Nqserror 27005 Unresolved column error

I'm using the default RPD provided with Oracle BI Apps (OracleBIAnalyticsApps.rpd) and default catalog EnterpriseBusinessAnalytics. I am getting the following error in the Service - CRM Activities subject area:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27005] Unresolved column: "- Activity Facts"."# of Activities". (HY000)
I have
1) Checked the linking from presentation layer to physical layer and the column is properly linked in all layers
2) Checked all the logical joins with other tables and all columns involved in the joins are present.
When i run the dashboard Service Employee --> My To Do List, the "Call Back Queue" report fails with the above error. However, when i create the same report in Answers by adding the same columns along with "# Of Activities" the report runs fine.
Please help me.
Jimit

Resolved. Recreated the report

Similar Messages

  • Debug [nQSError: 27005] Unresolved column

    In nqserver.log i have a lot of errors like:
    [2012-07-27T10:00:53.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: db58cb579794228a:-21bc1da7:138c38f67d1:-8000-000000000000337f] [tid: a147c700] [nQSError: 27005] Unresolved column: "report"."variables".
    [2012-07-27T10:00:53.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: db58cb579794228a:-21bc1da7:138c38f67d1:-8000-000000000000337f] [tid: a147c700] [nQSError: 27005] Unresolved column: "report"."variables". [[
    [nQSError: 43113] Message returned from OBIS.
    Errors comes from a dashboard that contains several reports, section conditions, dashboard prompts.
    Is it possible to identify exact object (specific report / dashboard prompt ...) causing this error?

    It was not the case. Repository and report was ok. To find where is the issue I needed to add objects to new dashboard individually and see when error shows up.
    The problem seems to be OBIEE 11.1.1.6 bug. Issue occurs in dashboard prompt when I add any "Variable Prompt" and sepeify choice list with custom values. Then when I use it in dashboard and click "Apply" all works fine, but there is an error added to BI server log file: Unresolved column: "report"."variables".
    Reproduced it in totally new dashboard prompt with just one "Variable Prompt".
    Workaround: created dedicated database table "VALUES_LIST" and filled with all combo box values needed in reports, added it to repository, and now use only "Column Prompt" in all dashbaord prompts. Not perfect solution but want to have logs clear before going live...

  • NQSError: 27005 Unresolved Column - No Column Security Applied

    I am facing this issue since last few days - I'll be thankful if anyone can help me out.
    I am receiving the error:
    Error Code: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000 Code: 10058. [NQODBC][nQSError: 10058] A general error has occurred.
    [nQSError: 43113] Message returned from OBIS. [nQSError: 27005] Unresolved Column: <Dimension Name>.<Column Name>. Please have your System Administrator look at the log for more details on this error. (HY000).
    This error is occurring randomly on some analytics for all those users who do not belong to BI Administrator Role.
    I have searched for the solution of this error and found that by setting the parameter PROJECT_INACCESSIBLE_COLUMN_AS_NULL in NQSConfig.ini will resolve this issue. But firstly this is the case when you have applied the security on column but I haven't applied security on any column. Secondly I have looked in NQSConfig.ini and the above mentioned parameter's value is already set to Yes.
    When I gave the BI Administrator Role to any user than this error do not occurr.
    Can anyone help.
    Edited by: 970786 on Nov 12, 2012 6:31 AM

    This is a bug in 11.1.1.6.0: Bug 13976546 - UNRESOLVED COLUMN ERROR IN 11G AFTER UPGRADE
    It is scheduled to be fixed in 11.1.1.7.0. Refer to ID 1464961.1 on Oracle Support to get more information.
    Please mark if helpful/correct.

  • Issue with Agent in OBIEE11g(11.1.1.7) - In attachment getting unresolved column error

    Hi All,
    I have created an agent and scheduled to run for specific time with analysis as my delivery content.
    It appears in my homepage as well as i can able to receive through email. But in the attachment i am getting the error below:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27005] Unresolved column: ."Customer".Please have your System Administrator look at the log for more details on this error. (HY000).
    But i can able to run the same report without error.
    Could you please let me know if you have faced similar issue.
    Thanks and Regards,
    Karthik

    Hi,
    Thanks for the response. When I provided the same information in "Command" tab, it started working and I am now able to recieve the mails from ODI server.
    Can you please explain why the same information provided in "General" tab not worked by providing in "Command" tab started working all of a sudden?? It is not making any sennse to me what might be the difference between the two.

