NX6800-TD128 DVI-D problem

Hi !
I am a happy owner of ay MSI NX6800-TD128, which I have a problem with. When I connect it through the normal D-SUB cable (normal vga cable, everything is fine).
BUT when I am trying to connect it with the DVI-D cable, which is the purpose why I had bought it along with the 23 col BENQ LCD, there is no signal.
I had tried to manually change the Input source as well,but no luck.
The solution should be siple, could somebosy help me out please ?
HOW CAN I TURN ON THE THE DVI SIGNAL ?
Many thanks,
Moore

Test 1: Get another LCD monitor with DVI connection and test it on this graphic card.
Test 2: Also, test the card on another monitor with DVI connection that known to work.
If test 1 fails, return the graphic card.
If test 2 fails, return the LCD.

Similar Messages

  • Arctic Cooling NV Silencer 5 on NX6800-TD128?

    Will it fit or will i face any problems if i buy that cooler? Any tryed?
    If any here got that card and that cooler:
    -A lot more quite(probable spelled wrong, but less noise)?
    -Got any cooler?
    NX6800-TD128
    Artcic Cooler NV Silencer 5

    this cooler is for NVIDIA Geforce 6800 series, which mean it will fit with  NX6800-TD128 without any problem.

  • NX6800 TD128 problem

    I bought a NX6800 TD128 about 3 weeks ago.
    As soon as i had installed it I put doom 3 staight onto my machine, so that I could test how fast it was.  But It wasnt great at all first thing what happened, As soon as i had started the game, was that the whole screen divided Up into small black triangles and flickered like mad . this only happenes If I am moving thou. If I don't move my charecter in doom 3 everything is great but If I start to move the whole monitor flickers. This doesn't only happen with Doom 3 but with XIII or Prince of Persia the Sands of Time. But with the latter two games It isn't so bad with PoP It hardly ever happenes (the flimmering) and with XIII It only happenes In outdoor leveles. But doom 3 Is horrible. I have already installed all the newest drivers for the VGA card (forceware61.77) and I've also got the newest ones for my motherboard (asus A7N8X) And I#ve got SP2. I'm not quite sure if my powersupply is good enough thou. It says It has 500watts butt in real life it only has 5v 30A 3,3 28 A an 15v A with 12v But that should do. I can't think thats the problem because I've already tested the Pc with all the extra bits like Cd drives and PCI cards unplugged and the flickering didn't change. what can I do ? Is my VGA card faulty or something ?
    please help me
    with regards x7aa1186

    Quote
    Originally posted by x7aa1186
    If I would return it do you know if I can send it straight to msi, because I bought the VGA card in the UK and I live in Austria so it's a bit of a strain sending it back to the retailer.
    Speak to MSI and ask them the best way to solve this problem.

  • MSI NX6800-TD128 Vs MSI K7N420Pro

    I got myself a new graphics card today.
    Unfortunately everything has not gone that well. Once I installed the new graphics card I noticed a distorted image on the BIOS boot up screens:
    Some of the characters would blink.
    Strange flickering lines (always on the same areas)
    Once I booted up Windows I had similar problems with flickering lines and flickering lines of blocks.
    I tried installing the drivers but I the computer would black screen and stay there.
    Does anyone have any ideas? Incompatibility with the motherboard? Faulty graphics card? Power supply?
    Thank you.

    Hi guys.
    The NX6800-TD128 does not have a particularly big cooler so it fits in perfectly.
    There is no cap immediately in contact with the card but I guess they are within ~4mm.
    The power cable is inserted into the card.
    The monitor cable is fully inserted and I've also tried using the DVI socket with the converter but that gives me the same problem.
    I was previously using the onboard video.
    I did remove the drivers and run DriverCleaner to remove all traces of the drivers. I don't think it's a driver issue as the problem also occurs on the screens prier to Windows loading. I did read somewhere that the drivers can tell you if your card is not getting enough power so I tried to install the latest WHQL drivers from nVidia's site but unfortunately Windows would black screen and stay there.
    I did not add (or remove) anything, including RAM, when I first inserted the card.
    I've since removed every PCI card and every drive to limit the power use/conflicts but that has not helped.
    Now for the bad news (for me) (I'm worried you guys are going to say that this is the problem and that I'm going to have to go out and spend £50 on a high end PSU):
    I've tried two PSUs (they produce slightly different distortions but they both produce them).
    Q-Tec
    "550W PSU"
    +3.3V@20A (Max, (Peak=30A)
    +5V@35A (Max, (Peak=40A)
    +12V@14A (Max, (Peak=20A)
    AOpen
    300W PSU
    +3.3V@28A
    +5V@30A
    +12V@15A
    (+3.3V&+5V=180W Max)
    (+3.3V&+5V&+12v=280W Max)
    Best regards guys.

