NWDS connect to several CE systems

Hi,
is it possible to configure more than one CE system in the NetWeaver Developer Studio? I need a convenient way to deploy one applications in different systems. Project import and export always causes problems. Right now it is possible to add more than one system to the web as configuration list in NWDS but only one can really be used.
Thanks in advance.
Regards,
Kevin

Hi Kevin,
On any NWDS Session you can register addition CE Systems for deployment. But after closing the session, NWDS only keeps the default CE System configurations. Next time if you cant to deploy again on a different CE system, you have to register the system again.
Regards,
Yasar

Similar Messages

BWA connection to several BW systems

Hi,
We have a BWA with 3 blades and the BWA is currently connected to only 1 BW system.
We want to connect he same BWA another BW system at the same time so the BWA will connected to 2 BW system.
Is is possible ? Is there any documentation on such installation ?
Is it true that each blade must be dedicated to only 1 BW system ?
Thanks,
Sunny

Hi,
we talking here about a very rare case. The one side is, if it´s really supported by SAP and the other one is if it´s even possible. And yes it is possible to remove/deinstall/deconfigure one blade and reindex all to get only (in your case) 2 blades. So a index has always two parts. I have tried this in my last maintenance and it worked... But we have some more blades left and this was only for the operational time in maintenance not a solution over a longer time.
So in my opinion you can do the following (never tested and not recommended, you have to test this on your own risk):
- just shutdown the application on one blade and reindex all of your indexes (you don´t have to deinstall/deconfigure it)
- install a new instance with a different SID and user on this blade
- configure your RFC connection in backend and on BWA Q-instance and index your indizes
It´s just like a normal TREX instance with some special agreements. This is just theoretical, but I don´t know any reason why it shouldn´t work. Just a new instance besides the existing one. This worked on TREX without problems and after reindexing it should work
It´s definitively note supported and you won´t find any official document from SAP.
Regards,
Jens

Connect Portal with several ABAP system

Hi, I need help with a question
I can connect (integrate) the portal system with several ABAP system?
example, The same portal connect with ERP, CRM, BW and SCM.
This is possible??

You simply need to maintain your System Landscape and configure a system alias per each abap backend system as starting point. All the info is available at help.sap.com read below link
Read
http://help.sap.com/saphelp_nw04/helpdata/en/0d/17df3d2cae445ae10000000a11405a/frameset.htm
Regards
Juan

ITouch Firmware Upgrade - Can no longer connect to car audio system

I just upgraded to 3.1.1 last night on my iTouch and can no loger plug in and connect to the audio system on my Infiniti G35x. The iTouch shows that it is connected by the audio system shows that it isn't. I've checked the cables, etc and all is fine and can connect another iPod without any issues. Thoughts...?

This is a known issue that started with the 3.0 release, and it affects several auto manufacturers. I was hoping that 3.1.1 would fix this for my Honda, but no dice. Something changed either in the communication protocol or timing, but whose fault it is seems to depend on how many Apple products you own
You can step back down to the 2.x firmware ... search around for "DFU mode", I did it once and may do it again now that 3.1.1 doesn't solve this.

FF connects to several IP addresses on start-up, how to prevent it from happening?

Hi, I am wondering how I can turn Firefox off from connecting to several IP addresses when it starts up?
I have set Firefox to remember my visited web pages/tabs, but to not load until the tab is chosen.
I have also gone through the advices on the following page:
http://support.mozilla.org/en-US/kb/how-stop-firefox-automatically-making-connections
and have followed it carefully and disabled everything but to no avail.
Also in the about:config I have renamed all Google http(s) links to see if it prevents FF from connecting as some of the IP addresses leads to Google (173.194.32.*), but no success.
A search here on Mozilla or Google gives very little on this particular matter.
I have also disabled all addons but doesn't help.
The only way to prevent FF from connecting with internet is to delete "prefs.js" and "sessionstore.js", but then I loose all history.
I have also used a clean FF installation and taken the "prefs.js" and "sessionstore.js" so to not loose history, but it doesn't help.
Can anyone help me out, thanks!

