OAF iProc Receive Items Page VO restrict for one Organization

Hi,
In Internet Procurement responsibility we have Receive Items page.
Requirement is to not show records from one Inventory/Expense Organization.
I could achieve this by extending VO
oracle.apps.icx.por.rcv.server.ReceiveMyItemsVO
Is there any other way to not to show PO's from particular inventory/Expense Organization ?
Appreciate Your help.
Thanks,
Jit

Hi Braj,
Thanks for your reply.
RcvSrchCO is the controller. As this is a standard form, From controller it calls am.invoke_method("init_query",some Parameters);
Actual vo.execute is happening inside AM. As the pages are diff eg Receive,Return,Correct Co are also different.
I am planning to extend 5 VO's to accomodate this change.
Appreciate your help.
--Jit

Similar Messages

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Received notice of an update for one of my apps and when I tried to update the message reads "Account Not in this store" i must switch to a Canadian store before purchasing

Received notice of an update for one of my apps and when I tried to update the message reads "Account Not in this store" i must switch to a Canadian store before purchasing. I deleted app and tried to download again but still got the message. Anyone know how to fix? FYI have had phone for 2 years and this is the first time this has happened.

The Apple id that you created do you remember if you created with your region sellected as Canada or US. If so you can change Region directly on your device by clicking on App Store icon, Scroll to bottom and tap your app is, click view acct and change region

JSP page doesnt load for one user on machine1, but does 4 all on same box

Hi,
I have a Citrix application on a box to enable many users to connect remotely to different applications on differnt boxes using the browser on this box. Just like terminal Services or remote desktop
I tested 15 users and all of them are able to login to the machine and able to open a jsp page of an application located on a differernt box using the browser on this box.
But for one user I am facing an issue. For this user, I am not able to get the page and instead I only see a message as "page loading" and nothing more than that, Its getting stuck there itself with no progress.
Please help me,
Thanks a lot in advance,
Srinivas.

Hi,
I suspect there is something missing as far as the JRE for this guy is concerned. Sothing to do with permissions. java policy, security etc.
I am not sure if that helps. I am not in the development of the application, and will check with those guys. I only neeed to provode support on this machine and be able to give access to that application which is on Linux. The browser is in Windows machine,
Thanks,
Srinivas.

Adobe 9 standard printing two sheets per page but set for one - win7 pro

I have a copy of Adobe 9 Standard on a Windows 7 64 bit OS. Printing from this product results in a "booklet" style output with two pages per sheet. All options are set for one page for sheet both in Adobe products and in the printer prefs. Has anyone seen this before or have any clue as to where I should look for what I am missing?
Thanks.

Are you using the Adobe PDF printer or PDF Maker. The settings for these two methods are set in different places and that may be the issue.

Deferred task just for one organization

Hi,
Is there a way to configure deferred task to run on just one organization? We need to have a deferred task for contractors to notify the manager about the upcoming expiry date etc., Since the number of contractors are usually a small number, it would be much more efficient if we can let the scanner scan users objects just in contractor organization.
Does anybody know what exactly the deferred task scanner does to find out that there is a task that needs to be executed. Does it go fetch the entire user object and then parse the user object xml for the list of tasks? Or does it do something more efficient?
Just want to know some internal works to just get an idea of how efficient or inefficient the whole process is.
Thanks
-Kamal

I actually run through all records with this
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='removeDeferredTask'/>
<Argument name='type' value='User'/>
<Argument name='name' value='$(employeeid)'/>
<Argument name='task' value='SD_WFP_DailyTerminateUserProcess'/>
</Action>
<Action id='1' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='removeDeferredTask'/>
<Argument name='type' value='User'/>
<Argument name='name' value='$(employeeid)'/>
<Argument name='task' value='SD_TerminateProcess'/>
</Action>
<Action id='2' application='com.waveset.session.WorkflowServices'>
<Condition>
<notnull>
<ref>termdate</ref>
</notnull>
</Condition>
<Argument name='op' value='addDeferredTask'/>
<Argument name='type' value='User'/>
<Argument name='name' value='$(employeeid)'/>
<Argument name='task' value='SD_TerminateProcess'/>
<Argument name='date' value='$(termdate)'/>
</Action>
I thought this will delete all old tasks (SD_WFP_DailyTerminateUserProcess) and re-assign the new one (SD_TerminateProcess). But today I still see 'SD_WFP_DailyTerminateUserProcess' running. Is there a way to find all DeferredTask assignments, to make sure that SD_WFP_DailyTerminateUserProcess tasks have been removed and SD_TerminateProcess assigned?
I can query database if needed. I need to figure this out asap, this is a production server. thanks

Changing Costing Type for one organization

Hello,
We have (2) organizations. In one organization our cost stucture is standard costing (first in first out). In our other organization it is set as average costing. We need to change this organization from average costing to standard costing (first in first out).
The question I have is, what needs to be done to do this? In addition, should we have any concerns on when the switch is made. ie. End of Month, End of Quarter, End of Year.
Thanks in advance for any help!

