Number ranges in production server

I have created the following number ranges in production server
$$$$     IN     EX
$$C     IN     EX
$$O     IN     EX
$$S     IN     EX
$$$$
EX     00000001     49999999     0             (External checked)
IN     50000000     99999999     50000024
$$O
EX     20000000     22999999     0 (External checked)
$$C
EX     30000000     32999999     0 (External checked)
$$S
EX     40000000     42999999     0 (External checked)
But when I created the org unit it is taking internal and the number is assigned 50000000.
I want all the org units to be 20000000 to 22999999 and external.
How should I do it?

Hi,
For org units if you require the ID to belong to the external number range, you will need to specify the ID of the org unit and then hit CREATE.
If you do not specify the ID, it will take the next number available under the default internal number range which is
$$$$
IN 50000000 99999999 50000024
Hope this helps.
Regards,
Shreyasi

Similar Messages

Transport number ranges to production server of withholding tax

Hi
I have created the number ranges in the development server and saved in one request, but the number ranges are not working in Production system. How can i again transport the same request in production system.
I tried to transport it again but it is showing in grey mode.
Thanks

Number ranges are suggested to be maintained directly in the production client.
Even if you want to transport, Go to SE01 and check that your trans then port include the number range you want to transport.
Regards,
SDNer

Plantwise separate number range for Production order

Hello SAP Expert,
I my project our client require plantwise number range for Production order,order Confirmation for indentifiction purpose .
Please give way to do this.
Thanks in advance.
Regards,
Yogesh.

Hi,
As per standard SAP not possible because Order types are maintain at Client level and not at Plant Level, but as Sukender said use Different Order Types for different Plants.But I guess user will face one problem often during Manual Production / Process Order Creation , and that is if they select wrong order type then face a problem like no Order type dependent Parameter set for required Plant.
Regards,
Dhaval

Number range of product group

Dear all
where we define the number range of product group?
Rgds
Avinash

Hi,
T.Codes:
MC84 - Create Product Group
MC85 - Display Product Group
MC86 - Change Product Group
CX5U1- Product Groups
CX3FF-Copy Product Group
Table:
TF580
I don't think It has number range:
Rewards if helpful.
regards,
Chintan

Number range for Production order

Dear All SAP PP Gurus,
I am new to SAP PP and want to learn about number ranges for production order.
Can anyone tell me step by step procedure for creating & Assigning
number range.
Thanks in advance.
Regards.

Hi MIHIR,
I just chkd the blog spot of MR Siva.
It is very much self expalnatory.
Siva ,pls update more documents in ur blog,it is very much helpful
THNX all

Number Range for production order / Planned order

Number Range for production order / Planned order depends upon what?
Plant, order type, mrp controller??

Dear,
Number Range for production order :- Client Specific assign to the order type You can check in CO82 and OPJH.
Planned order :- Plant specific OPPQ or OMI2. Number ranges for Manual creation - OMI3
Hope clear to you.
Regards,
R.Brahmankar

External number range for products

Hi forum,
I try to upload product in the transaction COMMPR01 with the function: CRMXIF_PRODUCT_MATERIAL_SAVE.
Everything is OK when the product id is not a number, but my client need to give to products a number.
I assign to my category a number range extern, but it doesnt work.
The error when i debug is the next:
A |COM_PRODUCT_SETTINGS|016 |7 : Product ID 7 has an invalid format
Any suggestion or idea about this problem¿?
Thanks in advance,
Mon

Hi Mon,
This might be because of the numeric product ID there. if you see the product Id you are passing is 7, which is a number. But, you convert the same and store to database it will be stored with 0 prefixed. For eg. some thing like 0000000007. Number of 0's depends on the lenght of the field.
To avoid this probably you can suffix the product id (which is a numeral here) with 0's and use them. Probably you can use PACK/UNPACK (eith of these two ABABP statements) to get the required product ID.
This should work. please try.
Best Regards,
Sruendra

External Number range for Production Order with additional logic

Hi gurus,
My requirement is -
I have two products - for my Local and Export
I have made two Order type for local and Export - say LOCL and EXPO
My LOCL order no will start with L and EXPO with E
I can do this with external number range set for each order type..
Now my question is -
My client wants Production Order in this fashion -
L20111------
L is local, 2011 is year, 1 is jan (1 to 9 - Jan to Sept, A - Oct, B- Nov, C - Dec) followed by a serial number
How can we address this in SAP?
Any clues?
Thanks for your suggestion in advance.
Regards,
Srinivas

Hai,
You need to use User exit for this. kindly contact your ABAP team.

