Notification activity's message must have a respond attribute name 'RESULT'

I've created a basic approval notification using the WFSTD_APPROVAL lookup type of Approve or Reject. I have it routing so that if the document is rejected it directs to the "End" Function Activity and if the document is approved it continues on with the remaining workflow. I keep getting this error when trying to save or verify the workflow. "Notification activity's message must have a respond attribute name 'RESULT' with lookup type 'WFSTD_APPROVAL'" Can anyone please direct me as to how I would set this respond attribute or how can I get rid of the warning message?

Hi,
On the message (within Workflow Builder), click on the Result tab, and populate the details of the result type, display name (prompt) etc. there. This will need to match the result type of the notification.
That should do it!
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Similar Messages

Proxy generation terminated: Message must have exactly one part

hi experts,
i have tryed to create a proxy in abap but it gives an error message
Proxy generation terminated: Message must have exactly one part
Message no. SPRX046
can any one help me
the wsdl document is
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions">
−
     <wsdl:types>
−
     <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified">
−
     <xsd:simpleType name="char1">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="1"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char10">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="10"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char100">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="100"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char20">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="20"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char220">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="220"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char30">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="30"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char32">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="32"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="char50">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="clnt3">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="3"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="numeric15">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="15"/>
<xsd:pattern value="\d*"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="numeric3">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="3"/>
<xsd:pattern value="\d*"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:simpleType name="numeric6">
−
     <xsd:restriction base="xsd:string">
<xsd:maxLength value="6"/>
<xsd:pattern value="\d*"/>
</xsd:restriction>
</xsd:simpleType>
−
     <xsd:complexType name="ZCAF_DEP_QUEST">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="DEPQTN_ID" type="tns:numeric15"/>
<xsd:element name="QTNID" type="tns:numeric15"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_ANSWER_META">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="HAS_COMMENT" type="tns:char1"/>
<xsd:element name="HAS_MULTI_CHOICE" type="tns:char1"/>
<xsd:element name="MULTISELECT_ALLO" type="tns:char1"/>
<xsd:element name="NA_POSSIBLE" type="tns:char1"/>
<xsd:element name="DATA_TYPE" type="tns:char1"/>
<xsd:element name="VALUE_TYPE" type="tns:char1"/>
<xsd:element name="DISPLAY_TYPE" type="tns:char1"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_QUEST_GROUP">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="QTNGRPID" type="tns:numeric15"/>
<xsd:element name="TITLE" type="tns:char30"/>
<xsd:element name="REPLACE_TEXT" type="tns:char30"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="DESCRIPTION" type="tns:char30"/>
<xsd:element name="HEADER_TEXT" type="tns:char20"/>
<xsd:element name="CREATED_BY" type="tns:char20"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="RELEASE_STATUS" type="tns:char10"/>
<xsd:element name="VERSION" type="tns:char10"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_COMMENT_ANS">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="COMMENT_ANS_ID" type="tns:numeric15"/>
<xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
<xsd:element name="TEXT_COMMT_ID" type="tns:numeric15"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_ANS_CHOICE">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="HAS_COMMENT" type="tns:char1"/>
<xsd:element name="SEQ_NUM" type="xsd:int"/>
<xsd:element name="ANSWER_TEXT" type="tns:char50"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="WEIGHT" type="xsd:int"/>
<xsd:element name="HAS_DEP_QTN" type="tns:char1"/>
<xsd:element name="HAS_DEP_QTNGRP" type="tns:char1"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_QUESTION">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="QTNID" type="tns:numeric15"/>
<xsd:element name="QTNGRPID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="QTN_TEXT" type="tns:char100"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="CREATED_BY" type="tns:char20"/>
<xsd:element name="QTNWEIGHTAGE" type="xsd:int"/>
<xsd:element name="VERSION" type="tns:char10"/>
<xsd:element name="RELEASE_STATUS" type="tns:char10"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_MULTI_ANS">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="MULTIPLE_ANS_ID" type="tns:numeric15"/>
<xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
<xsd:element name="ANSWER_TEXT" type="tns:char50"/>
<xsd:element name="ANS_VALUE" type="xsd:int"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_COMENT_TEXT">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="TEXT_COMMT_ID" type="tns:numeric15"/>
<xsd:element name="TEXT_COMMENT" type="tns:char50"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_DEP_QTNGRP">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="DEP_QTNGRP_ID" type="tns:numeric15"/>
<xsd:element name="QTNGRPID" type="tns:numeric15"/>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_ANS_SHEET">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="ANSSHEET_ID" type="tns:numeric15"/>
