NWDI Short Overvie and Questions

Hello!
Can someone explain me the steps when you work with the SAP NWDI?
I have been surfing in the internet for 3 days and collected some information about the NWDI.
But there are still some questions, I couldn't answer myself.
1) Can you explain me, what a "Track" is? Please give me an example for better understanding.
2) Can you explain me the steps, when you start a new projekt in the NWDI? I don't want to know, where you have to click in the GUI of the NWDS, but I want to know, what exactly happens in the CBS, DTR, CMS and so on....
3) What is the SLD? I found out, that there everything is administrated?
4) What is the diferent between a track and a product?
It would be very nice, if you could answer some of my questions or give me a Link (favored in German) where I can read by myself.

Hi,
Steps are below :
1. Please ask the BASIS team for below details once NWDI is installed.
a) Message Server host and port of J2ee engine and SLD url
Once you will get this information then open your NWDS and put the above information in following way
a) Windows>Preferences and click on SAP J2ee Engine from left menu and select radio button "SAP J2ee Engine is installed on remote host" and put message server host and port number
b) Windows>Preferences and expand Java Development infrastructure > Development Config and put the NWDI url .
Your developer studio is ready to work with NWDI .
Please refer this [NWDI Link|http://wiki.sdn.sap.com/wiki/display/JDI/NWDIRelatedNotesandLinks] and [Components Development with the NWDI|http://help.sap.com/saphelp_nw72/helpdata/en/49/2fe24eb7476b1fe10000000a42189d/content.htm] and
[Reg Track Information|http://help.sap.com/saphelp_nw72/helpdata/en/73/cf61253f4c4536b5047faf6e9e7f71/content.htm]
Hope this helps!!
Thanks & Regards
Vijay
Edited by: VijaySAPEP on Sep 8, 2011 11:45 AM

Similar Messages

Short Circuit AND question (code included)

I have a quick question about the short circuit AND operator...
public class prac1 {
     public static final int aNumber = 19;
     public int age = 53;
     public static void main(String args[]) {
          if ((aNumber == 18) && (aNumber != 10)) {
               System.out.println("You got it!");
}You see I learned that Short Circuit AND means the first expression is evaluated and if it's false the 'code' is executed...
So here is what I am understanding: if((aNumber == 18) already evaluates to false, right, but then I see it as && sees that it's false, but then shouldn't the code execute?
Most likely the case: if((aNumber == 18) already evaluates to false, and because && only evaluates false expressions, and therefore since it's false the code doesn't execute... Am I correct?
Just trying to get the && and || down... Thanks!
Edited by: JavaPWNZ on Jul 2, 2008 5:58 AM

sc3sc3 wrote:
PhHein wrote:
Hi,
a bit confusing, but sort of yes. The && evaluates the first part ((aNumber == 18)) if that is false the following condition is not evaluated any more bacause the whole statement is false.
Try this: String s = null;
if(s != null && s.length() > 0){
System.out.println("Here");
}now try:
String s = null;
if(s != null & s.length() > 0){
System.out.println("Here");
nullpointer :-)As intended :)

One short beep and one 1 beep on hp pavilion media center 8120n

My tower is not booting up when I turn it on. My son took the side off and was going to put more memory in it for me, but in the end he didn't. He put the old memory back in and put the side casing back on. Today, when I turn it on, it has 1 short beep and 1 long beep. It just won't boot up. Can anyone tell me what I need to do to get it back up and running?
This question was solved.
View Solution.

RBurke, welcome to the forum.
The BIOS Beep Code that you are hearing is caused by a memory problem. Here is a guide that will help solve the problem:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07107
You should read the entire page. The beep codes common to HP computers are toward the bottom of the page.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to type comma "," and question "?" without going to "123" sub menu?

How to type comma "," and question "?" without going to "123" sub menu?

I use Comma and question mark frequently at text messaging, email.....using my iPhone 4.
Apparently, there's no short cut for this and I request Apple Support to create a shortcut for "," and "?' so there the Apple device can be more user friendly.
Jackson

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Unlocked old iPhone 3GS for use with pay as you go sim in the UK on vacation. O2 sim works while ph plugged in. Unplugged, works short time and crashes. Sometimes won't even re-boot. Software on phone up to date as far as 3GS goes.