  • MSI NX6800 TD128 and Garbage Characters

    Purchased an NX6800 TD128 on Saturday. Put it in the machine last night and all I get is garbage characters flashing on the screen
    The Windows XP logo appears after a few seconds, this time with flashing green lines down the screen. The machine then either hangs with white flashing characters onscreen, or it reboots. If it reboots, same happens again. The spec is ...
    Athlon XP2600
    1Gb RAM
    1 x DVD writer
    1 x DVD ROM
    2 x 160Gb Western Digital HDD
    480w Tangen power supply
    I put the old GeForce FX 5200 back in and it all works fine. Any ideas folks? Looks like it's a dead one to me  

    Hi retro-squirrel
    One thing you should know before you post a problem is to give a more precise signature . If you don't give the max amps of your PSU (3.3v/5v/12v), make and type of ram (preferably with lat & cas), most of the moderators won't bother answering. I would imagine they are sick of telling people to make more informative signatures . Here is a link to give you a hand...
    Suggestions on posting and getting better answers
    This is from GlennVidia who is one of the mods from this area, if you fix up your sig he may be able to steer you in the right direction. He is very knowledgable and extremely helpful . I'll pop back later to see how you are going. Hopefully you don't have to RMA that card of yours.

  • NX6600GT Vs. NX6800 TD128 AGP 3Dmark05 results

    Hi to all,
    Can you please help me compare these two cards? How much difference is there between these two:
    NX6600GT TD128 and NX6800 TD128 AGP in 3Dmark05?
    Anyone tried them in 3ds Max?

    I got a 3dmark05 score of 5499
    Neo4 Plat
    Venice 3000+ @ 2411Mhz (9 x 268)
    MSI 6800GTO @ 410 core, 1050 mem
    2 x Corsair CMX512 3200XL, dual-channel @ 200Mhz 2,2,2,5 1T

  • How long for NX6800 TD128 rma (weird characters problem)

    Anyone rma this card to MSI? I sent it in tuesday of last week and it's still not on it's way. On the tracking, it is said to be "In Processing"

    i did call and they said they would have to call back, so I asked for an e-mail cus my parents would probably assume they were a telemarketer, because the person i was talking to did not have the information on his computer as to why it was taking so long.  so i should be gettin that tonite or tomorrow morning.  I'll update later for anyone who's interested in how long it may take for them

  • DVI output problem

    Hello,
    I have a 1.83Ghz Core 2 Duo Mini that will not output any video over DVI.
    I have connected the Mini via DVI to three known-good monitors (Apple 20in Cinema Display, Gateway 22in HD LCD, and an Acer 22in LCD) and can't get any video output. I get a startup chime, drive noise and a power light, but no video.
    I have attempted to start the Mini in safe mode while connected to the Cinema Display but still can't get any video. I've reset the PRAM and PMU and that didn't help.
    The Mini will display video using the Apple-supplied DVI-to-VGA adapter when connected to the Acer and Gateway displays.
    When I took the Mini to the authorized service center, they said they couldn't replicate the problem. So I'm a bit stumped. Has anyone here had similar problems and/or solutions?
    Thanks in advance for any advice you can offer.

    I once had a similar problem. For testing I did not bother to screw in the retaining screws on the plug into the monitor. Could hve kicked myself when, after screwing them in, it worked fine.