<xsd:element name="QTNRID" type="tns:numeric15"/>
<xsd:element name="STATUS" type="tns:char1"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_QTNR_QTNGRP">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="QTNRID" type="tns:numeric15"/>
<xsd:element name="QTNGRPID" type="tns:numeric15"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_QUESTIONIRE">
−
     <xsd:sequence>
<xsd:element name="MANDT" type="tns:clnt3"/>
<xsd:element name="QTNRID" type="tns:numeric15"/>
<xsd:element name="TITLE" type="tns:char30"/>
<xsd:element name="REPLACE_TEXT" type="tns:char30"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="DESCRIPTION" type="tns:char30"/>
<xsd:element name="HEADER_TEXT" type="tns:char20"/>
<xsd:element name="CREATED_BY" type="tns:char20"/>
<xsd:element name="RELEASE_STATUS" type="tns:char10"/>
<xsd:element name="VERSION" type="tns:char10"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="BAPIRET2">
−
     <xsd:sequence>
<xsd:element name="TYPE" type="tns:char1"/>
<xsd:element name="ID" type="tns:char20"/>
<xsd:element name="NUMBER" type="tns:numeric3"/>
<xsd:element name="MESSAGE" type="tns:char220"/>
<xsd:element name="LOG_NO" type="tns:char20"/>
<xsd:element name="LOG_MSG_NO" type="tns:numeric6"/>
<xsd:element name="MESSAGE_V1" type="tns:char50"/>
<xsd:element name="MESSAGE_V2" type="tns:char50"/>
<xsd:element name="MESSAGE_V3" type="tns:char50"/>
<xsd:element name="MESSAGE_V4" type="tns:char50"/>
<xsd:element name="PARAMETER" type="tns:char32"/>
<xsd:element name="ROW" type="xsd:int"/>
<xsd:element name="FIELD" type="tns:char30"/>
<xsd:element name="SYSTEM" type="tns:char10"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZCAF_ST_GET_QUESTIONNAIRE">
−
     <xsd:sequence>
<xsd:element name="QTNID" type="tns:numeric15"/>
<xsd:element name="QTN_TEXT" type="tns:char100"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="HAS_COMMENT" type="tns:char1"/>
<xsd:element name="HAS_MULTI_CHOICE" type="tns:char1"/>
<xsd:element name="MULTISELECT_ALLO" type="tns:char1"/>
<xsd:element name="NA_POSSIBLE" type="tns:char1"/>
<xsd:element name="DATA_TYPE" type="tns:char1"/>
<xsd:element name="VALUE_TYPE" type="tns:char1"/>
<xsd:element name="DISPLAY_TYPE" type="tns:char1"/>
<xsd:element name="ANS_CHOICE" type="tns:ZTCAF_GET_ANS_CHOICE"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZSCAF_ANS_CHOICE">
−
     <xsd:sequence>
<xsd:element name="ANS_CHOICE_ID" type="tns:numeric15"/>
<xsd:element name="ANS_META_ID" type="tns:numeric15"/>
<xsd:element name="HAS_COMMENT" type="tns:char1"/>
<xsd:element name="SEQ_NUM" type="xsd:int"/>
<xsd:element name="ANSWER_TEXT" type="tns:char50"/>
<xsd:element name="LANGUAGE" type="tns:char10"/>
<xsd:element name="WEIGHT" type="xsd:int"/>
<xsd:element name="HAS_DEP_QTN" type="tns:char1"/>
<xsd:element name="HAS_DEP_QTNGRP" type="tns:char1"/>
<xsd:element name="DEP_QTN" type="tns:ZTCAF_DEP_QTN"/>
<xsd:element name="DEP_QTNGRP" type="tns:ZTCAF_DEP_QTN_GRP"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZTCAF_GET_DATA_QUESTIONNAIRE">
−
     <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_ST_GET_QUESTIONNAIRE"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZTCAF_GET_ANS_CHOICE">
−
     <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZSCAF_ANS_CHOICE"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZTCAF_DEP_QTN">
−
     <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_DEP_QUEST"/>
</xsd:sequence>
</xsd:complexType>
−
     <xsd:complexType name="ZTCAF_DEP_QTN_GRP">
−
     <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:ZCAF_DEP_QTNGRP"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
−
     <wsdl:message name="ZMCAF_CRUD_QUESTIONNAIRE">
<wsdl:part name="IS_ANSCHOICE" type="tns:ZCAF_ANS_CHOICE"/>
<wsdl:part name="IS_ANSMETA" type="tns:ZCAF_ANSWER_META"/>
<wsdl:part name="IS_ANS_SHEET" type="tns:ZCAF_ANS_SHEET"/>
<wsdl:part name="IS_COMM_ANS" type="tns:ZCAF_COMMENT_ANS"/>
<wsdl:part name="IS_COMM_TXT" type="tns:ZCAF_COMENT_TEXT"/>
<wsdl:part name="IS_DEPQTN" type="tns:ZCAF_DEP_QUEST"/>
<wsdl:part name="IS_DEPQTNGRP" type="tns:ZCAF_DEP_QTNGRP"/>
<wsdl:part name="IS_MULT_ANS" type="tns:ZCAF_MULTI_ANS"/>
<wsdl:part name="IS_QTNR_QTNGRP" type="tns:ZCAF_QTNR_QTNGRP"/>
<wsdl:part name="IS_QTN_GRP" type="tns:ZCAF_QUEST_GROUP"/>
<wsdl:part name="IS_QUESTION" type="tns:ZCAF_QUESTION"/>
<wsdl:part name="IS_QUESTIONNAIRE" type="tns:ZCAF_QUESTIONIRE"/>
<wsdl:part name="IV_CHOICE" type="tns:char1"/>
<wsdl:part name="IV_QTNR_ID" type="tns:numeric15"/>
<wsdl:part name="IV_TYPE" type="tns:char10"/>
</wsdl:message>
−
     <wsdl:message name="ZMCAF_CRUD_QUESTIONNAIREResponse">
<wsdl:part name="ET_QTNR_GET_DATA" type="tns:ZTCAF_GET_DATA_QUESTIONNAIRE"/>
<wsdl:part name="RETURN" type="tns:BAPIRET2"/>
</wsdl:message>
−
     <sap:Feature name="design_0 " uri="http://www.sap.com/webas/630/soap/features/authentication/">
−
     <sap:Property qname="n0:AuthenticationLevel">
<sap:Option value="n0:Basic"/>
</sap:Property>
</sap:Feature>
−
     <wsdl:portType name="zwsquestionnaire">
<sap:useFeature feature="tns:design_0 "/>
−
     <wsdl:operation name="ZMCAF_CRUD_QUESTIONNAIRE">
<wsdl:input message="tns:ZMCAF_CRUD_QUESTIONNAIRE"/>
<wsdl:output message="tns:ZMCAF_CRUD_QUESTIONNAIREResponse"/>
</wsdl:operation>
</wsdl:portType>
−
     <wsdl:binding name="zwsquestionnaireSoapBinding" type="tns:zwsquestionnaire">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
−
     <wsdl:operation name="ZMCAF_CRUD_QUESTIONNAIRE">
<soap:operation soapAction=""/>
−
     <wsdl:input>
<soap:body use="literal" namespace="urn:sap-com:document:sap:rfc:functions"/>
</wsdl:input>
−
     <wsdl:output>
<soap:body use="literal" namespace="urn:sap-com:document:sap:rfc:functions"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
−
     <wsdl:service name="zwsquestionnaireService">
−
     <wsdl:port name="zwsquestionnaireSoapBinding" binding="tns:zwsquestionnaireSoapBinding">
<soap:address location="http://localhost:8000/sap/bc/srt/rfc/sap/ZWSQUESTIONNAIRE?sap-client=000"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