  • Unresolved column error

    I created a new physical that the exact same as another physical table i have. When i create a report and use my new table i get the below error when using this table. Can someone please hellp?
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27005] Unresolved column: "hpqc_audit_log_prop_EIT"."AP_NEW_VALUE". (HY000)
    SQL Issued: {call NQSGetQueryColumnInfo('SELECT RSUM(COUNT("Defect Facts"."Defect ID")), "Defect Facts"."Closing Date", "Defect Facts"."Defect ID", "Defect Facts"."Detected on Date", "Defect Facts"."Reported Release (Base)", "Defect Facts"."Testing Type", "Defect Facts"."Week of Defect Closed Date", "Defect Facts".Priority, "Defect Facts".Severity, "Defect Facts".Status, "Defect Facts".Type, "Projec Dim".Domain, "Projec Dim".Project, COUNT("Defect Facts"."Defect ID"), case WHEN "Projec Dim".Project = ''PRODUCT_13_2'' then ''Stores'' WHEN "Projec Dim".Project = ''System_Test_13_2'' then ''MOM'' WHEN "Projec Dim".Project = ''Enterprise_13_2'' then ''EIT'' else "Projec Dim".Project end, hpqc_audit_log_prop_EIT.AP_NEW_VALUE, hpqc_audit_log_prop_EIT.AU_TIME FROM Defect')}
    SQL Issued: SELECT RSUM(COUNT("Defect Facts"."Defect ID")), "Defect Facts"."Closing Date", "Defect Facts"."Defect ID", "Defect Facts"."Detected on Date", "Defect Facts"."Reported Release (Base)", "Defect Facts"."Testing Type", "Defect Facts"."Week of Defect Closed Date", "Defect Facts".Priority, "Defect Facts".Severity, "Defect Facts".Status, "Defect Facts".Type, "Projec Dim".Domain, "Projec Dim".Project, COUNT("Defect Facts"."Defect ID"), case WHEN "Projec Dim".Project = 'PRODUCT_13_2' then 'Stores' WHEN "Projec Dim".Project = 'System_Test_13_2' then 'MOM' WHEN "Projec Dim".Project = 'Enterprise_13_2' then 'EIT' else "Projec Dim".Project end, hpqc_audit_log_prop_EIT.AP_NEW_VALUE, hpqc_audit_log_prop_EIT.AU_TIME FROM Defect
    v

    Hi,
    Error clearly shows that there is no column with this name in RPD. Check if this column is there in the RPD and to which logical and physical coulmn it is mapped to.
    Thanks
    Sandeep

  • How to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer

    how to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer

    Looks like the presentation column got Alias before your BMM changes, so in your case renaming logical column and deleting alias is not good to go.
    Keep Alias

  • Unresolved column when using presentation variable in Answers filter

    Hi all,
    I'm using a dashboard prompt that sets a presentation variable - pres_year. I'm using the presentation variable in a request's filter.
    In the 'Criteria' tab, in the filter for the request, I set a year column (YEAR) to the presentation variable via Variable Expr and enter the presentation variable name only. End up with:
    YEAR is equal to / is in @{pres_year}
    When using the dashboard, the prompt and request all work fine. The problem is when I'm in the request in Answers and I click on 'Display Results' button. I get the following error:
    'NQSError: 27005 unresolved column pres_year'
    Any suggestions?
    Thanks.

    I got same error, if i'm using SQL Expression, instead of variable expression in filter section.
    make sure that you followed this:
    filter on year > Add > Variable > Presentation. Then, give the presentation variable name (which you defined in dashboard prompt) in Variable Expr field , click OK
    getting same error when using:
    Filter on year column > Add > SQL Expression > presentation variable. This is not right place to give presentation variable.
    and, error i got:
    *State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27005]* Unresolved column: "var_Year". (HY000)
    so, make sure that you are suing the right one..

