Number Exit for Document Number

Dear Expert,
                  can anyone tell how to define customer specific number ranges to Document Type. we have standard exit program MCDOKZNR for checking number ranges for document type. do anyone have zprogram for the MCDOKZNR number exit ?.
Thanks & Regards
Bhuwan C Tiwari

Hi Bhuwan,
To define the number ranges for the document types please have a look at the SPRO settings:
SPRO -->Cross -->application components --> SAP Business Partner --> Business Partner --> Basic Settings --> Number Ranges and Groupings --> Define Number Ranges.
Hope this helps.
Thanks,
Pradeep

Similar Messages

  • User Exits for Document Info Record : CV01N in DMS

    Hi Experts
    My scenario is: We have Configured DMS in which new document type created Z01 is for MS word documents. I have assigned default Work Station Application : DOC to Z01 document type.
    But my problem is : while creating Info record : CV01n with Z01 document type during file creation system is showing default Application : DOC, But in help user can select either XL, or PPT instead of DOC.
    My requirement is : I need to restrict : other work station applications to the particular document type, i.e. for Z01 document type - allowed work Station Application is : DOC. System doesnot allow user to select other application instead of DOC.
    Where Can I Restrict ??  Is there any User Exits available to controle this function
    Please help
    Satish Babu

    Hi,
    Try these exits.
    CV000001            Check-in enhancement for document management
    CV110001            DMS: Enhancements for DMS Dialog (FB: CV110)
    CVDS0001            User exits for ALE DMS (DOCMAS)
    Hope this helps u.
    Thanks.

  • User-Exit for document changes (status)

    Hi!
    I'm looking for an user-exit where I can check if the status of the document has been changed. Therefore I found the exit "EXIT_SAPLCV110_004" with the include "ZXCV110U04" which is triggered when a document (transaction CV02N) is saved. The problem is that there is no structure of the document provided so I cannot check the status of it! The interface if this exit is just
    FUNCTION EXIT_SAPLCV110_004.
    ""Lokale Schnittstelle:
    *" CHANGING
    *" REFERENCE(PFX_OKCODE) TYPE SY-UCOMM
    INCLUDE ZXCV110U04 .
    ENDFUNCTION.
    Is there another exit or how can I check if the status has changed for each document?
    Thanks,
    Konrad

    You can code in EXIT_SAPLCV00_001. Write your code in the program  ZXCV001U01. This has DRAW structure valeus and also DRAZ Item details.
    FUNCTION EXIT_SAPLCV00_001.
    ""Lokale Schnittstelle:
    *"       IMPORTING
    *"             VALUE(I_DRAW) LIKE  DRAW STRUCTURE  DRAW OPTIONAL
    *"             VALUE(I_OK_CODE) OPTIONAL
    *"             VALUE(SOURCEPATH) LIKE  DRAW-FILEP OPTIONAL
    *"             VALUE(SOURCEFILE) LIKE  DRAW-FILEP OPTIONAL
    *"             VALUE(TARGETPATH) LIKE  DRAW-FILEP OPTIONAL
    *"             VALUE(TARGETFILE) LIKE  DRAW-FILEP OPTIONAL
    *"       TABLES
    *"              I_INTDRAZ1 STRUCTURE  DRAZ OPTIONAL
    *"              I_INTDRAZ2 STRUCTURE  DRAZ OPTIONAL
    *"       EXCEPTIONS
    *"              ERROR
    INCLUDE ZXCV001U01 .
    ENDFUNCTION.
    Hope this will help you to check the conditions.

  • User-Exit for changing Sales Document Number - Urgent

    Hi Experts ,
                     Please suggest me the <b>User Exit for changing Sales Document Number.</b>
    thanks,
    Jayesh<b></b>

    hi jayesh,
    chech this exit-----EXIT_SAPFV45S_002.
    this exit's description says " Change Sales Document Using Configuration".
    Other available exits are
    SDAPO001            Activating Sourcing Subitem Quantity Propagation
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
    Reward me if useful..........
    Harimanjesh AN

  • User Exit for assignment number check

    Hi SAP GURUS,
    I want to have a cheque in system for not to enter a cheque number twice in assignement field. Which user exit i can use for the cheque payment made thru F-53 OR F-58 OR F110.
    Thanks
    CHEERS
    Edited by: NITIN on Apr 26, 2010 7:50 AM
    Edited by: NITIN on Apr 26, 2010 11:18 AM