OK , could you please help me?
SAP error message;
Proxy generation terminated: Message must have exactly one part
Diagnosis
In a WSDL document, a <message> must contain exactly one <part>, therefore:
<message name="check_serviceHttpGetIn">
<part .../>
</message>
WSDL document;
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
   <wsdl:types>
     <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
       <s:element name="check_service">
         <s:complexType />
       </s:element>
       <s:element name="check_serviceResponse">
         <s:complexType>
           <s:sequence>
             <s:element minOccurs="1" maxOccurs="1" name="check_serviceResult" type="s:boolean" />
           </s:sequence>
         </s:complexType>
       </s:element>
       <s:element name="get_puantaj_data">
         <s:complexType>
           <s:sequence>
             <s:element minOccurs="0" maxOccurs="1" name="personel_sicilno" type="s:string" />
             <s:element minOccurs="1" maxOccurs="1" name="yil" type="s:int" />
             <s:element minOccurs="1" maxOccurs="1" name="ay" type="s:int" />
           </s:sequence>
         </s:complexType>
       </s:element>
       <s:element name="get_puantaj_dataResponse">
         <s:complexType>
           <s:sequence>
             <s:element minOccurs="0" maxOccurs="1" name="get_puantaj_dataResult">
               <s:complexType>
                 <s:sequence>
                   <s:any minOccurs="0" maxOccurs="unbounded" namespace="http://www.w3.org/2001/XMLSchema" processContents="lax" />
                   <s:any minOccurs="1" namespace="urn:schemas-microsoft-com:xml-diffgram-v1" processContents="lax" />
                 </s:sequence>
               </s:complexType>
             </s:element>
           </s:sequence>
         </s:complexType>
       </s:element>
       <s:element name="boolean" type="s:boolean" />
       <s:element name="DataTable" nillable="true">
         <s:complexType>
           <s:sequence>
             <s:any minOccurs="0" maxOccurs="unbounded" namespace="http://www.w3.org/2001/XMLSchema" processContents="lax" />
             <s:any minOccurs="1" namespace="urn:schemas-microsoft-com:xml-diffgram-v1" processContents="lax" />
           </s:sequence>
         </s:complexType>
       </s:element>
     </s:schema>
   </wsdl:types>
   <wsdl:message name="check_serviceSoapIn">
     <wsdl:part name="parameters" element="tns:check_service" />
   </wsdl:message>
   <wsdl:message name="check_serviceSoapOut">
     <wsdl:part name="parameters" element="tns:check_serviceResponse" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataSoapIn">
     <wsdl:part name="parameters" element="tns:get_puantaj_data" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataSoapOut">
     <wsdl:part name="parameters" element="tns:get_puantaj_dataResponse" />
   </wsdl:message>
   <wsdl:message name="check_serviceHttpGetIn" />
   <wsdl:message name="check_serviceHttpGetOut">
     <wsdl:part name="Body" element="tns:boolean" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataHttpGetIn">
     <wsdl:part name="personel_sicilno" type="s:string" />
     <wsdl:part name="yil" type="s:string" />
     <wsdl:part name="ay" type="s:string" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataHttpGetOut">
     <wsdl:part name="Body" element="tns:DataTable" />
   </wsdl:message>
   <wsdl:message name="check_serviceHttpPostIn" />
   <wsdl:message name="check_serviceHttpPostOut">
     <wsdl:part name="Body" element="tns:boolean" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataHttpPostIn">
     <wsdl:part name="personel_sicilno" type="s:string" />
     <wsdl:part name="yil" type="s:string" />
     <wsdl:part name="ay" type="s:string" />
   </wsdl:message>
   <wsdl:message name="get_puantaj_dataHttpPostOut">
     <wsdl:part name="Body" element="tns:DataTable" />
   </wsdl:message>
   <wsdl:portType name="Aktarim_ServiceSoap">
     <wsdl:operation name="check_service">
       <wsdl:input message="tns:check_serviceSoapIn" />
       <wsdl:output message="tns:check_serviceSoapOut" />
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <wsdl:input message="tns:get_puantaj_dataSoapIn" />
       <wsdl:output message="tns:get_puantaj_dataSoapOut" />
     </wsdl:operation>
   </wsdl:portType>
   <wsdl:portType name="Aktarim_ServiceHttpGet">
     <wsdl:operation name="check_service">
       <wsdl:input message="tns:check_serviceHttpGetIn" />
