NSCFBoolean auto error message

I have the latest CC installed on an iMac running the 'Lion' version of OS/X.  Every minute, an error message is posted to my log files indicating an error from Creative Cloud.  Can anyone help me figure out how to get rid of this and what it means?
Error message:
03-11-15 9:49:02.900 PM com.adobe.AdobeCreativeCloud: objc[335]: Object 0x7fff70620fb0 of class __NSCFBoolean autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
Many thanks

If the communication between the two SAP system is synchronous and u r using RFCs or ABAP proxy, then the error message can be sent back to sender in the response.
The email notification at XI can be handled using the Alert configuration at XI. Emails can b configured at SAP system also to be sent directly to the sender user, but that will not involve XI.
If u want to use XI for that scenario then u have to configure BPM, wherein the erro response will be sent using mail adapter to sender.
Regards,
Prateek

Similar Messages

  • Auto Error message?

    Hi!
    I have a question about Error message . Is there a standard error message sending automatically to the sender. if you have tow systems and an xi between.
    /HT

    If the communication between the two SAP system is synchronous and u r using RFCs or ABAP proxy, then the error message can be sent back to sender in the response.
    The email notification at XI can be handled using the Alert configuration at XI. Emails can b configured at SAP system also to be sent directly to the sender user, but that will not involve XI.
    If u want to use XI for that scenario then u have to configure BPM, wherein the erro response will be sent using mail adapter to sender.
    Regards,
    Prateek

  • Automatic Downloads and Strange Error Message: "You can auto-download purchases on this computer with just one Apple ID every 90 days"

    Hi gang-
    Yesterday I noticed that iTunes on my iMac had not auto-downloaded several new songs that I had recently purchased on my iPhone.    In iTunes Preferences, under Store -> Automatic Downloads, I always have Music selected so all songs purchased from any device using my Apple ID normally download automatically.
    To troubleshoot this, I double-checked my Preferences and sure enough, Music was de-selected under Automatic Downloads.   I then Selected it and clicked OK.   Here's where it gets weird and I get this error message:
    This computer is already associated with an Apple ID.  You can auto-download purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 84 days.
    I read and re-read this message and none of it seems to apply to me.   I have only one Apple ID.   I am currently logged in with iTunes to that one Apple ID.   All my iTunes Music ever has been purchased with that one Apple ID.   I am not trying to associate this computer or any other with a different Apple ID.
    I logged iTunes out and then back in again and tried all the above- but same error message.
    So, as it is now, I am unable to turn on Automatic Downloads in iTunes.   
    Anyone know what the heck is going on?
    Thanks!
    Dave

    Hey gang-
    Okay, this gets more and more bizarre.   I sent a support email to Apple and basically they said  "...it seems that someone else associated your Mac with their Apple ID. That's the reason your purchases won't download."
    Yikes!   My wife and I live alone- and we have exactly one and only one Apple ID.    Would somebody have needed physical access to my iMac to do that?
    Support then said "You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer."
    Okay- so I logged into My Account in iTunes.   On the list of associated devices, my own iMac is NOT on that list.   But I am logged in under the same Apple ID I've had for years on that iMac.
    So my big question right now is...if my iMac (that I've owned for 5 years) has somehow been dis-associated from my Apple ID, how do I find out what Apple ID it is associated with?
    Thanks gang for trying to help me unravel a mystery.
    Dave
    PS- Here's an Apple Tech article on iTunes associations, but it doesn't really go beyond what we've discussed above:
    http://support.apple.com/kb/HT4627

  • RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

    Hi, all,
    Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
    This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
    This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
    As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
    Any advice you could give would be welcome.

    Hi there
    Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
    Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
    The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
    Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • Tried to instal an auto update this morning and I got an error message

    I got the usual auto update message this mortning, so I clicked install!
    Now all I get is the error messages.... Program:C\program File(x86)iTunes\iTuneshelper.exe
                                                           Error 6034
    Then I get another popped up stating. Windoes error 7
                                                           Windows error 1114
    I deleted iTunes and started to reinstall :-(
    Half way through I get an error message saying something about unable to instigate Mobile device (or simnilar)
    Eventually, after clicking twice to retry and getting the same message, I clicked ignore???
    Now each time I try to open iTunes I get the two messages reappear in quick succession???
    I tried to 'ring' support... what a flippin' joke?
    Even though it related to me PC I was asked to imput my device serial No.???
    I did so, went through their process to call... and eventuall got told (by message), that they couldn't help me????????
    I went through the same process.... 'Welcome back' the message said.... still the same outcome????
    Why can't I call to speak to some-one???????
    Help me some-one.... PLEASE!!!!

    Hello, trevor@infinity. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • Error message "auto duplexer is not installed" after a paper jam was removed on my epson artisan 837.

    I print from a Macbook Pro (April '09) OSX 10.9.3 to an Epson Artisan 837 duplex all-in-one which has been functioning perfectly for some time. The other day while duplex printing I got a vague error message to the effect "printer error, turn off machine and power back on." I repeated that process several times waiting a period of time and/or doing it speedily. I even unplugged the printer from its outlet, turned off the computer, waited overnight and tried again, all to no avail. I then found the back tray had a paper jam which I removed and replaced the tray.  Since this ordeal I have NOT been able to use the duplex function. After apple's air-print, an Epson Customer Service person told me to add a printer in Systems, printer preferences and to simply add in the same printer (only one i have) but choose not to have it be air-print. This worked even though it gave me Epson Artisan 837 and Epson Artisan 837II (the first with air-print the second not). I must be missing some step this time, however, because although I now have essentially 2 printer choices, the Epson II has duplex printing choices grayed out and gives me the error message "auto duplexer is not installed." Sorry to make this so long, but can anyone help me with this problem?

