O site Navegaki tornou-se meu site padrão de busca e não consigo desistalá-lo. Como fazer?

O site Navegaki está instalado em meu pc e mesmo já tento instalando e desinstalado o mozilla, internet Explorer e chrome seguindo as recomendações de desinstalação do próprio site, o mesmo não some do meu pc... Estou a ponto de chutar o computador... Será que poderiam me ajudar?? Obrigada!

Siga esse passos:
# Clique no botão de menu [[Image:New Fx Menu]] e depois em complementos
# Na janela Gerenciador de Complementos, selecione a aba Extensões.
# Selecione o mecanismo de pesquisa que deseja remover.
# Clique no botão Remover.
# Clique em "Reiniciar agora" se for exibida essa opção. Suas abas abertas serão salvas e restauradas após o reinício.
Depois de reiniciar o Firefox instale [https://addons.mozilla.org/pt-BR/firefox/addon/searchreset/ Search Reset Tool]. Isto irá remover o resto dos traços deste programa no Firefox.
Para maiores informações, por favor leia [[Remove a toolbar that has taken over your Firefox search or home page]].

Similar Messages

Exchange Server 2010 Mailflow between Internet Facing-Site and No Internet Facing-Site

Hi all,
My environment there are two sites, Internet Facing-Site and No Internet Facing-Site.
The mail flow between them, it isn't working. The messages stuck in the queue.
Default Receive Connector No internet facing-site is configured, bellow:
Defaul....
- Transport layer....
-Basic Authentication...
- Exchange Server Authentication.
- Integrated windows....
Configuration the Internet Facing-Site, bellow:
From intenet
- Transport layer....
-Basic Authentication...
- Integrated windows....
And i configured a new receive connector on the Internet Facing-Site, follow bellow:
Sites
- Transport layer....
-Basic Authentication...
- Exchange Server Authentication.
- Integrated windows....
But, the messages yet stay stuck in the queue.
Queue error:
451 4.4.0 Primary target IP address responded with: “421 4.2.1 Unable to connect.” Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
I'm needing help, pls.

Please check SMTP traffic filtering/scanning enabled on the router/firewall. You can telnet even if the SMTP
traffic filtering/scanning enabled on the router/firewall. But emails will not pass through if the configuration is incorrect.
May be speed between sites causing this issue (not sure). Anyway please try changing the Tarpitinterval as a test.
To see the current setting "Get-ReceiveConnector | Select name,tarpitinterval "To set new value "Set-ReceiveConnector “<Connector-Name>”
–TarPitInterval:00:00:010"
Try restarting "MSexchange-Transport-sevice" on both servers as well
Can you send email one-way or
both ways not working?
MAS

Video no longer plays from sites on comedy central. Site says browser must be updated, but I have installed all updates and restarted the computer..twice.

Video no longer plays from sites on comedy central. Site says browser must be updated, but I have installed all updates and restarted the computer..twice.

If it is any consolation this started happening to me today. I am in Toronto. I am wondering if there is a copyright issue here. I have done nothing to solve it - mostly because I suspect this has nothing to do with my computer.
p.s. My speculation about copyright is not correct. Comedy Central plays fine with Google Chrome. Have not yet tested Firefox.

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

Hi,
According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
Here are some detailed articles for your reference:
https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

How to generate site wise report for multiple sites running on single MDEX

Hi all,
I have single instance of MDEX 6.2 and Exprience Manager.
I have created some pages in workbench and set the specific trigger for all pages.
These pages are called from 2 different sites I have differentiated these 2 site by user profile. All is working fine for me.
But, Now I want to show the reports, right now the reports are displaying with combination of both sites result.
Is there anyway which I can display reports with site wise.
Thanks in advance,
Sunil N.

Hi Sunil,
You need to customize the reporting. You can log site specific parameter [for example site=abc/xyz] and then update the reporting to read and display reports site-wise.
Thanks
MS

Granting users Site admin to All site collections and/or Adding an o365 group by email to site admin group on all Site collections

We will have 1000s of site collections.
Why doesn't SharePoint Online 2013 offer a way to grant a user or a group Site admin rights to all site collections?
And.. if we must add the user to every single site, can this be done by an o365 or ADFS group using it's email?
We'd like to run this script to add a group to site collection admin on all sites, but Groups can't be referenced by an email?
Get-SPOSite|foreach{Set-SPOUser -Site $_.Url -LoginName [email protected] -IsSiteCollectionAdmin $True}
produces an error. And if we try to add the group by email manually through the UI it can't find it either. We've tried this with o365 groups and ADFS groups.
Any way to reference these groups from PowerShell?
Is this limitation there for a reason?

bump.. anybody?

Where can I find the web site ID of a project site in Project Server 2010?

Hi, I need to find the ID of the project site of a project in Project Server 2010 in order to be able to identify that web site in the Sharepoint Content DB (in the reporting DB, in Projects_View appears the URL of the project site but not its web
site ID). I need to list the documents stored in the project sites of the projects contained in the Project Center inside PWA.
Thank you very much
Regards
Carlos Negroni

Hi Mahesh:
Thanks but what I need is to link that ID with the related project in Project Server databases. Anyway I think I'll use the FullURL information to join the tables because that information appears in the Reporting Database of Project Server (although maybe
it is not the best alternative).
Regards

How to check the user hits to the sites (most often,frequently used sites) in sharepoint 2010?

