NQSError:73006 Cannot obtain Oracle BI Servers from either primary Cluster

Hi,
OBIEE11.1.1.6.2BP1 All working properly untill this noon after that i got nQSError: 73006 error. while cross checking services status--> BI All services are up and running. i just verified with OPMNCTL status.Weblogic console and Weblogic EM is run and the default weblogic userid works fine to login to console and EM. However, with the same userid when I am Logging into Analytics, I got the below error
error on BI Analytics login page:
"Unable to Sign In
An error occurred during authentication. Try again later or contact your system administrator "
while checking the bipresentation server -->sawlog0.txt got the below error message:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[2012-09-12T20:19:57.000+08:00] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.searchidentities] [ecid: 00iA1OpxyBnFw0zlrL0Bjz3awoi2zG2zn0001Cw000000,0:280] [tid: 6628] Error retrieving user/group data from Oracle BI Server's User Population API.
Unable to create a system user connection to BI Server while running user population queries
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 73006] Cannot obtain Oracle BI Servers from either the primary Cluster Controller (10.10.1.7) or the secondary Cluster Controller () specified for the clustered DSN. (HY000)[[
File:odbcuserpoploaderimpl.cpp
Line:719
Location:
     saw.security.odbcuserpopulationimpl.searchidentities
     saw.security.userpopulationmanagerimpl.getaccountdetailsbyid
     saw.CatalogAttributes.cache.cleanup
     saw.taskScheduler.processJob
     saw.threadpool.taskscheduler
     saw.threads
ecid: 00iA1OpxyBnFw0zlrL0Bjz3awoi2zG2zn0001Cw000000,0:280
ThreadID: 6628
task: Cache/CatalogAttributes
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Note i have tried below link but no luck
http://docs.oracle.com/cd/E15586_01/fusionapps.1111/e14496/bi_trouble.htm
BI 11g sign in problem
http://debaatobiee.wordpress.com/2011/03/17/obiee-11g-error-during-authentication/
Re: OBIEE 11g Cluster Controller Failed to start
My System Configuration
OBIEE11.1.1.6.2BP1
windows 2008 64bit
IE8
jrockit-jdk1.6.0_31-R28.2.3-4.1.0
Static IP configured (loop back adaptor and host file has updated with correct ip,
SSL configured with current system
Thanks
Deva

Hi,
Yes changed,i am just working on the BI Composer part. applied JDEV 13952743 patch then extended domain...by script..
got some error then rollback jdev patch file then reapplied.
FYI:
Applying JDev 13952743 Patch file.
E:\>cd E:\opatch_top\13952743
E:\opatch_top\13952743>set PATH=%PATH%;D:\Oracle\Middleware\Oracle_BI1\OPatch
set ORACLE_HOME=D:\Oracle\Middleware\oracle_common
set PATH=%ORACLE_HOME%\bin;%PATH%
set JAVA_HOME=%ORACLE_HOME%\jdk
set PATH=%JAVA_HOME%\bin;%PATH%
set PATH=%ORACLE_HOME%\OPatch;%PATH%
E:\opatch_top\13952743>opatch version
E:\opatch_top\13952743>opatch apply
used below command for rollback
opatch rollback -id 13952743
Thanks
Deva

Similar Messages

  • I have read some forums but cannot obtain a still image from iMovie.  How do I do this in iMOvie 11 9.04.

    Hi
    Can anyone tell me how to obtain a still image from iMovie 11 version 9.04.  I have read some forums but cannot find the solution.  I have also read the Apple help pages but the instruction does not fit the options available.  I need to get a few stills from a movie to add the stills to the website.  PLease any help?

    Thank you Neil,I have a macbook pro with snow leopard v.10.6.8.included intell core 2 duo with a processor speed 2.5ghb with one processor and cores 2.
    can i download onto my laptop an update  by internet to my imovie 8.0.6 directly or as i have read, the system will not let me do that unless i have imovie 9.0.0 already which i do not have.
    Perhaps i misunderstand you. Do you mean purchase a software copy from an apple Store and the can i directly upgrade.

