Short text and number of outline not maintained error in BAPI_ENTRYSHEET_CREATE

Hi Experts,
I am using BAPI BAPI_ENTRYSHEET_CREATE' for creation of service entry sheets.
I passed below data into the respective parameters
Entry Header Sheet -
SHORT_TEXT
THIS IS SAMPLE TEXT
PO_NUMBER
231002130
PO_ITEM
00010
And just executed BAPI, I am able to get the ENTRYSHEET NUMBER.
Next I tried passing below data again
Entry Header Sheet -
SHORT_TEXT
THIS IS SAMPLE TEXT
PO_NUMBER
231002130
PO_ITEM
00010
ENTRYSHEETSERVICES:
QUANTITY
10.000
BASE_UOM
AU
And then executed - I am getting an error saying 'Short text and number of outline not maintained'.
My input file to BAPI contains the structure as PO, Item Number, Short Text for Service Entry sheet and Quantity.
Please suggest if any ideas.
Regards,
Rafi

Hi All,
I resolved this. Please refer screen shots below for solution
Below screen shots show about the data to be passed to BAPI_ENTRYSHEET_CREATE
Regards,
Rafi

Similar Messages

Field Short Text and long Text not displayed in SKA1 in Se17

When try to extract chart of account data from SAP using Tcode se17 and table ska1. Short text and G/L acc long text are not displayed where as these are displayed when we use t code se16 and table ska1.
My client want to use specifically se17 for extracting the data.

Vineet,
that's a joke isnt' it ?
se17 is from SAP-Rel 2.1 or s.th.!
all jokes aside - the inclusion of text table (here table skat - to table ska1) is only realized with transcations SE16 and SE16N.
To program this inclusion to se17 is very costly - i think and a modification too!
hope you can persuade your client
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=iwo3sshliihvcradiegqaw%3d%3d">andreas Mann</a>

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

FM to read CSN short text and Date of its creation

Hello Experts,
I need an function module that takes CSN number as input and returns the short text and date of creation of the CSN. If you know of any such function module then please let me know.
Thanks in advance
Regards,
Prafful

Hi,
use this FM....
BAPI_CUSTOMER_GETDETAIL
Regards,
Siddarth

Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

Hi Gurus,
When I try to capture deemed export license from J1ILIC01 I get this error
The number range is not maintained for Object/Year: J_1ILIC/
I tried to maintain number ranges in SNRO & SNUM there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

Hi
Just check if you have maintained number range for the correct year as shown in error.
Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

The number range is not maintained for Object/Year: J_1ILIC/

Hello,
I am facing the problem as
After Created the No range object j_1ilic for excise bond, for capturing the CT3 form in J1ILIC01 and maintain the required fields in J1ILIC01, following error is occuring
"The number range is not maintained for Object/Year: J_1ILIC/"
Kindly advice on the same
Thanx in advance
Shailesh

Hi,
You will have maintain the Number range for the Lisence for the object J_1ILIC through SNRO.
Regards,
Murali

Creation of short text and long text?

Hi,
We create short text by using oe_fnd_attachments_pub.create_short_text_document and oe_fnd_attachments_pub.add_attachment API and to create long text we use fnd_documents_pkg.insert_row .
Why is it that we have different approaches for creation of short text and long text?
I know that oe_fnd_attachments_pub.add_attachment is used to attach a short text to some entity,but then why we dont do the same for long text?
Please lemme knw urgently ...
Thanks and Regards
Amar

Thanks for the help,
I looked into the document and i got to know few things as to how short and long text are created, but can u tell when the records are inserted into fnd_attached_documents, because i can see that records are inserted into fnd_attached_short_text and fnd_attached_long_text, fnd_documents but i dont see any insertion into fnd_attached_documents, can u lemme knw how and when it is done?

Object Code Short Text,Cause Code Short text and Problem Code Short Text..?