  • Unresolved column

    Hi All-
    Today morning i imported one of the dim tables into my RPD and joined it to the respective fact tables and when i generated the report it worked fine after couple of hours when one of users logged in to the OBiee and tried to see that report we are seeing this error
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27005] Unresolved column
    it is happening periodically and when i log in as different user it is working fine. I am not able to understand why it is behaving like this.

    Hi Guys Thanks For your reply's but still it's not working i am able to see the data when i click view data. if i kill all sessions and if i reload server metadata then it will start working again and after couple of hours i will see the same error even re importing is not working it is behaving in the same but the same if i import it and create a report it's working fine.

  • OBIA - Answer error :  [nQSError: 27037] Unresolved level

    HI,
    We installed the OOTB OBIA sandbox and I'm unable to create a column formula with the time function AGO in Answer.
    I tried : AGO("Fact - Sales Invoice Lines"."Invoiced Amount", "Core"."Date"."Year",1) where "Core"."Date"."Year" is from the BMM hierarchies.
    I tried many combinations for the time_level unsuccessfully.
    I got the follwing error :
    Formula syntax is invalid.
    [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27037] Unresolved level: "Core"."Date"."Year". (HY000)
    Can someone tell me what I'm doing wrong?
    Thank you for any help you could provide.
    Gaétan

    Ok, I found out why it wasn't working, I had to add the Hierarchy in the column formula.
    This is the default way in the column formula editor : AGO("Fact - Sales Order Lines"."Ordered Quantity","Time"."Year", 1)
    I had to add : AGO("Fact - Sales Order Lines"."Ordered Quantity","Time"."Time"."Year", 1) to make it work,
    I don't understand why when you pick it in the column formula editor, you're unable to get the complete string for the time_level parameter.
    Do you know why?

  • [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred

    Hello guys,
    I have one fact table (Fact) and five dimension tables (Dim A, Dim B, Dim C, Dim D and Dim E).
    The fact structure: PK_Fact (primary key), Column A, Column B, ..*
    The dimensions structure:
    Dim A : PK_Dim_A (primary key), Column A1, Column A2, ..*
    Dim B : PK_Dim_B (primary key), Column B1, Column B2, ..*
    Dim C : PK_Dim_C (primary key), Column C1, Column C2, ..*
    Dim D : PK_Dim_D (primary key), Column D1, Column D2, ..*
    Dim E : PK_Dim_E (primary key), Column E1, Column E2, ..*
    The fact table is connected to Dim A with PK_Dim_A and PK_Fact, to Dim B with PK_Dim_B and PK_Fact, to Dim C with PK_Dim_C and PK_Fact, to Dim D with PK_Dim_D and PK_Fact, to Dim E with PK_Dim_E and PK_Fact. The joins have been defined in the physical layer and in the business layer.
    Fact-->Dim A
    Fact-->Dim B
    Fact-->Dim C
    Fact-->Dim D
    Fact-->Dim E
    When I request column(s) from fact table and one other dimension table, everything is fine. When I request columns from fact table and more than one other dimension table, I have the following message error :
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source...does not contain mapping for .... (HY000)
    Please could you help me to resolve this error
    Thank you very much.

    Hi,
    have you define the level for all the dimensions for the Logical Table Source of your Logical Fact Table? When you perfrom the consistency check (Ctrl+k) do you receive any warning or error?
    Thank you.
    Regards,
    Gianluca

