Notification mailer not sending emails for PO approvals and requistions etc

I started my notification mailer
Edited it and gave the smtp server IP there..I did go into advanced settings
Than i ran a request and selected an employee defined as user in the apps for notify in the options..i saved the employee earlier with its email address
it was working fine, but for this, shud the email address has to be defined with the user or the employee that is attched to the user?
Second problem
on PO approval cases, the PO maker is not receiving emails when the PO gets approved..and the approver is not receiving email notifying him that he has received a PO for approval
Can you please tell me what am i missing?

Hi,
the diagnostic i ran was accoring to the note
Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test [ID 748421.1
It has so many output files
which one should i post
Did you get any error/warning messages? If yes, post this part only here.Regards,Hussein

Similar Messages

Notification mail not send

Hi All,
I have an issue in PR workflow.A notification mail is send to user to approve a PR,but the user says that he did not receive that notification mail.He manually goes to transaction & approve the PR & workflow gets completed.
Please let me know how to find out the cause of this problem.In my workflow log it shows workitem approved by the user.
What can be the cause that notification mail is not send.The user email id is maintained in su01.
Please help.
Thanks in advance

Hello,
You wrote:
"As he executed that step manually ,automatically the workitem got deleted from the user inbox"
This is not something that happens automatically. Is the workflow listeing out for an event which tells it that the activity represented by the step has already been done?
I assume you mean the user performed the operation that was supposed to be done via the workflow step, not that he performed the workflow step itself. If the workflow log shows that he did perform the step, then the user is mistaken.
regards
Rick Bakker
Hanabi Technology

Email Activity not sending emails for one domain - 10.1.3.4 MLR#10

I have four domains in my BPELConsole. My evey BPEL process has CatchAll block and I'm sending email notification with fault details.
Somehow, my BPEL processes from three domains are sending emails properly but myDomain4 is not sending emails even after successful execution of Email Activity.
1) I have compared the Email code with processes in other domain and they are similar.
2) orabpel.bpelnotification is not logging any error for this notification.
3) I never received any email from this domain. There was no error in logs during domain creation.
3) I am getting following in logs that sending email was successfully executed. It received Notification ID too
<2010-09-22 07:24:44,530> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=4
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 12834c63e81c20d0:-71064af1:42b35e5dab4:-7283
Please help/hint for any possible solution/debugging.

sometimes i have seen emails not being sent when the async invokes takes more time than the overall completion.. And yes, we might still see successful log as emails sent. FYI - I am with 10.1.3.3.1 MLR #8.
did you try just creating a email only process? switch off all other processes in that domain and initiate only this email process to see what happens..

Timesheet notifications are not sending emails

I have Project Server 2013 and Sharepoint 2013 on the same server. I have project sites where we have set up a "workflow" and notifications will send out emails just fine...however, I cannot get timesheet functionality to send out emails. So,
when a test user account we have created submits a timesheet to me (I am the timesheet manager)...I get no email notification that a timesheet has been sent to me...even though when I submit the timesheet (as the test user account) a window pops up with me
as the timesheet approver. I know the smtp relay is set up correctly because workflow from a site we have created in sharepoint does send emails out notifying users that they are next up for commenting on a document.

jb61264,
The Timesheets in Project Server 2013 do not have a functionality of sending emails for submitted timesheets. This is by design.
The only way to do it is to use a thirdparty workflow software like Nintex, or write your own even handler or use data driven alerts in SQL Server 2012.
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com

Restrict Broadcaster to not send Emails for certain Queries

Hi,
is there any possibility to restrict a user on sending Emails for certain queries?
With the existing authorizaion objects S_RS_BCS and S_RS_ADMWB it is not possible to do so.
He will need S_RS_COMP to be able to open the Query.
With S_OC_SEND I just be able to take his ability to send Emails, but the user will need this option.
Does anybody has an idea?
Thanks and best regards
Sascha