Dear All,
can any one help me in finding of Object Part Code Short text,Problem Code short text and Cause code short text fields....in which table it will be storing/function module to get this...?
Thankx in Advance....

hi,
you want for which object??
all the short text stored in the text table like
T001t ( it starts with T and ends with T )
cheers,
sasi

Item category determination customizing not maintained error in CRM_IC

Hello Solution Manager Gurus
I have configured IC Web Client.. But in service ticket tab i am getting Item category customizing not maintained error. Similarly i dont know where to create SLA information for service ticket in solman system.
Please help me
regards
Naveen

Sure Naveen
I think you have my email id with you
And for the customization guide of Webclient, it is available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
C78: CRM Interaction Center (WebClient)
Hope this will help
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Retention Period Not maintained Error when Archiving

Dear Experts,
i am trying to Archive the Archiving Object(MM_EKKO) but i have got the error below
"Retention Period Not maintained" Error
i tried to read different forums on this issue but am not sure i understand why this error happens.
i appreciate your fast response!
best regards

Hai,
In SPRO - IMG - MM - Purchasing - Define tolerance limit for archiving. In this maintain the residence time 1 & residence time 2 for the Purchasinh doc type & also with item category also.
Define Tolerance Limit for Archiving
In this step, you specify how long external purchasing documents are retained unchanged in the database before being archived.
You can define two time periods, via which you control the archiving of the documents:
Residence time 1 for items without a deletion indicator
Before the deletion indicator is set for a document item, the system checks when the relevant item was last changed. In the process, a change in the PO quantity is taken into account in just the same way as a goods receipt, for example.
The date of the last change is compared with the current date. If no change has been made within the residence time 1 entered , the deletion indicator is set for the item.
Residence time 2 for items with a deletion indicator
For document items for which the deletion indicator was set manually or during the archiving run, the system checks how many days have elapsed since the deletion indicator was set.
The whole document is only archived if:
The deletion indicator has been set for all items of the document
None of the items have been changed during the residence time 2 entered - i.e. the last change is the setting of the deletion
The archived documents are then deleted from the database.

Tax number USA not maintained error in F110 and PMW interface

Dear All,
We are using F110 and creating output file using DMEE. After I run the APP and go to env->pay med->DME Adm i get the message 'No record found' in the TCode FDTA. When I go to Env->pay medi-> display log I get the log giving warning message Tax number USA for company code 1000 is not maintained. In the global setting for the co code no field appears for USA TAX Number even after scrolling down. What is the solution to this problem? Where do we find the field?. Please guide

Dear Vinda,
Please follow:
1 - Enter t-code SE16.
2 - Enter table T001Z.
3 - Enter your Company Code from IN.
4 - Hit Execute - F8.
5 - Clique 'new entry' - F5 (If you cannot, ask for a Basis or use '/h' to clear the process).
6 - Enter your C-code IN, param. type = SAPTIN and Parameter value = 'your required number'.
7 - Save - crtl+s
If you got no entries in T001Z to be able advance, go to OBY6 and fill awhile any field with tec name 'PAVAL'. Go back and execute.
This procedure may not change OBY6 view, anyway try another test to check if table T001Z takes place in F110.
Let me know the results.
Regards
Marssel

"Number Range Customizing is not maintained" error in Claim Advances

Hi All,
If we try to create New claim in Claim Advances It is going to the next page but throwing the following error :
Number Range Customizing is not maintained
Please help.

Hi,
Do one thing
goto tcode HRPBSIN_NMBRNG click up on Change intervals ...........
Then maintan number range screen you will get
over thre select "ADD Intervals" then over thre you need to give the New intervl for number ranges ......
give as "1 99999999999999999999" then select "Insert" and "SAVE"
And check the process again.

Why are the text and graphic elements are not showing on the iPad

I have a slideshow of pictures full bleed on my inDesign document with text and graphics on top of the pictures (not part of the slideshow).
When I preview on the iPad all I can see is the gallery of images?
Is it not possible to put text on top of a slideshow?
Here it is as it appears on InDesign...
...and here as it appears on the iPad...
Any ideas? I'm pretty new at this, but I couldnt find anything in the forums
Many thanks for reading
Richard

They're called overlays for a reason. You'll need to change the text to an MSO as well.
Select it, create a new MSO, set it to play once no delay, no crossfade.
Other choice would be to put the text into each state of the MSO.
Bob

Server hangs and session variable value not maintained.

