NSView, Controller and Checkbox setting - flummoxed
Hi all.
I'm working through Hillegrass' xcode book.
I have two copies of BigLetterView (rendering bold, italics and DropShadows), on a window
a AppController. and Three check boxes that correspond to the bold,italics and drop.
I'd like the Checks boxes to reflect/change based on the setting of the current BigLetterView Active.
What's the 'easiest and/or best' way to do this?
thanks for the help.
Ian
ps. Is this hard? It seems like it should be easy.. is it??? thanks again..
Thanks for all the replies.. the response has been awesome..
Here's how I solved this.
I created a global using. The Technique laid out by:
http://www.drobnik.com/touch/2009/05/the-death-of-global-variables/
with that I wrote out the current Selected Views settings
then triggered by:
ps. answer was easy-ish researching the answer HARD !!!
[[NSNotificationCenter defaultCenter] addObserver:self
selector:@selector(viewDidChangeNotification:)
name:@"NSWindowDidUpdateNotification"
object:nil];
I then read the Settings and KVC (key-value-coding) (bound) Binding those to the Checkmarks.
Now I just need to Create a controller that will signal and set the values in the view.
This will more than likely entail a View Controller. sigh...
hope this helps someone..
more later.
Ian
Similar Messages
-
Is it possible to have sorting by group and checkboxes in the same ALV
Hi there,
Does anyone know whether it is possible to have sorting and group on one field in ALV and checkboxes set on another field in ALV?
eg.
Fieldname
===========
Name----
Text
Allowance----
Numeric -> Sort & Group
Verified----
Checkbox
How do I code it if it is possible to have grouping and check box all in one ALV. Meaning I want some data that are the same to merge using sort, while still having the checkbox available for my other field (Verified).
Thanks in advance.
Lawrencehi,
GROUP BY clause is used on database tables with select statement.
sort is used on internal tables.
can u clearly explain y u need group by and sort on the same field.
if u are extracting from dbtable using grou by clause on a field, then no need to sort it again.
if u want sort u can do it by giveing "sort itab by field". thats not a problem.
now coming to check box.instead of using SLIS type field catalog, u use LVC type.
in LVC_S_LAYO, u can fine box_fname.
while defining layout, u declare a variable of type LVC_S_LAYO
AND GIVE BOX_FNAME = internal table field name -
D20 Blue Screen loading Windows 7-64bit using Intel controller and Marvell enabled
Hi, Help,
Hardware:
D20, 4158, Four 500GB Seagate SATA drives configured as a RAID10 1TB virtual disk (partitioned into five logical drives).
Goal:
Recover or repair a degraded RAID array.
I want to be able to launch Windows 7-64bit using the Intel controller and have it access the virtual disk of the degraded RAID array attached to the Marvell controller. Subsequently, I want to use the Marvell MRU utility to repair/recover the situation.
Situation/Issue:
Things ran well for two years and two months until yesterday. Now, when booting I see:
1962: No operating system found. Press F1 to repeat boot sequence.
If I use the Windows 7 installation CD and load the Marvell driver, the attempt to recover the operating system reports that the MBR is corrupt and cannot be repaired.
If I boot with the Marvell controller disabled in the D20 BIOS, using a Windows 7 installation (with Marvell drivers) attached to the Intel controller, everything works except (of course) I cannot access the RAID drives.
If I reboot with the Marvell controller enabled, using the same Windows 7 installation via Intel controller, I see a "Starting Windows" announcement followed by a flash of the blue screen of death.
The BSOD message is unspecific, no error code, just...
"A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen,
restart your computer..."
Additional information:
If I access the Marvell BIOS (ctrl-M) and look at Devices, one of the four Seagate drives has status FREE instead of status ASSIGNED. If I run the Marvell BIOS verify disk utility diagnosic on that FREE status disk, I get a fault error after about 30 minutes of scanning. So, one Seagate disk is sour and somehow the MBR was corrupted at the same time.
History:
Two years ago, during the intial configuration, I could access the Marvell RAID disks from this Intel-controller-booted Windows 7 installation, but my fuzzy memory is that I had to change something in the D20 BIOS, such as the AHCI setting or similar.
Status:
Today, using the Intel controller to boot Windows 7 with the Marvell controller enabled is just BSOD. What am I missing or failing to do or set?
Thank you in advance for any help and ideas.
-John
Solved!