The Workspace User role ony controls whether the user is allowed to use Workspace or not. A user will only be able to Start a Process in Workspace if they a) are a Workspace User and b) the process security settings allow them to by having the INVOKE_PERM enabled. The INVOKE_PERM setting is usually controlled from within Application Management area in the Adminui and would be set per process to define who is allowed to invoke (start) that service (process). Take a look at your processes and see if they are defined for the All Principals group having the INVOKE_PERM as this is one way in which everybody can start a process.
I'm unfamiliar with the Services User role but if it sounds like maybe this has the INVOKE_PERM so this could be why all your users can start processes, presuming they are all in this role.
But however the INVOKE_PERM priviledge is being granted, it is not via the Workspace User role.
Hope that helps.
Jon

ESB Notification channel not sending emails when error is not retryable

Hi everyone,
I'm facing a problem on a production environment, two Oracle SOA suite 10.1.3.3 machines in cluster, operating system Linux Unbreakable.
I've succesfully set up the notification channel for ESB and it is correctly sending mail.
Today after some errors ESB did not sent any mail and there is not a single error in the log files, both in opmn/logs and j2ee/OC4J_.../log/...
At the same time some retryable error has been seen, and for in this case the mail was correctly sent, so the only clue I have is that for some reason there is a configuration that tells the server not to send mails for not retryable errors... Am I right? Is there a chance to change this behaviour?
Thank's for your attention,
Lisa

Hi Lisa,
>>
I'm facing a problem on a production environment, two Oracle SOA suite 10.1.3.3 machines in cluster, operating system Linux Unbreakable.
I've succesfully set up the notification channel for ESB and it is correctly sending mail.
Today after some errors ESB did not sent any mail and there is not a single error in the log files, both in opmn/logs and j2ee/OC4J_.../log/...
At the same time some retryable error has been seen, and for in this case the mail was correctly sent, so the only clue I have is that for some reason there is a configuration that tells the server not to send mails for not retryable errors... Am I right? Is there a chance to change this behaviour?
>>
I'm also using 10.1.3.3 MLR#17 in cluster, OS: AIX 5.3L and didn't faced your behaviour before.
What exactly errors do you facing? ESB email notification works not for all errors.
For example: failure at JCA layer (FTP adapter that poll for XML files and receive a text file) - didn't produce any notification (you must manually configure rejection handler for this, if you need more than files at $OH/j2ee/.../jca/...) and this's expected behaviour.
Best Regards,
Mikhail.

Campaign execution not send emails for contact persons

Hi All!
I'm facing a problem with Campaigns (communication medium - E-mail): Those are the steps i'm following:
1.Start the campaign, and on the "campaign: Schedule job" screen, i choose "immediately". If i look at the campaign details after scheduled the job, the status is now "job started".
2. To check wich mails were sent, I also had a look at the business partner account that belongs to the target group used. On the "Interaction History" block, there is a line: "Outgoing Email" - on the details of this outgoing email I can see the "To" (Receivers). And here, I have emails from the business Partner contact persons and from the business partner itself (the email that is on the header level of the business partner account, on the "main address and communication data" area). So far so good. That's exactly what i need but,
3. If i go to the tcode, i only have a send request for the business partner itself and none for his contact persons (although those emails are on the "To" line for the interaction history).
I'm working on the Webclient UI, of the CRM 7.0
Does someone knows why the emails are not being sent also for the contact persons?
Thanks in advance.
Inê