dear all,
this is exteremetly urgent. i upgraded my tomcat to 4.1.24.but i have problems running the same code which was working earlier, i get null in the value of session variable. and also get the following error
////////////////error got /////////////
Compile failed; see the compiler error output for details.
at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:842)
at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:682)
at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:317)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:370)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext
.java:473)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:190)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:2
95)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:256)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:
2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatche
rValve.java:171)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:22
3)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
:594)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
ssConnection(Http11Protocol.java:392)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java
:565)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:619)
at java.lang.Thread.run(Thread.java:536)
///////////////end of error messsge ////////////
the code where i am getting this message is as follows
<%@ page session="true"%>
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<%@ page import="java.sql.*" %>
<%! // declaring variables
String s = "";
java.sql.ResultSet rs=null;
java.sql.Connection con;
java.sql.Statement stmt=null,stmt1=null;
String username = "";
String password = "";
String Ousername = "";
String Opassword = "";
String changepass="";
String usertype ="",useremail="",EmpName="";
%>
<body>
     <%
     try
     //set session for max of 100 milliseconds
     // session.setMaxInactiveInterval(10000);
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
          stmt = con.createStatement();
          s = "select * from LoginUser";
     username = request.getParameter("LogonId"); //get this through prev. form
     password = request.getParameter("txtPassword");
     out.println(username + " " + password);
     // make explicitly to lower case
     username = username.toLowerCase();
     rs = stmt.executeQuery(s);
                    while(rs.next())
                    //getting data from database
                    Ousername = rs.getString("EmpName");
                    Opassword = rs.getString("Password");
                    useremail = rs.getString("EmailId");
                    usertype = rs.getString("UserType");
                    if(Opassword.equals(password) && Ousername.equals(username)) //found match correct entry
                         changepass = request.getParameter("PasswordNew");
                         if(changepass != null)
                         stmt1 = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_UPDATABLE);
                         s = "update LoginUser set Password = '" + changepass + "' where EmpName = '" + username +"'";
                         out.println(s);
                         stmt1.executeUpdate(s);
                         stmt1.close();
                         if(usertype.equals("User") == false)//ie admin
                         session.setAttribute("username",username);
************************this value not maintained *********************
                         session.setAttribute("useremail",useremail);
                         session.setAttribute("usertype",usertype);
************************this value not maintained *********************
                         //closing connections
                         %>
                              <jsp:forward page= "ComplaintType.jsp" />
                         <%
                         else //user
                         EmpName = username;
                         session.setAttribute("EmpName",EmpName);
                         session.setAttribute("useremail",useremail);
                         //closing connections
                         %>
                         <jsp:forward page="ComplaintCategory.jsp" />
                         <%
                         }//end if
                    }//while loop
                    //first closing connections then forwarding
     %>
                    <jsp:forward page="InvalidLOGIN.jsp" />
                    <%
                    ///rs.close();
                    ////closing
                    //stmt.close();
     // con.close();
     }//try
          catch(Exception ep)
          out.println(ep);
          System.exit(1);
     %>
</BODY>
</HTML>

hi all,
thanx a lot for your help,specially hari52
hari52 strangely enough the code started working,but
now i have another problem
after a while my server hangs or gets shutdown ,a
message is shown as
"java.exe has generated error and will be shutdown"
i know that more connections can be a prob. but i
make sure that connections r closed on each page,also
i am a newbie and do not have the time at present to
learn abt. connection pool ,can this problem be
solved easily?
it would be a great help again on your part,
thanx again,You remove the System.exit(1) line from the code inside the catch block
and try again. That's the reason tomcat getting down. System.exit(1) should not be used inside jsp. it will make the underlaying Servlet Engine to shutdown.

Short Text and Long Text for WBS

HI All,
I am working on Interface Project where I need to enter Short description and long text for a WBS with external text.
Let me know if any FM Module is exist for same where I can Put this Short Description and Long Text seprately for a WBS Element.
Regards,
Atul R. Rajmane

Hi Atul,
I think you can enter short description & long text seprately for a WBS while creating entire struture of project in PS only. I don't think other than PS you will be able to enter short & long text for individual WBS.
Regards,
Sandeep

Short text and number of outline not maintained error in BAPI_ENTRYSHEET_CREATE

Similar Messages

Maybe you are looking for