       <wsdl:output message="tns:check_serviceHttpGetOut" />
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <wsdl:input message="tns:get_puantaj_dataHttpGetIn" />
       <wsdl:output message="tns:get_puantaj_dataHttpGetOut" />
     </wsdl:operation>
   </wsdl:portType>
   <wsdl:portType name="Aktarim_ServiceHttpPost">
     <wsdl:operation name="check_service">
       <wsdl:input message="tns:check_serviceHttpPostIn" />
       <wsdl:output message="tns:check_serviceHttpPostOut" />
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <wsdl:input message="tns:get_puantaj_dataHttpPostIn" />
       <wsdl:output message="tns:get_puantaj_dataHttpPostOut" />
     </wsdl:operation>
   </wsdl:portType>
   <wsdl:binding name="Aktarim_ServiceSoap" type="tns:Aktarim_ServiceSoap">
     <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
     <wsdl:operation name="check_service">
       <soap:operation soapAction="http://tempuri.org/check_service" style="document" />
       <wsdl:input>
         <soap:body use="literal" />
       </wsdl:input>
       <wsdl:output>
         <soap:body use="literal" />
       </wsdl:output>
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <soap:operation soapAction="http://tempuri.org/get_puantaj_data" style="document" />
       <wsdl:input>
         <soap:body use="literal" />
       </wsdl:input>
       <wsdl:output>
         <soap:body use="literal" />
       </wsdl:output>
     </wsdl:operation>
   </wsdl:binding>
   <wsdl:binding name="Aktarim_ServiceSoap12" type="tns:Aktarim_ServiceSoap">
     <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
     <wsdl:operation name="check_service">
       <soap12:operation soapAction="http://tempuri.org/check_service" style="document" />
       <wsdl:input>
         <soap12:body use="literal" />
       </wsdl:input>
       <wsdl:output>
         <soap12:body use="literal" />
       </wsdl:output>
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <soap12:operation soapAction="http://tempuri.org/get_puantaj_data" style="document" />
       <wsdl:input>
         <soap12:body use="literal" />
       </wsdl:input>
       <wsdl:output>
         <soap12:body use="literal" />
       </wsdl:output>
     </wsdl:operation>
   </wsdl:binding>
   <wsdl:binding name="Aktarim_ServiceHttpGet" type="tns:Aktarim_ServiceHttpGet">
     <http:binding verb="GET" />
     <wsdl:operation name="check_service">
       <http:operation location="/check_service" />
       <wsdl:input>
         <http:urlEncoded />
       </wsdl:input>
       <wsdl:output>
         <mime:mimeXml part="Body" />
       </wsdl:output>
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <http:operation location="/get_puantaj_data" />
       <wsdl:input>
         <http:urlEncoded />
       </wsdl:input>
       <wsdl:output>
         <mime:mimeXml part="Body" />
       </wsdl:output>
     </wsdl:operation>
   </wsdl:binding>
   <wsdl:binding name="Aktarim_ServiceHttpPost" type="tns:Aktarim_ServiceHttpPost">
     <http:binding verb="POST" />
     <wsdl:operation name="check_service">
       <http:operation location="/check_service" />
       <wsdl:input>
         <mime:content type="application/x-www-form-urlencoded" />
       </wsdl:input>
       <wsdl:output>
         <mime:mimeXml part="Body" />
       </wsdl:output>
     </wsdl:operation>
     <wsdl:operation name="get_puantaj_data">
       <http:operation location="/get_puantaj_data" />
       <wsdl:input>
         <mime:content type="application/x-www-form-urlencoded" />
       </wsdl:input>
       <wsdl:output>
         <mime:mimeXml part="Body" />
       </wsdl:output>
     </wsdl:operation>
   </wsdl:binding>
   <wsdl:service name="Aktarim_Service">
     <wsdl:port name="Aktarim_ServiceSoap" binding="tns:Aktarim_ServiceSoap">
       <soap:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
     </wsdl:port>
     <wsdl:port name="Aktarim_ServiceSoap12" binding="tns:Aktarim_ServiceSoap12">
       <soap12:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
     </wsdl:port>
     <wsdl:port name="Aktarim_ServiceHttpGet" binding="tns:Aktarim_ServiceHttpGet">
       <http:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
     </wsdl:port>
     <wsdl:port name="Aktarim_ServiceHttpPost" binding="tns:Aktarim_ServiceHttpPost">
       <http:address location="http://192.168.10.151:7979/sap_aktarim/Aktarim_Service.asmx" />
     </wsdl:port>
   </wsdl:service>
</wsdl:definitions>

