The iTunesSetup.exe was interrupted.

what do i do when this comes up after my download freezes after 99%????? im running windows vista SP2 and i have IE9??

Hi Romano!
Answer to your question.
1. My computer operating system is Windows 8.1K, 64 bit.
2. I purchased my AdobePremierElements11 in July 2, 2013. I have serial number.
3. When I re-installing the AdovePremiereElemments, It was removed automatically.
So there is no the program in the Control Panel/Programs. I checked back directly.
4. My computer was not infected with a virus.
5. In the Local Disk (C:)\Program Files (x86)\Common Files\Adobe\
There is no folder name of the OOBE and OLDOOBE.
Suspicious circumstances.
I tried to install the AdobePremierElements11.
I entered my information( name, country, serial number)
and I started the installation.
But since about 85% proceeded the installation program stopped and computer can't seem to installation.
I had to reboot the computer.
and I have tried to install.
Strangely, my costomer information( name, country, serial number) came floating up in the 'IstallShield Wizard Pop-up Window', even though I do not enter my information.
When I click Next button to continue 'IstallShield Wizard Pop-up Window' say "IstallShield Wizard Completed and The installation wizard was interrupted while installing Adobe Premiere Elements 11. Your system has not been modified. To complete installation at another time, please run setup again. Click Finish to exit the wizard."
So I and finished.
As a result, I could not install the program.
That's all.
Please help me.
Thank you

Similar Messages

HT1926 Error when trying to install iTunes 'iTunesSetup.exe was reported as unsafe.'

Get an error when trying to install iTunes 'iTunesSetup.exe was reported as unsafe.'
Any suggestions for how to fix this?
I am using Windows Vista and IE9.

After using the Windows Installer clean up tool and removing the iTunes 7.0.7.16 install file I was able to update to 7.0.2

Everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? With the options cancel, continue restore and delete back-up??

I upgraded to iOS 5 on my 3GS without any issues but now everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? with the options of cancel, continue restore and delete back-up. what happens if i click delete back up?

I'm not getting the message anymore!
What I did:
1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
2.- Upgraded to iOS 5.0.1
Done!
PS: Maybe upgrading solves the problem without erasing the corrupted backup

Every time I try to download and update my Iphone it says the network connection was interrupted and to check it again.

Every time I try to download and update my Iphone it says the network connection was interrupted and to check it and try again. It says this when I try to update my iPhone AND my iTunes It never lets me upgrade! Can anyone help me?

See Here for
Contact iTunes Customer Service
http://www.apple.com/support/itunes/contact.html
And Here if you need it...
Apple ID Support
http://www.apple.com/support/appleid/contact/

I can't accessed system recovery options after the repairing process was interrupted.

although it's not my PC, i'm still concern about it (it's actually a public computer in our library). I actually tried to repair it using the system recovery options of windows 7 with thinkvantage technoliogies but i interrupt it because maybe someone will caught me and i will be mistakenly be liable. and the result is after i restared it, it restarts over and over again, with BSOD appearing for a split second. i tried to use disable autorestart on system failure feature, and i saw the BSOD. but the real issue is i can't go through the recovery options, only until the part when i'm asked to select a keyboard input method, then the next part is this message: "You must log in to access System Recovery Options. If you are having trouble logging in, please contact your computer administrator for assistance. Click OK to restart the computer." anyway, this is the BSOD says:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical in formation:
*** STOP: 0x00000024 (0x00000000001904, 0xFFFFFA800690D840, 0XFFFFFFFFC0000102, 0x0000000000000000)
I hope this problem will be solved as much as possible. thank you in advance. and i also don't know what model of this Lenovo all-in-one PC is. but i think this is 3318F9U, and its i forgot its BIOS version, and i don't know how to access it. and also, i'm not sure if there's a preloaded Superfish in this all-in-one PC, maybe the vulnerability started it. because i recently read an article regarding the Superfish's vulnerability.

