Nxagent - cliente rejected help

I am trying to use nxagent to run a session like Xnest to run a DE like compiz. I run the server like this
nxagent :1 -geometry 1024x768
in a new terminal i
export DISPLAY=:1
when i go to test and run say gedit, i get this error from the nxagent server terminal.
AUDIT: Sat Nov 9 06:16:05 2013: 22501 nxagent: client 1 rejected from local host
What am I missing to make this work??

1008877 wrote:
Hi to all,
at the moment i've a server Orable with version 9.2 and on client XP i use client 9,
but now i will need to move the client to win 7 32bit, i tried to install oracle client 9 but expain some error during the installation
I tried to install oracle client 11 r2 but with net assistant i can contact the DB
Please help me
Regards
SantinoV11 client software can access V9 DB when properly installed & configured.
V9.2 Oracle is obsoleted & unsupported.

Similar Messages

Cisco ISE authentication failed because client reject certificate

Hi Experts,
I am a newbie in ISE and having problem in my first step in authentication. Please help.
I am trying to deploy a standalone Cisco ISE 1.1.2 with WLC using 802.1x authentication. The user authentication configured to be checked to ISE's internal user database for early deployment. But when the user try to authenticate, they failed with error message in ISE :
Authentication failed : 12321 PEAP failed SSL/TLS handshake because the client rejected the ISE local-certificate
I've generate a certificate for ISE using Windows Server CA and replace ISE's self-signed certificate with the new certificate but authentication still failed with the same error message. Must I generate a certificate for WLC also? Please help me in solving this problem.
Regards,
Ratna

Certificate-Based User Authentication via Supplicant Failing
Symptoms or
Issue
User authentication is failing on the client machine, and the user is receiving a
“RADIUS Access-Reject” form of message.
Conditions (This issue occurs with authentication protocols that require certificate validation.)
Possible Authentications report failure reasons:
• “Authentication failed: 11514 Unexpectedly received empty TLS message;
treating as a rejection by the client”
• “Authentication failed: 12153 EAP-FAST failed SSL/TLS handshake because
the client rejected the Cisco ISE local-certificate”
Click the magnifying glass icon from Authentications to display the following output
in the Authentication Report:
• 12305 Prepared EAP-Request with another PEAP challenge
• 11006 Returned RADIUS Access-Challenge
• 11001 Received RADIUS Access-Request
• 11018 RADIUS is reusing an existing session
• 12304 Extracted EAP-Response containing PEAP challenge-response
• 11514 Unexpectedly received empty TLS message; treating as a rejection by the
client
• 12512 Treat the unexpected TLS acknowledge message as a rejection from the
client
• 11504 Prepared EAP-Failure
• 11003 Returned RADIUS Access-Reject
• 11006 Returned RADIUS Access-Challenge
• 11001 Received RADIUS Access-Request
• 11018 RADIUS is re-using an existing session
• 12104 Extracted EAP-Response containing EAP-FAST challenge-response
• 12815 Extracted TLS Alert message
• 12153 EAP-FAST failed SSL/TLS handshake because the client rejected the
Cisco ISE local-certificate
• 11504 Prepared EAP-Failure
• 11003 Returned RADIUS Access-Reject
Note This is an indication that the client does not have or does not trust the Cisco
ISE certificates.
Possible Causes The supplicant or client machine is not accepting the certificate from Cisco ISE.
The client machine is configured to validate the server certificate, but is not
configured to trust the Cisco ISE certificate.
Resolution The client machine must accept the Cisco ISE certificate to enable authentication.

12520 EAP-TLS failed SSL/TLS handshake because the client rejected the ISE local-certificate

Hi guys,
I have root CA and intermediate CA in ISE local certificate store trusted for client authentication.
I have imported both root ca and client certificate in the device I want to authenticate, but ISE keeps spitting out this error :
12520 EAP-TLS failed SSL/TLS handshake because the client rejected the ISE local-certificate

Refer the link for troubleshooting in page no 22 the issue is mentioned, check it: http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_81_troubleshooting_failed_authc.pdf