Message must have exactly one part

hi,
I have tryed to create a proxy in ECC 6.0 abap but it gives an error message:
Proxy generation terminated: Message must have exactly one part
Message no. SPRX046
Background
During proxy generation, an interface description in WSDL format is fetched from the Integration Builder or from another source and interpreted. This WSDL document must describe the whole interface correctly.
==> Display Query
==> Display WSDL Document
Diagnosis
In a WSDL document, a <message> must contain exactly one <part>, therefore:
<message name="ObtenerLicenciaRequest">
<part .../>
</message>
In this case, a <message> has no <part> or multiple <part> entries. Proxy generation cannot process such messages.
System Response
Proxy generation is terminated.*
can any one help me?
The WSDL is:
http://200.0.156.42/lme_pruebas/webservices/webservicesEmpleadores.php?wsdl
Thanks

Here is the fragment from your WSDL. You have more than one line with <part name...>:
- <message name="ObtenerLicenciaRequest">
<part name="rut_empleador" type="xsd:int" />
<part name="dv_rut_empleador" type="xsd:string" />
<part name="rut_usuario" type="xsd:int" />
<part name="dv_rut_usuario" type="xsd:string" />
<part name="password" type="xsd:string" />
<part name="fecha_proceso" type="xsd:dateTime" />
</message>
According to the error message, you must have only one of those, e.g.:
- <message name="ObtenerLicenciaRequest">
<part name="rut_empleador" type="xsd:int" />
</message>

How to Use PowerShell to Delete FIM Users That Have a Null attribute name

FIM Community Information Center Article
Wiki Page:
How to Use PowerShell to Delete FIM Users That Have a Null <attribute name>
Go to the FIM Community Information Center
Mike Crowley | MVP
My Blog --
Planet Technologies

Have you run side-by-side metrics on this?
I've run the Delete Object method and your script against similar data sets and yours appears to take a fair bit longer. I'd have to re-run in identical circumstances, a few times, to really say for sure, but my initial impression is that it will take hours
longer.
I guess the point is somewhat moot anyway, as for me the bit that generally takes longest is the actual query, rather than the deletions.
Boy how I wish I could just enter something into the FIM Portal directly that would blast out a bunch of users matching a query. One day...
FIMSpecialist.com | MCTS: FIM 2010 | Now Offering
ECMA1->ECMA2 Upgrade Services

