Number of characteristics limit in list mode of BMBC

Hi Experts,
We have a class that contains 232 characteristics,
When we try to display a list view of the selected batches in "Selection result for stock" section we get Message no. 12527: Not all characteristics from selection class XXX are displayed.
Does anyone have an idea how I can change this limitation?
Thanks,
Gil

There is no formal limit, but issues like the amount of RAM and disk space you have can come into play.
Regards
TD

Similar Messages

  • How to limit the number of items that a list control can hold?

    Hi,
    I am using a Flex3 List control for one of my projects.
    I add drag & drop functionality to it, so that i can drag & drop elements from one control to another.
    How to limit the number of items that a list control can hold / can be dropped in a list control ?
    - Sen.

    1. Listen for the dragdrop event on the control you are dragging onto.
    2. check the length of the items in the dataprovider - if it exceeds your maximum override the default drop action with e.preventDefault(); (assuming you used e for the event on the handler).
    Regards,
    Mark.

  • Limit the number of records in result list cartridge

    Hi experts
    I want to use result list cartridge for displaying some products but also want to limit the returned results to some max records.
    Is there any way i can limit the number of results in result list cartridge?
    Thanks

    Results list has a 'recordsPerPage' property that will limit the number of records on the page.
    Are you looking to limit it at some other place?
    HTH,
    Pankaj.

  • Max Number of Characteristics in DIR

    Does anyone know if there is a maximum number of characteristics that can be assigned to a DIR?  If so, what is it?

    Dear Andrew,
    as far as I know there is a limit at 999 characteristics per class. If 999 characteristics are there in a class an error message is raised to inform the user.
    Best regards,
    Christoph

  • Error: "Function or method not supported." when using RF List Mode on NI 5673E

    Hi,
    I am trying to use the RF List Mode in NI RFSG 5673E. I tried running the sample code "RFSG Configuration List Frequency and Power Sweep.vi" but an error would show up:
    "Error: niRFSGCreateConfigurationList.VI <ERR> The LO reported the following error: Function or method not supported." with the error code: BFFA4239. 
    I also tried running other sample codes that contain the Configuration List VI's but the same error appeared. I am using NI RFSG 1.8.5.
    I would really appreciate any help on this. Thanks!

    Hello jdlabrador,
    I setup a 5673E here and tried to run the same example.  I did not encounter an error.
    Other reports I've found pertaining to this error usually involved a large number of steps - there was not enough space on the hardware to accommodate them.  The error text you're seeing is a little different in that it states that the Create Configuration List method isn't supported for the LO.
    Do each of the modules in your 5673E (5450, 5611, 5652) pass a self-test in MAX?  
    Have you associated the 5450 and 5652 with the 5611?
    Could you post a screenshot of the fully-expanded Devices and Interfaces tree from MAX?
    Since RFSG 1.9.5 is available, it may be a good first-step to upgrade to it.  
    Best regards,
    Matthew H.
    Applications Engineer
    National Instruments

  • How to control the number of fields in the Advanced mode in af:query

    Hi,
    How to control the number of fields in the Advanced mode in <af:query>?
    Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
    How do i control the list of fields in ADDFields button?
    Any ideas?
    KR

    You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
    http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

  • List Mode as opposed to the silly 20 per page and 220 app icon limitation?

    Does anyone know of a tweak that would allow all apps to be in a list mode as opposed to taking up so much real estate? On an iPod, I can understand why there are only 20 app icons per page but on an aPad, one could easily have several more, and better yet, a list of several apps could be posted on one page. I already filled up my iPad's 11 page, 220 icon limit.
    Silly restriction, that is, only 220 app icons, and then not making adjustments for the larger screen.
    Any input? Thanks in advance!

    The iPad runs the iPhone and iPod Touch OS.
    Firmware update 4.0 will allow for creating a folder for apps.
    http://www.apple.com/iphone/preview-iphone-os/
    Organize apps into folders with drag-and-drop simplicity. Get faster access to your favorites and browse and manage up to 2160 apps at once — many more than the current limit of 180 apps.

  • Max number of characteristics on query result

    Hi Experts,
    I got an error: "maximum number of characteristics(50) reached (BRAIN 696)" on query result because my query has over than 50 characteristics on rows. How can i solve it?
    Best Regards,
    Pablo
    Edited by: Pablo Moraes on Aug 6, 2009 5:42 PM

    Dear Andrew,
    as far as I know there is a limit at 999 characteristics per class. If 999 characteristics are there in a class an error message is raised to inform the user.
    Best regards,
    Christoph

  • Error: List View Threshold. The number of items in this list exceeds the list view threshold, which is 5000 items.