HI,
How to check the user hits to the sites (most often,frequently used sites) in sharepoint 2010?
could you please help on the above?

Hello Sudhir muvva,
Just to be sure, the default Web Analytics reports don't meet your requirements?
http://blogs.msdn.com/b/ecm/archive/2010/03/21/introducing-web-analytics-in-sharepoint-2010.aspx
Does reports have subjects like top pages and number of page views.
- Dennis | Netherlands | Blog |
Twitter

Changing the Site URL of a Sharepoint site changes the content type order

Description
Changing the Site URL of a Sharepoint site changes the content type order of all lists that
* contain folder content types
* and have a custom content type order
* where a folder content type is the first content type in order.
Reproducible behaviour
1. Create a Team Site in Sharepoint
2. Create a Task List "Test" on the Team Site
3. Go to List Settings
4. The Content Type order is by default
    a. Task
    b. Summary Task
5. Change the Content Type Order to
    a. Summary Task
    b. Task
6. Go To Site Settings "Title, description and icon"
7. Change the Site Url
8. Go To List "Test" List Settings
9. The Content Type order now is
    a. Task
    b. Summary Task
10. Select "Change New button order and default content type"
11. Here, the Content Type order still is
    a. Summary Task
    b. Task
Is this a bug? Has anyone noticed this behaviour before?
Kind Regards,
Joachim

Hi Joachim,
You are not missing something or doing something wrong. i Hope :). This behavior is reproductible.
The granularity of change is better by Powershell. But by the interface is most user-friendly.
Maybe that's the reason of this behavior.
Gilles Martinez
Twitter
Blog
Please mark as helpful/answer if this resolved your post

Missing "Save Site as Template" For Publishing Sites in Project online 2013

First I created Sub site using Project Template under the site collection.
Now I want to this Sub site Save as a Site Template. When I went for Save site as Template in site setting. Under Site Action there is no option for “Save site as Template”
marylu

"Publishing Feature" may be enabled at your site , The Publishing feature does not support the Save Site as Template option.
http://support.microsoft.com/kb/2492356
Some workaround -
http://www.learningsharepoint.com/2013/05/03/missing-save-site-as-template-for-publishing-sites-in-sharepoint-2013/
http://blogs.msdn.com/b/how24/archive/2013/06/13/save-publishing-site-as-a-template.aspx
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Using powershell to move a sub-site tree to a new site collection

I have a case where I may need to move a subsite tree from one site collection to another existing site collection.
The information I have normally seen on the web talks about creating a new site collection when moving a subsite tree.
If I am going to an existing site, then can I still do the export and import or do I need to do something else.
The manage content option is not available to me - the publishing infrastructure is not turned on the source site collection and the ramifications of turning it on are too great.
I can use powershell to perform this move.
Another situation is that the destination site collection has the SP 2010 visual upgrade, but this subsite tree does not yet have that turned on. I presume that it would be best to turn it on before I move - is there a way via powershell to turn on the visual
upgrade for a subsite tree only? I don't want to turn it on the sibling trees at this time.

Okay, after more web research, I see examples where I have to create a destination site before I import to it.
So, here's what I tried.
Export-spweb -Identity
http://myfarm/sites/e/dprojects6/CC-Sharing/ -Path d:\temp\export_cc.bak -includeusersecurity –includeversions All –usesqlsnapshot
# What template is the site?
$web = get-spweb http://myfarm/sites/e/dprojects6/CC-Sharing/
Write-host “Web Template:” $web.WebTemplate ” | Web Template ID:” $web.WebTemplateID "| Web Configuration:" $web.Configuration
$tmp=$web.WebTemplate + "#" + $web.Configuration
write-host "template:" $tmp
New-SPWeb http://myfarm/sites/e/dprojects4/CC-Sharing -Template $tmp
import-spweb
http://myfarm/sites/e/dprojects4/CC-Sharing/ -Path d:\temp\export_cc.bak -includeUserSecurity
What I ended up with was the imported data at
http://myfarm/sites/e/dprojects4 instead of in
http://myfarm/sites/e/dprojects/4/CC-Sharing/ .
I am working on recovering things so I can try this again. It is not obvious to me what
I did to cause the results I had.
When I look in the import log I see:
[3/18/2014 7:30:14 AM] Progress: Starting content import.
[3/18/2014 7:30:14 AM] Progress: De-Serializing Objects to Database.
[3/18/2014 7:30:14 AM] [Web] [CC-Sharing] Progress: Importing
[3/18/2014 7:30:14 AM] [Web] [CC-Sharing] Verbose: Importing Web
http://myfarm/sites/e/dprojects4/CC-Sharing.
[3/18/2014 7:30:14 AM] [Folder] [] Progress: Importing
and yet when I went to
http://myfarm/sites/e/dprojects4/ I found the contents of CC-Sharing.
Does this kind of thing sound familiar to anyone?
Thank you all for your help.