ISE, BYOD: win clients reject ISE local-certificate

Hello!
We are deploying BYOD with Cisco ISE 1.1.2 and WLC (5508) using 802.1x authentication.
Windows clients cannot connect to 802.1x SSID with the following error on ISE:
Authentication failed : 12321 PEAP failed SSL/TLS handshake because the client rejected the ISE local-certificate
The client doesn't have preconfigured wifi profile or root certificate installed.
The concept of BYOD suppose that you can connect your device without any installed certificates and preconfigured wifi-profiles.
The problem is that Windows 7 supplicant does not send TLS alert in pop up window, when connecting to 802.1x SSID.
If this alert is seen, than you can accept it and proceed the connection. After that you will be asked to install ROOT-cert, get your own cert and etc.
So, the question is: how to make the windows supplicant to show the pop-up window with TLS alert?
p.s. the attached file shows the example of pop up TLS-alert window

Are there any recommendations from Cisco about the issue with Windows?
I believe there's a new version of smart solution design guide coming up.
The current one does not mention anything to do with certs in "User Experience" chapter.
You can check one of the possible approaches in Nico's document:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml
(It can be easily expended).
I think irt. PEAP we will always say that the cert or the root/sub CA cert should be already trusted on the device when perfoming enrollment.
Will try to dig in, can't say I promise to get something concrete though.

[b]EJB Hotel RA Client Error - HELP[/b]

1. Travel schema installed fine
2. Web Client can successfully be run and all the buttons
work fine
3. The only file I modified was in config properties.
Provider_Url = ormi://localhost:8888/OneEJBHotel
4. in oc4j directory: principals file:
user id is "admin", and password was given as
"admin"
4. deployment from jdeveloper is fine as follows:
---- Deployment started. ---- Jan 24, 2003 6:24:08 PM
Wrote EJB JAR file to C:\oc4j\samples\ejb\OneEJBHotel\src\oracle\otnsamples\OneEJBHotel\OneEJBHotel.jar
Wrote WAR file to C:\oc4j\samples\ejb\OneEJBHotel\src\oracle\otnsamples\OneEJBHotel\OneEJBHotel-Web.war
Wrote EAR file to C:\oc4j\samples\ejb\OneEJBHotel\src\oracle\otnsamples\OneEJBHotel\OneEJBHotel-Web.ear
Invoking OC4J admin tool...
C:\jdeveloper\jdk\jre\bin\javaw.exe -jar C:\jdeveloper\j2ee\home\admin.jar ormi://DLEE/ admin **** -deploy -file C:\oc4j\samples\ejb\OneEJBHotel\src\oracle\otnsamples\OneEJBHotel\OneEJBHotel-Web.ear -deploymentName OneEJBHotel
Auto-unpacking C:\oc4j\j2ee\home\applications\OneEJBHotel-Web.ear... done.
Auto-unpacking C:\oc4j\j2ee\home\applications\OneEJBHotel-Web\OneEJBHotel-Web.war... done.
Copying default deployment descriptor from archive at C:\oc4j\j2ee\home\applications\OneEJBHotel-Web/META-INF/orion-application.xml to deployment directory C:\oc4j\j2ee\home\application-deployments\OneEJBHotel...
Auto-deploying OneEJBHotel (New server version detected)...
Exit status of OC4J admin tool (-deploy): 0
C:\jdeveloper\jdk\jre\bin\javaw.exe -jar C:\jdeveloper\j2ee\home\admin.jar ormi://DLEE/ admin **** -bindWebApp OneEJBHotel OneEJBHotel-Web http-web-site /OneEJBHotel
Exit status of OC4J admin tool (-bindWebApp): 0
Use the following context root(s) to test your web application(s):
http://DLEE:8888/OneEJBHotel
Elapsed time for deployment: 14 seconds
---- Deployment finished. ---- Jan 24, 2003 6:24:22 PM
5. System Configuation
jdeveloper: 9.0.3.1035
DB: oracle 92010
oc4j: 9.0.3.0.0
6. When run from jdeveloper client: run Client.jpr
the following errors were generated:
Process exited with exit code 0.
C:\jdeveloper\jdk\bin\javaw.exe -ojvm -classpath C:\oc4j\samples\ejb\OneEJBHotel\src\classes;C:\oc4j\samples\ejb\OneEJBHotel\config;C:\oc4j\samples\ejb\OneEJBHotel;C:\oc4j\samples\ejb\OneEJBHotel\src\web;C:\jdeveloper\jdev\lib\jdev-rt.jar;C:\jdeveloper\j2ee\home\lib\activation.jar;C:\jdeveloper\j2ee\home\lib\ejb.jar;C:\jdeveloper\j2ee\home\lib\jaas.jar;C:\jdeveloper\j2ee\home\lib\jaxp.jar;C:\jdeveloper\j2ee\home\lib\jcert.jar;C:\jdeveloper\j2ee\home\lib\jdbc.jar;C:\jdeveloper\j2ee\home\lib\jms.jar;C:\jdeveloper\j2ee\home\lib\jndi.jar;C:\jdeveloper\j2ee\home\lib\jnet.jar;C:\jdeveloper\j2ee\home\lib\jsse.jar;C:\jdeveloper\j2ee\home\lib\jta.jar;C:\jdeveloper\j2ee\home\lib\mail.jar;C:\jdeveloper\j2ee\home\oc4j.jar oracle.otnsamples.OneEJBHotel.client.EJBHotelSample
javax.naming.NamingException: Lookup error: java.io.IOException: Server protocol was not ORMI, if uncertain about the port your server uses for ORMI then use the default, 23791; nested exception is:
     java.io.IOException: Server protocol was not ORMI, if uncertain about the port your server uses for ORMI then use the default, 23791
     java.lang.Object com.evermind.server.rmi.RMIContext.lookup(java.lang.String)
          RMIContext.java:134
     java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
          InitialContext.java:350
     void oracle.otnsamples.OneEJBHotel.client.EJBHotelSample.getHotelSystemBean()
          EJBHotelSample.java:132
     void oracle.otnsamples.OneEJBHotel.client.EJBHotelSample.main(java.lang.String[])
          EJBHotelSample.java:147
Process exited with exit code 0.
Thanks for help!
David