Go to Solution.Update:
I replaced the 500GB Seagate disk with a new 500GB Seagate. I ran the Marvell BIOS verify disk utility on the new disk drive and it passed with no errors. Following the steps given in the Marvell MRU online help, I rebuilt the virtual disk. Upon completion (which took a little more than an hour to complete), I rebooted. Before the Seagate disk went south yesterday, the Marvell virtual disk contained one primary partition (C, and four NTFS drives (D:, E:, F:, and Z. Now it contains three primary NTFS drives (C:, F:, and Z. An extended partition contains D: (an unformatted volume of size 199.30MB) and an unused space of 199.30GB.
Event log:
Looking at the event log, Windows reports that the disk in question raised a warning yesterday. Three messages share the same timestamp (all from mv64xx (a Marvell process):
"Physical disk 16 is plugged out."
"Virtual disk 0 is degraded."
"Physical disk 16 is plugged in."
Eight seconds later, UserPnp logs:
"Driver Management has concluded the process to add Service disk for Device Instance ID SCSI\DISK&VEN_SEAGATE&PROD_ST3500418AS&REV_CC38\5&248BBE23&0&000100 with the following status: 0"
One second later, UserPnp logs:
"Driver Management concluded the process to install driver FileRepository\disk.inf_amd64_neutral_10ce25bbc5a9cc43\disk.inf for Device Instance ID SCSI\DISK&VEN_SEAGATE&PROD_ST3500418AS&REV_CC38\5&248BBE23&0&000100 with the following status: 0x0."
Questions:
Is it possible that UserPnp corrupted the Marvell virtual disk after an intermittent physical disk unplugged/plugged-in event that happened when the Seagate hardware went failed. It looks to me like my D: and E: are toast despite RAID 10.
Any ideas? Is there anyway to recover the Marvell virtual disk configuration to the state prior to the hardware failure? If not, what good is RAID 10?
My apologies for the long posting, but I am an old software guy who does not understand the intricacies of RAID and disk management.
Thank you in advance for any leads toward a solution,
-John -
Upgrading Controller and AP Help
I'm planning on moving from 4.1.185 to 4.2.130 tomorrow late but am having an issue in testing. My original plan was with 3 4404's and one of them being emtpy, have the 3rd running 4.2.130 and just move AP's from one of the older controllers over to it until it was empty. However that doesn't seem to be working. In WCS, my test AP is registered to Controller 1, I set it's primary to Controller 3 and it doesn't do anything. How can I force AP's over to the controller with the new code so they'll get updated? The reason for this is I can't take down the whole Hospital for a period of time while I upgrade a controller and wait (and hope) all of the AP's come back up over a period of time.
First verify that the mobility groups is confiugred with all the mac and ip address of all 3 WLC's. Make sure you can mping from one controller to antoher. Then what you can do is change the name of the primary controller to that of the new upgraded WLC. Now you can either enable ap fallback on the wlc that the ap is on or reset the ap, so when it boots back up it will try to join the new wlc.
-
Dear community,
This is about Motion control in Labview: I try to control a step motor by using a PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2. The problem is 5 Disable LEDS on UMI 7774 board always lit even when I check "enable" on "Motion I/O setting" in configuration of PXI 7350 motion controller. Furthermore, when I start to control step motor, it is not working and I found disable LED on UMI board still lit. I don't know how to solve this problem. Can someone help me to figure out? Thank you in advance!
Hau Nguyen.Dear Community,
I said wrong, 4 disable LEDS on UMI 7774 Board instead of 5 as my previous post. Why nobody help me to solve this problem. I can not turn off disable LEDs on UMI 7774 Board so I can not start the strp motor. Please help me!
Hau Nguyen. -
GigE VIsion Camera IP and Port setting in multicast mode (IMAQdx)
GigE VIsion Camera IP and Port setting in multicast mode (IMAQdx)
Hello, Everybody
I have NI-IMAQdx 3.5.0 , and I have Basler Camera (scA640-74gc) with GigE Vision Interface.
I run that camera in my computer as controller (Multicasting mode) with IP (239.192.0.1)
I detected that camera in another computer (to run it as listener) by LbVIEW .
my problem is
I run the Pylon Viewer from Basler (Monitor mode) after I detected that camera.
it was run successfully (I look to details of that camera it have same IP 239.192.0.1 and the port changed every time when i stop running in controller computer)
from where i can set fixed Port in multicasting mode??????