I brought an old IPhone 3GS to the UK on vacation for use with sim card. I had the phone unlocked with approval and instructions from ATT. Store in the UK recommended O2 pay as you go sim which works as long as the phone remains plugged into the wall. Once unplugged, it will work for a short time and then always crashes. Sometimes it will re-boot and crash again and sometimes it will not re-boot at all. One store told me to sync with itunes which I did on my Mac Book. I don't know if the sim is defective or if the software of the 3GS is just not compatible with the sim when on the battery. I have updated the software on the phone as far as it will go. Any suggestions? Maybe the phone is too old to use with the latest pay as you go sim cards. I am disappointed that this phone has not been reliable as a pay as you go and I have had to purchase a UK phone here in order to have a reliable phone.

There is nothing you can do. You bought an illegally unlocked phone off Ebay. A lot of sellers there will tell you it is unlocked but the first time you try to update the operating system it will put the lock back on to the carrier the phone was originally locked to. Sorry but unless the carrier it was locked to will unlock the phone I am afraid you have a very expensive paper weight now. You should have bought it from a reputable dealer instead of ebay.

My complaints and Questions MP4 M4V video files and other complaints

My complaints and Questions MP4 M4V video files and other complaints
I have been scratching my head as to how to fix my problem and I found some answers and some questions along the way. First of all, I have a video that should be correctly formatted for my iPod. Its specs are:
Kind: MPEG-4 video file
Size: 19.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 12:25 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 360 kbps
Video Dimensions: 352x264
Video Codec: H.264
F:\File\AnotherFile\A3rdFile\TheMovieFileInQuestion.mp4
Wow that was a chore. Apple! Let us drag copy and paste our info tabs information so we don’t have to type all this stuff when we are having trouble. **another problem and suggestion** right there.
Ok, back to the problem of the forum.
From what I can see from http://www.apple.com/ipodclassic/specs.html this file falls in line of everything required in order to be able to play on my iPod. It plays in iTunes fine but will NOT sync with my iPod. I get an annoying message that states, “Some of the Songs and videos in your iTunes library, including “BlaBlaBlaiPondFixYourJunkBlaBlaBla”, were not copied to the iPod “My iPod” because they cannot be played on this iPod.” Why oh why can iTunes play this video file but my iPod cant. Especially when the specs on Apple’s website say it can.
So that was bugging me for a LONG time until I found my “Create iPod or iPhone version” option in the “Advanced” heading. Thank goodness this made my files playable on my iPod. Extremely LONG wait though. I know that other programs convert it in ½ the time. But times not to important as long as it gets done, (would be very convenient if it was faster though **Problem and suggestion**)
Ok, now that I have used the “Create iPod or iPhone version” option it has slowly but surly converted my video. Ok, here is my main problem, the new file which is the result of the conversions information is as follows:
Kind: MPEG-4 video file
Size: 35.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 1:28 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 658 kbps
Video Dimensions: 352x264
Video Codec: H.264
C:\File\WhyIsThisNewFileInMyMusicFolder\TheMovieFileInQuestion.m4v
So basically it has made my file bigger *not a bonus in my book* greatly increased my Bit Rate *another interesting feature*, and I think the biggest change it has changed it from an .mp4 to an m4v.
Why does it need to be an .m4v I could have sworn some of my videos were or are in mp4 which shouldn’t matter anyway because I was under the impression that iPods could play mp4 files. So that’s my biggest complaint and question. Why can my 80GB classic iPod not play my MP4 files and why am I forced to convert them??
This conversion also creates 2 files in iTunes when I am done which is annoying because I have to go into my files info and look to see what file is the mp3 in order to remove it. Very annoying I can open my iPod options and see the files and some are faded (the ones it can not play) why can’t I remove them from that area.Suggestion Apple please make files that cannot be played on my iPod stand out some how for easier cleaning Suggestion. Thank you.
Speaking of cleaning iPods, when I moved my entire library to an external drive I was faced with a terrible problem. “This file could not be found, would you like to locate file”, I was faced with this annoying message at least 600 times. Now I am glad that iTunes has a little “!” mark to show dead links so that you do some minor cleaning, Good Job iTunes No compliant there. However iTunes has no way of selecting all the broken files for major cleaning (like in my case). Going through and deleting over 600 files 1 by 1 is extremely time consuming and annoying. **Suggestion Apple please add more cleaning features for organizing iTunes**.
Ok, speaking of organization now, another problem that appeared when converting my video files was that it put my new videos into the location where I have all my songs (my external hard drive) why can’t it put the new files in the locations of the original file? I have my computer highly organized and my original files were in that drive in that folder for a reason. If I could open my original file and skip the conversion, my iTunes would go to that specific folder to access the file which is fine. But now these new conversion files are elsewhere taking up space and disorganizing my computer. True I can go into the new location and move the files to where I want them (original location) but I don’t think I should have to hunt them down, copy, move, delete ect etc for all these files over and over. Very annoying, time consuming and should be unnecessary. **Suggestion Make file creation and location more customizable, and user friendly, your customers will love you for it**.
Well since I have gotten into Apples iTunes and iPod problems that I have had to face I might as well bring up one or two more problems and suggestions. About a month after purchasing my iPod a sibling bought one as well. His however is way more convenient then mine. I suppose he has a 5th gen. so here is my question: why does he have a search option and I don’t!!!! Why does he get more features every so often and I don’t?! Why can’t Apple write some software for us classic guys which got the iPods going! It’s very annoying when I have to spend more time looking for the song then I spend actually listening to it, when he can pull his up in like 3-6 seconds? I highly doubt the hardware between our iPods is that dissimilar and even if they are why cant software be written for us. **Suggestion treat all your customers good not just the newer ones, and make some more features for the classics like me and my iPod.” We will be grateful for it I promise.
Ok, I am almost done. Let me just recap my questions, I know my post is kind of lengthy.
#1. Why can’t my iPod play MP3 video files? And why do I have to convert to almost all the same settings except changing it from an mp4 to an m4v. according to Apples own site I should be able to play .m4v .mp4 and .mov files!! Note: remember iTunes plays them fine but my iPod will not.
#2. Would be much more convenient to be able to copy the information from the windows in iTunes so that problems and trouble shooting would be much easier. A little check on off options in iTunes advanced settings would be terrific.
#3. Why is the conversion so slow? Please speed it, you have the power. Convenience is the thing that sells products.
#4. Files that cannot be played on the current iPod need to be easier recognized for simpler cleaning.
#5. Also make an easier way to select all dead link files for faster cleaning, deleting, etc. This one is important.
#6. Make a user friendly way to change where my files are going to end up once I convert them for iPod more options and better customizable settings are need.
#7. One of the most important is ADD A SEARCH OPTION. I and we classics will LOVE Apple for it.
For you readers, I apologize for the long post, and any grammatical errors you might find throughout it. These are problems that I have faced with these programs and hardware and I wanted to make sure they got acknowledged and hopefully addressed. Any information about why I cannot play MP4 Video files on my iPod would be the best. If anything in my post gets answered that’s the one I want most. Will save me a lot of hassle.
Thank you all and I look forward to your suggestions and comments. All are welcome and appreciated.
Sincerely,
Bond, James