  • 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error

    Hi!
    When change column change, first query return OK. Then I choose drill down level of year and this error occured.
    What does this error means?
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15039] Level [TIMES.DAY_ID, NADZORNE_EKIPE.ID] has drilldown levels associated with multiple (likely overlapping) dimensions: (1) degenerate dimension, (2) degenerate dimension. Please check logical table key definitions, particularly for fact tables, and level-based measure definitions. (HY000)
    SQL Issued: SELECT TIMES.CALENDAR_YEAR_ID saw_0, "TIMES"."CALENDAR_QUARTER_ID" saw_1, NADZORNE_EKIPE.NAZIV saw_2, FCT_ZAPISNICI.ID saw_3, FCT_ZAPISNICI.NEPRAVILNOST saw_4, FCT_ZAPISNICI.NEPRAVILNOST/FCT_ZAPISNICI.ID*100 saw_5, FCT_ZAPISNICI.ID-FCT_ZAPISNICI.NEPRAVILNOST saw_6, FCT_ZAPISNICI.PREKOSOV saw_7, FCT_ZAPISNICI.PREKMASE saw_8, FCT_ZAPISNICI.PREKNOSIV saw_9, FCT_ZAPISNICI.PREKDIMENZIJE saw_10, FCT_ZAPISNICI.DJELJIV_TERET saw_11, FCT_ZAPISNICI.NEDJELJIV_TERET saw_12, FCT_ZAPISNICI.PRAVNA_OSOBA saw_13, FCT_ZAPISNICI.FIZICKA_OSOBA saw_14, AGGREGATE(saw_5 BY ), AGGREGATE(saw_6 BY ), AGGREGATE(saw_5 BY saw_0), AGGREGATE(saw_6 BY saw_0) FROM "TEB Data Warehouse Solution" WHERE ((TIMES.DAY_ID >= date '2009-01-01') AND (TIMES.DAY_ID <= date '2009-12-31')) AND ("TIMES"."CALENDAR_YEAR_ID" = 2009) ORDER BY saw_0, saw_1, saw_2
    THX

    Your error is this:
    nQSError: 15039 Level http://TIMES.DAY_ID, NADZORNE_EKIPE.ID has drilldown levels associated with multiple (likely overlapping) dimensions: (1) degenerate dimension, (2) degenerate dimension. Please check logical table key definitions, particularly for fact tables, and level-based measure definitions.
    Did you check logical table key definitions, particularly for fact tables, and level-based measure definitions ?

  • [nQSError: 46036] Internal Assertion:  error

    Hi I am a new bie to OBIEE, I am trying to create a simple example ...
    I use two tables product and product_stock noth from different schema.....
    the structure of the tables are as follows
    PRODUCT_STOCK
    INT_PRODUCT_ID     NUMBER(10)                    
    INT_WAREHOUSE_ID     NUMBER(10)                    
    INT_STOCK_LEVEL     NUMBER(10)          
    has a primary key on the int_product_id and int_warehouse_id
    PRODUCT_TBL
    INTPRODUCTID     NUMBER(10)          
    NVCTITLE     VARCHAR2(255)     
    INTREGIONID     NUMBER(10)
    product_tbl has a primary key on yhe intproductid column
    now in physical layer of the administration tool, i use the new foreign key option in the physical diagram from the product_tbl to the product_stock table
    then in the BMM layer, i create complex join from product_tbl to the product_stock table in the business diagram
    my repository is consistent and able to use it in answers
    but in the answers page when i select intproductid from the product_tbl and int_stock_level from the product_stock table, i get the following error
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition m_CountFields == static_cast<int32>(m_ColumnNameVector.size()), file .\Src\SQCSCacheStorageListStream.cpp, line 222. (HY000)
    SQL Issued: SELECT PRODUCT_TBL.INTPRODUCTID saw_0, PRODUCT_STOCK.INT_STOCK_LEVEL saw_1 FROM test WHERE PRODUCT_TBL.INTPRODUCTID = 6048 ORDER BY saw_0, saw_1
    Kindly help me to find what is the reason behind this error.
    Thanks

    After changing the value to 512 KB,I restarted OC4J and BISERVER, even then am getting the error as follows
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition m_CountFields == static_cast<int32>(m_ColumnNameVector.size()), file .\Src\SQCSCacheStorageListStream.cpp, line 222. (HY000)
    SQL Issued: SELECT PRODUCT_TBL.INTPRODUCTID saw_0, PRODUCT_STOCK.INT_STOCK_LEVEL saw_1 FROM test WHERE PRODUCT_TBL.INTPRODUCTID = 6048 ORDER BY saw_0, saw_1

  • New Repository variable failing with 'Unresolved Identifier' error

    Hi,
    I created a new repository variable and when used in the Segments/Reports it is failing with 'Unresolved Identifier' error. This is happening intermittently and sometimes it is getting the results as expected, Can you please let me know where I am wrong?
    Thanks,
    Viswanath K M

    Couple things to check here are :
    1) Make sure you have spelled the variable name correct.
    2) Make sure you are using the repository variables with appropriate data type columns.
    Regards,
    -Amith.