When I use Pylon Viewer in controlled computer and set the mode to multicast
I should set IP and port , then in listener computer I run Pylone Viewer (monitor mode) I saw same IP and same port which i set it in controller
I need a way in LabVIEW to set Port Number in multicasting mode...How I can do that
Best Regard
AlzhraniHi Alzhrani,
Unfortunately it is a bit more complicated because you would have to use the GVCP protocol and do a register read of a specific register on the camera that stores the multicast UDP port (that IMAQdx programs from the controller). However, this likely requires access to the GigE Vision specification in order to be able to format the messages correctly.
Eric -
VSTS Controller and Agent don't communicate
We are doing an exercise of load testing a website using VSTS 2010 with multiple machines as clients. To do so, we have tried setting up controller and agent in 2 different machines,
Machine1 (Controller) and Machine2 (Agent). When the test is initiated from Machine 1 (This machine has VSTS 2010 installed) , Machine 2 is not providing any load to the test. The tests are configured to run as a service. The
results were same when running the tests as a interactive process instead of a service
To tests the setup of the machines the following tests were conducted
The below services were successfully run from both the machines
Performance logs and Alerts
Performance counter DLL host
Remote registry
Setting the execution method as Remote Execution under Edit
Test Settings > Roles
The agent machine is also getting displayed under Test >
Manage Test Controller; we are able to take the agent machine online
The controller and agent machines were able to communicate using the Typeperf command
When load test is run with this configuration we don’t see any Page Response/Key Indicators in the graph and there are no errors in the test run or in the event viewer although we can see Controller/Agent graph getting generated. During this time, there
were no updates in the database but whenever we ran the test setting with execution method as
Local Execution, the test runs successfully with having transacted to the database.
This configuration was done on our client’s environment where we have McAfee anti-virus running and windows firewall is enabled.
Please let us know how to go forward with this. Is there anything missing in the configuration.Hi Gautam_ap,
Thank you for posting in MSDN forum.
According to your description, it seems that you are trying run load test remotely from VS2010 with test controller and test agent, but the load test run fail remotely.
Based on your issue, could you please share me the detailed error message about you run load test remotely from VS2010 failed?
As far as I know that if we want to run the load test remotely from VS2010,we will need to ensure that the version of the test controller and test agent are same with the VS2010. So please you check if you are install the Test Controller 2010
and Test Agent 2010.
As you said that you have McAfee anti-virus running and windows firewall is enabled, please disable the anti-virus and windows firewall and then check this issue.
Generally, I know that if you want to run automated tests that interact with the desktop, you must set up your agent to run as a process instead of a service. For example, if you want to run a coded UI test remotely using a test controller and test agent,
you must set up your agent to run as a process.
Since you are running the load test remotely from VS IDE with test controller and test agent, so you will not need to run the load test as a interactive process instead of a service.
Therefore, I suggest you could also refer the following MSDN document to check this test controller and test agent install and configure for running load test remotely in the VS2010.
https://msdn.microsoft.com/en-us/library/ff400223(v=vs.100).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
When I use the instrument wizard in LabVIEW 5.0, to indentify a device (Neocera LTC-21 Temperature Controller), I receieve the following error:
Error.
There was an error sending this string.
VISA error code returned was:
-1073807339
Error -1073807339 occured at VISA Read.
Possible reasons:
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
Although, the manual for this instrument states that the response should be a string of characters in the form of "Neocera Model LTC-21 version".
Also, I do not have a driver for this instrument, inspite of checking on the NI Instrument
Divers Network and the company website(www.Neocera.com).
I would truely appreciate if someone can help me.
Thanks,
Kunal.I could not find any drivers for that instrument. You may just have to make your own. As for getting the device to respond, there are a couple of things you can do. If you are using GPIB: First, you might want to just reset the device by turning it on and off. If there are other instruments on the same bus, make sure 2/3 of them have their power on. Try communicating with it through IBIC. Here is a page that will help.
http://www.ni.com/support/gpib/max/ibic.htm
IBIC communicates with the GPIB on a very base driver level and you set everything manually step by step, so you can see where the break down is. Also make sure you are entering the "*IDN?" and all other commands correctly. Check the device manual to see what commands it should respond to and if there ar
e any special settings you might need. If you are doing serial communication, you may want to check to see if you need a null modem cable for it to function. There also may be a dip switch on the device that switches between serial and GPIB communication. -
I have 2 PC's, both fitted with PCI-GPIB cards. One will be the system controller and the other will be a device on the GPIB bus. How do I configure both cards using LabWindows/CVI v7.0 to achieve this ? What commands are used to send and receive the data ?
