Notification Wait with interrupt issue from screen flow

I have a process with notification wait with interrupt activity. I am sending notification wait from a screen flow to abort another instance. The instance to be notified has returned to an interactive activity after an exception. For some reason, the notification wait does not happen immediately. It takes about 5 minutes for it to take effect. Any thoughts.

There is a setting in the wait activity that will process the notification immediate, not queue up the notification. 5 minutes seems a long time, even for it being queued up. Normally this setting defaults so it doesn't queue up the notifications. Perhaps this was turned off in your case.
Right-click on the notification wait, clink on properties->runtime. This settings is located there.
We have seen issues with different implementations of the queue and topic JMS devices, especially using Webshpere. Unless you're doing something special, the default JMS devices in WebLogic works fine. If your using some other app server or JMS device, then that may be the problem.
HTH,
Mark

Similar Messages

  • Notification Wait with Interruption

    Hi All,
    I have two process one is Process A and another is Process B. In Process A I have an interactive activity and after that I have unconditional transition to an automatic activity. Again From Interactive activity I have one conditional transition to the Notification Wait activity which will be false always. Again from Notification Wait activity I have an unconditional transition to Interactive activity.
    Now In process B I want to notify the Process A, I need to mention here I do not have any instance pending in Notification Wait activity of process A.
    In simple language I want to shift my control from process B's automatic activity to Process A Notification wait taciturnity. If I can notify the activity I can traverse to Interactive activity in Process A as I have unconditional transition to Interactive activity.
    Can this be possible if so how and Can I make use of Notification Wait activity with Allow Interruption property.
    Any help will be appreciated.
    Bibhu
    Edited by: Bibhuti Bhusan on Oct 14, 2010 11:56 PM

    Sorry - probably just me but I'm completely lost.
    Sometimes it's helpful to describe your use case before drilling into your solution. A lot of times we can recommend a better way to do things if we understand the underlying need you have.
    Here's where I'm lost. I think you're trying to send a notification to an instance in another process. I have undoubtedly misunderstood you but I think that there are two things missing in your process that is being notified:
    1. the work item instance in the process being notified is not and will never be in a Message Wait activity and
    2. the process being notified does not have a Message Wait activity that has its "Interupt" property set.
    If I understand you correctly and if both of these two things are true, it will be impossible for you to send a notification into this process.
    Dan

  • Problem with reading data from screen and inserting in table

    hi ther,
    im new to abap-webdyn pro. can anyone suggest how to read data from screen and insert into table when press 'ADD' button.
    i done screen gui , table creation but problems with action. what the content of acton add.
    is ther any link that helps me or tut??
    thankx in advance!
    regards

    Hi,
    Create a context node for the screen fields for which you want to enter the values with cardinality 1.1.....
    Now in the layout of your view bind the screen input fields to that context node(attributes) to the value property of the input fields...
    Now in the action of ADD button....
    --> go the wizard and select the read node button and select the node which you have created it generates the auto code for you.....
    for example if the node is contains aone attribute like MATNR
    reading the node from wizard will generate the code as....
    DATA lo_nd_matnr TYPE REF TO if_wd_context_node.
      DATA lo_el_matnr TYPE REF TO if_wd_context_element.
      DATA ls_matnr TYPE wd_this->element_matnr.
      DATA lv_matnr TYPE wd_this->element_matnr-matnr.
    * navigate from <CONTEXT> to <MATNR> via lead selection
      lo_nd_matnr = wd_context->get_child_node( name = wd_this->wdctx_matnr ).
    * @TODO handle non existant child
    * IF lo_nd_matnr IS INITIAL.
    * ENDIF.
    * get element via lead selection
      lo_el_matnr = lo_nd_matnr->get_element( ).
    * @TODO handle not set lead selection
      IF lo_el_matnr IS INITIAL.
      ENDIF.
    * get single attribute
      lo_el_matnr->get_attribute(
        EXPORTING
          name =  `MATNR`
        IMPORTING
          value = lv_matnr ).
    here the variable lv_matnr will contain the entered value......
    now you can use this value for further process.
    Thanks,
    Shailaja Ainala.

