Numbers 09 question - right cell border mysteriously gone

I added some additional cells to the columns in an existing spreadsheet (by dragging the symbol at the right of the bottom cell).
I then noticed that the right border of a series of the cells in one column is invisible, for no apparent reason that I can see.
In the screenshot, you can see that Jan. 9-23 with the middle border missing. They appear to have merged cells. Yet they are still separate, as the selection on Jan. 12 shows. All these should look like the ones above and below.
http://i623.photobucket.com/albums/tt320/_dash/ColumnBorderLost_zpscd6f287c.png
In the inspector, I tried comparing the settings for Jan. 8 and 9, but could see no difference that would explain the missing right border.

I think you were looking in the Cell Inspector part of inspector. Select the affected cells, and look at the Table Inspector part - there is a section there for cell borders.
You can also do this directly using the border menus on your toolbar - ask if you want detailed instructions for that.

Similar Messages

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

Cell border with categories not possible?

Several tables in my worksheet. Those without categories... I can format cell borders. Those with categories, no way. Can't select cell borders or apply line effects to a manually-selected cell border. Is there a workaround?

You are right. I also discoverd that .NET has an implementation for this. Well, I hate to resort to .NET but have no choice.

How to create a dashed line for cell border

Hi,
Is anyone know How to apply the style for cell border to get the dotted line in WinRT
In WPF i will get the dotted line for cell border using this way.
<DrawingBrush Viewport="0,0,20,20" ViewportUnits="Absolute" TileMode="Tile">
<DrawingBrush.Drawing>
<DrawingGroup>
<GeometryDrawing Brush="Black">
<GeometryDrawing.Geometry>
<GeometryGroup>
<RectangleGeometry Rect="0,0,50,50" />
<RectangleGeometry Rect="50,50,50,50" />
</GeometryGroup>
</GeometryDrawing.Geometry>
</GeometryDrawing>
</DrawingGroup>
</DrawingBrush.Drawing>
</DrawingBrush>
Thanks in Advance,

check this thread:
http://stackoverflow.com/questions/14673643/windows-store-apps-how-to-draw-a-dashed-line
Fouad Roumieh

What are the lighted numbers on top right of sk2023 k3yboard for?

what are the lighted numbers on top right of sk2023 k3yboard for?
This question was solved.
View Solution.

Hello again redhue,
Thank you for the quick reply!
In addition to the three lights you see above your number pad (on the far left-hand side), are there any other lights illuminated on your keyboard? Is it possible to take a picture of where these lights are, and post them? Otherwise, the lights should indicate specific locks:
The Num Lock
The Cap Lock
The Scroll Lock
In essence, these lights indicate when you have locked any one of these three options.
I hope this helps!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Chapter numbering on the right side

I do not know hot to set up style for Heading1 - it should be my first level for document description and I need to have the numbers on the right side.
Like this: Chapter 1

Hi Ken
I will explain it more in detail.
I am preparing a document for user manual.
I have set up the basic paragraph styles for document.
Heading_1
Heading_2
Heading_3
Heading_4
For Heading_1 I suppose to create numbering with the number form left of that style.
So it should look like this: Chapter 1
Than Chapter 2 and so on.
For TOC suppose to use the same style or a bit modified (maybe a smaller font)
One more question:
What is the difference btw. automatic chapter number and my using of paragraph style (Heading_1), where I have an automatic numbering for that style too?
I will explane idfa

Cell border not appearing in Adobe forms

Hi,
We Placed a button in internal table cell and itu2019s property is set to invisible.
This button is set to visible based on value of other column value in the same row of table.
But border for the cell is not coming when button is invisible.
Note: the button size is equal to cell size and so when we make the button invisible ,the cell border itself is not appearing as the whole cell is invsible.
How make the cell border visible even the button in that cell is invisible.
Please put your suggestions in this regard.
Regards,
Kranti Yamparala.

Hi Kiran,
Please go through the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm
Here the method to hide the toolbar is given. Try passing ABAP_FALSE in method: lr_method_handler->set_hide_toolbars( abap_false ) if it works.
Regards,
Vaibhav

Cell Border Line Weight

I would like to use different Line Weights on spreadsheet cell borders, but no matter what Line Weight I choose from the Accents window, I always get (both visually and printed) the same Line Weight (hairline?) when I set a cell border. Am I missing something?

I didn't enter the system details because the problem appeared on all the (different) systems I tried: iBook G4 (OS X 10.3.8), iMac G4 (OS X 10.3.9), iMac G5 (OS X 10.4.?), AppleWorks 6.2.7 and 6.2.9. I understand the need in general, but since this problem persisted across all these platforms, I thought that it would either be a well-known usage problem or bug (even though my best efforts could find no mention of it).
Thanks for your response.
Pete

In iOS 7 you can still make calls from the locked screen. Just swipe the missed call numbers to the right. Is this a bug?

In iOS 7 you can still make calls from the locked screen. Just swipe the missed call numbers to the right. Is this a bug?