Ok, I have now installed an original version of Firefox 13.0.1, set it up with a basic set of few add-ons for safe browsing being as follow:
* NoScript
* RequestPolicy
* BetterPrivacy
* HTTPS Everywhere
In all cases described below, I browsed to a few pages, afterwards I go to an empty page/tab (about:newtab) before I close the browser, and is set to: "browser.newtabpage.enabled;false" in the hope also a newtab should be empty.
I also followed the instructions under the following link: https://support.mozilla.org/en-US/kb/how-stop-firefox-automatically-making-connections
* further on I have disabled a few other things under about:config to stop this "leak", such as webGL, telemetry, rename all google links, etc.
1st test
* I did restart in Off-line mode as described under the link given by jscher2000, when restarting the firewall shows no sign of connection to the internet, not even when I toggle from off-line to on-line.
2nd test
* with all add-ons enabled, I got the following result, see below for the list of IP numbers/info:
* 212.121.101.7 Server Location: Netherlands ISP: Routit BV
* 173.194.32.0 Server Location: Mountain View, CA in United States ISP: Google
* 173.194.32.4 Server Location: Mountain View, CA in United States ISP: Google
* 95.100.4.61 Server Location: Europe ISP: Akamai International B.V.
* 192.150.19.49 Server Location: San Jose, CA in United States ISP: Adobe Systems
* 78.129.207.59 Server Location: United Kingdom ISP: Iomart Hosting Limited
* 69.50.232.54 Server Location: San Jose, CA in United States ISP: Silicon Valley Web Hosting
* 82.103.140.42 Server Location: Denmark ISP: EasySpeedy ApS
3rd test
* I disabled all add-ons and closed browser, and started again, same result as in 2nd test, except that 212.121.101.7 was replaced by
* 37.0.87.7 Server Location: Netherlands ISP: Routit BV .
As this behavior has apparently nothing to do whether it's portable or non-portable version of Firefox, one can assume it has always been like this as at least between all versions from 13.0.1 to 19.0.2, as the portable version 19.0.2 behaves the same way.
Let us not forget another user have experienced apparently the same issue under the following link: http://support.mozilla.org/en-US/questions/930187
Any more ideas how the browser user can take control over this behavior, or any suggestions what could be wrong?

Connection to remote SAP system.

Hi All,
I want help in getting connected to a remote SAP System from my desktop. I am working in SAP NetWeaver developer studio.
Regards,
James

Hi James,
Although the info. provided by you does not provide much information about the setup of your SAP System, but you can try this out:
Inorder to get connected to the SAP system via your SAP NWDS(SAP NetWeaver developer studio).
1) Please check if you are able to get connected to the remote server, incase the server is on a different machine. You can do it by following the steps below:
Click on Windows Start menu -> click on Run -> Typein "cmd" and click on Ok button -> Typein "Ping 'IP address of the remote server'", I mean your remote server machine's IP address(Ex:10.6.52.189 or whatever it is). If it responds then please carry out the following steps in NWDS.
2) Please GoTo :
NWDS menu - > Window -> Preferences -> SAP J2EE Engine(Choose this on the left menu).
Now, if your server is not installed on the same machine on which you are working then go for the first radio button which says "SAP J2EE engine is installed on remote host" and enter the server's IP(Internet Protocol) address(Ex: 10.6.52.14, etc)in "Message Server Host" and enter 3601 in "Message Server Port".
Click on apply and Ok.
3) Now again Click on Windows Start menu -> click on Run -> Typein "drivers" and click on Ok button -> Open the folder "etc" -> look for file "Hosts", openwith notepad
-> Now typein the IP address and the corresponding host name(of the remote server)please note that the IP address and the host name should be separated by at least one space, preferably a tab space. -> save the hosts file.
Now you should be able to connect to your remote server.
Regards,
Sudeep

Several test systems ?

Hi,
we have several Test systems (one is used for volume testing for example, another for training).
If I create a track transport connection from the development track to tracks for volume testing and training then the transports will be trigered only when I assemble the SC's.
Suppose I create the tracks after the SC has been assembled. How do I trigger the transports again into the other tracks if I dont want to reassemble the software components in the dev track ? Forwarding components would be nice but it seems to only be there after approval.
Thank you.