  • NO HELP WITH ROUTING ISSUES FROM VERIZON

    Spend 2 hours with technical support to no avail. Have routing issues where I can’t get from my FIOS residential account to remote web site abroad. Trace route fails at so-0-0-0.XT1.AMS2.ALTER.NET [146.188.14.209]. FIOS technical support is incapable of doing any troubleshooting beyond basic customer premises equipment, refusing to escalate the case to network engineering team. I was basically told by FIOS tech support supervisor {edited for privacy} that this is not Verizon’s problem and no help will be provided. What is even more frustrating that Verizon agents are not capable of receiving emails from customers with details such as trace route.
    Is there anyone at Verizon monitoring this and able to help? Just in case, ticket number that I have with Verizon is {edited for privacy}
    Here is trace route details.
    tracert 212.44.136.226
    Tracing route to brserv.bridgetour.ru [212.44.136.226]
    over a maximum of 30 hops:
      1     1 ms    <1 ms     1 ms  Wireless_Broadband_Router.home [192.168.1.1]
      2    12 ms     9 ms     9 ms  L100.BSTNMA-VFTTP-71.verizon-gni.net [98.118.28
    1]
      3    16 ms    19 ms    19 ms  G0-6-4-1.BSTNMA-LCR-21.verizon-gni.net [130.81.
    75.132]
      4    45 ms    15 ms     8 ms  ae3-0.BOS-BB-RTR1.verizon-gni.net [130.81.151.6
      5    19 ms    19 ms    19 ms  0.xe-3-2-0.IL1.NYC9.ALTER.NET [152.63.26.81]
      6    21 ms    19 ms    19 ms  0.ge-1-2-0.IL1.NYC12.ALTER.NET [152.63.26.86]
      7   107 ms   108 ms   107 ms  so-0-0-0.XT1.AMS2.ALTER.NET [146.188.14.209]
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11     *        *        *     Request timed out.
     12     *        *        *     Request timed out.
     13     *        *        *     Request timed out.

    BT help aren't always that helpful, but BT engineers claim that it is a BT sales issue and nothing to do with them seems a bit extreme.
    Are you sure your daily speed is 8Mbits, not 8Mbytes?  How are you measuring this?  Is it the number coming from the BT speedtest?
    If it really is 8Mb, then I think it's worth checking with the mods;  at: http://bt.custhelp.com/app/contact_email/c/4951 .  But be aware they take 3 working days to reply: sometimes more if busy. 

  • Fed up with q10 issues from 10.3 restarting and wiping phone

    I have been a bberry user for over 7 years and have never been this close to switching OS's
    I updated to 10.3 on 10 days ago. All was going well until on the saturday my phone ran out of battery. Normal issue I thought until when i put the charged battery back in (great blackberry extra battery) it reset everything and deleted all my apps and data.
    I have since wiped the phone and tried to put some of my data back on to no avail. every time it restarts it it wipes the data off the phone.
    I have done a factory reset and tried reinstalling apps without my data and when i power down the phone it wipes everything.
    I am very frusterated and need a functional phone.

     I have the exact same issue - and I am not even setting up my phone anymore since everytime it just gets wiped anyway!!! I am HATING this at the moment.
    Supposed to be using it for work - but you cannot operate like this. It is MORE than annoying. 
    There was a new update this morning - I installed it and hoped for the best - restarted and yet again - it wiped everything!!!! 
    How are we to fix this?? 

  • The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

    The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

    Probably a setting. Look at the manual.
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • When I try to access my iTunes Store from my iPhone 5 it opens with a blank white screen. Help!

    I've tried for several days to open my iTunes Store on my iPhone. Every time it opens, but with a blank white screen.

    Hi Upswife,
    When troubleshooting iTunes Store connection issues, the following articles provide the best information:
    First, try signing out of your account in Settings > iTunes & App Store. Once signed out, go ahead and sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    If the above did not resolve your issue, refer to the following:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    If you haven't been able to connect to the iTunes Store:
    - Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
    - Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
    - Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
    - Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
    - Try resetting (turning off and then on again) your Wi-Fi router
    - If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connectionsoriOS: Troubleshooting Wi-Fi networks and connections.
    Thanks,
    Matt M.

  • Issues with lines across the screen, as well as freezing

    Issues with lines across the screen, as well as freezing
    Hello all
    Got an iMac since January 2008 and I do like it a lot, even though it has some issues:
    -- It displays (quite often) lines partially across the screen
    -- Lines appear as well when opening applications or when menus come up
    -- The system freezes more than I like to admit (more than my Windows/Ubuntu box)
    I don't know if the freezing has to do with the lines that are shown on my screen. But I assume that both issues relate to some video card problem. I can't be sure - but that's what I assume from living with this issue day to day.
    The line on the desktop (most of the time it is there before login) I can always get rid of by changing the display resolution to something else and then changing it back. Normally the line is gone, or, reappears on a different spot on the desktop. But repeating the procedure removes the line.
    However, this does not mean that the lines are not showing up again when launching apps or displaying menus!
    And since those lines appear to happen randomly, I think it's safe to assume that we're not talking dead pixels here, either...
    About the freezing:
    My iMac freezes sometimes when I move the mouse around, when switching desktops using "spaces" or when the zoom function of the Dock kicks in. Sometimes the screen goes completely black, sometimes completely white. The mouse, however, always works. But the system requires a reboot.
    Again, this happens too often to feel comfy about it.
    With my little knowledge of Mac troubleshooting I assume that there's something wrong with the ATI card that's built into my Mac. On the other hand, some people say that they started getting similar issues after updating their OS to Leopard. Again other people say that such issues stem from an ATI revision that is too old and the Mac should get a new ATI card. And how would that work? Isn't that an "all-in-one" machine with everything soldered onto the mainboard?
    So, any help in this matter is greatly appreciated...
    Cheers,
    Rainer