    Identification of user EXIT
    1.     Enter T.code for which you want to maintain User exit. For ex : ME51 (Purchase requisition)
    Path:  Status Status Double Clicks on the program NameGo toAttributesNote down development class.
    For Ex : ME51u2014development class/package name is  ME
    2.     Enter T.code : SMODutilities FindEnter Development class/package name Execute
    3.     It shows all the Exit names. Click on Exit Name and click on Functional module name.
    for ex: f-53 having following exits.
    F050S001  FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002  FIDCC1: Change IDoc/do not send
    F050S003  FIDCC2: Change IDoc/do not send
    F050S004  FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005  FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006  FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007  FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001  Balance Sheet Adjustment
    FARC0002  Additional Checks for Archiving MM Vendor Master Data
    FEDI0001  Function Exits for EDI in FI
    RFAVIS01  Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00  Line item display: Checking of selection conditions
    RFKORIEX  Automatic correspondence
    SAPLF051  Workflow for FI (pre-capture, release for payment)
    Thanks
    ANJI

  • How to change number range for document type ?

    Dear All
    Experts
    How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as 
    Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
    Message no. FAGL_LEDGER_CUST093
    I have defined a leading ledger in system too with these settings
    1)     Define ledger for accounting.
    2)     Defining currencies for it.
    3)     Defining ledger group for the same.
    4)     Defining accounting principles
    5)     Assignment of principles to leading ledger.  
    Are there any extra settings required for leading ledger settings?
    I have some doubts those are :-
    How document types defined at ledger level?
    How to define them at leading ledger level?  (Like my case)
    Focus on this will be appreciable.
    Regards,
    Sharvari Joshi.

    hi ,
    The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the  number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
    coming to
    1.How document types defined at ledger level?
    2.How to define them at leading ledger level? (Like my case)
    Ans 1. please try defining document types for entry view in a ledger.
    path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
    upon prompt enter the ledger and go ahead creating the number ranges for the document types.
    Hope this helps.
    Regards
    amrutha

  • User exit for sale order material serial number change

    I am looking for User exit for changing the serial number for the saleorder material va01.

    Hey,
      Check the include program : MV45AFZZ. it will trigger at the of saving the sale order.
    IF SY-TCODE EQ 'VA02' OR SY-TCODE EQ 'VA01'.
    Endif.
    Note : Write your coding inside the IF clause to avoid affecting the other transaction codes.
    Regards,
    Saravanan M

  • Table for document type Number Range interval

    Hi,
    I want to know the number range interval for document type in the production system but I do not have authorisation for SPRO in the prd system.
    Kindly let me know the table name to check this number range interval for the document type.
    Table T003 stores only the number range and not the interval.
    Thanks
    Suresh

    Hi,
    The table which has document types is T003 but the number ranges are stored in a Structure IRDP. The number ranges are maintained directly in the production system.
    regards,
    radhika
    Edited by: kolipara radhika on Aug 25, 2008 6:01 AM

  • User Exit for Purchase Requisition Number Range

    Dear Experts,
    I searched on sdn, i got M06B0003 &M06B0004 this 2 user exit for PR Number range.
    I have activated both User exits but while creating PR is not getting effect of that user exit.
    I have checked by putting Break-point in respective user exit but while saving the PR it should go to that break-point but it not going there aslo.
    And also i have checked user exit MM06E003 but it is for Purchase Order number range.And for PO it is working.
    Please help me to solve this issue.Solution will be appreciated.
    Regards,
    Sanket.

    Hi,
    Sorry that badi will not help try this one ...EXIT_SAPLMEREQ_009 in MEREQ001 where the export parameters is purchase requisition number....
    Thanks,
    Shailaja Ainala.

  • Configure internal number for document in "depreciation run"

    Hi Experts!
    When I execute "Depreciation Run", it notice error:
    Create document number range 03 using internal number assignment
    Message no. AA776
    Diagnosis
    Processing terminated because the document number range 03 for year 2008 was set up with external number assignment.
    System Response
    For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
    Procedure
    Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
    Please tell me the way to configure internal number for document in "depreciation run"
    Thanks & Reguards
    Ngocpt.

    Hi,
    Go to transaction code FBN1
    In the change option go to document range 03.  IF its an external number assignment there is a tick in the box " ext".
    If you want to change it to internal you just have to remove the tick.
    Before doing so please check the document type used fo depreciation  and the corresponding number ranges assigned.
    Hope this helps.
    GU

  • Number Range For Document Type "AB"

    I tried posting in F-01 and got this error: "Number range not maintained for document type AB for the year 2008".Even though i have maintain the number range for AB why it is showing error like this?
    Please Help me to solve this issue..
    Thanks
    Sap Guru
    **Points will be assigned

    Hi,
    Here you are trying to post "Sample documents" for sample document you need to give the no "X2" then Fiscal year, from no and to no..
    No     year      from no           to no
    X2     2008      1                        1000000
    from and to numbers can be given based on availability in system...
    Sample documents are not actual accounting document and they will not have any impact on your financial position, they are just templates and you can use the temletes for actual postings..
    Hope understood.and reward me if you get through..
    Thanks,
    Vasu..