Hi,
I will correct myself. The sc's are transported after assembly <b>and approval</b>.
You can forward components manually once they've been approved.
See you

Problem while connecting to external ABAP system (on 4.6C rel)

Hi All,
I've created WebDynpro application that is supposed to fetch info about users from several ABAP systems. J2EE engine that runs this WebDynpro is directly connected to one of the ABAP systems. I've successfully created identical Adaptive RFC models, maintained SLD entries for my ABAP systems and configured JCO connections for my WebDynpro through WebDynpro Content Manager (http://<host>:port/webdynpro/welcome). I was able to reach all ABAP systems testing my JCO connections from WebDynpro Content Manager.
The problem I am experiencing is the following:
the application is working fine for the ABAP system that J2EE (where it's executed) is connected to, but failed to reach the remote ABAP system issuing the following message:
"Accessing System <Remote ABAP system> is not possible because RFC Metadata was retrieved using System <ABAP system that J2EE is connected>. Please assure you have configured the RFC Connections properly. A Server restart may be necessary!"
Where else should I have define JCO settings ?
This remote ABAP system is running on 4.6C so I have no options to install J2EE on it or fully configure SLD for that system.
It may seem like a dummy question since I am new to WebDynpro programming.
Thanks in advance,
Mike

Hi Rich,
Thank you for a quick reply,
Here is what I've done to connect to the remote ABAP system:
1. Configured this remote system in the SLD as a Technical System (SLD=> Technical Landscape).
2. Opened WebDynpro Content Administrator and created two JCO's for my application pointed to that remote ABAP system (defined in SLD). I was able to test them successfully reaching that remote system.
But when I run my application the same error occured.
What did I miss ?
Thanks & Regards,
Mike
Message was edited by: Mykhaylo Puzankev

Zens - connectivity with car audio systems

Hi - got an odd, obscure question. I have an Audi fitted with the so-called 'Audi Music Interface'. As well as the ubiquitous Ipod connector, this one comes with a mini-USB port to which I have successfully connected a Zen X-fi 32GB and a 2GB Samsung YP-K3. However, when I try to connect my 4GB Zen V+ I get an 'unable to connect' message from the Audi.
The music on all three is from the same source (same file formats etc) so what can be thedifference between the two Zens that prevents one of them from being recognised by the unit's I have usedWMP to transfer the music to all threeMP3 players.
Another oddity - while I'm at it - is that the X-fi doesn't like being undocked from the car and will frequently lock up and require a reset. It will resume working without a problem if left connected iin place.
Any ideas anyone
Paul

OneMoreOne wrote:
Yeh - tried that. Trouble is, it doesn't last. I frequently have to reset the device and, every two or three days, it hangs so completely, I can only get it going again by going into Recovery mode and doing a 'clean up'. This works but not for long.
I've also noticed that the Zen doesn't appear to charge while connected th the car system. The little green battery indicator suggests that it is charging but after 48 hours in the car, the Zen won't start and has to be recharged via my computer
If that player is under warranty I would return it. If not use another method to connect to the car stereo. Unfortunately I don't know enough about the system you have to advise on that. As for the charging I have a USB port on mine & the same thing occurs as it appears to dock & charge except it does not. That I would say has to do with the player itself not that it is a defect of the player. For instance all wall chargers in particular the ones you can plug a usb cord into will not charge a Creative player. I know because I have tried with several different players I own. The fact your stereo is Ipod ready tells me that very well may be why it does not perform as you would expect since the 2 devices are very diiferent.Wish I could be of more help.

Cannot connect to the phone system. An unidentified error has occurred, Please try again.