    Hi, i had created a SharePoint List in cloud ( office 365) using List Template.
    List template contains 12000 items taken as template from SharePoint on Premise.
    I am getting this error message, in SharePoint Online (Office 365)
    The number of items in this list exceeds the list view threshold, which is 5000 items. Tasks that cause excessive server load (such as those involving all list items) are currently prohibited.
    How to resolve it, to get data in my SharePoint list, any help will be appreciated.

    With O365 lists over 5k items are now officially supported but they will have limited behaviour due to the threshold. There are no workarounds or options to increase the threshold either temporarily, for specific users or for the list itself as you have
    with on-prem.
    You'll need to remove enough items to get it below the threshold limit, add indexed columns to support indexed views, then re-add the items again. This article is for 2010 but the section around indexed columns and views is still accurate:
    https://technet.microsoft.com/en-us/library/cc262813(v=office.14).aspx
    It may be possible to add the indexes on your on-prem list where you can increase/avoid the threshold, then re-export the list. That would rely upon the list creation script adding indexes before it uploads items but it's a logical assumption.

  • My current project in the events library has gone into list mode. ie a single clip on the left, one above another, so showing only about 7 clips. how can I get it back into normal horizontal mode

    My  current project in the Events Library has gone into list mode. ie a single clip on the left one above another, so showing only about 7 clips. How can I get it back into normal horizontal mode?

    That's about what it's supposed to look.
    How do You want it to look ?
    a. You can change places by using this
    b. May be You changed this top right symbol of an hard disk ?
    c. or changed the number of frames to be viewed ?
    d. OR - it can (at least for me) be so that You think of how it looks in iPhoto. (To me a very common mistake)
    Yours Bengt W

  • How to delete the number saved in CALL FORWARDING list?

    how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
    he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

    Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
    The image you have uploaded is unable to be displayed.
    Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
    It's advised you call your mobile service provider to further assist with this feature.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • IDOC number is not in the list

    Hi,
    I am creating an inbound delivery using IDOC. The message type is DESADV and basic type is DELVRY01. After I have populated the control and data tables, I processed them using IDOC_WRITE_AND_START_INBOUND. I have generated the IDOC number after executing the program. The problem is, when I go to WE02, the idoc number is not the list. I am not sure if the IDOC I generated is successful or not. Does it have something to do with the FM that I used. I set a custom process code that will call the FM IDOC_INPUT_DESADV1. Please advise. Thanks in advance.
    Lalyn

    Hi Arun,
    Thanks for the reply. But the IDOC number is not in the list and I can't access it WE19. Do you have any other Function module that I can use to process the IDOC in ABAP? The Function module should be the one to call the FM IDOC_INPUT_DESADV1 to create an inbound delivery. That's what I think causes the error. Thanks.
    Lalyn

  • Can you limit the list of AirPlay devices seen on the iPad if multiple devices exist?

    We are setting up a school to use iPads, Apple Tvs and Projectors in classrooms.
    - Teachers are using iPads in classrooms and we are setting up wireless projection using AirPlay.
    - Each classroom has an Airport Express with a unique WiFi name.
    - Each classroom has a projector with an Apple TV mounted on it and each Apple TV has a unique AirPlay name.
    - An iPad and the AppleTV are the only two devices on each classroom’s wifi.
    - When a teacher wants to mirror iPad to the projector, we thought they would just see their own AppleTv (projector) but, I think because the underlying school network is the same in each classroom, the teacher sees every device in the school.
    Question:  If you have multiple AirPlay devices on the same network, can you limit the list that one sees on an iPad?
    And/or: Is there a way to set up the wifi differently so the teacher is not presented with a huge list of devices?

    I wish teachers like you would leave technology you don't understand alone. The fact you were allowed to plug-in "consumer grade" access points into a enterprise network says a lot about your lack of knowledge; next you want to turn all of these low end access points into routers!? Your going configure a unique SSID on every AP setup each device to only connect to that network? Do you have any consent of wireless networks? Management?
    It's teachers like you that bring down a network. Then you insult the very IT staff that work in a very thankless position in which most of their interaction occurs when something doesn't work.

  • Should I be able to drag folders from a stack in list mode?

    I'm unfamiliar with Lion and especially with stacks. Should I be able to drag doc. folders from a stack if it is in list mode? I can't seem to drag anything from the stack. The "About Stacks" help article seems to say that drag and drop should work in stacks. Is there a technique or setting that is not mentioned in the article?  Thanks  Bill

    Not in. I'm trying to take some things out of a doc. stack and trash them.

  • HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

    There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
    I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off.  How can I solve this problem please?

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

Maybe you are looking for