David,
config.properties is used only by the client.jpr. Not by the Web.jpr
config.properties file has been provided for looking up resources[EJB, Datasources] from JNDI tree of OC4J.
Since servlet and other resources are in the same container[Single JVM] there is no need to specify the username, password, Provdier_URL at the time of lookup.
Look at the init method of EJBHotelServlet.java :
Context ctx = new InitialContext();
// Acquire the home interface handle and call the create
//method on it
homeInterface = (HotelSystemHome)ctx.lookup("OneEJBHotel");
Here servlet looks up EJB without any authentication information, as servlet and EJB are in the same container.
Whereas Stand alone client is running outside the OC4J.
So the stand alone client need to authentcate itself for looking up the resources from JNDI tree.
Look at the getHotelSystemBean method of EJBHotelSample.java :
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, prop.getProperty("Initial_Context_Factory"));
env.put(Context.SECURITY_PRINCIPAL, prop.getProperty("Principal"));
env.put(Context.SECURITY_CREDENTIALS, prop.getProperty("Credential"));
env.put(Context.PROVIDER_URL, prop.getProperty("Provider_Url") );
// Associate the properties with the context
Context ctx = new InitialContext(env);
// Acquire the home interface handle and call the create
//method on it
homeInterface = (HotelSystemHome)ctx.lookup("OneEJBHotel");
Here stand alone client looks up EJB by specifying the authentication information, as stand alone client and EJB are running in different JVM's.
Hope this helps...
Cheers
--Venky

Which WS technology to use for a SOAP client--please help

Hey guys, I haven't had very good luck getting help from these forums. Hopefully that will change
So I need to build a webservice client and am investigating technologies. The requirements are that the client submit a specific string (i.e. not specific java objects--rather the request will be passed in as a string) and store the http status code and response body.
I looked at saaj both the axis and sun implementations--the sun implementation was completely useless. If the http status code is not 200, the client throws an exception (thus I can't get at the response body which I need even in the case of an error). The axis implemention seems more useful, but I can't get the http response code from the SOAPConnection or SOAPMessage objects.
I looked at Jax WS, but it seems to require a wsdl/xsd and I don't have one.
Any help, please?

Hi, I wasn't sure where I could post this question.
If you think this question should be replaced to
another part of the forum, please do so.
I'm trying to find out how I can do jaxx, not using
it in swing, but using it in a j2ee web environment.No I don't think so. What do you mean? It creates Swing components not HTML form widgets.
Have you thought of XSL maybe?