Issue: Lync 2013 users with remote call control enabled cannot connect to the phone system. When the user logs into Lync, they see an exclamation in the bottom right corner
with this error.
Error: Cannot connect to the phone system. An unidentified error has occurred, Please try again. If the problem continues, please contact your support team.
Environment:
1 site: Site1
2 Pools:
1. Lync 2010
Trusted application is added here for the site.
2. Lync 2013
Avaya phone system: AES r6-1-2-32-0
I have not moved the trusted application to the Lync 2013 pool yet, but my understanding is that it should still work since it’s in the site. Is my understanding on this correct? (All of my other trusted applications do work for Lync 2013
users & none of them have been moved yet. Remote Call Control is the only one that does not work.)
This is from the uccapi log. This is just from the user logging in, not actually making a call. Below are the items that I think are important, however, I don’t know how to interpret it to determine if the problem is on the Lync side or
the Avaya side. Here’s a summary:
SIP/2.0 100 Trying
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="E05700E2", snum="9", rspauth="f308eae87c0bbe64a1ab213574776cbdf9823ab6", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]>
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 200 OK
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="15C0F9A2", snum="13", rspauth="4fd891e39a33e902fb1cec5d980e5bf0ccb172a0", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 487 Request terminated
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="F46EC133", snum="14", rspauth="1d92718caa4f61d967faa46a5c256aafa8b4e740", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
ms-diagnostics: 5002;reason="Request was cancelled";AppUri="http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent";source="lync03.
domain.com"
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0

Hi Suelizy,
To better understand the issue, I would like to collect the following information for troubleshooting:
1. Do you mean the Lync 2010 user can connect to the Phone System?
2. What’s next hop pool of the application?
In a mixed environment, you must set the next hop pool to be the Lync Server 2013 pool.
Best regards,
Eric

HT5517 How do I connect my Home Theatre System to Apple TV such that I Can Play the Music on my iPhone through the Home Theatre System.

How do I connect my Home Theatre System to Apple TV such that I Can Play the Music on my iPhone through the Home Theatre System?

Thanks for the reply. I tried but failed. There's no sound through the Home Theatre system ( Bose 3.2.1 GS). The audio audio always come through the TV which is connected to the ATV. Please help. Thanks

I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV through IPad wherever by using wireless and App Remote

I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV in my IPad wherever by using wireless and App Remote??

If you have an iPad 2 you can wirelessly mirror it to your TV via the ATV device. If you have an iPad 1 then you can use airplay but not all apps are enabled to push video, as the developer needs to do this.
You can also view all local content from iTunes or your iPad, pushed via airplay/home-sharing.
The other services available are iTunes movie rentals, TV shows (past purchases viewable from the cloud), Photo Stream, Netflix, Vimeo, Podcasts, Youtube, Sports etc.
More info
http://www.apple.com/appletv/

How to connect to the multiple system in the same environment

Hi Everyone ,
We are integrating SAP EP and BOE . We are facing SSO problem ,as there are 2 system in same environment .
Suppose we have XX1 and XX2 as BW backend system . IF Default entry on server is kept blank then we get :
"u2022 Account information not recognized: No SAP system was passed as part of the user name and there was no default system defined. User credential validation cannot continue. " error.
Whereas if we give XX1 as defaut system on server , then SSO is not happening we as are XX2 users .
Anyone has any idea on how to connect to multiple backend system in the same environment .
Edited by: shivani mishra on May 20, 2010 11:22 AM

Hi,
As you can see in the help link below:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2f873d1ca96d7be10000000a114a6b/content.htm
There is a trust system and the trusted systems. One system can trust in many other systems. You have just to configure it exporting and importing the certificates as explained in the link.

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Serve

Hi!
I'm using consume adapter service> sqlbinding > to connect to sql database in order to generate sql schemas.
I'm getting below error:
Connecting to the LOB system has failed.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified).
Christiane

Hi,
As suggested earlier this seems to be a DTC related issue. It can only occur if the DTC settings are not proper or if firewalls don't allow the default ports to communicate.
Check DTC settings on both SQL and BizTalk Box and also check if MSDTC service is up and running.
Go to Start
à Run
à (type in) Dcomcnfg. You should be inside Component Services MMC.
Expand Component Services
à Computers
à My Computer (right click)
à Properties
à MSDTC tab
à Security Configuration button.
Select the checkboxes as following :
Check the below article from Microsoft Support Team, they have listed all the errors which may come during setting up a new system. They also have your MSDTC error listed.
Resolving the issues you may face during BizTalk Runtime Configuration
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

NWDS connect to several CE systems

Similar Messages

Maybe you are looking for