Trailing block elements must have an id attribute

hi-
i'm getting the above error message when i'm running a dynamic client proxy and trying to use the jaxrpc with attachments to send a file.
i've took the "AttachmentsSample" code where it uploads an image and modified it to upload a textfile instead and that works. the only difference is that mine is a dynamic proxy and the sample is a stub.
this is driving me crazy. any help would be greatly appreciated.
thanks!
the following is my wsdl file:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="Sansay"
targetNamespace="http://sansay.org"
xmlns:tns="http://sansay.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:ns2="http://sansay.org/types"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>


<xsd:schema targetNamespace="http://sansay.org/types"
xmlns:tns="http://sansay.org/types"
xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns="http://www.w3.org/2001/XMLSchema">
xmlns:wsi="http://ws-i.org/profiles/basic/1.1/xsd"
<xsd:import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<xsd:complexType name="Info">
     <xsd:sequence>
     <xsd:element name="sessionId" type="string" />
<xsd:element name="table" type="string" />
     </xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Response">
     <xsd:sequence>
     <xsd:element name="retCode" type="int" />
<xsd:element name="cmdCode" type="int"/>
     <xsd:element name="msg" type="string" />
     </xsd:sequence>
</xsd:complexType>
<xsd:element name="uploadInfo" type="tns:Info"/>
<xsd:element name="uploadResponse" type="tns:Response"/>
</xsd:schema></wsdl:types>
<wsdl:message name="uploadXmlFileRequest">
<wsdl:part name="params" element="ns2:uploadInfo"/>
<wsdl:part name="xmlFile" type="xsd:hexBinary"/>
</wsdl:message>
<wsdl:message name="uploadXmlFileResponse">
<wsdl:part name="retval" element="ns2:uploadResponse"/>
</wsdl:message>
<wsdl:portType name="SansayIF">
<wsdl:operation name="uploadXmlFile">
<wsdl:input message="tns:uploadXmlFileRequest"/>
<wsdl:output message="tns:uploadXmlFileResponse"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SansayIFBinding" type="tns:SansayIF">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="uploadXmlFile">
<wsdl:input>
<mime:multipartRelated>
<mime:part>
<soap:body parts="params" use="literal"/>
</mime:part>
<mime:part>
<mime:content part= "xmlFile" type="text/plain"/>
</mime:part>
</mime:multipartRelated>
</wsdl:input>
<wsdl:output>
<mime:multipartRelated>
<mime:part>
<soap:body parts="retval" use="literal"/>
</mime:part>
</mime:multipartRelated>
</wsdl:output>

</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SansayService">
<wsdl:port name="SansayIFPort" binding="tns:SansayIFBinding">
<soap:address location="localhost"/>
</wsdl:port
></wsdl:service>
</wsdl:definitions>

Dynamic proxy does not support attachments., only stubs support sending attachments.
Dynamic proxy and DII client programming models are meant to be used for simple web services that involve only simple types in the schema.
Post your JAX-RPC related questions to [email protected] for a quicker resolution.
Send an email to [email protected] to subscribe to the alias.
Send an mail to [email protected] for a complete list of help commands.
-Arun