Was playing with iTunes and thought of another suggestion! Let us play files in iTunes from an iPod! A friend or sibling should be able to plug his iPod into my computer open iTunes and play any of the files there. Many times I have wanted to show a movie clip or video to a friend, and I have the dock so I can do it on my T.V. but play it on their computer in their iTunes forget it. That would be a very nice feature as well so we can watch our movies at maximum size or listen to music on a better sound system, just another suggestion that would be nice. Thanks

Alternating mac face and question mark after i tried to install OS X 10.3

I have a Powerbook G4 and I tried to update my operating sytem from 10.2.8 to 10.3 but it froze. After I restarted it I got an alternating mac face and question mark. It just ejects the CDs I try to put into it except for the installation disk for OS X 10.1.3. When I put that one in a smiling mac computer come up then all this type comes across the screen, something about kernels and panic.
Please help me, I've got a project due soon.

Could someone please help me,
when i open my power book g4, an alternating Mac face and question mark appears, and no matter what I do it is still there.
it only changes when I insert the installtion CD of MAC OS X 10.3, but after the Apple logo appears, the screen went white and sometimes just blue, and it just won't work. Then after restarting, the alternating Mac face and question mark still appear.
i also tried the hardware test, after doing both of the tests, the result is consistently "passed". But after restarting, the same problem happens.
what should i do?
please help me
thanx in advanced

SAP Short Dumps and PCI Compliance

We've run into an issue with our PCI Compliance audit around being able to see unencrypted credit cards in short dump messages in SAP. Has anyone run into this issue?
Only work around I've got at this point is to restrict all access to short dumps and require many documented signoffs before turning on and off access to a short dump. This is pretty cumbersome, and still leaves a hole in my overall security.
We've managed to purge restricted CC data from our XI logging, and done everything right with encryption, but this short dump issue just doesn't seem to have a solution.
Can anyone help? We're on 6.0.
Thanks!