  • Not supported: Cannot obtain an error message from the server on Win7

    App is written against the RDC and runs fine on Xp, but on Win7 it fails when I change databases. Ie you can select from several databases from within the app. When doing so the app closes the RDC connection:
         if (m_Application != NULL) m_Application.Release();
         m_Application = NULL;
         if (m_Report != NULL) m_Report.Release();
         m_Report = NULL;
    So that it is then reopened. This works fine on Xp, but not on Win7. I also tried the 11.5 Sp4 runtime. The ODBC log complain about an invalid handle.
    I know that the RDC is deprecated, but I wonder if anyone else has run into this?

    Go to this link, and book mark it, and it will get you to our download page:
    http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
    Select Crystal Reports Release 2 and then Service Packs
    Thanks again
    Don

  • Have added email acct to iphone...cannot pick up any emails from either acct.

    have successfully added my verizon email acct along with existing gmail.....however, cannot receive any messages from pc to phone....what step did I miss?

    to ensure you didn't miss anything take a look at this link
    IOS setting up mail  http://support.apple.com/kb/ht4810
    For gmail look here  http://support.apple.com/kb/TS3058

  • RPD - Cannot obtain number of columns for the query result :Working with MS SQL 2012 schema

    Hi All,
    I have created my warehouse in MS SQL 2012.
    For management purpose, I have created different schemas in SQL database
    In RPD, Physical layer, when i view data > I get error as
    [nQSError:16002] Cannot obtain number of columns for the query result.
    [nQSError:16001] ODBC error state : S0002 code : 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server] Invalid object name 'tbl'..
    [nQSError:16001] ODBC error state : S0002 code : 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server] Statements could not be prepared..
    I have already browsed : OBIEE 11g Strange ODBC Driver Error with SQL Server : Total Business Intelligence ... did not help me
    please help!!!

    Hi All,
    After all R&D it is been found that Oracle business administrator( RPD) needs default dbo schema. It doesn't accept custom schema for pulling data.
    If anybody have other views please share.!!
    Thank you

  • 'Cannot obtain error message from server' when trying to use ODBC

    Post Author: Grant C
    CA Forum: Data Connectivity and SQL
    Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server.  The SQL for the report is in a method in an oracle package.
    When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs.  However, when I try to use an ODBC connection I get the following error:
    Database Connection Error: 'Cannot obtain error message from server.'
    The ODBC link is set up as a System DSN, which works fine when I test it.  I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
    Any thoughts?  Thanks.

    Hi Mars-
    It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
    If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
    Have a good day-
    Tom W
    National Instruments

  • Database Connector error: 'cannot obtain error message from server'

    I am using Oracle stored procedures and I have used IN parameters for input and INOUT parameter of REF_CURSOR TYPE for returning resultset in Crystal Report 2008 by using package. Now when I am trying to add the package in the Crystal Report, parameter input box prompts, I enter some values and gets Database Connector error: 'cannot obtain error message from server'.
    But when I do not use INPUT parameters and use OUT parameter of REF_CURSOR type it runs well without any issues.
    We are using ODBC connection for Oracle.
    Kindly suggest.

    Hello,
    Search the Knowledge Base for "oracle store procedures" and you'll find a document on how to write a SP so CR can use them.
    Thank you
    Don

  • Cannot obtain disk name from vm.cfg.

    When I try to import a VM template from a server pool,it always failed at "Cannot obtain disk name from vm.cfg.".
    There are two servers in this server pool.And I have set up NFS file system for /OVS folder.
    Details for vm.cfg are:
    # Automatically generated xen config file
    name = "OVM_EL4U5_X86_PVM_4GB"
    memory = "1024"
    disk = [ 'file:/OVS/seed_pool/OVM_EL4U5_X86_PVM_4GB/system.img,hda,w', ]
    vif = [ '', ]
    bootloader="/usr/bin/pygrub"
    vcpus=1
    vfb = ["type=vnc,vncunused=1,vnclisten=0.0.0.0"]
    on_reboot = 'restart'
    on_crash = 'restart'
    If I do importing for a server pool with just one server in it,it always works well.
    Who can help me with this problem?
    Thanks very much,

    Is the NFS mounted /OVS on both servers read/write accessible to the root user? ie have you NFS exported the /OVS share with the no_root_squash option?

  • Adobe Bridge CC cannot obtain files from this device.