Hi Pete,
For the controller board you don't really need to do anything. By default the GPIB interface is configured as controller.
The non-controller can be configured in MAX. Right-click on the interface, uncheck the ono-controller box and change the primary address. It is usually a good idea to set these parameters programatically. Use ibpad to set the primary address and ibrsc to release system control.
For the controller you can use a device descriptor (using ibdev) or a board descriptor (ibfind).
You can only open a reference to the non-controller board using ibfind (ibfind("gpib0"), for example). This will open a board reference. You cannot use a device reference because that implies that the board is capable of addressing the bus. On
ly the system controller can.
Here are some links I found on the web on this subject:
Passing GPIB Control -- System Controller vs. Controller In Charge
Tutorial: Programmatic File Transfers over the GPIB
Example: Using a C Program as a GPIB Non-Controller with LabVIEW as the GPIB Controller
Example: Serial Polling Between Two Computers (Controller and Non-controller)
Hope this helps.
DiegoF
National Instruments. -
Test Controller and Test Agents on Azure
Hi everyone,
I am trying to run a Test Controller and Test Agents on Azure and the controller fails when trying to register with TFS. We did set up a VPN and it seems to be working but I saw this on MSDN:
If the On-Premise machines are domain joint, you will need to add an IPSec exemption so that the bidirectional communication can succeed. This can be avoided if you can unjoin the On-premise machine from the domain and join it to a workgroup instead.
I don't know what "domain joint" means but I am wondering about the IPSec exemption. Can anybody explain what this means?
Thanks!
RandyHi Randy,
Do you refer to this article below?
# Hosting TestController and TestAgents on Azure
http://blogs.msdn.com/b/visualstudioalm/archive/2014/01/13/hosting-testcontroller-and-testagents-on-azure.aspx
I'm trying to involve some senior engineers into this issue and it will take some time. Your patience will be greatly appreciated.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Help with wireless controller and VLANs
Hi I'm trying to setup a wireless controller in preparation for a large site go live later this year. I'm struggling to get the controller and the WLAN using the correct VLAN. I want the controller on VLAN 100 and the clients on the WLAN on VLAN 200.
My thought is that I would need a config similar to:
Switchport for wireless controller management port set to trunk VLAN 100 and 200 with no native VLAN set.
The management interface on the controller set to VLAN 100.
A dynamic interface created on VLAN 200.
When setup like this I can get to the controller on its management address but only from VLAN100 not from another VLAN on site or from other sites over the WAN.
I have setup a WLAN which is set to use the dynamic interface on VLAN 200.
I have set the AP to use HREAP and set the native VLAN as 200 and added the dynamic interface into the VLAN mappings
When I connecting a client to the WLAN I get an address on VLAN 100.
The switchport for the AP is set to native VLAN 100 and trunk 200 – this setup works for standalone APs at other sites.
What am I missing?
Also any idea why the management interface address is not routing? The netmask and gateway are set correctly.
Thanks
PaulJust to add to Steve's post... You only need to create a dynamic interface for vlan 200 if you have ap's also in local mode. If your ap's are in H-REAP/FlexConnect mode, you don't need a dynamic interface for vlan 200.
In you H-REAP/FlexConnect ap, you would set the wlan to vlan mapping there and the switchport configuration would be a trunk allowing vlan 100 (im assuming your native vlan for your ap) and vlan 200. You should see something like the following:
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
Ok... i wish i can show my form without letting everyone have axx to it.
But anyway, ive searched and i think i found part of the answer but i am still confused. http://forums.adobe.com/message/2033382#2033382
I have a form created completely. It has radio fields, text fields and checkboxes. I have two problems
One when ppl are typing in the text field area, it seems to lend in with the question, so if not paying attn, u wont know that they answered a question.
Currently i have the stuff set at Myriad Pro size 10.. Thats what i used to type comments and what not.
But when the end user flls out the form, i want it to at least be in bold or something.. Or maybe Times new roman Or something different from the question font itself.
Two.. in checkboxes, the default is X. Thats very light. I need that to be noticeable... So either make em a bod X or a way to increase the size of the tick without increasing the size of the box itself.. I just tried to use the STAR..And its bold enuf, but its small. It would be better if the star was a lil bigger.
Currently i think i have 150 checkboxes and about 50 text area and fields.
I thought about making the text thing rich format, but they cant do that for every field... id rather tdo that by default in the back end of the form itself.
