NWDS settings to import NWDI configurations

Hello,
I am trying to import the CMS configurations onto my NWDS. I have entered the NWDI url in Windows -> Preferences -> JDI -> Development Configuration Pool. However, when I try to log in from NWDS, it points to an old url that I had been using until recently, and thus the login fails. I have replaced the old url with the new one as mentioned.
The error I get is: Build Server http://<Old Host>:<Old Port>: Invalid Username and/or Password
I don't understand from where it is picking up the old host and port details. Is there any place else I need to change the URLs in the NWDS to import the configurations from my new NWDI server?
Thanks in Advance,
Reena
(When I had imported the NWDI configurations to my NWDS with the old server, the Development Configuration Pool was the only place I had entered the URL. I wonder why it's not working now!! )
Edited by: Reena Prabhakar on May 12, 2008 4:41 PM

Hi,
Follow these steps,
1. Close your NWDS.
2. Navigate to this path in your file system <installation drive>:/Documents and settings/<logged in user>
Now, delete the .dtc and .sdtgui folders from here.
3. Open your NWDS, set the new url for the sld as you specified above.
4. Try importing the configuration.
Regards,
Murtuza

Similar Messages

JDI: Cannot import development configuration into NWDS

Hi everyone!
I am trying to setup and use the Scenario 2+ for the JDI.
So far, I have
1) created users and roles for the JDI
2) created a software component called com.company/WeekNumber
3) created a domain and a track in the CMS
4) imported required SCs for the system
All according to help.sap.com.
Now, when I start the NWDS I would like to import the development configuration to be able to start developing my components. But when I try to import the configuration, I get the error
com.sap.tc.devconf.SyncException: Import configuration failed:Could not create mountpoint for SC in compartment nordea.com_WEEKNUMBER_1: Checking existence failed for /dtr/ws/Week/nordea.com_WEEKNUMBER/dev/inactive/SCs/nordea.com/WEEKNUMBER/_comp/TopLevelDCs/(Internal Server Error)
Please advise.
Best regards, Peter

It solved itself after a restart of the NWDS. :o)
/Peter

Some DCs are not available locally - NWDS error while importing Track confg

Hi,
We have configured NWDI in our landscape.
As per the requirement of the developers, we have created a new product and software component (SC) in SLD, as they don't want to use any standard components.
The same has been synced with CMS using update CMS.
Now a new track is created (in landscape configurator) and the new SC has been added to the track. Track creation was successfull....given the sdm passwords for all 3 systems.
While saving a pop-up came saying that as the SC is New (i did not select the developed option), I need to Check-in and Import into DEV manually.....I GOT STUCK HERE.
What files needs to be checked-in in Transport studio?
Also when developers are trying to import the configuration in their respoective NWDS...they are getting "Some DCs are not available locally" error.
Also updated the patch of their NWDS but still no use.
Could any one help me out.
Regards,
Siv

Dear Satya,
As per your advise. I have maintianed the 3 dependencies for the SC.
However, the error "Some DCs are not available locally" is still recurring in NWDS.
Below is few line from log,
Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Used component not found: sap.com/tc/bi/bp/webDynpro
Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
Build log -
Development Component Build (2009-07-14 18:49:13)
Component name: RIB_SAPPS
Component vendor: sap.com
SC compartment: arg_PRIMAVERACUSTOMIZATION_1
Configuration: EPD_ARG_D
Location: EPD_ARG_D
Source code location: http://den2:50100/dtr/ws/ARG/arg_PRIMAVERACUSTOMIZATION/dev/inactive/DCs/sap.com/RIB_SAPPS/_comp/
DC root folder: C:\Documents and Settings\sa45572\.dtc\1\DCs\sap.com\RIB_SAPPS\_comp\
DC type: Web Dynpro
Host: CMR-2FL0565
DC Model check:
   All used DCs are available locally
   ERROR: Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
   Build failed with errors.
Jul 14, 2009 6:48:50 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.actions.dc.UsedDCFoundHandlerBase) [Thread[main,5,main]] ERROR: failed to resolve reference "sap.com/tc/wdp/metamodel/content" for DC "arg_PRIMAVERACUSTOMIZATION_1:sap.com/RIB_SAPPS":Cannot find compartment of used component: sap.com:tc/wdp/metamodel/content
Regards,
Siv

