creating a lot of rows at once

Hello,
I'm creating a lot of rows at once in a viewobject. Let's say between 100 and 700 rows. After that, I commit the transaction. After the creation of every row I do a postchanges().
When this is all done, a xml file is sent to another server and returns the same file with a bit more information. That file is parsed and every row will be searched in the Viewobject but then they don't exist!
When I try this with a couple of rows, 10 or something, everything goes well. Is this a known problem or am I doing something wrong? I don't want a commit after the creation of every row because sending must succeed before saving them.

No off course.
I hoped that more people have problems with inserting a lot of rows at once. The code is quite simple, it looks a bit like this:
for ( about 500 elements )
Row row = voIterator.createRow();
row.setAttribute("...", "....");
voIterator.insertRow(row);
getDBTransaction().postChanges();
getDBTransaction().commit();

Alarm not working. cannot set/create new

I have an iphone 5c running 8.0.2
I was having issues with sending text messages so I looked up similar problems and ended up having to reset network settings. this resolved the issue with the text messages but now I cannot set/create new alarms and all of my previous alarms were deleted. seems odd that the two are somehow connected but that is all I can think of that I have done since this morning (where it worked just fine).
this is very frustrating, any help is appreciated.

I am having the same problem with my Iphone 4s running 8.0.2
I noticed yesterday that all of my set alarms were deleted. When I go to add a new alarm, nothing appears after I press 'save'. The small alarm icon appears in the top right for a moment, but disappears after a split second.
There is no error message.
I've used the same alarms for years without any problems.

Inspection Lot Created but not shown in QE72, and cannot input result or UD

Hi Exports,
I have Inspection Lot Created by 04-production goods receive, but not shown in QE72, and cannot input result or UD
Inspection Lot status: CRTD CHCR SPRQ,
in Business Process of inspection lot showing:
*Cancel inspection lot
Assign RMA proc. to insp. lot
Assign notification to lot RMA
Batch log indicator required
Certificate missing
Change inspection lot
Change planned lot quantity
Choose task list for insp. lot
Confirm Receipt of Certificate
Create part. lot for insp. lot
Flag cancellation
Inventory posting required
Lock
Lot for process documentation
Lot reset allowed
What is going wrong?
BTW, the sampling procedure in Inspection Plan is a read-only field, but empty inside.
Daniel

Dear in your case there is no Inspection plan was attached to the lot so attach the plan and make lot status to REL then only you can do Results Recording.
Inspection plan gets auto assigned to availble inspection plan on respective date if you enabled the inspction with tasklist and automatic assignment boxes in relevant inspection types in MM QM view for this Inspction plant should be made avaialble in stsyem before any lot created which can be created QP01.
If it is not getting assiged automatically then you can assign it manually by QA02 here go to inspection specification tab click on Task list assignment the go to sample tab and click on sample and SAVE Inspection plan will be attached to inspection plan.
Once inspection plan is the lot status you can see REL before assignment of a plant it would be CRTD.
Cheers
KK

Package javax.servlet does not exists - Cannot resolve symbol

Hello,
I am using JDK 1.3.1.06 version. I wanted to compile a simple servlet using this. But I am getting plenty of errors for all javax package. Why it is not able to find javax package classes?
The following is the program I have tried to compile.
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class TestServlet extends HttpServlet
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
process(request, response);
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
process(request, response);
private void process(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
PrintWriter out = response.getWriter();
out.println("Hello World !");
I am getting errors like this :
Package javax.servlet does not exists.
cannot resolve symbol
symbol : class HttpServlet
Please advice me some solutions fast.
Thanking you,
ForumAns.

javax.servlet doesn't come with the standard jdk. It's part of J2EE.
If you have tomcat, you can use the server.jar that comes with tomcat.
Or you can just download J2EE sdk instead.
I am getting errors like this :
Package javax.servlet does not exists.
cannot resolve symbol
symbol : class HttpServlet

Note velocities don't exist, cannot be created

Similar Messages

Maybe you are looking for