  • Mini-DVI out problem

    I recieved my mini-dvi -> dvi apple adaptor from ebay this morning (finally!), but am having a feew teething problems. The plug fits snugly in the back of the iMac, but if pressure( only a little) is applied to the side or top of the plug (the one going into the back of the iMac), I lose the picture. Is it possible that I have a dodgy knock off adaptor ? The part number (603-3795) on the wrapper matched the part number for the 12" powerbook G4 mini-dvi -> dvi adaptor.
    After a little more examination I have found that if the plug is pushed in fully, it does take a little leverage to make the connection 'die' I suspect this is due to the greater number of (very) small connections on the mini-dvi port. It does only seem to happen when the plug is pushed toward the DVD drive side of the iMac too (again suspecting losing the connection to a key pin or two).
    Does anyone else have experience with this ,and can they advise if they experience similar problems?
    Of particlar note is the fact that the menubar (which I have placed on the external monitor) does not get relocated to the iMac screen when the external monitor goes dark, so presumablyy the mac still thinks the monitor is connected. Is there any chance the problem is due to a faulty connection on the motherboard.
    I only purchased the iMac from John Lewis last Weds, so presumably I would be within my rights to return it and insist on a replacement?
    Grrr, just want it to work right
    Thanks all

    the cable was broken - new one from apple fixed it

  • Mini Displayport to DVI Adapter Problem on Mid-2009 Macbook Pro

    I have a new mid-2009 Macbook Pro hooked up to a 20" Samsung 2033sw LCD with a native 1600x900 resolution using a mini Displayport to DVI adapter that I bought off of EBay. No matter what I've tried I can't get anything to display on the external Samsung LCD higher than 1024x768. I tried switching between GPU's and that made no difference. Any ideas.?

    Michael, thanks for the reply;
    When you open System Preferences/Displays does a second preference panel open up OK on the Samsung ?
    Yes, but I can't see it unless I select 'gather displays'. Then it appears on the MBP LCD, and showing the correct resolution - 1600x900.
    Is there an Options Tab visible under which you can check 'Overscan' ?
    None that I can find. Only display and color tabs.
    Is the Refresh Rate set to 60.0 Hertz
    Yes, that is what it shows in Refresh Rate.
    I also pulled out an older LG LCD that is fairly generic, .e.g. it has DVI in at 1280x1024. Same problem on that LCD ... nothing higher than 1024x768, but this time at 1280x1024 I get major noise and screen distortion. The displayed image is jumping all over the place, but at least there is something displayed.

  • Going from DVI to DVI cable from VGA  to DVI cable problem

    Got a mini with the VGA adapter to DVI working with no problem. When I decided to hook up a DVI to DVI cable, I got no picture. I had to reach behind the mini, press the power button to put it to sleep, then press the power button again to wake up the mini again to get a picture. The monitor is a 20.1 inch AOC monitor. The picture is sharp in both cases. The DVI to DVI setup is slightly smoother.

    After I reboot I still get no picture. I have to reach behind the mini, press the power button to put it to sleep, then press the power button again to wake up the mini again to get a picture.

  • Mac Mini DVI Monitor Problems

    Hi all,
    I'm running OSX10.8.5 on a Mac Mini 2.5 GHz Intel Core i5 with 4 GB 1600 MHz DDR3 memory and Intel HD 4000 512MB graphics.
    I've just upgraded my monitor from a VGA 17" to an AOC E2462VWH 24" monitor, plugged into my computer via DVI with a Thunderbolt adaptor.
    In a normal boot-up, the monitor displays video for a split second and then cuts to black. The picture works fine in Safe Boot mode but video is jerky, everything loads slower, I can't play .mov files (Quicktime tells me unknown error -101) and there is an annoying flicker every 10 seconds. The fact the monitor works fine in Safe Boot suggests to me the problem is software. Resolution is set to 1920 x 1080 @ 60Hz and OSX is not letting me change that via Settings.
    I went searching for drivers only to lean it sounds like OSX deals with monitors in a plug-n-play format. Is this true?
    Firstly, can I confirm my mini has the power to drive this monitor?
    Besides that, can you please help me figure out how to boot this computer so the monitor displays in normal boot-up mode?
    Thanks for your help!

