Notification: when calling a person, who is already talking on the other line

Hello,
On my previous phone, there was a sound notification, when you were calling somebody, who is currently already talking on the other line. Therefore you knew, your call is waiting on the other line.
Is there a possibility to enable this on iPhone 5s?
Thanks, reg,
MG

MGMGMGMGMG wrote:
I don't understand though why this feature is not available on the phone, if it is available by the communication system.
In addition, why there's always a question of "why you need this". I wouldn't ask if I wouldn't find it helpful.
Because it's not something the phone can do. The carrier has to do it.
And, if you post on a public forum, expect people to ask questions and make comments. If you explained why it makes a difference, people might also be able to suggest alternatives. However, it seems you may just want to complain, not actually get help. In that case, this is the wrong venue.
Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback
Best of luck.

Similar Messages

Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouT

Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight

This is a wireless carrier issue. The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
Contact your wireless carrier about your call quality issue.

TS3406 I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

Hi there MitchR12,
You may find the troubleshooting steps in the article below helpful.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
-Griff W.

%CALL_CONTROL-6-CALL_LOOP: The incoming call has a global identfier already present in the list of currently handled calls.

000049: Oct 26 14:51:04.181: %VOICE_IEC-3-GW: H323: Internal Error (H323 Interwo
rking Error): IEC=1.1.127.5.21.0 on callID 261 GUID=80316352D0FE011E02002302A5CC
B8F9
000050: Oct 26 15:24:50.315: %CALL_CONTROL-6-CALL_LOOP: The incoming call has a
global identfier already present in the list of currently handled calls. It is b
eing refused.
000051: Oct 26 15:24:50.315: %VOICE_IEC-3-GW: CCAPI: Internal Error (Incoming lo
op): IEC=1.1.180.1.28.0 on callID 0
000052: Oct 26 15:24:50.315: %VOICE_IEC-3-GW: H323: Internal Error (H323 Interwo
rking Error): IEC=1.1.127.5.21.0 on callID 363
According to Cisco it says:
It means that the voice gateway has detected a loop in the call route
What debugs can I do to track this problem down.
All dial peers are like this. They are all voip dial peers with different destination-patterns and different session target IP addresses. No PSTN dial peers at all.
dial-peer voice 30000 voip
huntstop
destination-pattern 3[01]...
session target ipv4:192.168.99.4
dtmf-relay h245-signal
ip qos dscp cs5 media

Q: How long has this system been in place - is it a new system, or is this something that just started on a system that has been in place for awhile?
A: My customer says to me that this system has been in place for nearly a year and the problem started only a couple of days ago.
Q: If so were there any changes to the infrastructure, or the dialplan in particular?
A: Again this is the first question I asked and he said “NO CHANGES”. But that is what most customer say – right?
Q: Have you seen this occur in the past in the logs? If so how often do you see it?
A: Started on 26th Oct 2010. Since the problem started the router has been reloaded and the problem is still there. It is very intermittent and I have to do the debug when I get the problem.
Q: Have you tried to establish what is causing these: H323: Internal Error (H323 Interworking Error) ?
A: Not sure how to troubleshoot this. The explanation of this message on CCO is not that great.

No question, I just wanna say thanks to the person who discovered how to change the correct dns to use FaceTime. The 8.8.8.8. Really work. Genius. Thanks again.

No question, I just wanna say thanks to the person who discovered how to change the correct dns to use FaceTime. The 8.8.8.8. Really work. Genius. Thanks again.

solved

I can hear my incoming calls but the person on the other line can't hear me. How can I solve this problem?

It's been more than a week since I had this problem.
As I said I can mostly hear the person on the line but the person on the other line cannot hear my voice.
How can I fixed this problem? Do I have to go to the apple store? My warranty has expired and I can't get to the apple store easily becasue it's too far from where I live:( Please help.

Does your iPhone say headphones when you adjust the volume, even when they are disconnected?
You can try disconnecting and reconnecting the headphones 5-6 times or restoring the iPhone.
If that doesn't do it, you can setup service for the iPhone online or have a Genius take a look at it.