How is it a security breach? You're free to turn off lock screen notifications for the phone app so that no one can do that.... even if they can, they can only call the number that called you... nothing else. (well, except for 900 or whatever the emergency services number is where you are, but that's required by law).

Smartforms - Is it possible to Customize Cell Border In Template in 4.6C

Hi,
In smartforms, i know that Customizing Cell border is possible with node type TEMPLATE in version 6.20
Our system is 4.6C
But there are many differences between 4.6C and 6.20 about SMARTFORMS.
Is there a way to specify custom cell border without "Select Pattern" option with node type TEMPLATE in 4.6C
thanks
ibrahim

Hi,
As you identify there are some large differences between Smartforms in 4.6c and 6.20. So there is no equivalent of the cell-specific borders in 4.6c
Regards,
Nick

Selected Table Cell Border in 1.4.2

Hi All!!
I am facing a problem with JDK 1.4.2_01 & Windows L&F. I am unable to see the yellow border around the selected cell in JTable. Was working fine with 1.4.1_03.
A bug with id: 4674205 was reported with 1.4.0 stating :
" In the Windows Look and Feel, the selected cell in a JTree or JTable is framed with a yellow rectangle. To accurately match the real Windows UI, it should be a black and white dotted rectangle instead. (This was part of bug 4268204,which was marked fixed, but this part hasn't been fixed.) This behavior was fixed for JList, but not JTree or JTable. "
Now it has been fixed and closed.
May be they might have removed setting of yellow border for the selected cell to match with native windows UI.
But selected cell border is very much necessary for my project. Can any one please suggest me a workaround.
With Regards,
LRK

Hi Sai!
Thanks for your reply. It will not be feasible in my application as it already has huge number of tables with some of them already having complex renderers and editors.
I was looking at something which i can set globally so that it will reflect to all of the tables in the application in a particular L&F.
I tried setting
UIManager.getDefaults().put("Table.focusCellHighlightBorder",Color.yellow);
and
UIManager.put("Table.focusCellHighlightBorder",Color.yellow);
But no luck.
Any other inputs are most welcome.
With Regards,
LRK

How do I put page number at the center of the bottom of page one and the rest of the page numbers at top right corner?

How do I put page number at the center of the bottom of page one and the rest of the page numbers at top right corner?

Put a section break at the bottom of page 1
Then insert your page number in the footer of page 1.
Go to page 2 and click in the body of the text;
Inspector > Layout > Section > uncheck Use Previous Headers & Footers > click in Header on page > insert > Page Number
Peter

Opening a Numbers ss to the cells I was last working in, rather than A1

I just transferred a spreadsheet to Numbers from Excel. When I open it, it starts back at cell A:1 when I was last working in CU:15. Is there a way to "save" the spreadsheet so that it will open to the cells I was last working in? So far, I love using Numbers, but this is very inconvenient. Thanks.

CF,
When I Save a Numbers document with a cell Selected and then close the document, the same cell is still selected when I reopen the document. Isn't that what you are asking for? Furthermore, if I have chosen 100% zoom scale, the selected cell is displayed in the same screen position as when it was last saved. What you may be seeing that you don't care for is that if the zoom is other than 100% the table's position in the display window may be different than at the last Save.
Jerry

Siri says she cannot answer questions right now?

When I try to use Siri AT ALL she says: "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while." and if you ask her "why?" she says: " There's something wrong and I can't answer your questions right now. Please try again in a little while."
I JUST GOT THIS PHONE TWO DAYS AGO and its already giving me trouble! Anyone else having this problem or know how to fix it!? The whole point of the 4s is to have Siri and she's refusing to answer my questions! It started last night and still wasn't working this morning so I did "try again in a little while"
Help!

Since--
"Siri uses the processing power of the dual-core A5 chip in iPhone 4S, and it uses 3G and Wi-Fi networks to communicate rapidly with Apple’s data centers." (http://www.apple.com/iphone/features/siri-faq.html)
- I would imagine that if millions of people try to use Siri at the same time as it happened at launch of imatch-- "Due to overwhelming demand, iTunes Match is not accepting new subscriptions at this time. Please check back in an hour."(http://www.readwriteweb.com/archives/apple_launches_itunes_match.php)
- we might expect some kind of overload due to overwhelming demand of Siri as well?
Nonetheless, i had same issue this morning, 8AM eastern time, but fixed it righaway by resetting my phone with Sleep/Wake button and the Home button.

Data field shifting to right cell in excel file

Hi,
I have proxy to file content conversion scenario in which I have one field in which e-mail getting populated.
for some email id coimg correct
in excel file cell
<EMAIL>[email protected]</EMAIL>
but for it is getting shifting to right cell
<EMAIL>[email protected]</EMAIL>
Please suggest

Hi ,
I am doing the Proxy to file contennt conversion in that I have used only fieldSeparator ',' only.
and it is one to one mapping .
some data of coloum B is shifting to A for this I have used mapwithDefault with space and this also is not working?
plz suggest
Regards

Numbers 09 question - right cell border mysteriously gone

Similar Messages

Maybe you are looking for