"Apps"-Tab won't load in Creative Cloud Client - please help

I just made the subscription for the Creative Cloud and installed the client - but it's not working.
When I click on "Apps" to install the Adobe Apps (obviously) it just loads and loads without stopping. As a result, I'm not able to install the apps and therefore I can't use the cloud I'm paying for.
I know I'm not the only user with this problem. Please help!
(And I don't want any "have a chat with a professionell"-offers. I want a real solution)

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430

I have ADOBE CC After Effects, but need CS6 so I can make files for client. Help please

I've been working in ADOBE CC as I have Creative Cloud, but I have a client who needs things made in CS6 and I need to make sure before I send (he's one of 'those' clients).
I've had a look, but can't see now to do it. Help please.

Jeff,
Sorry for the delayed response.
I'm running Windows 7; 64-bit.
Version:
2.0.4000.0
I'll keep trying.
-JJ

Instant Client Installation help

Hello
I'm relatively beginner. I'm having a win2k machine which i want to setup as a client to oracle 9i server which i'm able to telnet and work. What should i do??. I have downloaded (instant client basic + odbc) and set the path...install from the batch file.. but it didn't work when i tried to add instant client in odbc datasource administrator.It shows could not load setup or translator lib. Please help.

hrrmmm ... a year later and I'm having exactly the same problems. Anybody have a solution to this one? It looks like the driver proxy that was installed cannot find some dependent DLLs, but that's just me guessing.
I have installed the basic package, and I can connect with SQLPlus (and the JDBC drivers). Now I want to connect and ODBC app (windows, yech) to the db, so I unpacked the ODBC addon, set PATH, and ran the odbc_install.exe (which reported success). Trying to create a new datasource, however, yields:
"The setup routines for the Oracle in instantclient10_1 ODBC driver could not be loaded due to system error code 5."
"Could not load the setup or translator library"
Anyone have suggestions?

HTTP Client VIs help or examples?

I am trying to use the HTTP Client VIs to implement a version of the C# code found HERE. Unfortunately there are no NI examples of how the client VIs are to be used and my various attempts to string them together only seem to result in "Error 42" (LabVIEW: Generic Error) from the POST vi, rather than returning the headers and body text.
I have also tried using DOTNET calls and was at least able to get the login page returned but could not seem to trigger the login.
I switched to the HTTP Client VIs because they offered an alternate hope and I could at least see where to attach a cookie file with them (though a cookie file may not be the same as reserving space for a session cookie).
Solved!
Go to Solution.
Attachments:
HTTP_Client VI.jpg ‏61 KB
DotNet VI.jpg ‏120 KB

Hello Warren,
At this point, your best reference is probably the LabVIEW help documentation on the HTTP client VIs you are using, but here are a few examples that might offer some insight as well:
Easy HTTP Client VIs
https://decibel.ni.com/content/docs/DOC-22383
Reading Coordinates Information from Google Maps Web Services Using HTTP Client VIs
https://decibel.ni.com/content/docs/DOC-20762
Additionally, it looks like there was an issue addressed in LabVIEW 2011 related to the Post VI and Error 42 when downloading large files (see CAR 251094 in the 2011 release notes), which might apply in this situation.
I would recommend contacting our support directly to troubleshoot the error you are seeing, particularly as it is so generic. If the lack of examples is a hindrance, definitely create a product suggestion at http://digital.ni.com/applications/psc.nsf/default?OpenForm or by posting on the LabVIEW Idea Exchange (http://forums.ni.com/t5/LabVIEW-Idea-Exchange/idb-p/labviewideas .)
Tom L.