Not able to import track configuration

Hi,
I'm trying to import track configuration into NWDS. I successfully created track and required sca files also imported. I do have all required privileges.
I'm using NW 2004s SP 12 and not a sneak preview edition.
Following is the error:
Caused by: com.tssap.dtr.client.lib.vfs.config.ConfigurationException: Could not create remote path /dtr/ws/TRAIN/TRAINING_SOFT_COMP/dev/inactive/SCs/TRAINING_SOFT_COMP/_comp/TopLevelDCs/ (Communication error [cause: Read timed out]).
at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.assureRemotePathExists(RepositoryServer.java:230)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2748)
Thanks,
Shiva

Hi,
You will have to enter SLD server and NWDI server if they are located on different server.
If they are on the same server. Try following thing.
1. Close NWDS
2. Go to C:\Documents and Settings\<UserId> and delete .dtr and .dtc folders created.
3. Open NWDS and try importing now.
OR.
Go to DTR perspective.
Choose DTR-> Create Client from the menu option.
Enter details of the client and save.
Try importing.
Ashu

Error while import development configuration

I can't import development configuration in NWDS from file. After upload xml file, config-dialog ask me to auth into NWDI.
I enter my login/pass and recieve strange status: DTR auth me well, but CBS can't auth me at all!!
Any ideas?

Hi,
NWDS you need to try this General->Network connections-Active Provider dorpdown change to manual
Add Host button click hostname/IP your server details enter.
After try to import the track.May be help for you.
BR,
Durga.

NWDI Configuration

Hi,
We have successfully installed and made necessary post-installation steps, configurations in for NWDI system. Product, software unit, Software component were created in the SLD and Name Prefixes were also defined. I have also created users for developers in NWDI and SLD, and assigned them with role NWDI.Developer. But when the developers login they could successfully login with an error message login failed and import configuration. When we import this configuration into Developers NWDS and try to create a new DC only sap.com vendor appears and no other vendor is displayed.
What could be the issue and where i am missing? Kindly suggest on this
regards,
Anand

Hi,
Please refer these links for this issue -
<b>
http://help.sap.com/saphelp_nw70/helpdata/en/89/e3a43f4aa1330ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/d8/217b426af4b767e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/c3/e3a43f4aa1330ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/62/1f5a42672ee054e10000000a155106/frameset.htm
</b>
Pls reward points if useful.
Regards,
sree

Getting an error while importing Development Configuration file (NW 2.0)

i,
while importing a development configuration file for Webdynpro ( SAP NW 2.0 ), i am getting an error
"Getting Input Stream Failed-> Unable to find the host ..."
But i can ping to the server and tr is also working .
i could see Active and Inactive Objects
Any access permission is needed to download a configuration file.
or whatis the reason for this error.
any preconditions have to be done for importing a configuration file ?

You can try the following:
1. try the fully qualified domain name of the DTR server host in NWDS Preferences->Development Configuration.
2. Are your WAS and JDI are on a higher SP level. That may cause the problem
regards,

Getting an error while importing Development Configuration file

Hi,
while importing a development configuration file for Webdynpro ( SAP NW 2.0 ), i am getting an error
"Getting Input Stream Failed-> Unable to find the host ..."
Any access permission is needed to download a configuration file.
or whatis the reason for this error.
any preconditions have to be done for importing a configuration file ?

You can try the following:
1. try the fully qualified domain name of the DTR server host in NWDS Preferences->Development Configuration.
2. Are your WAS and JDI are on a higher SP level. That may cause the problem
regards,

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

SAP NWDI Configuration

Dears
Can someone help me know the basic steps that comprise in NWDI configuration and deploying java developments... in terms of basis / developer's responsibility.
Thanks

