Number range purchase requisitions at storage location level

How can I define a number range for purchase requisitions at storage location level? I have one plant with several storage locations and I want a number range for purchase requisitions per storage location.

what is the background to this request?
I guess that the requestor can easily identify their own requisitions among many.
I dont think that this is necessary with SAP, do not put to much importance in numbers, there are many other options to meet the users requirements.

Similar Messages

Help required !! For MRP at Storage location level

Hi ,
we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
Can anybody guide me -how to achieve that ? Did we miss any configuration?
I tried to maintain scope of planning & getting error for parallel processing .
Do i need to maintain parallel procesing with servers ?
Pls need your input on this. Any help will be highly appreciated .
Thank you in advance.
Regards,
Krish.

Hi Krish,
Go to following IMG path and check out your settings -
IMG>>>Production>>>MRP>>>Master Data>>>>MRP Areas>>>
(1) Activate MRP for MRP Areas -
Is that activated?
(2)Define MRP areas>>>> Do setting s as per Storage Location
Then run MRP.
MRP Areas
In this IMG activity you define whether MRP is to be carried out with MRP areas. In addition, you define the MRP areas for each plant in which you would like to carry out this type of materials requirements planning.
The MRP area represents an organizational unit which carries out materials requirements planning independently. The results of the planning run are displayed specifically for each MRP area. An MRP area can include one or several storage locations of a plant or stock with a subcontractor.
You can assign a material to various MRP areas.
Basically, there are three types of MRP areas:
Plant MRP Area
Initially, the plant MRP area includes the plant with all its storage locations and stock with subcontractors. When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations, as they are now to be planned separately.
MRP Areas for Storage Locations
You can define an MRP area that consists of a particular storage location by creating an MRP area and assigning the storage location to it. Material requirements for this storage location are then planned separately from the rest of the plant. You can also group several storage locations into one MRP area by creating an MRP area and assigning the storage locations. These storage locations are then planned together.
MRP Areas for Subcontractors
You can also define an MRP area for each subcontractor. Using an MRP area, it is possible to plan the components to be provided in subcontracting, by defining an MRP area for each subcontractor and assigning the components to be provided. You can therefore plan the requirements to be provided for these components for one subcontractor separately from the usual requirements.
Up to now, MRP at plant level had been carried out. The various requirements were combined in the planning run and procurement elements were created for these pegged requirements with unknown sources.
The introduction of MRP areas enables you to carry out material requirements planning and know the source of the pegged requirements and to be able to distinguish between them. The source of the pegged requirements can be, for example, production on a particular assembly line or a subcontract order.
Material requirements planning for each MRP area allows you to have specific control over the staging and procurement of important in-house production parts and purchased parts for each shop floor and assembly area.
Hope this will give you more idea about the same.
Satish

Different Batch Classification at storage location level

Dear guru ,
I have tested that i can insert different values of batch classification for the same material and the
same batch number but in different plants.
In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
Thanks.

hi,
check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
Batch classification is not maintained at the storage location level.

Profit centre at storage location level

Hi Experts,
Can we define a profit centre @ storage location level?
My scenario :
The document splitting of FI is activated for the document type of FI and also the profit centre is mandatory entry for any accounting document that will be created so when I am trying to post a MIGO I encounter the error
"Balancing field "Profit Center" in line item 001 not filled"
We have a option of maintaining a profit centre in plant data/storage location but i will be updated in the profit centre field of Costing1 view . But we does not want to upadate in costing view of material master data.
Basically We want the system to determine profit centre based on storage location in Goods reciept transaction .
Helpful Sugestions on this would be helpful & rewarded max .
points.
Regards,
Patil
t

Hi Raju ,
Thanx for the reply.I am Basavarajs Collougues.
Our Enterprise Structure of our Client is as follows
One company code is assigned to one plant and we have treated all the branches across India as Storage locations.Each Branch (Storage Location- MM) is configured as Profit centres in FICO.The goods are procured for a storage location.
By using the functionality of document splitting, the profit center field is made mandatory for all the accounting documents generated in the system. Now we are trying to post a goods receipt against a Purchase Order, the system is giving error "Balancing field "Profit Center" in line item 001 not filled"
The option is there to maintain a profit center at the plant level.But we have several storage locations under the plant and each storage location has to be linked with the particular profit center. So that, while doing goods receipt the system should determine profit centre based on the storage location in purchase orders.
Please suggest on this.
Regards,
SVU123

Using BAPI_MATERIAL_AVAILABILITY for storage-location-level

Hello experts,
To determine the ATP quantity Iu2019m using the function module BAPI_MATERIAL_AVAILABILITY. I need to get the ATP quantity on storage-location-level; for this the following parameters are set:
- PLANT
- MATERIAL
- UNIT
- CHECK_RULE
- STGE_LOC
The result in table WMDVEX is for different storages locations the same, but in transaction CO09 I have different quantities for the storage locations.
How can I determine the ATP quantity on storage-location-level?
Thank you for your hint.
Regards,
Kurt.