I hope im not sounding confusinfi know the square and circle are a bit ugly - but there is no chance you'll miss them
alternatively try adjusting the size a bit under -size you can take a standard checkboxes size from 10 to 12 without increasing its area for example - select the checkbox-objects-field-size - change to 12 eg - adds a bit of weight
i use squares when i need visual weigh -
for the text - might be worth having a test at setting input field values with a baseline shift -- thats basically make text bigger or smaller than, you guessed it, baseline -- this from the livecycle scripting reference
TextField1.font.baselineShift = "+5pt"; should do it for example --
scripting reference follows --- good luck
""baselineShift
Specifies a positive measurement that shifts a font up from the baseline or a negative measurement that
shifts a font down from the baseline.
Syntax
Reference_Syntax.baselineShift = "0in | measurement"
Type Values
String ● fit (default)
The application scales the image proportionally to the maximum size of the container’s
content region.
● none
The application scales the image to the size of entire container’s content region. This may
result in different scale values being applied to the image's X and Y coordinates.
● actual
The image is rendered using the dimensions stored in the image content. The extent of the
container’s region does not affect the sizing of the image.
● width
The application scales the image proportionally to the width of the container’s content
region. The image might be taller or shorter than the content region.
● height
The application scales the image proportionally to the height of the container’s content
region. The image might be wider or narrower than the content region.
Model Object
Form Model image
Adobe LiveCycle Designer ES Scripting Properties
LiveCycle Designer ES Scripting Reference before 156
Values
Applies to
Version
XFA 2.1
Examples
JavaScript
TextField1.font.baselineShift = "-5pt";
FormCalc
TextField1.font.baselineShift = "-5pt" -
Using a Phidget Motor Controller and attempting to get a feedback loop
Hello! Recently, I aquired a Phidgets 1065 motor controller and a compatible motor with built-in encoder. Currently, I am trying to write a program that allows me to input a position, and the motor moves at a user-specified speed until the encoder reaches that position. However, the original instructions to the Phidget VI's are so vague, I'm not entirely sure how to tackle this problem. Any help would be appreciated!
Thanks!It looks like Phidget has a lot of documentation on its website. This webpage might be helpful to get started: http://www.phidgets.com/docs/1065_User_Guide . This user guide shows how to connect the wires. Notice that both the motor control cables and the encoder cables are connected to the motor controller. I believe that the position control loops are performed on this controller/drive itself.
Phidget also has LabVIEW VIs that you can use to set the motor position. This new position is sent to the motor controler through the USB connection and the motor controller will control the motion to that new target position. See this document to get started with the LabVIEW API http://www.phidgets.com/docs/Language_-_LabVIEW#Quick_Downloads . See this document for more information about each of the Phidget VIs: http://www.phidgets.com/documentation/web/LabVIEWDoc/index.html I believe that you would need to look at the section that talks about the servo control module.
Take care,
Jeremy P.
Applications Engineer
National Instruments -
Does user traffic pass through Controller and Aironet 1030?
Hi All,
I want to beat out some questions that I cannot find exactly guideline in Cisco. I intend to implement 2 Airespace 2000 controller and some 1010s and one 1030 to my main office and branch office. At present, there is a 512kbps WAN link between this two office. So I don't want to let the traffic within the branch office to pass through the WAN link. Therefore, I intend to use the solution that 1 controller stay in main office to serve the 1010s in main office and 1 controller stay in remote office to serve the 1010s in remote office. But the remote site only needs 1 AP, thus I would like to use one 1030 to stay in branch office and 2 controller stay in main office to perform controller's redundancy. I would like to know Does the clients' traffic pass through the link between 1030 and controller as the same as 1010? I does very confuse whether 1030 has this feature because I found some blur instruction of 1030 in Cisco.
Further, if I place one of the controller in remote office, how can I control the APs in remote office to choose the local controller instead of the controller in main office using Layer 3 discovery method? Does any know? Thanks!
Jason,
best regards,Hi Jason,
Hopefully this info will clear this up for you;
Q. Can I install an access point (AP) at a remote office and install a Cisco WLC at my headquarters? Does the Lightweight AP Protocol (LWAPP) work over a WAN?
A. Yes, you can have the WLCs across the WAN from the APs. LWAPP works over a WAN. Use Remote Edge AP (REAP) mode. REAP allows the control of an AP by a remote controller that is connected via a WAN link. Traffic is bridged onto the LAN link locally, which avoids the need to unnecessarily send local traffic over the WAN link. This is precisely one of the greatest advantages of having WLCs in your wireless network.