Hi,
Here is the link to the document about NWDI configuration.
http://help.sap.com/saphelp_nw04s/
helpdata/en/44/60dc1943c2311ce10000000a155369/content.htm
Also please check if the information specified below is helpful
1. When you mark the checkbox "Integrate into JSPM scenario" the runtime
system is flagged that you do development for this system with NWDI
and therefore SAPJup will ask for new SCAs of your companys developed
software comopnents during upgrade. (This of course only works when
you already migrated your development to 7.30 release)
2. If you upgrade the DEV System, SAPJup will copy the SCAs of the
runtime system to the CMS JTrans Folder (in case it is available from
the runtime system) so that you can afterwards check in and import the
SCAs into a CMS track for the migration. (see also point 2 subpoint 2
in "Procedure" under https://cw.sdn.sap.com/cw/docs/DOC-136984)
But you can of course also copy the SCAs manually to the JTrans folder
of CMS.
Nevertheless it should also be possible to upgrade a system without
having set the flag in CMS. Then you need to take care on your own of
copying the files to CMS in case of DEV system upgrade or in case of
TEST / PROD system upgrade make sure, that for your developed software
components a 7.30 compatible version is available in the SAPJup inbox to
be included in the upgrade.
Otherwise your own developed applications might not work after the
upgrade.
Thank You.
Regards,
Deepika

Problem while importing NWDI components in CRM5.0.

Hi All,
I'm facing problem while importing NWDI components in CRM5.0. Imports are running for long time and failing.
Could anyone please help me out.
Thanks in advance.
Regards,
Deepthi.

Thanks for your replies.
Can any one guide me Is there any need to deploy once again into production after or before importing into production through NWDI?
From development i released activities and able to see them in NWDI(CMS). I was able to successfully import in consolidation and even approved it without any errors. But when I tried to import in production tab , I am facing above problem.
Can any one explain me do I need to deploy directly into production (through NWDS) in WebDynpro perspective before importing into production from NWDI?
As far as my understanding if I import successfully into production I may need not to deploy it again.

Getting Error in I.D while Importing a Configuration Scenario

Hi ,
I'm traying to import a Configuration scenario . after choosen the scenario from teh Imported Objects it was giving the Error message java.lang.NullPointerException .
Any specific reason is there for this or can any body suggest me the solution.
Regards
Jain

Hi Swarup & Sandeep,
Previously i had imported a Configuration Scenario that was imported successfully .recently we deployed some .sda file for JDBC drivers for connecting legacy systems. and after that now I'm unable to Import any scenarios
Please suggest me .
Regards
Jain

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

Problem in Importing in configuration.

Hi All,
I am facing a problem while importing the configuration object saying that "UNABLE TO CONNECT TO SLD".
Can you please let me know if i need to check anything , or anyway out.
thanks,
JAY

Thanks a lot for all your valuable suggestion.#
I have checked the SLDCHECK it is perfectly all right as expected with most of the things in gree and there is no red mark showing in from the perticular transaction, so also the SLD part is also opening perfectly as expected.
what next ... i am not findng any clue to progress.
thanks,#
JD

Importing ATO Configurations

Hi,
We are trying to import ATO configurations on a sales order. Our model structure is like we have a top ATO model (called PATO) with two child ATO models and additional components. The child ATO models are defined with WIP supply type as 'Phantom' in the top ATO model. We can see the entire BOM structure in the intended BOM. We populate the columns top_model_line_ref+ and link_to_line_ref+ in the Order Import interface tables like mentioned in Oracle whitepapers and metalink notes. On import, the order is imported, however the link between the top model and the child lines is broken. We can see the entire configuration on the order form, however not on the configurator HTML page. There we see only the top model. The child ATO models are not included in the final configuration. The column 'link_to_line_id' is also NULL. The Order Import log files gives the error message +"The given node was not found within the model"+. From the log file we made out that this message is coming from the CZ Batch Validation API. It appears that somehow the CZ Batch Validation API is not able to resolve the child/components as under the top model and thus fails. The configuration for the Child ATO models is generated using the CIO java API using a model string. We get the individual configuration of the child ATO models and put them under the top parent ATO model (PATO) and then trying to import the sales order. We are not sure if we are missing anything here. Do we need to populate any other interface tables (like some CZ tables) to support this Order Import. Has someone tried this? Please advise if this is even feasible or not. Any workarounds/alternative solutions?
PATO
| Child ATO1
| Child ATO2
Child ATO1
|OC1
|Option1
|Option2
|OC2
|Option3
|Option4
Child ATO2
|OC1
|Option1
|Option2
|OC2
|Option3
|Option4
Thx,
Nitin