Hello and welcome,
Please remeber that this is a peer-to-peer forum (users helping each other) not the Lenovo support site. There is some Lenovo presence, but if you need urgent support, please try your local support office:
Philippines
THINK-branded products
Tagalog, English
1-800-8908-6454 (GLOBE subscribers), 1-800-1441-0719 (PLDT subscribers)
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Itunessetup.exe download interrupted

Have been using Itunes 10 quite happily but a couple of weeks ago the programme refused to launch so I uninstalled and attempted to re-download.
Despite using two different browsers Explorer 8 and Google Chrome the set up programme appears to download to the point that the file size states 66.1MB out of 66.1MB downloaded but after this it states "interrupted" and will not launch.
I have deleted all the itunes related folders mentioned on other threads which cause problems re-installing but as I can't even download the installer I don't think this is to do with my problem.
I have downloaded 4 or 5 times over the last two weeks and the problem recurs.
I use Windows Vista. Anyone out there experienced this problem ?
Thanks
Robert

there have also been some other unrelated downloads that have stalled.
what were the other downloads? (wondering here if that could give us a heads up on the itunes issue.)

Auto install flash player to the client where the flash.exe was located on serve

Good day!
I created an intranet site for the company and it is on the server, so the staff can view it. My webpage consist of flash for the viewing of images. The problem is the client who can view my webpage has no flash installer or totally no flash installed on their computer. Actually I have a flash.exe or flash installer in my server. I want to happen is when they view my webpage there is a pop up message for the auto install of flash installer and once they click automatically the flash would be installed. I mean the location of installer in the server they can catch? Is it possible?
Honestly, I have no idea about it. I have a lot of idea and questions in my mind on how the client can have the installer through pop up or any way.
Thank you

It is definitely not something you can do with Flash Player; especially when the Player is not even installed on the client side.
You will need to do something with Flash or ActionScript, so you better ask in the Flash or ActionScript forum.

TS3694 While restoring my ipod, my computer shut due to power problem and the restoration process was interrupted in between, now on my ipod i see itunes icon. When i connect to itunes and try to restore again it gives me error 3194 and tried all the step

I cannot restore my ipod due to intrupted restoration due to power out during restoration.

3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
If necessary
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Cant install QuickTimeInstaller.exe or iTunesSetup.exe and IE9 SmartScreen Filter reports the program is not commonly downloaded and is not signed by its author. I run it anyway, but "is not a valid Win32 application". Tried Firefox

I followed the Article TS1406 (recommended solution) on both a Windows 7 OS and an Apple OS, tried Safari and Firefox, tried using 'Upgrade ITunes' button on my old version of iTunes, then uninstalled ITunes, then QuickTime, now can't install either because I'm getting the same error message when I download and choose Run > 'not a valid Win32 application'. On IE9, the SmartScreen Filter returns a warning that the file could harm my computer because it is not commonly downloaded. I tried downloading it from other internet sources, but that's risky, and anyway, it's still causing the same errors. What else is there to try? If I can't find a solution, I can't use my new Iphone 5

It's still pointing to the installers getting damaged during the downloads.
Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Itunessetup.exe wont open

Hello,
I had been using iTunes version 8.2.0 i think and it worked fine with my ipod classic and music etc. when the version 9 update came i tried to update but it always got to about 70% and stop saying "Itunes+Quicktime" has a invalid signature.
I recently got an ipod touch so i needed version 9 to sync my itunes with it. itunes still always got that error when updating though so i uninstalled it and downloaded the new version from the apple website it seemed to download fine but when i went to open it to install. I got a prompt that it doesn't have a valid signature and may be dangerous software am i sure i want to install, i did yes and my computer acted like it was loading but then did nothing.
I have googled and went through all the forums related and have tried all the solutions ive found... empty temp files, temp internet files, restart, download thorugh different internet program, allow through firewall, etc. etc.
I really want my music and movies on my new ipod touch and would really like to listen to my music again if anyone has any advice on what i can do to get my itunes working again please help.
Thank you, Jaggedrock

Hey Paul,
Thanks for the advice and links.. i connected my computer straight to the modem but still get the same problem. From my friends computer i put the itunessetup.exe version 7.1 on a flashdrive and downloaded the newest version from his internet and put it on there also. the version 9 now has a "Itunessetup.exe is not a valid Win32 application" error.
The version 7 though did open good and install, but i cant open it cause my itunes library was created by a later version (8.2, my computers old itunes)
I tried to update now through my router and directly through my modem, but now when it looks for updates i get "The apple software update server could not be found. Check your internet settings and try again" i have internet good on both through my router and direct. Any advice on what to do now to fix it?
Thanks, Jaggedrock
Message was edited by: Jaggedrock