Local Client copy - help needed

Hello ,
I have to perform a client copy without data.
Can you please let me know, which profile I should use ?
SAP_ALL All Client-Specific Data w/o Change Documents
SAP_APPL Customizing and Application Data w/o Change Docs
SAP_APPX SAP_APPL w/o Authorization Profiles and Roles
SAP_CUST Customizing
SAP_CUSV Customizing and User Variants
SAP_CUSX Customizing w/o Authorization Profiles and Roles
SAP_PROF Only Authorization Profiles and Roles
SAP_UCSV Customizing, User Master Records and User Variants
SAP_UCUS Customizing and User Master Records
SAP_UONL User Without Authorization Profiles and Roles
SAP_USER User Master Records and Authorization Profiles
Thanks in advance for your help!
I would vote for:
SAP_UCSV Customizing, User Master Records and User Variants
SAP_UCUS Customizing and User Master Records
Daniel
Edited by: Daniel_Bul on Mar 7, 2012 11:22 AM

Hi,
SAP_CUSX would be better if you dont want the same user master data in both the clients otherwise you can go ahead with SAP_UCSV .
Regards,
Nirmal.K

WDS - Client Configuration Help

Hi All,
I have many ap1252ap's, I have configured WDS on the one ap and it authenticate to itself OK - to the locally configured radius server.
state = wlccp_ap_st_registered
The problem is that I do not know where to go from here.
I have followed the docs (Fast Roaming, WDS) but I cannot get very far, in fact I do not think that my clients are even attempting to authenticate with my AP. I have modified the following taken from the sraom doc,
AP# configure terminal
AP(config)# dot11 ssid fastroam
AP(config-ssid)# authentication network-eap eap_methods
SSID CONFIG WARNING: [fastroam]: If radio clients are using EAP-FAST, AUTH OPEN with EAP should also be configured.
AP(config-ssid)# authentication key-management cckm
AP(config-ssid)# exit
AP(config)# interface dot11radio0
AP(config-if)# encryption mode ciphers ckip-cmic
AP(config-if)# ssid fastroam
AP(config-if)# exit
AP(config)# end
But something is still not right or missing. I have added users (or at least I think I have from an authentication point of view) with the username and password as the MAC of the clients to the local radius server, using command
ap(config-radsrv)#user xxx password xxx
But i do not understand how this links in with the client, basically how do I configure a client to attach using cckm, where do i put in a username and password for the network profile, if i pick leap, then I am prompted for the username/password, but what username/password is this, is it the username/password entered with
ap(config-radsrv)#user xxx password xxx
Any help would be much appreciated.
Regards

Hi,
Thankyou for reading my Post, I have managed to work out how to configure my WDS with usernames and passwords, if anybody else is interested, this is what I did.
dot11 ssid fastroam
authentication open eap method_clients
authentication network-eap method_clients
authentication key-management wpa
(method_client is basically a list pointing with IP of server providing WDS/Radius)
Interface dot11radio 0
ssid fastroam
encryption mode ciphers tkip
no shut
To configure user/passowords
conf t
radius local-server
user testing password testing123
then on client
athentication:
configure LEAP
user: testing
password: testing123
encryption:
tkip
the client should now authenticate to AP/WDS.
The only thing I have not worked out yet is how to configure a backup WDS. nor do I quite understand which of the authentication methods the client is using when it succesfully connects.
Please can you advise: When you have a username/password on the radius server, does it mean that any/or all clients can use the same username/password.
or will the radius server detect that the login is already is use and prevent another attempt. reason behind my question is that if the username/password gets into the wrong hands.
Thanks and Regards

AD + NW Client + ZCM - Help

Hi all: I just found out that the use of DLUs with Active Directory is a no-no. So I went and turned of my DLU policy for a test user group and now I can't seem to login properly, and I am completely lost.
Here is what I have:
Workstations running Windows 7 64-bit, Novell Client 2 SP3 and ZCM 11.2.4
OES servers run OES11 SP1
Active Directory runs on Windows server 2008
Passwords get sync'ed via Identity Manager eDir -> AD
I need to log into eDirectory, ZCM, AND AD, but with only one log in screen (i.e. the user only enters their username and password once). I have context-less login enabled so my users do not have to mess with context settings. Username and passwords are sync'ed one way, from eDir to AD, via IDM.
I am hoping there are some good how to's on this, but the info I have found so far has not helped out. I am able to get the Novell and AD login working together, but ZCM fails to log in.
All help greatly appreciated, Chris.