Exception on JaxRpc invoke trailing block elements must have an idattribute

hi all ,
I am calling a target system from a bpel process .
but while invoking i am getting the below error .
""*exception on JaxRpc invoke: trailing block elements must have an id attribute*""
my schema file is as below ,
can any one let us know the reason behind the issue .
-----------------------------------xsd file----------------------------------------
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema elementFormDefault="qualified"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:tns="http://www.viva.com.bh/vivaportal"
targetNamespace="http://www.viva.com.bh/vivaportal"
xmlns="http://www.viva.com.bh/vivaportal">
<xsd:complexType name="error">
<xsd:sequence>
<xsd:element name="errorCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="errorDescription" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="preRegistrationCheck"/>
<xsd:complexType name="preRegistrationCheckRequestType" xmlns:tns="http://www.viva.com.bh/vivaportal" >
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0" />
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0" />
<xsd:element name="source" type="xsd:string" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="preRegistrationCheckResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0" />
<xsd:element name="PIN" type="xsd:int" minOccurs="0" />
<xsd:element name="error" type="tns:error" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="prePasswordResetCheck"/>
<xsd:complexType name="prePasswordResetCheckRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="prePasswordResetCheckResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="PIN" type="xsd:int" minOccurs="0" />
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="registerUser"/>
<xsd:complexType name="registerUserRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="password" type="xsd:string" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="registerUserResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="authenticateUser"/>
<xsd:complexType name="authenticateUserRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="password" type="xsd:string" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="authenticateUserResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0" />
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="resetPassword"/>
<xsd:complexType name="resetPasswordRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="operation" type="xsd:string" minOccurs="0"/>
<xsd:element name="oldpassword" type="xsd:string" minOccurs="0"/>
<xsd:element name="password" type="xsd:string" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="resetPasswordResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="deleteUser"/>
<xsd:complexType name="deleteUserRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="deleteUserResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="preRegistrationCheck" xmlns:tns="http://www.viva.com.bh/vivaportal"
type="tns:preRegistrationCheckRequestType"/>
<xsd:element name="preRegistrationCheckResponse"
type="tns:preRegistrationCheckResponseType"/>
<xsd:element name="prePasswordResetCheck"
type="tns:prePasswordResetCheckRequestType"/>
<xsd:element name="prePasswordResetCheckResponse"
type="tns:prePasswordResetCheckResponseType"/>
<xsd:element name="registerUser" type="tns:registerUserRequestType"/>
<xsd:element name="registerUserResponse"
type="tns:registerUserResponseType"/>
<xsd:element name="authenticateUser" type="tns:authenticateUserRequestType"/>
<xsd:element name="authenticateUserResponse"
type="tns:authenticateUserResponseType"/>
<xsd:element name="resetPassword" type="tns:resetPasswordRequestType"/>
<xsd:element name="resetPasswordResponse"
type="tns:resetPasswordResponseType"/>
<xsd:element name="deleteUser" type="tns:deleteUserRequestType"/>
<xsd:element name="deleteUserResponse" type="tns:deleteUserResponseType"/>
</xsd:schema>
-----------------------------------------------end-------------------------------------------

Anybody has solution on this? I too getting similar exception when Callingl a web service with soapenc:arrayType from BPEL
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: trailing block elements must have an id attribute</summary>
</part></bindingFault>
This is what the documentation says. Any body has steps or examples
4.13.4 SOAP-Encoded Arrays Not Supported
Oracle BPEL Process Manager does not support SOAP-encoded arrays (soapenc:arrayType).
Use the following workarounds:
· Call a service with soapenc:arrayType from BPEL, but construct the XML message more manually in the BPEL code. This enables you to avoid changing or wrapping the service. However, each time you want to call that service from BPEL, you must take extra steps.
Thanks
N Reddy

Exception on JaxRpc invoke: trailing block elements must have an id attribu

Hi Friends,
Can anyone help me on this
When i invoke the webservice i am getting the following soap fault error
<messages><input><GetAccountRequest><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="in0"><in0 xmlns="" xmlns:def="http://transfer.webservice.voyager.bcgi.net" xsi:type="def:ServiceContext" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<activityTraceKey>4000004</activityTraceKey>
<errorCode>4000004</errorCode>
<errorDescription>bcgirose</errorDescription>
<successStatus>true</successStatus>
<timestamp>2007-09-10T01:34:29.525+05:30</timestamp>
<txTraceUuid>bcgirose</txTraceUuid>
<userName>bcgirose</userName>
<carrierId>62000</carrierId>
<sessionId>8</sessionId>
<userAccountName>bcgirose</userAccountName>
<userAccountPassword>bcgirose</userAccountPassword>
</in0>
</part><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="in1"><in1 xmlns="" xmlns:def="http://account.impl.transfer.webservice.voyager.bcgi.net" xsi:type="def:AccountIdentifierData" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<activityTraceKey>4000004</activityTraceKey>
<errorCode>4000004</errorCode>
<errorDescription>bcgirose</errorDescription>
<successStatus>true</successStatus>
<timestamp>2007-09-10T01:34:29.525+05:30</timestamp>
<txTraceUuid>bcgirose</txTraceUuid>
<userName>bcgirose</userName>
<accountId>4000004</accountId>
</in1>
</part></GetAccountRequest>
</input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: trailing block elements must have an id attribute</summary>
</part></remoteFault></fault></messages>

Check the schema definitions for the responses to make sure they are correct.
I have found that this 'trailing block elements must have an id attribute' occurs at runtime if an element is defined as maxOccurs="1" yet more than one of these elements are returned in the response.
Put simply, the WSDL and XSD definitions does not match service implementation. The generated proxy class bases its deserialization logic on the WSDL & XSD and if it comes across more than one element in the response, when it is only expecting one, this exception is thrown.
HTH,
Peter
http://soastation.blogspot.com

I have a Galaxy SIII and I stopped receiving visual notification for text messages. How do I correct it?