Hi David,
This is an interesting situation you have described. ABAP short-dumps or run-time errors as they are also known as, are unhandled exceptions during program execution. The conditions that cause such exceptions is unknown or cannot be handled at run-time. To help analyze what went wrong with the said program during execution, it is necessary for the dump to contain all possible information including data values passed between programs when the error occurs. Encryption of restricted data values is a program step in itself. If the dump were to occur after this step then of course it would contain encrypted CC info. Unfortunately in your case it exposes restricted CC info because the dump occurs BEFORE this step.
I don't believe there is a way to prevent this from happening -- for the same reason that the program logic does not know at run-time how to "handle" the exception. If occurrences of such dumps is fairly common in your system, you may want to investigate the likely causes -- for example, missing or incorrect customization. Analyzing the short dumps will probably give you a clue. Your customization team may be able to identify a pre-condition that causes this unhandled exception. If this exception can then be handled (via a program change) that returns a meaningful error instead of a short dump you would be able to close the security hole. This however entails modification to SAP standard code. I don't usually recommend such changes, but given the sensitive nature of your data it may be worth consideration.
I personally advocate restricted access to ST22. The steps you have undertaken to enforce this may be cumbersome despite efforts to keep it simple. I suppose that's the price we pay in administering the system. If you have not already done so, you may also want to ensure that short-dumps that contain restricted CC info are not saved (using the "Keep" feature in ST22) for easy retrieval at a later point in time or they are saved, it be available only to 'restricted eyes'. Short-dumps are normally saved in the system for 7 or 14 days (not sure of exact # of days). The bigger challenge in my opinion is: How do you prevent the restricted info from being viewed by the user who during the course of program/transaction execution encounters the said short dump? No amount of security controls around ST22 will mitigate this risk. The only option that remains is program change (as mentioned above). But to get there you first need to know what causes the exception.
Regards.
Ashutosh

Field Short Text and long Text not displayed in SKA1 in Se17

When try to extract chart of account data from SAP using Tcode se17 and table ska1. Short text and G/L acc long text are not displayed where as these are displayed when we use t code se16 and table ska1.
My client want to use specifically se17 for extracting the data.

Vineet,
that's a joke isnt' it ?
se17 is from SAP-Rel 2.1 or s.th.!
all jokes aside - the inclusion of text table (here table skat - to table ska1) is only realized with transcations SE16 and SE16N.
To program this inclusion to se17 is very costly - i think and a modification too!
hope you can persuade your client
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=iwo3sshliihvcradiegqaw%3d%3d">andreas Mann</a>

PDF prints with little boxes and question marks

I prepared a document in Microsoft Publisher 360 and created a pdf with creative cloud.
Looks great and prints great for me.
I emailed it to a few people and it looks great on their screens. However, when they print it,
it comes out with little boxes and question marks.
If I email them the publisher file it is fine.
How I can get them the PDF file without all the odd markings?

You probably used a font that is not on their system and did not embed the font in the PDF when you created it. Don't feel bad. We all have done it. Just make sure to embed your fonts in the Joboptions settings before you recreate the PDF.

Creation of short text and long text?

Hi,
We create short text by using oe_fnd_attachments_pub.create_short_text_document and oe_fnd_attachments_pub.add_attachment API and to create long text we use fnd_documents_pkg.insert_row .
Why is it that we have different approaches for creation of short text and long text?
I know that oe_fnd_attachments_pub.add_attachment is used to attach a short text to some entity,but then why we dont do the same for long text?
Please lemme knw urgently ...
Thanks and Regards
Amar

Thanks for the help,
I looked into the document and i got to know few things as to how short and long text are created, but can u tell when the records are inserted into fnd_attached_documents, because i can see that records are inserted into fnd_attached_short_text and fnd_attached_long_text, fnd_documents but i dont see any insertion into fnd_attached_documents, can u lemme knw how and when it is done?