Itunessetup exe

I have had itunes previously installed on this computer, it was working fine until when it said it wasn't installed properly and some files were missing please reinstall. I Uninstalled everything to do with itunes and apple products as it had said on this site i then tried reinstalling but the itunessetup.exe won't unpack/install.
I have downloaded itunes ver 10.0.1 a few times from the apple/itunes website here but it won't unpack to install. I have also tried to do extract files from the itunessetup.exe but it says the file is corrupt.
When i double click the setup file a little bar comes up to show progress of the unpacking but it goes no further then a quarter of the way across.
I have deleted all temporary files like it said somewhere else on this site and still doesn't work.
No error messages come up at all
Message was edited by: Chris_25

can anyone help with this?
I have downloaded itunes numerous times and none of them will work

Itunessetup.exe removal

Yesterday I bought a new laptop with Windows 7. I am not very computer savy and the first time I attempted to install itunes last night I saved the 32 bit version of itunessetup.exe file on my desktop, when i tried to install it, an error message appeared saying i was downloading the 32 bit version and my system required the 64 bit version.
I couldn't worked out how to remove the itunessetup.exe file from my computer so I deleted it from my desktop and then deleted it from the recycle bin.
Was this the best way to remove the file? it was quite large maybe 89MB i don't want it clogging up my memory.
I have since downloaded the correct version of itunes without a problem, although reading other peoples comments I forsee a few further problems!

Was this the best way to remove the file?
Yep, that was perfectly fine. The iTunesSetup.exe is just an installer file (not a program file). So once you've done an install and don't need it any more, you can delete it just like you'd delete (say) a Word document you didn't want to keep a copy of.

ITunesSetup.exe wont start !!!

hi all
i downloaded latest itunes .. 8.2 xx and when i try to run iTunesSetup.exe nothing happens !! i try with options run as administrator and so.. but nothing same think i have try that instalation on sec computer and its working but on mine its not hi dont show eny errors nothing!! i cant install it !! dont know what to do plizzz help !
Windows Vista ultimate sp1 ... can that be a problem ?? orr .. ?? is there some whay i can instal it ..
thx and sorry for bad Eng

Hey Paul,
Thanks for the advice and links.. i connected my computer straight to the modem but still get the same problem. From my friends computer i put the itunessetup.exe version 7.1 on a flashdrive and downloaded the newest version from his internet and put it on there also. the version 9 now has a "Itunessetup.exe is not a valid Win32 application" error.
The version 7 though did open good and install, but i cant open it cause my itunes library was created by a later version (8.2, my computers old itunes)
I tried to update now through my router and directly through my modem, but now when it looks for updates i get "The apple software update server could not be found. Check your internet settings and try again" i have internet good on both through my router and direct. Any advice on what to do now to fix it?
Thanks, Jaggedrock
Message was edited by: Jaggedrock

Cannot locate iTunesSetup.exe

I was having problems accessing the iTunes store so I was told to un-install and re-install 10.
I removed ONLY iTunes and have been trying to re-install but I'm running into a slight problem.
After hitting download I'm given the option to save iTunesSetup.exe
I click Save File.
The Downloads dialog box opens up and says the download has been canceled(I don't click anything to make it do this)
I then click on it to resume downloading.
It downloads completely and states all downloads have been completed.
The iTunesSetup.exe isn't anywhere to be found.
Not on desktop and not in my downloads folder. I've tried searching and nothing has come up.
What am I doing wrong?

Please explain more clearly.
What version of SQLDeveloper; what JDK; and what operating system?
Did you download the version which includes a JDK or not? If it did not include the JDK, you will be prompted to tell SQLDeveloper where the JDK is installed. is this happening? What happens when you do that?

I cannot launch iTunesSetup.exe - unknown publisher

When I open iTunesSetup.exe after downloading it from the website there is warning message that the file does not have a valid digital signature & is from an unknown publisher. This is confirmed when right clicking the file & selecting properties. I have spent 2 hours on the phone with a helpful guy from Apple but have drawn a blank .Firewall has been turned off , Norton 360 removed , internet settings changed , temp file deleted , etc etc .
Norton have said that Microsoft may know what to do . Is anyone else having this problem ? Surely the file on the website cannot be faulty ?

The most common fix for this is to download the iTunesSetup.exe file from another router.
Or, if you are downloading from a wireless connection, try downloading from wired connection.
Here are just 2 examples where this was the fix for other folks
http://discussions.apple.com/thread.jspa?messageID=10652940
http://discussions.apple.com/message.jspa?messageID=11187671#11187671

The iTunesSetup.exe was interrupted.

Similar Messages

Maybe you are looking for