Where does a sharepoint admin find the site settings for a mysite site collection?

We are using sp 2010 service pack 2.
When I look at another user's mysite, logged in as an admin (spsadmin2 is my daily admin type account), I don't seem to have access to the site settings.
However, if I log in as the fundamental farm admin account (spfarm), I do see the site settings drop down.
The site settings I see are not the site settings for a specific user's site collection. It is, instead, the settings for "mysites" in general.
So, how can I look at the site settings for a specific user's site collection?
I wanted to be able to look at their site collection recycle bin to see if something deleted was still there.
Thank you!

So, our mysites are associated with a web application separate from our other sharepoint sites.
The mysites root site collection has our SharePoint admins listed as full control owners.
The SharePoint admins also are listed as Farm admins.
Because there is only 1 secondary site collection owner permitted, if that is the means by which someone gets access to the site collection settings and permissions, then it seems like we would have to keep changing the secondary owner quite frequently.
You mentioned being able to set permissions on "the group" to have rights.
Which group? The Personal Sites Owners group of our mysites web app? Or another group?
Thank you for your help!

Unable to apply a new site template to a new site collection's root web

Hi folks,
Using PowerShell I need to create a new site collection and add a new site template to its root web. I've tried but failed...
I created the site template from a team site that I modified and then saved it as a site template and saved the template to an WSP file (in the solutions gallery).
I have tried both of the following methods but can't find the template to add to the root web of the site collection. Help!!
Method 1 - Create the site collection, deploy & install the template as a user solution, and apply the template
I did the following, but it doesn't work because Get-SPWeb doesn't find it. If I run Get-SPWeb with no parameters the list it returns doesn't include my template. So site.GetWebTemplates includes it but Get-SPWebTemplate doesn't.
# Create the site collection
$site = New-SPSite $siteURL -OwnerAlias $owner -SecondaryOwnerAlias $secondOwner -name $studentName -Description $description
# Deploy and install the template
$wsp = Add-SPUserSolution -LiteralPath $wspPath -Site $siteURL
$wsp = Install-SPUserSolution -Identity $wspIdentity -Site $siteURL
# Assign the template.
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates)
Write-Host $child.Name
If ($child.Name.EndsWith("ABC")
# the name of the template that I added ends in "ABC" - when this script runs I the name of my
#added template displays as "{longGUID}#1ABC"
$template = $child
$templateID = $child.Name
$template = Get-SPWebTemplate $templateID
# regardless of whether I assign $template above or here the Set-SP_Web assignment below fails
$web = Get-SPWeb $siteURL
$web | Set-SPWeb
-Template $template
Method 2 - Deploy and install the template as a farm solution, create the site collection, and apply the template
I did the following. After I did the first section (deploy and install the solution to the farm) I was able to go to "Manage Farm Solutions" in CA and it was listed there, but neither
site.GetWebTemplates nor Get-SPWebTemplate included the site template in their list of templates.
# Deploy and install the solution to the farm
$template = Add-SPSolution -LiteralPath "C:\SharePoint\Student Site.wsp"
$template | Install-SPSolution
Do {Start-Sleep 2 } while (!((Get-SPSolution $template).Deployed))
# Create the site collection
$site = New-SPSite $siteURL -OwnerAlias $owner -SecondaryOwnerAlias $secondOwner -name $studentName -Description $description
# Assign the template.
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates)
      Write-Host $child.Name
        If ($child.Name.EndsWith("ABC")
# the name of the template that I added ends in "ABC" - when this script runs I the name of my
#added template displays as "{longGUID}#1ABC"
                        $template = $child
                        $templateID = $child.Name
$template = Get-SPWebTemplate $templateID
# regardless of whether I assign $template above or here the Set-SP_Web assignment below fails
$web = Get-SPWeb $siteURL
$web | Set-SPWeb
-Template $template
David

Out of curiosity, are you able to create a site within a site collection using this template? That is, can you create a site that is not the root site (e.g. http://sharepoint/sitecollection/Web)?
Jason Warren
Infrastructure Specialist
Habanero Consulting Group
habaneroconsulting.com/blog

Can a muse site migrate to a wordpress site?

I made a web site in Muse now my client wants me to migrate the whole site to a wordpress hosting site. Can this be done?

There is no easy way to do that. Wordpress requires PHP and WP specific coding. It would break all compatibility with Muse for sure.

Site group and list of site

Hi Experts,
I have a requirement where I will be getting site group code,using which I need to find the list of site numbers that are currently part of the requested Site Group and send it back. In which table I can find the list of site numbers related to the site group code or Is there any function module to find the same.
Thanks & Regards
Sridevi S

Hi,
Use the function module "CLAF_OBJECTS_OF_CLASS". Pass following paramters
CLASS : <Site Group>
CLASSTEXT : 'X'
CLASSTYPE : 030
Output internal table structure T_OBJECTS will have the list of Sites assigned to this site group.
Regards
Vinod

O site Navegaki tornou-se meu site padrão de busca e não consigo desistalá-lo. Como fazer?

Similar Messages

Maybe you are looking for