Hi Jason,
I appreciate your inputs on this. It looks like the Order Import is not designed to import configuration of a published model structure (based on our testing). Yes we are able to open the runtime configurator page from Order Management and able to configure the complete nested model structure. We tried to use the batch validation API in an adhoc manner (using pl/sql) and did two tests:
1. Test#1, with the non OCD published nested BOM model structure. We dint pass any config_hdr_id or config_rev_nbr in the initialization message. We did pass the configuration details (component_code, qty, input_seq) in the config_input_list. This created a new configuration and validated it as seen the termination message.
TC70 ->5219597; C70 ->5219517; C70-ENGINE ->5219518; C70-TRANSMISSION ->5219537; C70-V6 -> 5219538; C70-V8 -> 5219539; C70-STANDARD -> 5219540; C70-AUTOMATIC -> 5219541;
<initialize>
<param+name="organization_id">xxxx</param>
<param+name="config_creation_date">12-26-2011</param>
<param+name="database_id">xxxx</param>
<param+name="calling_application_id">660</param>
<param+name="responsibility_id">64351</param>
<param+name="inventory_item_id">5219597</param>
<param+name="read_only">false</param>
<param+name="save_config_behavior">new_revision</param>
<param+name="save_usage_behavior">never</param>
<param+name="user">xxxx</param>
<param+name="pwd">xxxx</param>
</initialize>
l_rec_index := 1;
config_input_list (l_rec_index).component_code := '5219597-5219517';
config_input_list (l_rec_index).quantity := 1;
config_input_list (l_rec_index).input_seq := l_rec_index;
l_rec_index := l_rec_index +1;
config_input_list (l_rec_index).component_code := '5219597-5219517-5219518';
config_input_list (l_rec_index).input_seq := l_rec_index;
config_input_list (l_rec_index).quantity := 1;
l_rec_index := l_rec_index +1;
config_input_list (l_rec_index).component_code := '5219597-5219517-5219537';
config_input_list (l_rec_index).input_seq := l_rec_index;
config_input_list (l_rec_index).quantity := 1;
l_rec_index := l_rec_index +1;
config_input_list (l_rec_index).component_code := '5219597-5219517-5219518-5219538';
config_input_list (l_rec_index).input_seq := l_rec_index;
config_input_list (l_rec_index).quantity := 1;
l_rec_index := l_rec_index +1;
config_input_list (l_rec_index).component_code := '5219597-5219517-5219537-5219540';
config_input_list (l_rec_index).quantity := 1;
config_input_list (l_rec_index).input_seq := l_rec_index;
l_rec_index := l_rec_index +1;
Result:
======
<terminate>
<config_header_id>3730129</config_header_id>
<config_rev_nbr>1</config_rev_nbr>
<valid_configuration>true</valid_configuration>
<complete_configuration>true</complete_configuration>
<exit>save</exit>
2. Test#2, with the OCD published nested BOM model structure. We dint pass any config_hdr_id or config_rev_nbr in the initialization message. We did pass the configuration details (component_code, qty, input_seq) in the config_input_list (like test#1). This created a new configuration and validated it as seen the termination message. But failed. The termination message as seen below:
Config processed successfully
Recieved Response from the server follows ....
<?xml version='1.0'?>
<terminate>
<config_header_id>3729912</config_header_id>
<config_rev_nbr>1</config_rev_nbr>
<valid_configuration>false</valid_configuration>
<complete_configuration>true</complete_configuration>
<exit>save</exit>
<config_outputs><option><ps_node_id>26899222</ps_node_id>
<selection_line_id>138773258</selection_line_id><bom_item_type>1</bom_item_type>
<component_code>5213637</component_code><quantity>1</quantity>
<inventory_item_id>5213637</inventory_item_id>......</option>
</config_outputs><config_messages>
<message>
*<component_code>5213637|1-1323962|1</component_code>*
<message_type>warning</message_type>*
*<message_text>The given node was not found within the model.</message_text></message>*
*<message><component_code>52136371-1320165|1</component_code>*
*<message_type>warning</message_type>*
*<message_text>The given node was not found within the model.</message_text></message>*
............</config_messages></terminate>
Again we have not written any CX's to be executed during the batch validation like you mentioned (postConfigNew event). The batch validation seems to be working fine for non published BOM models, but not for published BOM model structures.
Can you please elaborate or email me the details about the point#2 of launching the configurator during the batch validation. I will go through the impl.guide meanwhile.
Thanks,
Nitin jain

NWDS settings to import NWDI configurations

Similar Messages

Maybe you are looking for