    Thank you. Those are beautifully written procedures.
    Looks like it's a network issue. I reach the step, "Adding a printer using the wizard":
    You must enter the following URL, you must use the Queue Name you noted down earlier
    http://<IP address of Mac>:631/printers/Queue Name
    which I do, entering
    http://192.168.0.4:631/printers/MP830
    and I get the following error:
    "Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server."
    And then I am toast!
    Using the other procedure, I simply don't see the Mac's printers in the Bonjour Wizard's "Browse for Bonjour Printers" window.
    Not sure where to go from here -- any ideas?
    The Mac's IP (set via DHCP) is 192.168.0.4, subnet mask 255.255.255.0. The PC is 192.168.0.5, I can't find the subnet mask.
    Pretty sure it's a network config issue, especially isnce I can Bonjour to my other Mac.
    TIA...

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • HT5654 iTunes auto update downloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried uninstalling and downloading/installing again to no avail. Any clues?

    iTunes auto-update dowloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried unistalling and downloading/installing again to no avail.  Any clues?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99269)

  • Resolve error in Firefox 7.0.1 - executing an auto log-on produces the following error message: XULRunner-Couldn't load XRE function?

    Following an upgrade from Firefox 6.0.2 to Firefox 7.0, this error appeared in response to accessing Firefox! Executing an auto log-on produces the following error message: XULRunner-Couldn't load XRE functions.
    Also, following an upgrade from V7.0 to V7.0.1, the same error occurs.
    Following the In-place Upgrade from Vista Home Premium x64 to Win 7 HP x64, the RoboForm2Go taskbar is no longer on the program display page, rather it is confined to the bottom taskbar. This is likely due to a reported incompatibility between Roboform2Go and Firefox v7.0 (and 7.0.1).
    Further, there was a failure of RoboForm2Go Log-ins from the bottom quick-start taskbar.

    See [[/questions/880170]]

  • Avoid blank page with Auto TR error message in PDF

    Experts,
    We have forwarded auto TO error message from SAP inbox (SBWP) to outlook email.We made the settings to convert all messages to be converted into PDF while receiving into outlook inbox.For some reason, i am getting the first page as blank with error message.why is this happening? Please suggest
    thanks in advance

    Hi Patrick,
    It should work. You know the id of the specific area, you know what string to search for in order to condition the appearance of the new message.
    Kind Regards,
    Alex

  • After auto update recently, norton internet security won't work. error message:windows cannot access specified path...you may not have appropriate permissions to access item

    Firefox did an auto update and since then I cannot open/run Norton Internet Security. It won't even let me update it or re-install it. I get an error message stating Windows cannot find the specified path. You may not have appropriate permissions to access this.

    Hi
    Some required information are needed for us to help you.
    Hi NabeelOmer,
    We wonder if you have taken any action such as system restore after this issue occurred.
    You might also try this command to restore your access control list.
    Run this command to navigate to the drive letter, example is D
    D:
    To reset all permissions, run this command
    icacls * /reset /t /c /q
    Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
    Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
    Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
    How to: Repair Visual Studio
    https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
    Regards
    D. Wu

  • YDBN - Extract Auto Payment: error message at spool file

    Hi,
    I run YDBN, Extract Auto Payment, and there is an error message at spool file as follows:
    WARNING  ##################
       Please check the DBERROR.TXT file     #
    Bene Account Length is too long.        #
    Does anyone know what is this?

    The Y* and Z* namespaces are reserved for end-users.  YDBN is a transaction custom to your site!

  • Pages V5 COULDN'T AUTO-SAVE DOCUMENT error message

    Why am I getting this error message when I attempt to save a document, duplicate a document, move a document--"Couldn't Auto-Save Document" I cannot save the document. I originally opened this document from the server computer to my laptop, made changes on the laptop at remote office and now I cannot save it, even to a new location on the laptop.

    Hi.
    I was just now suddenly afflicted by this problem.
    Have new macbook pro retina - iOS X 10.9.2.
    Everything is up to date.
    Even Pages is up to date. checked it (of course), as soon as I started getting the error message every time I tried to save. Even tried saving or 'exporting' to Word, PDF...still same message.
    Now...I recall that any time an app is 'acting up' (i.e. not responding the way it should)...it usually means that it either needs updating, or it has some sort of 'bug' to it.
    If it needs updating...then simply update it. I checked that option...and got message that Pages is indeed up to date.
    So...opted to simply 'force quit' pages (as well as quit many other still-open apps that I wasn't using at the moment...to try to cut down on excess memory being used...thinking that may be part of the problem.
    Also...thought that maybe my hard disk was getting rather full...so opted also to move all my music, movies & pictures to an external hard disk to free up internal storage space (by eventually deleting all after first backing up to external hard disk)...and then of course finally freeing up all space by emptying the trash.
    Then...after force quitting pages (and all other non-used apps at the time)...and still before completing the transfer of all those heavy files to an external hard disk...then I re-opened pages to test it...and 'WHOALA!"...it worked just fine!!!
    So...it seems that this was the solution...at least for me at this moment...to simply force quit the renegade app, and then re-start it.
    If that didn't work, I was going to simply shut down the computer...and do a complete re-start. That is another option that often times gives a new look to life for apps which are acting up.
    OK...just thought to put in my two cents-worth here.
    Hope this helps someone else.
    Regards,
    Balqees Mohammed.

  • I purchased an album and all of it downloaded except for one song.  after a few auto attempts an error message comes up saying the file is corrupted. how do i get the song i paid for?

    i purchased an album and all of it downloaded except for one song.  after a few auto attempts an error message comes up saying the file is corrupted.  how do i get the song i paid for?
    oh the error msg    error= -100000

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Maybe you are looking for