    Here are a few screen photos I've taken (not screenshots, as the lines are not visible when taking screenshots. I used my digicam to snap those...).
    Here's the link to those screen photos displaying some of the many lines I keep having:
    http://picasaweb.google.com/rainer.rohde/NewAlbum62508115AM
    Needless to say, as I typed this message here, I had a nice line going across my Safari window..
    Cheers,
    Rainer

  • I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

    Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
    I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
    Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
    I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
    If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
    I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
    I am using 2Wire Gateway modem/router from AT&T on b/g network.
    I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
    I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
    Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
    Please.. does anyone have a clue why this is happening?

    You're definitely not the only one.  I have the same issue.  I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked.  They finally sent me a replacement laptop.  I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying.  I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
    My router is a Linksys E2000.  I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

  • Switching iTunes (older version) from an old latptop with mechanical issues to iTunes on a new computer.  The hard drive, issue free, was placed in external drive enclosure.  How do I recover iTunes?

    I'm trying to moves iTunes (older version) from an old latptop with mechanical issues (non working screen, keyboard, and battery) to iTunes on a new computer.  The hard drive, issue free, was placed in external drive enclosure.  This was a cost effective way instead of dumping lots of money in an outdated old laptop while I can invest it into a new laptop.  How do I recover iTunes?
    I'm switching from a 3G phone to a blank 4GS in the process.  I would like to have everything that was on my 3G phone and iTunes on my new phone and computer.
    Thanks

    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

  • Resume from Screen Saver Issues

    Hey All,
    Well...migrated from Leopard to Snow Leopard with minimal issues but
    In Leopard, after waking from screen saver, a box would prompt for a password. I've gotten SL to do this, but there is no way to switch user.
    I have multiple users and i'm unable to switch users from SL.
    Any ideas??
    Kayle

    Hey All,
    Well...migrated from Leopard to Snow Leopard with minimal issues but
    In Leopard, after waking from screen saver, a box would prompt for a password. I've gotten SL to do this, but there is no way to switch user.
    I have multiple users and i'm unable to switch users from SL.
    Any ideas??
    Kayle

  • Dear All Has anyone found a break through with the issue of Connect to itunes to use push notifications

    Dear All Has anyone found a break through with the issue of Connect to itunes to use push notifications

    Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.

  • Hi I have iPhone 4 crack screen how much to replacement with anther one from apple store ?

    Hi I have iPhone 4 crack screen how much to replacement with anther one from apple store ?

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

  • My Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

    my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

    Have you just tried repairing with Disk Utility?
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • HT5455 Is It normal that my premium category 15" retina MBPs screen has ghosting issues, then I get declined from screen replacement?

    Is It normal that my premium category 15" retina MBPs screen has ghosting issues, and I get declined from screen replacement?
    I have purchased this hardware in Budapest for approximately 3000 usd. I was a bit shocked to see screen ghosting after a few days of use. The problem was getting worse but because I am a design consultant working mainly on my Mac I couldnt take a week off to leave It at an Apple service station.
    Last week I was surprised to receive the information from the local Apple repair shop in Germany that my retina MBP that I bought 13 months ago was declined from screen replacement by Apple.
    Considering the price of the product I find It unacceptable that I need to work on a defective product and see shadows every time I leave an Illustrator or InDesign window open for a short period of time.
    Is there any way to resolve this issue? I wouldnt like to pay another 800 dollars just to replace a component on my defective Apple product.

    Contact Apple Support directly.  In Germany the Expresslane or this number
    0800 6645 451 will allow you to speak directly to someone from Apple.    Explain your situation.   Mind you, AppleCare and issues with Apple products like this have to occur without any user accidents or user installed parts to ensure that Apple will cover you.  If there was a user accident or installed part, you may be turned down.  If you have the original Apple parts, and did the installation yourself, replace it with the original parts very carefully following the directions on http://www.ifixit.com/ unless you can afford an authorized service provider to do it for you.  Since we don't speak for Apple here, being end users like yourself, that's why I say "may", as I've seen Apple handle these things on a case by case basis.  So hopefully you don't have any obvious damage that looks like it is user caused.   Good luck!

Maybe you are looking for