Numeric, date field data to be in English format

My Characterset on 10g AS & 10gdb, NLS_LANG=ARABIC_KUWAIT.AR8MSWIN1256
In my all arabic screen numerical number & date fields are in arabic. Instead all numeric & date fields should be in English. I have tried settting NLS_LANG=AMERICAN_AMERICA.AR8MSWIN1256 on Application Server. But no use & also by doing this just runtime application is doing flip,,ie from left to right.
i know I can query using below
TO_CHAR(hiredate, 'DD/MON/YYYY', 'nls_date_language = ENGLISH')
Is there any way of doing that at database level, so that all fields of applicaton of type numeric & date are in english.
thanks

In reports I am getting Numeric & date format in English. But only forms all these are in arabic.

Similar Messages

No message for validation error "format", type "date", field "date-expired"

Dear
Guys,
i am getting the following error : ((No message for validation error "format", type "date", field "date-expired"))
When trying to upload adobe connect 7 license to the adobe connect 7 configuration wizard. the problem occurs because my server was install on Arabic Saudi Arabia date format while installation, but if i change the windows date format to US then the problem still occurs, and formatting windows is not possible, could anybody help??
Regards

Thank you for replying,
No i am not on host mode, a have installed it deferent times ago successfully, but the only problem now is that during the installation windows server 2008 the default language, time and date. Was set Arabic Saudi Arabia. And even changing it does not solve the problem, as i mentioned above.

Error while inserting date field data in user nanaged cache group( program)

Hi,
I had usermanaged cachegroup, it is working fine as expected when I insert the record on the ttIsql prompt but when I try to insert the record programmatically (using c language ) it gives me the following error for date field
pthread_kill(??, ??) at 0x90000000217d214
praise(??) at 0x90000000217cc68
raise.raise(??) at 0x900000000050c84
abort() at 0x90000000007ac1c
getExports.getPtrArrayIf() at 0x9000000030a16c0
datetime.sbPatCmp() at 0x9000000033033ec
cacheAgingAPI.hashString() at 0x900000003663eac
unnamed block in ttBdbOraInputValue(0x7000000476efbb0, 0x73000000000073, 0x70000004866dea8, 0x113d8fdf0, 0xfffffffffffd250, 0x113d8fdf8, 0x113c1def0), line 690 in "bdbConvert.c"
ttBdbOraInputValue(0x7000000476efbb0, 0x73000000000073, 0x70000004866dea8, 0x113d8fdf0, 0xfffffffffffd250, 0x113d8fdf8, 0x113c1def0), line 690 in "bdbConvert.c"
bdbBufferStmt(0xf9000000d2845518, 0x834d0, 0x623e8b8, 0x73000000000073, 0x0, 0x0, 0x100000001, 0xfffffffffffd3f0), line 1290 in "bdbTblH.c"
ttBDbTableHInsert(0xf9000000d2845518, 0x834d0, 0x623e8b8, 0x73000000000073, 0x0, 0x113c1def0), line 991 in "bdbTblH.c"
sbTblStorLTupInsert(0x7000000415347c8, 0x700000083668090, 0x0, 0x0, 0xfffffffffffd928, 0x113c1def0), line 15648 in "table.c"
eeDML.sbEeInsertEval(0x70000008385d7c0, 0x7000000833cff98, 0x0, 0x113c1def0), line 5035 in "eeDML.c"
eeDDL.sbEeStmtEval(0x423ac4c8, 0x7000000833cff98, 0x113c1def0), line 12100 in "eeDDL.c"
sbSqlCmdExec(0x70000008385d618, 0x0, 0x0, 0xfffffffffffe670, 0x0, 0x0, 0x113c1def0), line 4052 in "cmdExec.c"
sb_sqlExec(0x113d27f68, 0x0, 0x0, 0xfffffffffffe840, 0x0), line 1470 in "sqlAPI.c"
cxlSqlExecute(0x113d273d0), line 3436 in "cxlsql.c"
stmtExecPart2(0x113d273d0), line 1372 in "vsexec.c"
stmtExecute(0x113d273d0), line 948 in "vsexec.c"
SQLExecDirect(0x113d273d0, 0xfffffffffffeb20, 0xfffffffdfffffffd), line 172 in "sqlexec.c"
Can please guide me.
Regards
S

I have tried but still I am not getting, can u check it out weather we have possibilites to work with DB links or shall i remove it.