Craig: Thanks for the reply. After giving up last night I came in with fresh eyes and did discover the domain was not being set (Novell client - advanced - windows tab). When I set that I was able to log in to both the domain and eDir and ZCM.
With that said I still have several issues related to the loss of DLU. The biggest problem is how to set the user rights at the workstation. With DLU I set my admin accounts to be in the local Administrator group, but without DLU I cannot do not have local admin rights. I checked the local accounts (control userpasswords2) and my username is in the Administrators group.
The second issue is the loss of roaming profiles. I have a Roaming profile policy, and it successfully applies, but my profile is not being uploaded at logout.
Any suggestions on how to fix these issues. Thanks again, Chris.
>>> Craig Wilson<[email protected]> 2/4/2014 8:13 AM >>>
Did you make sure your PCs are joined to the domain?
If you see the normal "Client 2" logon screen, check the advanced tab
for the local Windows logon and make sure it is pointing to the domain
and not the local machine.
On 2/3/2014 8:44 PM, cmosentine wrote:
> Hi all: I just found out that the use of DLUs with Active Directory is
> a no-no. So I went and turned of my DLU policy for a test user group
> and now I can't seem to login properly, and I am completely lost.
> Here is what I have:
> Workstations running Windows 7 64-bit, Novell Client 2 SP3 and ZCM 11.2.4
> OES servers run OES11 SP1
> Active Directory runs on Windows server 2008
> Passwords get sync'ed via Identity Manager eDir -> AD
> I need to log into eDirectory, ZCM, AND AD, but with only one log in
> screen (i.e. the user only enters their username and password once). I
> have context-less login enabled so my users do not have to mess with
> context settings. Username and passwords are sync'ed one way, from eDir
> to AD, via IDM.
> I am hoping there are some good how to's on this, but the info I have
> found so far has not helped out. I am able to get the Novell and AD
> login working together, but ZCM fails to log in.
> All help greatly appreciated, Chris.

Pause before client requests. help plz!

hey i have a program that creates a bunch of clients. these clients send http requests to a server and log the responses. currently i have it so each client sends 5 requests, one after the other. the problem is, right now there is a pause between each request. so if i make like 1000 clients, they all send the first requests, and wait until all the clients have sent the first request, then theres a long pause, and then they all start sending the second request. same with secodn to third etc. my code isn't written this way however. it is written so that when a client finishes a first request, it should automatically start the second request. anyone have any idea why this is happening? i can post code if you want but its a little confusing cause i pull the requests from a file and store in array lists and junk like that, so you can't see everything in just the run() method.
just wondering if anyone has any suggestions???

Hi
Actually it is not at all possible for a solution to the problem like this without having a look at the code [entire code i mean]
So if it is not so secret that you can post the code that would be helpful to you and others to help.
Or if you want u can mail me at [email protected]
Take care and smile always

N95 delete email client (gmail) help?

I have difficulties with the email client of my N95 8gb. I'm using Gmail via IMAP. It worked great, until I decided to enable all mails instead of the standard 30 emails. No my phones keeps crashing. I tried to delete gmail, but somehow it is still on my phone. Not when you check the mail boxes (it is not there), but I still can select it via personal settings in the standby modus.... and it still uses the memory of the phone.
How can I delete it properly??
Thanks...

Hi - I've just tried doing this on my N95 and in Active Standby mode, I don't see the Gmail link ... it gets deleted when I delete the account.
I'm not sure what file you're referring to when you talk about the "existing" mailfile, but as long as you take a copy so you can put it back if it doesn't work then there shouldn't be any harm in deleting it to see if it solves your problem.
The last thing you can try, although it's a bit drastic, is to take a backup of your phone via the Memory Card program on your phone, then wipe it using the *#7370# code, and then restore the backup from your phone - note that you should also take a backup of your phone using the Content Copier program in PC Suite as well as a double back up. After restoring your data you will have to reconfigure bits of your phone like the security code etc. as they will be reset to the default.
I've done this procedure several times and have had no problems - but it's always best to be safe ! Also depending on what firmware version you're running, if you do the memory card backup it won't save your calendar information so this is another thing to be careful of. You can configure PC Suite to sync this information to Outlook or Outlook Express and then transfer it back though ...
However you need to be aware then essentially when you type the *#7370# code in you are wiping the phone back to factory defaults - so you'll have to reinstall any applications you have installed from the phone etc.
Hope this helps - let me know how you get on.
Regards,
Edward

Nxagent - cliente rejected help

Similar Messages

Maybe you are looking for