    Then it sounds like yo need one of these:
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter

  • Macbook mini DVI to DVI output problems

    hi
    I've been using a samsung syncmaster 22" with my macbook for about a year now with no problems using the mini DVI to DVI connection
    then earlier this week i used a different DVI cable to plug my playstation 3 into the screen, when i plugged the computer DVI cable back into the screen lots of red/pink pixels have taken over the screen and when the desk is nudged red lines flash up
    i thought it might be either the DVI cable or the mini DVI to DVI adapter and replaced both to no avail, i have also tested all the cables on other screens/with other computers, and tested the screen with my playstation. Screen and cables all work fine so i think it must be some kind of output problem, but cant work out what it could be seeing as nothing would have happened to the port on the actual computer whilst changing connections on the samsung screen
    sorry for the long winded post, really wanna know what the problem is here

    Hi cbeth,
    welcome to macbook forum.
    For your friend macbook, try to press F7 back and forth to switch between mirror and expanded mode.
    Try to update your macbook hardware firmware and software using software updater and repair permission after that...application/utilities/disk utility/repair permission.
    Also reset your PRAM and PMU.
    Open your friend system preference / display and try to compare and set yours similar to hers, including resolution, color depth, refresh rate.
    Good Luck.

  • Mini Displayport DVI Adapter Problem

    I'm currently having issues with my MacBook Pro's DVI out (via Apple Mini-Displayport Adapter). Whenever my displays go to sleep (which is set after an hour) and wakes up, sometimes the external display (a SyncMaster 220WM) shows "snow" or "static" ... basically what you'd see if a TV station had no reception. If I let it sit for a minute, the second display will return (the MBP's primary display is fine, no errors of any kind). If I power off the Samsung display, the MBP treats the connection as if I pulled the cable out and reverts to a single screen setup. I have been able to reproduce this by using "Hot Corners" to sleep and wake up the displays. I'm using the 9600m GT as the computer is my desktop replacement. I never had this happen to me before with my older MBP with an 8600m GT using the same DVI cable and display. I think it's the mini-displayport adapter. Is this a common issue. Anyone else having these problems.
    Thank you!

    I have been experiencing the same flickering problem when using the mini Displayport output on the GT120 to drive secondary monitors at my office. Using a Monoprice cable instead of Apple's adapter provides a more stable signal, but we still get intermittent flickering where the screen goes black for a second, then a full image returns. I think this issue is due to massive loss of signal strength via the mini Displayport output on the GT120 card. Hot Plug Detect is also weak which points to low signal strength. This might be fixable by increasing the output voltage of the card slightly to boost the signal strength. Apple really should just issue a firmware/BIOS fix for this problem since the implementation of mini Displayport on these cards seems poorly engineered. Does anyone know how to do this?

  • DVI Display Problem - Any quantitative technical data?

    There has been a huge discussion on the Mini DVI "problem" here and in many other places on the net, but nowhere have I ever seen confirmed quantitative measurements with a clear explanation what the problem is and why some LCD monitors work and others don't. heck - we even have the same Mini/monitor combination working for one person and not the next.
    For the VGA issue there were lab test posted by some German website which clearly identified the shortcomings of the Mac Mini VGA output, but I have not seen anything similar for the DVI problem.
    Has anyone actually taken any measurements or seen anything on a website that clearly defines the problem? Inquiring minds want to know...............

    This is in regard to the static type problem connecting via DVI from Mac Mini to certain LCD displays, like my HP L2335 23".
    I don't have any measurements for you and don't know DVI enough to provide them, but I have been asking around about this of some folks who DO know DVI. Here are a couple responses:
    "The technical term for what you are seeing is "sparklies"
    They are caused by the receiver in the monitor making mistakes in decoding the pixel data being sent by the Mini.
    Data is sent across the DVI cable using TMDS signaling. The DVI spec allows for two different clock encoding/decoding mechanisms, coherent and non-coherent. Unfortunately, the spec does not give a way for the transmitter to figure out which method the receiver is using. And only some transmitters can switch from one mode to another. For machines which can switch transmit modes we sometimes hard code into our drivers which type of receivers certain monitors use. One of the bad effects of having mismatched transmitters and receivers is increased jitter, which leads directly to reduced usable bandwidth. (you ought to know that everything is really analog) "
    One suggested solution is to use a repeater of some sort, such as converting to ADC and back again to DVI. Apple's converter supposedly has a non-coherent transmitter.

Maybe you are looking for