Report displays date field on server as timestamp, despite format

I formatted a date field in my report as 01/03/2009.
This looks ok when testing in Crystal Reports.
On the server the date displays as 01/03/2009 12:00:00 AM.
I really want to get rid of the time, as it doesn't fit in the report.
I noticed that in an older report the field of the same date is typed as timestamp. In this case the server display correctly.
The problem is, I cannot figure out how/why the date is typed differently in the 2 reports, e.g. date vs timestamp.
Help!?

Ah, that explains it. Some JDBC drivers handle date field types differently.
Be sure you are using the latest JDBC jars from Oracle and make sure you have the correct Java path in the PATH statement.
Other than that it is likely a limitation of the driver itself.
Try using the native Oracle driver in the database wizard and see if you get the same results.
And as suggested go into the Report Options and see if any of the those switches help. Also right click on the field and select Format and see if those option also help you.
Thank you
Don

HTML DB Validate date field

I create a nondatabase date field (date picker (MM/DD/YYYY) and format mat as MM/DD/YYYY. I want to validate this date field to make sure the entry is valid. mm/DD/YYYY.
I create a validation for the field, but it did not display the error message in the validation, instead it complains that the character is in numeric field with an OK button.
Why?
Is there a Is_date function around?

There are 2 ways to do this
http://htmldb.oracle.com/pls/otn/f?p=24317:239
1. Put readonly="true" in the Form Element attributes for the date picker item. This way the user is forced to select from the date picker calendar and so invalid dates cannot be entered.
2. If user wants to enter the date or select from the calendar, put a validation as Function body returning error text as in http://i1.tinypic.com/rlgi68.jpg
Hope this helps.

How to display date field in ALV in format 'YYYY-MM-DD'?

Hi experts,
I am not getting displayed the date field in ALV in the format 'YYYY-MM-DD' if it is different than my user setting's format (DD.MM.YYYY).
Tried with the edit mask
LVC_S_FCAT-EDIT_MASK = '____-__-__' but it does not work.
I could not find the conversion routine for this. Is it possible to write customer conversion routine?
I have to use DATE field, otherwise if I display this format in CHAR10 field , sorting in ALV does not work for this field.
PLEASE ANY HELP!
Kind regards,
Danijela

Hi,
Use FM FORMAT_DATE_4_OUTPUT.
TYPE-POOLS : slis, KKBLO.
TYPES: BEGIN OF t_data,
       sel     TYPE char1,
       matnr   TYPE matnr,
       bldat   type char10,
       END OF t_data.
DATA: it_tab TYPE STANDARD TABLE OF t_data,
      it_fcat TYPE slis_t_fieldcat_alv.
DATA: wa_tab TYPE t_data,
      wa_fcat TYPE slis_fieldcat_alv,
      wa_layout type SLIS_LAYOUT_ALV.
data: lv_repid    TYPE syrepid.
data : lv_date    type NLEI-IBGDT,
       lv_outdate type RN1DATUM-DATEX,
       lv_format type RN1DATUM-FORMAT value 'YYYY-MM-DD'.
lv_repid = sy-repid.
lv_date = sy-datum.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
    datin         = lv_date
    format        = lv_format
IMPORTING
   DATEX         = lv_outdate.
   move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000001'.
APPEND wa_tab TO it_tab.
lv_date = sy-datum + 1.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
    datin         = lv_date
    format        = lv_format
IMPORTING
   DATEX         = lv_outdate.
   move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000002'.
APPEND wa_tab TO it_tab.
lv_date = sy-datum + 2.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
    datin         = lv_date
    format        = lv_format
IMPORTING
   DATEX         = lv_outdate.
   move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000003'.
APPEND wa_tab TO it_tab.
wa_fcat-fieldname = 'SEL'.
wa_fcat-ref_fieldname = 'XCHPF'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-edit = 'X'.
wa_fcat-checkbox = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR : wa_fcat.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
APPEND wa_fcat TO it_fcat.
CLEAR : wa_fcat.
wa_fcat-fieldname = 'BLDAT'.
wa_fcat-ref_fieldname = 'BLDAT'.
wa_fcat-ref_tabname = 'BKPF'.
APPEND wa_fcat TO it_fcat.
call 'REUSE_ALV_GRID_DISPLAY'' after this
Edited by: Ankur Parab on Oct 1, 2009 2:50 PM
Edited by: Ankur Parab on Oct 1, 2009 2:51 PM

Copy data customer PO and PO date field from quotation to sales order

Hi Friends,
Can you please let me know what copy control settings I need to maintain in order to copy customer PO# and PO date field data in quotation to sales order.
All the data is getting copied from quotation to sales order when I create sales order with reference to quotation but the customer PO no. and PO date is not getting copied.
Can anyone please help.
Regards,
Wasim.