    I am getting this error message when I attempt to upload videos to my Mac from my Canon 7D:
    Adobe Bridge CC cannot obtain files from this device. Please be sure the device is properly plugged in and the battery is full charged.
    Battery is full charged and camera is connected properly. I have restarted the camera, Bridge, and the computer as well. I tried reinstalling Bridge and it allowed me to upload 3 of the video files. Then the error message came back. There were a few RAW images on the camera that I was able to upload, but when I tried the video again I got the error message. I read a post about renaming the folder that you are saving to as a fix. I tried that as well, but it did not work.
    Any help would be greatly appreciated! Thanks!
    -J

    This excerpt is from a long-gone post by author Bruce Fraser:
    Bruce Fraser - 4:17pm Jun 14, 04 PST (#5 of 21) Opening files directly from the camera is a bad idea for a variety of reasons*, and it most certainly isn't faster than using a FireWire or USB2 card reader. 
            • Drains the camera battery
            • Runs the risk of the software you're using to open the images writing to the card and destroying the format
            • Runs a small but significant risk of USB power frying the camera
    • runs the risk of wearing out the camera's connector,      
    • Slowest method known to mankind of getting images off a CF or SD card

  • Cannot connect properly to Oracle on Linux from Windows

    Good day all,
    I’ve got 2 virtual machines running on my Mac:
    -     Centos 5.4 with Oracle 11gR2
    -     Windows 2003 server with Oracle 10gR2
    From Linux box I have access to Oracle database on Windows box (both directly and via a database link), however from Windows I have problems accessing the oracle database on the Linux box.
    From Windows, if I try to set up a connection using Oracle’s SQL Developer using connection type “Basic”, I get “IO Error: The Network Adapter could not establish the connection”. When I use “TNS”, then it works.
    From the linux box it all works fine as the “oracle” user, but when I log on as another user (in this case “informatica”) it doesn’t work properly any more.
    To sketch what both environments look like.
    Windows:
    -     Machine name WS2003Ora10g
    -     Etc/hosts
    o     127.0.0.1 localhost
    o     #loopback adapter
    o     192.168.12.100     localhost
    o     #network adapter
    o     192.168.12.10     WS2003Ora10g
    o     # external machine
    o     192.168.12.110     ilmserver
    -     system variables
    o     TNS_ADMIN, set to network/admin path in Oracle home dir
    listener
    C:\Documents and Settings\Administrator>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 24-AUG-2011 17:38:06
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    Start Date 24-AUG-2011 16:29:33
    Uptime 0 days 1 hr. 8 min. 33 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
    Listener Log File C:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WS2003Ora10g)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "ora10gr2" has 1 instance(s).
    Instance "ora10gr2", status READY, has 1 handler(s) for this service...
    Service "ora10gr2XDB" has 1 instance(s).
    Instance "ora10gr2", status READY, has 1 handler(s) for this service...
    Service "ora10gr2_XPT" has 1 instance(s).
    Instance "ora10gr2", status READY, has 1 handler(s) for this service...
    The command completed successfully
    C:\Documents and Settings\Administrator>lsnrctl services
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 24-AUG-2011 17:40:43
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "ora10gr2" has 1 instance(s).
    Instance "ora10gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:25 refused:0 state:ready
    LOCAL SERVER
    Service "ora10gr2XDB" has 1 instance(s).
    Instance "ora10gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1002 state:ready
    DISPATCHER <machine: WS2003ORA10G, pid: 2852>
    (ADDRESS=(PROTOCOL=tcp)(HOST=WS2003Ora10g)(PORT=1031))
    Service "ora10gr2_XPT" has 1 instance(s).
    Instance "ora10gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:25 refused:0 state:ready
    LOCAL SERVER
    The command completed successfully
    Linux
    -     Machine name ilmserver
    -     Etc/hosts
    o     127.0.0.1          localhost.localdomain localhost
    o     ::1          localhost6.localdomain6 localhost6
    o     192.168.12.1     routerip     rtrip
    o     192.168.12.110     ilmserver     ilmsvr
    o     192.168.12.10     WS2003Ora10g     winora
    system variables (in bashprofile)_
    o     export PATH=$PATH:/usr/java/jdk1.7.0/bin
    o     export PATH=$PATH:/usr/sbin
    o     export PATH=$PATH:/sbin
    o     export JAVA_HOME=/usr/java/jdk1.7.0
    o     PATH=$PATH:$HOME/bin
    o     export PATH
    o     export ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
    o     export ORACLE_BASE=/home/oracle/app/oracle
    o     export ORACLE_SID=orcl
    o     export TNS_ADMIN=$ORACLE_HOME/network/admin
    o     export ORACLE_HOSTNAME=ilmserver
    o     export PATH=$PATH:$ORACLE_HOME/bin
    Both the "oracle" and the "informatica" user have these environment variables.
    listener
    Logged in as “oracle” user:*
    [oracle@ilmserver ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 24-AUG-2011 19:12:35