I have achieved this by implementing the BADI : CRM_MKT_ADR_SEARCH
In this BADI's method : CHANGE_SEARCH_RESULTS you can modify the data which is being sent back to system for campaign execution.
NOTE: I am using Address Independent Communication Data of Business Partner
Below is my sample code for contact person email :
data: wa_bp_cp_channel type crmt_bp_cp_channel.
field-symbols: <fs_bp_cp_channel> type crmt_bp_cp_channel.
types: begin of ty_cp,
          partner type but000-partner,
          address type but000-addrcomm,
         end of ty_cp,
         begin of ty_bpcp,
           partner1 type but051-partner1,
           partner2 type but051-partner2,
         end of ty_bpcp.
data: it_cp type table of ty_cp,
        wa_cp type ty_cp.
data: it_bpcp type table of ty_bpcp,
        wa_bpcp type ty_bpcp.
data: it_bp type table of ty_cp,
        wa_bp type ty_cp.
read table ct_bp_cp_channel into wa_bp_cp_channel with key com_channel = '03'.
if sy-subrc = 0.
    select partner addrcomm
      from but000
        into table it_cp
          for all entries in ct_bp_cp_channel
            where
              partner = ct_bp_cp_channel-cp_number.
    select partner1 partner2
      from but051
        into table it_bpcp
          for all entries in ct_bp_cp_channel
            where
              partner1 = ct_bp_cp_channel-bp_number.
    if it_bpcp[] is not initial.
      select partner addrcomm
        from but000
          into table it_bp
            for all entries in it_bpcp
              where
                partner = it_bpcp-partner2.
    endif.
    sort it_cp by partner.
    sort it_bp by partner.
    sort it_bpcp by partner1.
    loop at ct_bp_cp_channel assigning <fs_bp_cp_channel> where com_channel = '03'.
      read table it_cp into wa_cp with key partner = <fs_bp_cp_channel>-cp_number binary search.
      if sy-subrc = 0.
        <fs_bp_cp_channel>-addrnumber = wa_cp-address.
        clear <fs_bp_cp_channel>-bp_number.
        clear <fs_bp_cp_channel>-bp_guid.
      else.
        read table it_bpcp into wa_bpcp with key partner1 = <fs_bp_cp_channel>-bp_number binary search.
        if sy-subrc = 0.
          read table it_bp into wa_bp with key partner = wa_bpcp-partner2 binary search.
          if sy-subrc = 0.
            <fs_bp_cp_channel>-addrnumber = wa_bp-address.
            clear <fs_bp_cp_channel>-bp_number.
            clear <fs_bp_cp_channel>-bp_guid.
          endif.
        endif.
      endif.
    endloop.
endif.

Tiger Mail Not Sending Emails

It USED to work ... but the mail feature for Tiger is no longer sending emails (but it DOES recieve them).
The Error Message is as follows:
This message could not be delivered and will remain in your Outbox until it can be delivered.
The connection to the server "smtp.mac.com" on port 25 timed out.
Can someone help me?
Cheers,
ne@nher@.

Who is your internet service provider (ISP) use for connecting to the internet?
This error message indicates your ISP is blocking the use of SMTP servers outside of their network on Port 25. Since using the .Mac SMTP server on Port 25 worked previously, this may be a recent change implemented by your ISP.
Within the last year, SBC implemented such a change and conveniently neglected to inform their customers beforehand so your ISP may have done the same.
Something to try.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below.
At the Server Port field, enter 587 in place of 25 in the space provided. When finished, select OK to save the changed setting.
Check if this resolves the problem.
If not and you are also accessing an email account and SMTP server provided by your ISP, select/use your ISP's SMTP server to send mail with your .Mac account which is done under the Account Information tab for the account preferences via the pop-up menu next to the SMTP server currently selected for the account.
This is invisible to all recipients and should allow you to send mail with your .Mac account while calling your ISP to check on any recent changes implemented on the use of an SMTP server not provided by your ISP and outside of their network.

Apple not send email for reset password

My Apple was closed after several attempts to open the account iCloud and then restore it worked for the password and I do not send me e-mail for reset password plas halp me
<Email Edited By Host>

Hello 3888,
The article linked below details what to do should you not recieve your reset email.
If you didn't receive your Apple ID verification or reset email
http://support.apple.com/kb/TS5404
Cheers,
Allen

ATT Uverse and Mac Mail not sending emails!

I've read through all the other discussion topics pertaining to this and tried them all, adding and deleting accounts, setting up my account preferences according to the Uverse help page but nothing seems to work. I can receive emails fine but sending emails doesn't work any more. We just had Uverse installed less than 24 hours ago and ATT tech support won't help me out unless I pay $50! Are you kidding me? Because Mac Mail is a 3rd party app they won't help me solve this annoying issue, they've told me to just use their web mail program instead. I'm not sure what to do at this point, does anyone have some info that may help me out here?