HI
Not sure if this is possible via Customization or not but you can try the user-exits or Routines for the Sales Order program for this
You need to change the include FV45C102 (assuming you have copied standard order and the copy controls). ABAP team should be able to make changes to this routine and achieve your requirement.
In VTAA, after choosing the Source and Target order type and choosing the right Quatation item, check the routine for 'Bus.data/item compl.' and it will be what has been mentioned above.
Please check &Revert
Thanks&Regards
Raghu.k

Inbound Idoc - Date fields not getting saved

Hello,
I have created inbound idoc scenario in SAP. I receive Idoc from non SAP system to SAP system.
then data from IDoc is saved into different tables, for that I have written one function module (attached to process code)
One of the segments in IDoc type has date as a field. It is of type sy-datum.
When I receive Idoc in SAP only date fields are not getting saved in tables.
Is anything specific need to be done for date fields? please advice.

check which format you are getting into sap and make sure you are coverting in into required format.

Date field navigator controll problem

Hi Friends,
Recently i have implemented the one view with the DATE field as a input field, The date field data type is sy-datum.
When i click the date field F4 help, the new pop up will be triggered and shows the date calander. the funcitonality is correct.
Now my use want's restrict the date field navagator with in given period only, For example the date field low value is 01/01/2010 and high value is 31/12/2010, The user want's to see the date field calander betweeen 01/01/2010 and 31/12/2010, user do not want to see the other dates.
Can you please help about the issues. the solution is more helpful for me , if possible please provide the solution.
Thanks & Regards
charan

I noticed the same behaviour. As it turns out, it IS a JHeadstart problem that causes this error to happen. When I generate a UIX paga with both an Advanced Search region and a Quick Search region, this error only happens in the Quick Search region. The Advanced Search region works fine.
Using the FireBug extension for Firefox I noticed this difference between Advanced Search and Quick Search: Advanced Search passes on a reference to the input element into the reference variable and no error is thrown. Quick Search passes on an array of input elements and since an array doesn;t know of the select() method, an error is thrown.
I will create a worksround for this issue by modifying the ADF JavaScript library since I now know where this error happens. Please review this situation and try and solve this.
Thanks a lot in advance,
Wouter van Reeven
AMIS

How do I set blank data to date field in pdf form ?

Dear Sir,
I made PDF form by Acrobat X on Windows PC and then,
read the pdf form by acrobat reader on iPad.
Date field is included in the form.
The Acrobat version is 10.1.6 .
The acrobat reader version is 10.5.0 .
First, I put the wrong date data to the date field.
So, I tried to clear the date field.
I want to put the blank data to the date, but I think
there are no way to put the blank data on iPad
I would like to know how to reset the date data.
If that helps, I tried to the same thing on Android.
I could put blank data to the date field by BS key.
Sincerely,
PV NEXT CO., LTD.
Kiyonobu Matsuo
PVネクスト株式会社

Here is how to clear the Date field on the Ipad.
NOTE: In order for this to work that has to be another TEXT field in the PDF to get the keyboard to pop-up.
Click on Text field (this is to get the regular keyboard on screen)
Click on Date field (date spinner control will show up)
Click on SAME DATE field (spinner control will disapper)
Click on "Reset Field" on top of keyboard (date field will now be empty)
Click any where on PDF that is not another Date field (keyboard will disappear and date field will be empty)
Bingo! your free and clear.