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 24-AUG-2011 17:30:39
    Uptime 0 days 1 hr. 41 min. 55 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /home/oracle/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /home/oracle/app/oracle/diag/tnslsnr/ilmserver/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Services Summary...
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@ilmserver ~]$ lsnrctl services
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 24-AUG-2011 19:13:28
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    Services Summary...
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:19 refused:0 state:ready
    LOCAL SERVER
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1022 state:ready
    DISPATCHER <machine: ilmserver, pid: 9648>
    (ADDRESS=(PROTOCOL=tcp)(HOST=ilmserver)(PORT=52395))
    The command completed successfully
    But logged in as “informatica” user I get following:
    [informatica@ilmserver ~]$ lsnrctl status
    bash: lsnrctl: command not found
    [informatica@ilmserver ~]$ lsnrctl services
    bash: lsnrctl: command not found
    even though the oracle bin directory sits in PATH.
    Pinging from windows:
    C:\Documents and Settings\Administrator>ping ilmserver
    Pinging ilmserver [192.168.12.110] with 32 bytes of data:
    Reply from 192.168.12.110: bytes=32 time=1ms TTL=64
    Reply from 192.168.12.110: bytes=32 time<1ms TTL=64
    Reply from 192.168.12.110: bytes=32 time<1ms TTL=64
    Reply from 192.168.12.110: bytes=32 time<1ms TTL=64
    Ping statistics for 192.168.12.110:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 1ms, Average = 0ms
    That works fine.
    Telnet from Windows:
    C:\Documents and Settings\Administrator>telnet 192.168.12.110 1521
    Connecting To 192.168.12.110...Could not open connection to the host, on port 1521: Connect failed
    This result is the same for either just having port 1521 open, or turning the Linux firewall off altogether. Also same when using IP address.
    Just to be complete, here are the results from the Linux box.
    *[oracle@ilmserver informatica]$ ping WS2003Ora10g*
    PING WS2003Ora10g (192.168.12.10) 56(84) bytes of data.
    64 bytes from WS2003Ora10g (192.168.12.10): icmp_seq=1 ttl=128 time=1.63 ms
    64 bytes from WS2003Ora10g (192.168.12.10): icmp_seq=2 ttl=128 time=0.222 ms
    64 bytes from WS2003Ora10g (192.168.12.10): icmp_seq=3 ttl=128 time=0.255 ms
    64 bytes from WS2003Ora10g (192.168.12.10): icmp_seq=4 ttl=128 time=0.258 ms
    --- WS2003Ora10g ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 3000ms
    rtt min/avg/max/mdev = 0.222/0.593/1.639/0.604 ms
    *[oracle@ilmserver ~]$ telnet WS2003Ora10g 1521*
    Trying 192.168.12.10...
    Connected to WS2003Ora10g (192.168.12.10).
    Escape character is '^]'.
    ... works for all users.
    Checking out the port situation on Linux:
    [informatica@ilmserver ~]$ netstat -an | grep 1521
    tcp 0 0 127.0.0.1:1521 0.0.0.0:* LISTEN
    tcp 0 0 127.0.0.1:1521 127.0.0.1:43782 ESTABLISHED
    tcp 0 0 127.0.0.1:1521 127.0.0.1:44290 ESTABLISHED
    tcp 0 0 127.0.0.1:58289 127.0.0.1:1521 TIME_WAIT
    tcp 0 0 127.0.0.1:58287 127.0.0.1:1521 TIME_WAIT
    tcp 0 0 127.0.0.1:1521 127.0.0.1:43792 ESTABLISHED
    tcp 0 0 127.0.0.1:54116 127.0.0.1:1521 ESTABLISHED
    tcp 0 0 127.0.0.1:1521 127.0.0.1:44283 ESTABLISHED
    tcp 0 0 ::ffff:127.0.0.1:54123 ::ffff:127.0.0.1:1521 ESTABLISHED
    tcp 0 0 ::ffff:127.0.0.1:30135 ::ffff:127.0.0.1:1521 ESTABLISHED
    unix 2 [ ACC ] STREAM LISTENING 129262 /var/tmp/.oracle/sEXTPROC1521
    [ the sequence of dots means I took out a whole lot or lines with virtually the same information, only different port(s) ]
    What’s noticeable is that port 1521 seems solely assigned to the localhost IP-address, 127.0.0.1.
    Another thing I noticed is that from a different user in Linux, so not “oracle”, using SQL Developer I cannot access the local Oracle database via TNS. When choosing TNS the dropdown box for “Network Alias” – which normally is populated with entries from TNSNAMES.ORA – is completely empty. On a “users and groups” level I basically assigned all the groups the oracle user is member of, to the other user (called informatica).
    And to make it even more interesting, at first it worked using “Basic” (in SQL Developer), but since implementing the TNS_ADMIN environment variable, it doesn’t work at all !!!
    Trying it via SQLPLUS as the “informatica” doesn’t work either:
    [informatica@ilmserver ~]$ sqlplus system
    bash: sqlplus: command not found
    I’ve assigned the “dba” group to “informatica”, or rather, I have assigned all groups to the “informatica” user as the “oracle” user has.
    Needless to say I am no Linux expert, rather a quite inexperienced Linux-user.
    So bottom line, the situation I’d like to be able to create is the following:
    •     Linux Oracle DB accessible from “informatica” (or any other) user on Linux, via both TNS and java-based
    •     Linux Oracle DB accessible from remote machine (running Windows 2003 server) via both TNS and java-based
    •     And for Informatica to work properly, it says it needs the TNS_ADMIN environment variable, so the “informatica” user must have full Oracle connectivity with TNS_ADMIN in place.
    Any help is greatly appreciated.
    Thanks, Patrick