  • [nQSError: 12002] Socket communication error at call=recv: (Number=10038)

    Hi, When I try to run any reports in Oracle Answers I am getting the following error:
    Odbc driver returned an error (SQLExecDirectW).
    State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred.
    nQSError: 12002 Socket communication error at call=recv: (Number=10038) An operation was attempted on something that is not a socket. (HY000)
    When I try to issue a 'Direct Database Request' from Answers, it is working fine and I can see the results. The error is occuring only when I select any columns from the Presentation Catalog and try to run the Adhoc report.
    Please could you help me fix this issue.
    Thanks
    Srikanth

    Hi, When I try to run any reports in Oracle Answers I am getting the following error:
    Odbc driver returned an error (SQLExecDirectW).
    State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred.
    nQSError: 12002 Socket communication error at call=recv: (Number=10038) An operation was attempted on something that is not a socket. (HY000)
    When I try to issue a 'Direct Database Request' from Answers, it is working fine and I can see the results. The error is occuring only when I select any columns from the Presentation Catalog and try to run the Adhoc report.
    Please could you help me fix this issue.
    Thanks
    Srikanth

  • [nQSError: 27004] Unresolved table: "TopVendors".

    Hi experts,
    Before posting on this,i have searched the blog and even google which dint help me.
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27004] Unresolved table: "TopVendors". (HY000)1)Iam the administrator user and i have done some reports.All is well,but when iam working with other reports changing the default RPD.In the Answers Catalog Manager,wen i go and check the previously saved report in MY FOLDERS its giving me the above error.
    The above error persists if i open the standard reports on SAMPLESALES in shared folders.
    2) In manage sessions window when i want to check the log file generated for the query run.Its giving me LOG NOT FOUND.
    Can anyone help me out on this issue.
    TIA,
    Kranthi.

    Hi Kranthi,
    Here are my responses:
    1) I am working on only one database but different RPD's according to my requirement im building it.When i write it into answers as different sheets and saving >them into my folders catalog.
    To see the saved work also is it neccessary to have multiple presentation layer,multiple RPD on single servers??Explain me on this??Response: Each presentation server can only communicate with 1 RPD. They use an ODBC connection (AnalyticsWeb is that system DSN ODBCconnection) to communicate to that RPD via the BI Server. By default, the Presentation server communicates with the default repository. You have to override this default behavior if you want a different user experience.
    So right now, you only have 1 active RPD at a time, which is the one that is the "Default". Unless you setup multiple system DSN's and multiple presentation services, you'll be stuck in the position you are where if you want to run Report A from repository 1, then Repository 1 has to be the active repository.
    2)If we want to see saved sheet in answers,is it must we should set the concerned RPD to default??Response: I kind of covered this a little bit in my last response, but yes. By default, OBIEE on install only sets up a single System DSN connection called AnalyticsWeb. This connection, by default, connects to the default RPD. It is the only way for a Presentation Server to communicate to the RPD. So if you only have 1 System DSN defined at a time, then you have to always have that RPD be the default so the Presentation Server can communicate with it. Otherwise, you'll need to setup additional System DSN's (1 for each RPD). See the link I posted in my last message on how to set that up.
    3) if i have more than 10 RPD's in same database,should i change this these many times??Response: There is no limit to how many RPD's or presentation servers you can have on a single install of OBIEE. That being said, as a best practice I would recommend not going past the 5 you already have. Instead of having multiple RPDs against the same sources, you should make different BMM layers in OBIEE using the same RPD. This will reduce redundant physical connections across the RPDs. You can also setup a projects and a multi-user development (MUD) environment on a single RPD that has multiple BMM folders.
    4)Im the administrator user and im developing reports.For me only this issue is coming up.What about when i give access to other members??Response: If you continue your development as is, users will only be able to access reports against the live or "Default" RPD. All other reports you are creating will give errors similar to the title of this post. This is why I would further recommend that you consolidate your RPDs into a single file.
    Why did you originally create 5 RPDs? What was the business requirement behind that?
    Thanks!
    -Joe

Maybe you are looking for