Note: Not all lightweight APs support REAP. For example, the 1030 AP supports REAP, but the 1010 and 1020 AP do not support REAP. Before you plan to implement REAP, check to determine if the APs support it. Cisco IOS Software APs that have been converted to LWAPP do not support REAP.
Q. I want to set up the Cisco 1030 Lightweight Access Point (AP) with a Cisco WLC in Remote Edge AP (REAP) mode. In this mode, is all wireless traffic tunneled back to the WLC? Additionally, if the AP cannot contact the WLC, what happens to the wireless clients?
A. The 1030 AP tunnels all WLC traffic (control and management traffic) to the WLC via Lightweight AP Protocol (LWAPP). All data traffic stays local to the AP. The 1030 REAP can only reside on a single subnet because it cannot perform IEEE 802.1Q VLAN tagging. As such, traffic on each service set identifier (SSID) terminates on the same subnet on the wired network. So, while wireless traffic may be segmented over the air between SSIDs, user traffic is not separated on the wired side. Access to local network resources is maintained throughout WAN outages.
At times of WAN link outage, all WLANs except the first is decommissioned. Therefore, use WLAN 1 as the primary WLAN and plan security policies accordingly. Cisco recommends that you use a local authentication/encryption method, such as the Wi-Fi Protected Access (WPA) Pre-Shared Key (WPA-PSK), on this first WLAN.
Note: Wired Equivalent Privacy (WEP) suffices, but this method is not recommended because of known security vulnerabilities.
If you use WPA-PSK (or WEP), properly configured users are still able to gain access to local network resources even when the WAN link is down.
From this doc;
http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a008064a991.shtml
Hope this helps!
Rob
Please remember to rate helpful posts..... -
Difference between custom controller and component controller
Hi All,
I am a beginner in CRM SAP .
Please can anyone tell me whats the difference between custom controller and component controller with some scenario.
I am totally baffled.
Thanks in advance.
Regards
ShilpiHi Shilpi,
The main difference between custom and component controller is the role which they play during data transfer.
a) Custom controller is used for data transfer across two views within a component. For that you need to bind view context nodes to custom controller either through wizard or manually by adding the code in CTXT class create_contextnode method:
initial setting for depandant model node
coll_wrapper =
BTADMINH->get_collection_wrapper( ).
TRY.
entity ?= coll_wrapper->get_current( ).
CATCH cx_sy_move_cast_error.
ENDTRY.
IF entity IS BOUND.
BTOpportH->on_new_focus(
focus_bo = entity ).
ENDIF.
b)Component controller is used for data transfer across two views in two different components. For this, we need to define the component usage first and then bind the context nodes in the method-WD_USAGE_INITIALIZE of the Component Controller impl class.
WHEN 'ComponentUsageName'.
iv_usage->bind_context_node(
iv_controller_type = cl_bsp_wd_controller=>co_type_custom
iv_target_node_name = 'ContextNodeName' "#EC NOTEXT
iv_node_2_bind = 'ContextNodeName' ). "#EC NOTEXT
Hope this clears some of your doubts!
Thanks and Regards,
Rohit
P.S-This is valid for CRM 2007.Raghu is also right because Interaction Center is made up of different different components combined together.You have put your question in wrong forum.
Maybe you are looking for
-
Today I tried to update my ThinkVantage System, but the laptop was accidently restarted when ThinkVantage Rescure and Recovery was being updated. After the laptop was restarted, I ran the update program again and the ThinkVantage Rescure and Recovery
-
System error in block parforEach: Exception why is process finished?
Hi everybody, we split a message in BPM. Then we loop the multiline-container element. For each line-item we call a WebService synchrounous. We got a exception branch for system errors. Now we got the following problem: Our produces abount 3000 line-
-
How do I get a popup to appear every time a download finishes?
How do I get a popup to appear every time a single download finishes? I want a big popup window. I want it to interrupt me as I'm watching full screen movies. In otherwords, if I download 100 different files, when the first finishes, I get a popup. S
-
DVDSP won't recognize my blank discs!
I'm using DVDSP 3 and I've recently had a problem where when I try to format, and after I insert a black DVD-R, it gets stuck on the "Please insert acceptable DVD recordable media" window. I'm using Memorex DVD-Rs, which I've used before without a pr
-
Can I increase speed of searches in mail?
It seems to take longer than ever to search through my mail on my new imac core duo. Is the amount of mail a factor? I use an imap account but always copy my mail into my imac. Is it a problem with mail and Rosetta? Anyone know? imac core due Mac O