    Hi Billy,
    Thanks for your elaborate answer.
    Not sure whether I can use it though, since the application using the oracle database (i.e. Informatica ILM 5.3.2) appears to have a specific need for TNS.
    I thought I had a solution (not the prettiest for sure) by just copying TNSNAMES.ORA to an accessible location, change ownership to "informatica" user, have TNS_ADMIN point to it, and Bob should be my uncle. Well... he isn't!
    In SQL Developer when I choose TNS as connection type, the drop down box is STILL empty.....aaaaahhhh!!!!!
    I was advised to play around with primary groups, so I tried oinstall and dba as primary groups for informatica user, all to no avail.
    And I can't even test it with SQLPLUS because I don't have access to it as "informatica".
    Who knows what the exact reason for that is... I know I'm a far cry from an experienced linux user, but I assumed that having the Oracle Home bin directory in PATH, and assigning the oinstall group to informatica user, would ensure access to to any executable in there. Well... NOT!!!
    +[informatica@ilmserver ~]$ sqlplus system@orcl+
    bash: sqlplus: command not found
    This is driving me nuts. Thought that finding a solution for this wouldn't be this hard, but essentially I've been digging for 3 days now.
    To provide more background, here are the env.variables:
    [informatica@ilmserver ~]$ env
    SSH_AGENT_PID=21054
    HOSTNAME=ilmserver
    DESKTOP_STARTUP_ID=
    TERM=xterm
    SHELL=/bin/bash
    HISTSIZE=1000
    GTK_RC_FILES=/etc/gtk/gtkrc:/home/informatica/.gtkrc-1.2-gnome2
    WINDOWID=262nnnnn
    USER=informatica
    LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
    ORACLE_SID=orcl
    GNOME_KEYRING_SOCKET=/tmp/keyring-LXptz1/socket
    ORACLE_HOSTNAME=ilmserver
    ORACLE_BASE=/home/oracle/app/oracle
    SSH_AUTH_SOCK=/tmp/ssh-CFDat21018/agent.21018
    SESSION_MANAGER=local/ilmserver:/tmp/.ICE-unix/21018
    USERNAME=informatica
    TNS_ADMIN=/var/temp
    MAIL=/var/spool/mail/informatica
    PATH=/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/informatica/bin:/usr/java/jdk1.7.0/bin:/usr/sbin:/sbin:/home/oracle/app/oracle/product/11.2.0/dbhome_1/bin
    DESKTOP_SESSION=default
    GDM_XSERVER_LOCATION=local
    INPUTRC=/etc/inputrc
    PWD=/home/informatica
    JAVA_HOME=/usr/java/jdk1.7.0
    XMODIFIERS=@im=none
    LANG=en_US.UTF-8
    GDMSESSION=default
    SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
    SHLVL=2
    HOME=/home/informatica
    GNOME_DESKTOP_SESSION_ID=Default
    LOGNAME=informatica
    CVS_RSH=ssh
    DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-axxxxxxxxo,guid=xxxxxxxxxxxxxxxxxxxxxxx
    LESSOPEN=|/usr/bin/lesspipe.sh %s
    DISPLAY=:0.0
    ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
    G_BROKEN_FILENAMES=1
    COLORTERM=gnome-terminal
    XAUTHORITY=/tmp/.gdmKEYS0V
    Thanks, Patrick