Displaying Customer Date-Fields in SRM 4.0

Hallo,
I want to display a customer date-field (data type DATS) in the basic data of a SC. The Problem is that the field is only displayed, but you can't enter any data. When i change the data type to CHAR you can enter Data in the field.
Can anyone help me, please?
Best regards

Hi,
please try to add the authorization object S_DEVELOP (Role: SAP_EC_BBP_ADMINISTRATOR) to the user, and test again.
Regards
Laszlo

Trouble to use COOIS with date fields

Hi,
Some trouble to use Tcode COOIS, which could provide a lot of information on Production Workflow. When
indicating a date in one of the date fields, datas pulled do not fit with the criteria. For example, if the 08082011
is entered, the report provides informations on postings created the 08082011 and lateru2026 Is there any idea to
fix the problem or to understand why.
Thks
sb
Edited by: STANISLAS BRESIN on Aug 25, 2011 11:46 AM
Edited by: STANISLAS BRESIN on Aug 25, 2011 11:47 AM

Hi,
Please note that In COOIS, yes you donot have creation date / confirmation posting date.
You can sort the production orders wrt basic start dates / finish dates.
Select the basic start date column, rt click and click sort in ascending or descending order
Refer the OSS note Note 434123 and 615206 - Filling and displaying own fields in information system
Regards,
sankaran

Is anyone else having problems with Apertures Date fields?

After experiencing a sysems failure I began restoring my images from backups. I have had no end of problems with Image dates. I have come to the determination that Aperture is NOT using either the "Create Date" or "DateTimeOriginal" as the image "Date" or "Date Created" data if other fields have other dates.
Here is a clip from my image metadata using exiftool:
File Modification Date/Time     : 2012:09:23 19:53:15-04:00
File Access Date/Time           : 2013:01:16 11:34:38-05:00
File Inode Change Date/Time     : 2013:01:16 11:31:32-05:00
Create Date                          : 2006:02:20 11:51:12.10
Date/Time Original              : 2006:02:20 16:51:12.10
Modify Date                          : 2006:02:20 11:51:12.10
And here is what Aperture utilized on import
Date:                               9/23/12 7:53:15 PM EDT
Date Created                         9/23/2012 7:53:15 PM
So Aperture utlized the File Modification Date/Time as the Create Date despite that the fact that the Create Date field is present and is properly formatted in the original image.
According to the Aperture mapping table, this shouldn't be happening.
Now, before someone recommends that I use Aperture's Date Adjust utility - I'm talking about slightly over 30,000 images. Editing images one at a time, or in blocks when you don't know what field Aperture is using as the Create Date would require individual inspection of each image followed by manual adjustment of each image. That approach isn't acceptable.

Hmm ok, let me restate the issue then, I thought I was clear. I could have pointed out in my original post however, that only the EXIF and IPTC date fields were displayed from the metadata dump.
The data set presented in my first post is the EXIF dataset from the file which clearly shows the image was captured by digital camera at
Create Date                          : 2006:02:20 11:51:12.10
Date/Time Original              : 2006:02:20 16:51:12.10
(The delta of 5 hours is the result of Zulu versus local time offset)
But, when I ingested it into Aperture, the import routine utilized the IPTC field
File Modification Date/Time     : 2012:09:23 19:53:15-04:00
which is updated by the OS whenever you move the file around outside of Aperture. (a number of image data fields are updated by the OS - filename for example is another.). This resulted in the image date fields being stamped in Aperture as:
Date:                               9/23/12 7:53:15 PM EDT
Date Created                         9/23/2012 7:53:15 PM
Which obviously came form the File Modification Date/Time field and not (either) the Create Date or Date/Time Original fields.

Validation of a date field

Are there API's to validate a date field which is entered in the format YYYYMMDD
Thanks for the help
Ravish

Hi,
use the fm DATE_CHECK_PLAUSIBILITY.
Siggi

Gui_upload for csv file with numeric n date fields

Hi ,
i searched on net on how to use GUI_UPLOAD for csv files using split function but the spilt function requires that the data type of all fields of the internal table should be character whereas in my case there is a numeric n data field too.So kindly help me how to do it.
One way ppl might suggest that give all the fields as char in the internal n after recieving the data in the internal convert the required fields back to data n numeric n then finally insert to the database but if i have 80 fields u would really dont want to do that as it requires precision to convert it to the same type n length as in the original database for all the fields.

yeah i guess that would be a bit longer if i m having more no of fields (80) compared to ORACLE where this can be done in a shorter way.
SO i shall use 2 internal tables here rite?? i mean first one(with all fields as char) for storing the split function values and the other one (with actual data types) .CAN u plz tell me how to convert or cast from one data type to another n while moving values from 1st internal table to another which way shall i do.
Thanks for ur help n can u suggest if there is any other method for uploading csv also other than this split method n whether this method is better n faster than others.
THANX

Numeric, date field data to be in English format

Similar Messages

Maybe you are looking for