Hallo Brad Bohn,
thank you for your suggestion.
Iu2019m using an own rule (as copy of rule A), the own rule donu2019t use purchase orders.
In CO09 I have the following ATP Quanties:
09.09.2009     BStand          1,775     0     259
09.09.2009     LgBest     0001     785     0     459
09.09.2009     LgBest     0002     989     0     452
09.09.2009     LgBest     0003     22     0     20
The function module provides only 259 for each storage location.
There is another function module AVAILABILITY_CHECK. Can this function module also be used to determine ATP quantity?
Thank you & best regards,
Kurt.

Need Inspection lot creation at only one storage location level - QA07

Hi,
I have shelf life expired material at different storage location. When ever i run QA07.System generates inspection lot for all storage location.But I want to process the inspection lot for only one storage location. Please guide me how can we map this reqmnt.
Thanks in advance for your relevent response.
Thanks & Regards
Kundan Kumar

Hi,
Next inspection date is maintained at the batch level, not at the storage location level.
You can suggest the following solutions if it is feasible in your business scenario.
Scenario 1: Batch is inwarded in one storage location"A" & stored for some time, then it is transfered to other storage loactions B & C (like production storage locations).
In this case suggest to transfer the batch to storage loactions B & C just one or two days before the actual consumption of the batch & also keep the opening period in QA07 sufficient days (between 10-15 days), so that the sytem will create the inspection lot in one storage location "A" . Since the batch is still not transfered to B & C, the system will not create inspection lots in B&C.
Scenario 2: Batch is inwarded in all the storage locations with the same batch number.
In this case suggest to inward the same bacth with different batch numbers, keeping the all other characteristic values same
With Best Regards
Vithal

Reg : client level data,plant level data,storage location level data

hi
when we enter the data mm01 we select views.these views are based on cleint level,plant level,storage location level .i want the difference between all the three levels.how do we differentiate.

As per our business process there are one company and in which many plants and storage location are available. In which many materials are available in different plant in different storage location.
As per SAP Standard structure: -
Company >> Company code1 & Company code2... >> Plant 1 & Plant 2 & Plant 3 .... >> Storage location 1 & 2 & 3........
And in all plant and storage location have different data.
Suppose in one plant we do quality testing for material and it may be possible in other plant we not perform quality testing for material. So in this case for same material quality data is different for different plants.
Client Level: - Means data is same for all plant level like Basic data
Plant Level: - Means data is based on plant level like Purchasing, Plant data, Quality data, Accounting view.
Storage location level: - Means data is based on storage location level, for different storage location data will be different like Storage location stock data ..
Due to this you can maintain different data on plant level & storage location level.
Regards,
Mahesh Wagh

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Opening and closing Stock report at Storage location level- date wise

Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
Sam

Do I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam

MC.9 drill down at storage location level

In mc.9 report stock against plant xxxx at storage location drilldown
I see
In total valuated stock is 0
But
at storage location 0040 I see 423.686 as valuated stock
and at storage location 5M06 I see minus 423.686 as valuated stock
Client need to have not stock at plant level.
In total I see 0
But client is bothering about valuate stock he is getting at storage location level.
Thanks,
Kiran

Hi Jurgen,
For plant xxxx there is nil stock in mc.9 report. only I see sloc to sloc transfer of qty. for example sloc 0001 has qty + 100 & sloc 0002 has qty -100.
Finance is asking to user that this + - qty should not show in mc.9 and asking him to get it removed.
What should I suggest to user and finance.
Thanks,
Kiran

Opening and closing balance values at storage location level

Dear all,
I want to know opening and closing balance values and receipts and issue values at storage location level for certain period.
I tried with MB5B, it is not giving value at storage location level, it is giving quantities at storage location level and values at plant level. But requirement is: please see below example:
All values are in USD
Storage location:      1001     1002
Opening Balance:      2000     3000
Receipts:                           1000      2000
Issues:                            2000     3000
Closing Balance:      1000     2000
Please help in this regard (I want value of the stock only, not qty)
Regads,
Veerappa
Edited by: Chinna Veerappa on Jul 27, 2010 5:27 PM
Edited by: Chinna Veerappa on Jul 27, 2010 5:28 PM

vlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
You may have to develope your own ZMB5B program and calculate yourself what is not stored in SAP.

Stock valuation down to Storage location level

Dear all,
System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
Could you please comment if there are tables store these data? Kindly comment.

Hi Afshad Irani,
Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
Could you please advice further?

MCHB,MARD - Stock available at plant level and storage location level

Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
Prasath

Hi prashant,
What do u mean by stock maintained at SL level without batch level. Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level. But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful

Storage Location level ATP check with CRM

Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,

Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

Storage Location Level ATP check through CRM

Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,
Satish

Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

Number range purchase requisitions at storage location level

Similar Messages

Maybe you are looking for