  • Adobe Bridge cs5 cannot obtain files from this device.

    I download photos to my computer using a Kingston downloading device.
    Since installing Mavericks the above message comes up and will not carry out the download.
    Is this a known problem with Mavericks and is there a remedy?
    I would say that using the same device my photos download perfectly on my MacBook Pro.
    Messages
    1. Adobe Bridge CS5.1 cannot obtain files from this device.
    Please ensure that the device is connected properly and that the battery is charged and try again.
    2.I also get a message telling me that the "disk was not ejected propery" which is not the case.

    Thanks Eric
    The MacBook Pro is not running Mavericks and sorry about the double post.
    I have actually solved the problem and the answer might be of use to others with the same problem.
    There is a firmware update that will correct the problem.
    It's at
    http://www.kingston.com/en/support/technical/products?model=fcr-hs3
    There is a small catch in  that the firmware update can only be done on a Windows machine but I have been told that once this is done it can be used with OSX9 .I have just done the download but  I haven't checked this out yet.

  • Cannot connect to Oracle 11gR2 database from SQL Server 2005

    Both SQL Server (Windows) and Oracle (Linux) are in 64bit environments.
    I have done the following on a Windows 2008 R2 with SQL Server 2005:
    Install InstantClient from Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) to C:\Oracle
    Install oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac
    Note: Not sure whether 11.2.0.2.1 version of ODAC will cause any problem since I cannot find 11.2.0.1.0 version.
    I have checked the Allow inprocess of OraOLEDB.Oracle provider in SSMS.
    I have executed sp_addlinkedserver @server = 'ORACLE_TEST', @srvproduct = 'Oracle', @provider = 'OraOLEDB.Oracle', @datasrc = '##.##.##.##:1521/TEST'
    The ##.##.##.## is the ip address of the Linux server which has the Oracle 11gR2 database TEST.
    I have executed sp_addlinkedsrvlogin @rmtsrvname = 'ORACLE_TEST', @useself = 'FALSE', @rmtuser = 'xxxx', @rmtpassword = 'yyyy'
    The xxxx is the oracle username and yyyy is the password for the oracle user xxxx.
    I know the oracle database TEST is up since I have setup connection in Oracle SQL Developer having:
    ##.##.##.## as the hostname
    1521 as the Port
    xxxx as the username
    yyyy as the password
    TEST as the service name
    When I click Test Connection for the linked server ORACLE_TEST in SSMS, it just hang.
    When I issue a query like select count(*) from oracle_test..xxxx.table1, it just run forever. I'm not so sure how to query an oracle table. I have also tried select count(*) from oracle_test.xxxx.xxxx.table1.
    When I retype the password in the Linked Server Properties, it just run forever.
    Do I need to create a tnsnames.ora on the Windows machine?
    Do I need to change the tnsnames.ora on Linux machine?
    I'm very new to Oracle.