Short text and number of outline not maintained error in BAPI_ENTRYSHEET_CREATE

Hi Experts,
I am using BAPI BAPI_ENTRYSHEET_CREATE' for creation of service entry sheets.
I passed below data into the respective parameters
Entry Header Sheet -
SHORT_TEXT
THIS IS SAMPLE TEXT
PO_NUMBER
231002130
PO_ITEM
00010
And just executed BAPI, I am able to get the ENTRYSHEET NUMBER.
Next I tried passing below data again
Entry Header Sheet -
SHORT_TEXT
THIS IS SAMPLE TEXT
PO_NUMBER
231002130
PO_ITEM
00010
ENTRYSHEETSERVICES:
QUANTITY
10.000
BASE_UOM
AU
And then executed - I am getting an error saying 'Short text and number of outline not maintained'.
My input file to BAPI contains the structure as PO, Item Number, Short Text for Service Entry sheet and Quantity.
Please suggest if any ideas.
Regards,
Rafi

Hi All,
I resolved this. Please refer screen shots below for solution
Below screen shots show about the data to be passed to BAPI_ENTRYSHEET_CREATE
Regards,
Rafi

Short Text and Long Text for WBS

HI All,
I am working on Interface Project where I need to enter Short description and long text for a WBS with external text.
Let me know if any FM Module is exist for same where I can Put this Short Description and Long Text seprately for a WBS Element.
Regards,
Atul R. Rajmane

Hi Atul,
I think you can enter short description & long text seprately for a WBS while creating entire struture of project in PS only. I don't think other than PS you will be able to enter short & long text for individual WBS.
Regards,
Sandeep

Some problems and questions using OWB

For Igor or anyone who can help me :-)
Hello Igor,
Thanks for all your help concerning my mapping deployment problem! Now its working better ;-)
I used the OWB Runtime Assistant to create a new runtime target schema and i use the owner of this schema as user while logging to OWB.
Now i can create and deploy without problems mappings, tables, functions, procedures, packages, dimensions, views, materialized views, process flows (i have installed the Oracle Workflow Client 2.6.2.0.0 with OWF builder and OWF mailer ).
However I have still some problems and questions :-)
a) After deploying a mapping or process flow i can execute them from OWB Deployment Manager. How can i schedule the execution of a deployed precess without using OWBDM ? (I want to execute a process every day to perform ETL).
b) I think i have a problem deploying cubes. I create a cube in OWB, the validation is OK, the deploment succeds, but if i look with OEMC in the tree in the Warehouse OLAP section no cube is created. Only the fact tabe is created. If i look to the scripts from the Pre Deployment generation results i found DDLs only for TABLE, INDEX, UNIQUE KEY, FOREIGN KEY and ANALYZE object types, meanwhile during a dimension deployment i found also a DDL for the DIMENSION type object. WHY ?
c) If I look in the procedures of the new created OWB Runtime Target Schema I found 3 procedures which are in error and when I try to compile them I receive the following error messages :
- procedure WB_OLAP_LOAD_CUBE
PLS-00201: identifier 'DBMS_AWM.CREATE_AWCUBELOAD_SPEC' must be declared
- procedure WB_OLAP_LOAD_DIMENSION
PLS-00201: identifier 'DBMS_AWM.CREATE_AWDIMLOAD_SPEC' must be declared
- procedure WB_OLAP_LOAD_DIMENSION_GENUK
PLS-00201: identifier 'DBMS_AWM.CREATE_AWDIMLOAD_SPEC' must be declared
How can solve this problem? Is there any link with the fact that the cube is not generated?
d) When I first acces the deployed DIM in the OEMC tree I receive a message saying that the dimension does not have complete metadata as needed for use by Oracle OLAP services (because is created either in an earlier version of Oracle database or it was created by an an other application than OEMC) and OEMC automatically generates the default needed metadata. Is this normal ?
I work in an environment with
- Oracle 9i Database 9.2.0.1.0
- Oracle 9i Client 9.2.0.1.0
- Oracle 9i Warehouse Builder Products 9.2.0.2.8
Best Regards:
Vlad
PS Sorry for my poor English ;-)

Answered in your "Getting RPE-01008 when deploying mappings" post.
Regards:
Igor

NWDI Short Overvie and Questions

Similar Messages

Maybe you are looking for