I have a Galaxy SIII and recently stopped receiving visual notification for text messages. How do I correct it?

Hmmm that's strange TopDiver. Let's get to the bottom of this. Have you checked the notification settings on the device? To verify the notification setting on the device click on menu>settings>sound>notification sound, then test device notifications.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Message: To play this movie in HD, you must have a computer with a built-in display ...

I rarely use iTunes, prefer, for obvious reasons to own physical media (which is prompting this question). But I do have an iPad 4 so I have to use it.
I bought a movie on iTunes and have downloaded it to a new brand new Windows 8 laptop. I am getting a message "To play this movie in HD, you must have a computer with a built-in display or have it connected to a display that supports HDCP."
My laptop is running a display at 1366 x 768 resolution and it is hooked up to a separate monitor using the HDMI out to the DVI input. Why am I getting this message and what is the workaround? I don't think that it's right that I have to re-buy the movie in standard definition to to watch it.
Also, as I have a 16 GB iPad, I typically don't have space available to store a 4GB movie but if I download the movie to my laptop and connect my iPad to my laptop, if I free up space will I be able to watch the movie on my iPad 4?
You can probably tell I'm not a fan of iTunes. Why does Apple insist on making everything so difficult? The iPad 4 with Retnia Display is the only Apple product I own and previously I have played this movie on my iPad.

I rarely use iTunes, prefer, for obvious reasons to own physical media (which is prompting this question). But I do have an iPad 4 so I have to use it.
I bought a movie on iTunes and have downloaded it to a new brand new Windows 8 laptop. I am getting a message "To play this movie in HD, you must have a computer with a built-in display or have it connected to a display that supports HDCP."
My laptop is running a display at 1366 x 768 resolution and it is hooked up to a separate monitor using the HDMI out to the DVI input. Why am I getting this message and what is the workaround? I don't think that it's right that I have to re-buy the movie in standard definition to to watch it.
Also, as I have a 16 GB iPad, I typically don't have space available to store a 4GB movie but if I download the movie to my laptop and connect my iPad to my laptop, if I free up space will I be able to watch the movie on my iPad 4?
You can probably tell I'm not a fan of iTunes. Why does Apple insist on making everything so difficult? The iPad 4 with Retnia Display is the only Apple product I own and previously I have played this movie on my iPad.

I want to remove my credit card from my daughter's itunes account but i can't delete the information without getting a notification that i must have the fields filled out

I want to remove my credit card from my daughter's itunes account but i can't delete the information without getting a notification that i must have the fields filled out. When she first got the ipod touch, we did not need to supply credit card information for her to set up her account. Only now that I entered it for one purchase, I can't remove it. Now my daughter has purchased over $300 in downloads the last two weeks.

You definitely can.
To remove your payment information open iTunes and go into your account. An easy way to access your account is from quick links on the store home page. After you login there will be a payment type listed with an edit button next to it. Click edit then select none under card type (next to visa, mastercard, etc).
Afterwards at the bottom of the page select done, then your card will no longer be on file. It will prompt you for a card next time you try to download something that isn't free.

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

I have an error message that says A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see

The exact and full message is:
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: https://fbstatic-a.akamaihd.net/rsrc.php/v2/yk/r/w50KHoJTfoZ.js:26
so, I have read the many other threads on this problem:
1. I just installed firefox for the first time - this happens on facebook and many other sites
2. I have reset firefox - did not fix the problem
3. I have checked all my extensions and plug ins for up to date
4. I turned off hardware acceleration
5. I tried disabling all my plug ins
6. I used to use firefox, but it started doing this and I was never able to resolve this and went to chrome.
I am using Win 7. No problem, ofr the most part, using IE or Chrome, I just wanted to try firefox again. Does it not work with win 7?

You can try to clear the Flash local storage and settings if the problem is with the Flash plugin.
*Windows Control Panel > Flash Player > Storage: Local Storage Settings
**Remove a specific domain: Local Storage Settings by site
**Remove all domains: Delete All and Delete Data
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

Hey there Alex,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
iCloud: iCloud Control Panel setup cannot be started - Apple Support
So long,
-Jason

In some downloads I get an error message as js doesn't work: a script on this page may be busy, or it may have stopped responding, script file is: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623

This is the entire message I get, but if click "stop" or "continue" nothing is fixed and the message is repeating forever...
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script:
file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623
How this can be fixed
regards
Michey

I encountered this issue with Win 7 but fixed it by doing the following: Open up AVG and then click on Tools / Advanced settings. On the bottom of the list should be AVG Security Toolbar, click on it. There should be an option to Repair the toolbar.

Notification activity's message must have a respond attribute name 'RESULT'

Similar Messages

Maybe you are looking for