AT&T U-Verse (uverse), as of July 2014, requires that you verify your non-AT&T mail accounts before they allow you to send outgoing non-AT&T mail.
Here's how to verify your non-AT&T mail accounts and link them to your AT&T U-verse account
https://discussions.apple.com/message/22291865
Log into your AT&T U-verse webmail att.net email account (e.g. Yahoo mail)
> click the gear at upper right of screen next to your name
Navigate to Settings > Accounts > Add
Add your non-AT&T mail accounts/ Enter info they require
U-verse will send a verification email to those mail accounts.
After you reply and verify your identity, you will be able to send outgoing email for those accounts via Mail, so long
as you have Mail configured.

How to create a notification subscription to send email for all alerts except exchange objects related alerts.

Hi Team,
We have notification subscription configured currently, which will send email notification for Central team for all alerts generated in SCOM. Recently we got complaint from messaging(exchange server) team, that the exchange related email notifications are
going to other teams.
How shall we exclude "All exchange 2010 entities" group from current subscription.
Thanks,
Dinesh
Thanks & Regards, Dinesh

Hi
There is no functinality to exclude objects in notifications. You would have to select everything that you want to be alerted on. Either you select all Groups, classes or split up the subscription per "Technology" like SQL, IIS etc. and select
the corresponding MPs to be alerted on like all rules and Monitors.
Probably selecting the classes would be the best option
https://social.technet.microsoft.com/Forums/systemcenter/en-US/7e8a5d4a-1727-4448-a2d8-85950645e01a/notification-subscription-by-management-pack
This might help also
http://blogs.technet.com/b/kevinholman/archive/2008/06/26/using-opsmgr-notifications-in-the-real-world-part-1.aspx and
http://myitforum.com/myitforumwp/2014/03/04/system-center-operations-manager-2012-r2-generating-notifications-by-management-pack/
Cheers,
Stefan
Blog: http://stefanroth.net If my post helped you, please take a moment to vote as helpful and\or mark as an answer

Mail not sending email

I'm having some problems with sending email through Mail. It sends fine when I use .mac on the apple website, but when I use Mail it won't send it at all. I can still receive mail, but can't send it. I've been using Mail for years and have never had this problem. Any ideas?

Problem solved... I just restarted the computer... Should've tried that first.

SMTP Adapter: Not sending email for one of the applications

I have a weird problem. I have three applications that need to send emails. Two of them are sending emails but the third one is not. Practically everything in the third is a copy-paste from the second application. Uses the same handler and so forth. In reality
there is no reason there should be any failure.
How can I track if my email request was sent to the smtp server in the first place and also why this one is failing? Further, anything on the smtp server that could help tracing this message. May be it is failing there?

The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent.
-Are you using Static- or Dynamic Port?
Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
instances in the Group Hub.
If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
Morten la Cour

Apple Mail not sending email something about port 25

I am a brand new iMac user. I am unable to use the native iMac mail. When I try to send a message it says something about not being able to send mail...port 25. Any ideas. Is there some kind of set up I need to do? I have a high speed Internet connection and it is working just fine.
Please help.
-Brett

This is a common issue between your mail provider and your internet provider. It sounds like your ISP isn't letting you use port 25 to send outgoing mail, which is quite common now, since some internet worms use that port.
Check with your mail provider to see if you can use an alternate port for SMTP (outgoing mail). One possible port is 587. You can set this in Mail Preferences, under Accounts, then Server Settings.
Matt

Mail not sending email with digital signature

Hello helpers,
What's the deal with Mail and digital signatures? I could never get the application to work with my Versign class 1 digital signature in Tiger and now in Leopard. Keep getting error 1035. That's what led mr to Thunderbird and I got Leopard hoping to resolve this issue. Keychain seems as if it's a weirdo in its simplicity and where I believe the problem lies. my digital certificate resides on the system but is not in the my certificate category. However, when I select it in system, afterwards it shows up in my certificate category. If I close Keychain and reopen it, my certificate is empty.
I like Mail. However, it's important to me to use my digital certificate in signing my email. I believe I must have done something wrong in the installation of the certificate and I can't imaging what. Why can't Mail accept digital certificate directly like other email application rather than go through a third party...Keychain. Mail help did not help. Any workable solution would be appreciated. Thanks
Ralston

Just discovered that I have an icloud account and a .me account in my accounts inbox. Do I have a problem with migration to icloud?

Notification mailer not sending emails for PO approvals and requistions etc

Similar Messages

Maybe you are looking for