    This forum is dealing with connections from an Oracle database to SQL Server - so the Oracle database is the driving site and this is the way round from your linked server set up.
    As you're suing the instant client you might post your issue in the instant client forum:
    Instant Client

  • Database Connection Error: Cannot obtain error message from the server

    I have a SQL statement that wants to add a temp table to the database.   The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
    Database Connection Error: Cannot obtain error message from the server
    Any ideas?
    Thanks in advance,
    Zack H.

    Hi Raghavendra,
    I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
    CREATE TABLE #TibetanYaks(
    YakID char(4),
    YakName char(20) )
    INSERT INTO #TibetanYaks (YakID, YakName)
    SELECT  LastName, FirstName
    FROM      Employee
    WHERE      EmployeeID between '2000' and '3000'
    I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures.  I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
    By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
    Any ideas?
    Zack H.

  • Error: [NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM

    Hi,
    Im unable to open the RPD online  getting following error.
    Note: Im not done any changes. Its works good till yesterday EOD.
    Error:
    [NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
    [NQSError:37001] could not connect to the oracle BI server instance..
    Kindly help me to fix this issue.

    Hi,
    Could you access the answer side.
    Could you see the reports.
    Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
    Copy nqs config file if you have already have a back up.
    Restart the services and try once.
    http://mkashu.blogspot.com
    Regards,
    VG

  • Java.sql.SQLException: Internal error: Cannot obtain XAConnection

    Hi,
    I am getting this error .
    I have a multi data source which serves two Data source and is using load balancing
    I get the below error:
    Cannot obtain XAConnection weblogic.common.ResourceException: No good connections available.
    The complete error trace is below:
    GWMDBBean [onMessage(Message)] 09_MAY 16:24:13:165->EXCEPTION
    java.sql.SQLException: Internal error: Cannot obtain XAConnection weblogic.common.ResourceException: No good connections available.
         at weblogic.jdbc.common.internal.MultiPool.findPool(MultiPool.java:187)
         at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:87)
         at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:61)
         at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1514)
         at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1301)
         at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:426)
         at weblogic.jdbc.jta.DataSource.connect(DataSource.java:383)
         at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:346)
         at com.iflex.fcubs.gwutil.db.GWDBUtil.getConnection(GWDBUtil.java:119)
         at com.iflex.fcubs.gwservices.db.GWMsgProcessor.getConnection(GWMsgProcessor.java:95)
         at com.iflex.fcubs.gwservices.db.inbound.GWMsgSchemaProc.processMsg(GWMsgSchemaProc.java:165)
         at com.iflex.fcubs.gw.mdb.GWMDBBean.processMessage(GWMDBBean.java:1051)
         at com.iflex.fcubs.gw.mdb.GWMDBBean.onMessage(GWMDBBean.java:371)
         at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
         at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
         at weblogic.ejb.container.internal.NewJMSMessagePoller.processOneMessage(NewJMSMessagePoller.java:245)
         at weblogic.ejb.container.internal.NewJMSMessagePoller.run(NewJMSMessagePoller.java:121)
         at weblogic.ejb.container.internal.NewJMSMessagePoller.timerExpired(NewJMSMessagePoller.java:204)
         at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
         at com.iflex.fcubs.gw.mdb.GWMDBBean.processMessage(GWMDBBean.java:1060)
         at com.iflex.fcubs.gw.mdb.GWMDBBean.onMessage(GWMDBBean.java:371)
         at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
         at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
         at weblogic.ejb.container.internal.NewJMSMessagePoller.processOneMessage(NewJMSMessagePoller.java:245)
         at weblogic.ejb.container.internal.NewJMSMessagePoller.run(NewJMSMessagePoller.java:121)
         at weblogic.ejb.container.internal.NewJMSMessagePoller.timerExpired(NewJMSMessagePoller.java:204)
         at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    The Data Sources Configuration are as below:
    <initial-capacity>15</initial-capacity>
    <max-capacity>15</max-capacity>

    This indicates that none of your datasources have been able to successfully connect to the database.
    Please check the connectivity to your database from the datasources.
    Also, you can login into the console and check if the connections are good, by doing test connection on the datasource.
    http://docs.oracle.com/cd/E21764_01/apirefs.1111/e13952/taskhelp/jdbc/jdbc_datasources/TestDataSources.html
    The error you get when you do test connection will help you to understand any connectivity issues.
    Arun

Maybe you are looking for