Number range for production order is running out! Please help..

Hi,
Our number range for the production order is running out, can anyone please guide me how to extend or create a new number range?
I try to go to CO82, there is no where for me to add a new range. Also, I can't extend continuosly the number range cause the next number already assigned to another order type.
What can I do?
Kindly please help. Thank you.

Hi,
All i would suggest before fixing on the number of digits, look at your past pattern. Estimate the number of orders which you plan to create for a given order type, based on that select the number of digits.
Now if you wish to increase from 7 to 8, its fine, it will not be an issue, once you define the number range, system will throw a message if it overlaps, so you can be rest assured about that. Assign the new number range to the order type & standard SAP will take care of the rest. However if you have any custom reports / developments, just ensure that there is no hard coding to read only 7 digits. Apart from that it should work fine.
Hope the above resolves the issue.
Regards,
Vivek
Added
Please do not amend the existing number range or do any modifications to the same, it will lead to inconsistencies. So create a new range & assign the same to the order types
Edited by: Vivek on Mar 13, 2009 10:43 AM

Transport of Number Range

Hi expert,
Pl. tell me the path for transporting number range for production order from development server->quality ->Production.
Regards
L.B.Yadav

Dear,
You do not transport number ranges in SAP from development to production. Number range will be created as client specific, Therefore no request id is created. U have to create number range in each server.
You need to define the number range in Production server respectively,
1.Goto CO82 , check out in the nubmer range group .If you know your order type (PP01-Std PO type) which have assinged to a particular plant, then this oredr type will be assinged to Internal or External Number range group .Please check out.
2.Another way is , goto OPJH with the oreder type .Click on the Nuber Range General tab at the bottom.U will find the same Order Type assinged in External or Internal Number Range.
Regards,
R.Brahmankar

Production Order Number Ranges Assignment

Hello
We are facing one problem
We have internal number range for production order.
On creation System took few orders in Sequence and few it skipts and then it goes back to seq again
1st it created 1-9
then it created from 21 -26
then it created 10-15
again from 27
Request you to let me kno how we can get it sequential.
In SNUM buffer is maintained as 20.
Thanks N Regards,
Hitendra Dwivedi

Dear
This is because of user buffer, which system will allocate the number from numer range to each user so that there will not be any problem during saving, This is done by basis person. Just discuss with basis consumtant if you want to reduce the gap from one order to other.
This is not a bug, this is standard. Reason for this is the buffering of number range. You can find explaination about this bahvoir in SAP note 62077, this note descripe the behavoir in general. SAP note 456777 descripe the behavoir once again for production and process orders.
Check the above notes and explore
Regards
JH

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

Number range for different order types

hi
pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
thanks and regards

Dear ,
Goto CO82 ,
1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
Revery back if u need any help
Regards
JH

Number range transport problem in Internal orders

Hi,
I created new internal order type in KOT2_OPA t. code and at the time of saving it is asking number range. so i assigned one number range interval to the order type and saved the application in development server and noted down the request number. i released the request to the Testing and Quality server. in that it is not showing the number range in quality server. What i have to do. Does i have to do any configuration for the moving of number ranges to testing from development. please guide me deeply it is very urgent for me.

Hi,
Number range objects can be saved in workbench requests & transported manually.
Thanks
Kishore

Transport of Number range and release proceure and split valuation

Dear Gurus,
Can we transport number ranges from PRD server to Quality Server?
Also, how will we trasport split valuation and release procedure?
Kindly suggest..

Hi
Number ranges you have to create directly as it is not transportable.
For release Strategy details, all your Release config details are transported Except for the below details
1. Characteristics & values assigned to it ( master data)
2. Class & assigned characteristics to it (master data)
3. Values/ranges inside the Release strategies ( classification details).
These three details are to be recreated/assigned in the client you intend to work upon.
Regards
SAM

Number ranges in production server

Similar Messages

Maybe you are looking for