  • BDAI for document number range

    Gurus,
    Whether there is a badi for document number range entry view.
    Regards
    Sachin Patil

    This may happen when you try to create a purchase requisition but then abandon it half way through before saving. In this scenario, the number range is incremented but the document is not saved.  The next time you will see a gap of 1 number.
    Thanks,
    Puneet

  • Generate VICS BOL Number in User Exit For Delivery

    Hello,
    I have been asked to automatically generate a BOL for a delivery based  the Voluntary Interindustry Commerce Solutions (VICS) Association specifications.  However, I am having a difficult time finding the correct user exit in the delivery process. 
    Can any of you SD gurus point me in the right direction?
    Regards, Dean.

    I think I found the exit I needed EXIT_SAPLV56U_004. I was wrong about needing the exit for delivery, the requirement is the shipment.  
    With that said, I think I am on the right path but I was hoping that there was someone who has implemented the VICS Bill of Lading in SAP.  I found that the Handling Units -> External Identification seems to have all of the foundation for generating the BOL per the VICS specification.  However, there has been concern that if that was done, that something could cause an issue with Handling Units. Which we are using to generate labels for shipments.  
    So, has anyone used the Handling Units->External Identification for VICS Bill Of Lading generation? If so, anything I should be concerned about?
    Regards, Dean.

  • User Exits for transaction VF01 before saving the billing document

    Can any one say is there any user exit which exits before saving the billing document since i want to check the net value of the billing with the net value of sales order so that it should not go beyond the total amount specified in sales order.

    J_3RSINV
    SDVFX001  User exit header line in delivery to accounting
    SDVFX002  User exit for A/R line in transfer to accounting
    SDVFX003  User exit cash clearing in transfer to accounting
    SDVFX004  User exit G/L line in transfer to accounting
    SDVFX005  User exit reserves in transfer to accounting
    SDVFX006  User exit tax line in transfer to accounting
    SDVFX007  User exit: Billing plan during transfer to Accounting
    SDVFX008  User exit: Processing of transfer structures SD-FI
    SDVFX009  Billing doc. processing KIDONO (payment reference numbe
    SDVFX010  User exit item table for the customer lines
    SDVFX011  Userexit for the komkcv- and kompcv-structures
    V05I0001  User exits for billing index
    V05N0001  User Exits for Printing Billing Docs. using POR Procedu
    V60A0001  Customer functions in the billing document
    V60P0001  Data provision for additional fields for display in lis
    V61A0001  Customer enhancement: Pricing
    These are the Exits Available in the Package
    Jus try finding which will suffice ur Requirement.
    Regards,
    Mithun

  • Customer Exit for VF01 at Saving of Document

    Hi friends,
    I need a customer exit which will execute just after saving the Billing document number in T-code VF01 and have the data of VBRK and VBRP tables. I am having a list of Exits but which exit should I use, I am not confident.
    The list is as follow.
    Enhancement
    J_3RSINV
    V61A0001                                Customer enhancement: Pricing
    V60P0001                                Data provision for additional fields for display in lists
    V60A0001                                Customer functions in the billing document
    V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
    V05I0001                                User exits for billing index
    SDVFX011                                Userexit for the komkcv- and kompcv-structures
    SDVFX010                                User exit item table for the customer lines
    SDVFX009                                Billing doc. processing KIDONO (payment reference number)
    SDVFX008                                User exit: Processing of transfer structures SD-FI
    SDVFX007                                User exit: Billing plan during transfer to Accounting
    SDVFX006                                User exit tax line in transfer to accounting
    SDVFX005                                User exit reserves in transfer to accounting
    SDVFX004                                User exit G/L line in transfer to accounting
    SDVFX003                                User exit cash clearing in transfer to accounting
    SDVFX002                                User exit for A/R line in transfer to accounting
    SDVFX001                                User exit header line in delivery to accounting
    Business Add-in
    VOR_WA_FAKTURA                          Billing before Goods Issue
    SD_CIN_LV60AU02                         BADI for billing
    Please suggest any suitable way for the solution.
    Thanks in advance.
    Krishan

    hi ,
    keeep break point like break <username> in exit and check ur transaction.
    u will get the exit that is triggered during saving of transaction.
    reward points if hlpful.

Maybe you are looking for