I have a Verzion iPhone 4s with iOS 7 installed on it and the friend my friends dose not seem like it is working, and it is when it is trying to find a certain person, it says location unavaiable, and the other person with the other iphone it friend my fr

I have a Verzion iPhone 4s with iOS 7 installed on it and the friend my friends dose not seem like it is working, and it is when it is trying to find a certain person, it says location unavaiable, and the other person with the other iphone it friend my friend is on in locations service and on the verzion iPhone it is on

Little hard to understand what you are asking. Let me guess that this not an Iphone4S issue. Its a problem with your service provider. Contact them.

How come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line

how come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line.

My carrier is Sprint. But I actually have checked with others and theirs work fine.

How can I make Adobe Acrobat Pro give a warning to another person who is trying to open the same file I currently have open?

How can I make Adobe Acrobat Pro give a warning to another person who is trying to open the same file I currently have open?

You can't.

Hi Guys, suddenly I am not able to hear on my iphone 3GS whenever I receive a incoming call(it's very hard to hear wat the other people us saying)

Hi Guys, suddenly I am not able to hear on my iphone 3GS whenever I receive a incoming call(it's very hard to hear wat the other people is saying)

I had my GENIUS appointment today. They did a couple of tests by plugging my iPhone into a macbook and both came back without showing problem. However as the genius was working with my phone he ran into the same problem with 3G and I had taken some screen shots showing full signal strength but unable to make a call, failure to send mms, and internet unable to connect, so he switched out my phone for a new one as I am still under warranty for another 3 months.
Make sure you backup your data and restore your phone as a new phone before going in to see a Genius, otherwise they may choose to try that process first and do some diagnotistic tests before being able to switch it out, and that can take up to 4 days.
Best guess by the Genius was that it was a hardware problem with the internal cellular antenna. He also recommended I get a new (free) SIM card from AT&T which I did (kiosk was in same mall)
So bottom line...if your 3G is messed up, make an appointment with Apple Genius. Thanks to all who tried to help, but mostly thank you apple Genius for great customer service.

TS1702 I'm having trouble updating my apps. the message that appears is that the security code of credit card is invalid. already talked to the operator of the card and everything is ok.

I'm having trouble updating my apps. the message that appears is that the security code of credit card is invalid. already talked to the operator of the card and everything is ok.

The address on the billing statement from the credit card company must match the information that you have filled in on the fields in iTunes when you set up the account. In other words you cannot abbreviate in iTunes if the information for you billing address is not abbreviated on the statement that you get in the mail. If the statement lists your street as "Street" and you type in "St." - that can cause issues. If that's not the problem, sign out of your ID, restart the iPad and sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again.

Is it possible to load an IPAD from two different ITune accounts? When I try it says it'll delete all the other account first.

Is it possible to load an IPAD from two different ITune accounts? When I try it says it'll delete all the other account first.

This is correct.
Ipad wilol sync itunes content and pics with one and only one computer at a time. Syncing to another will erase the current content.

I can barely hear the person on the other line, i tried resetting but it didnt work

I can barely hear the person on the other line, i tried resetting as suggested by other users but it didn't work. Help!!

Do you have a screen protector covering the speaker?
Have you powered the iPhone off and back on?

I can hear the voice in normal call but the other line can't hear me

i can hear the voice on the other line but the other line can't hear me

User troubleshooting is restart, reset, restore from backup, restore as new. Since calling is a carrier function, you can check with them about your account. If all of that is good, then contact Apple or your Authorized Apple Service Provider to have the hardware checked.

When capturing video; how do I get rid of the green lines at the bottom of the frame?

When capturing video; How do I get rid of the green lines at the bottom of the frame?

s.haider
You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
And, the general drill for all users of Premiere Elements 8.0
a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
b. Are you working from the 8.0.1 Update version of the program?
Please consider.
We will be watching for the outcome.
Thank you.
ATR

Notification: when calling a person, who is already talking on the other line

Similar Messages

Maybe you are looking for