Dear User
It is simple, in ORG-2 u need to change your Cost method from Avg to Standard.
Assume, for ORG-2 your Periods start from Jan to Dec.....in your case, lets say for Jan10, you close your period and performed the AVG costing and send it to GL.
Now you want to change for FEB-10 your cost method should be Standard, Here you need to do certain standard set ups and that will take care for ORG-2. Once you did this set up, u can view the costing method under Std cost method irrespective of Monthly/Qtryl/Half yrly and for this, there won't be any issue.
Regards
Raj

How to make the OAF page Read-Only for one Responsibility?

I have a requirement to make the entire OAF page to Read-only for particular Responsibility.
Is there any direct option to make page Read-only ?
Can anyone suggest some solution?

Hi,
Check one article on
http://www.applikast.net/technical/oa-fwk/misc/making-an-oa-framework-page-readonly
or you can do Personalization for each item on page.
Thanks,
Abhi

Two receiver file adapters : Introduce delay for one specific channel

Hi All,
I have two receiver file communication channels and I want to achive the below :
CC1
CC2 are the two comm channels.
They write some data to the target system for which the sequence of writing it may become important and hence i want to ensure that
CC1 creates the file first.
and then CC2 creates the second file.
Is this possible without BPM?
Regards,
Amol

Amol,
Not sure of the exact flow, but if you have multiple Inbound Interfaces in the Interface Determination [One for each file , etc ] and you have selected the Option Maintain Interface Order at Runtime , the Files will be written to the target sequentially.
I have tried this and every time the Time stamp of the file at the OS level was always different and the first file was written after the next one. Ofcourse the amount of seconds of delay is not under our control but if all you need to ensure is the files are created sequentially then this should do the trick.
Regards
Bhavesh

Open Item Management Check box for GL Account

Hi,
I need to activate Open Item Management check box for one GL Account. But it is not accepting since few postings were there in that GL Account.
Kindly help me how to activate Open Item Management Check box for GL Account.
Thanks
KB
Moderator: Please, search SDN before posting; this question has been answered dozens of times

Hi,
Check the below link. It might be useful for you.
Open item management status change
regards,
Radhika.

Restriction for Profit centers

Hi All,
I have an issue here. The client wants the following requirement:
A set of users needs to be given access to post all the GLS available in FBCJ, wherein the users should get restricted at Profit center level.
Manual posting through FB50, Fb01 and F-02 should not get affected with this. They have been using validations for this till now.
How do i go ahead with authorisation object in this scenario. If authorisation object and roles can be used in this, please tell me in detail what all objects i need to use for GLs, PCs, Tcodes and User Names.

Friends,
         What i found out is we cannot have both hierarchical and flat restriction for one role.The following scenario best explains that..
      let us say we have restricted 0PROFIT_CTR for values P001,P002,P003 and at the same time we have restricted on hierarchy.
      Through this we can succesfully restrict queries which have flat list display of Profit center but for the queries which display result in hierarchy it fails because the query that is framing up for hierarchical display is having the following condition in its select statment
           0PROFIT_CTR=;
        for which we are not authorized.
    So we can have only either Hierarchical restriction or flat list restriction for one role.
     Please if anybody find it incorrect I request them to share their knowledge with me.
Hansjörg Luzi thanks for the help.
Thanks & Regards
Mrutyunjay

11.5.9/OAF 5.7 : how to add new fields in iProc "search results" page

We need to add new fields into iProc "search results" page - "Personalize Self-Service Defn" is et, we can enter the personalization screens (from both the "master" link at top/right page level or from the link above the region) - anyway cannot find how to add new fields. Do we have to go to AK developer and/or XML files or is it feasable from OAF (as it is with 11510) ? TIA.

It depends on what fields you want to add.
1. If Oracle has included the fields, just render them via personalizations
2. If they are brand new fields:
a) you will need to extend the VO (I do not know the exact name).
b) change the query to get your extra db columns if necesary
c) add transient attributes to the VO and map them to b).
d) Then you need to add the items via personalization and map them to the attributes you created in c)
Check on metalink for the lates version of OAF Dev Guide and Personalization guide.
Thanks
Sandeep

I transferred a pages file from ipad to mac (also pages) via email for editing. However received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately. Ideas?

I transferred a pages file from ipad to mac (also pages) via email for editing. It opened normally. However, after editing, received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately and presumed they would work without a hitch. Am I missing something?

It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

Receiver objectype (B1i 8.8) for price catalog or item price intheGeneral

what is the receiver objectype (B1i 8.8) for price catalog or item price
in the Generate of BizPackage and BiU where my sender objecttype is ECC6_Pricat (to be created)?
Edited by: Elson Wong on Feb 28, 2012 4:35 PM

If i correctly understood your problem, i think you have to manage (in your trasformation) the section between <Items_Prices> and </Items_Prices>.
<?xml version="1.0" encoding="utf-8" ?>
<BOM xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms">
<BO>
     <AdmInfo>
          <Object>4</Object>
          <Version>2</Version>
     </AdmInfo>
     <Items>
          <row>
               <ItemCode>AAAAAA</ItemCode>
               <ItemName>BBBBBBBBB</ItemName>
          </row>
     </Items>
     <Items_Prices>
          <row>
               <PriceList>1</PriceList>
               <Price>27.400000</Price>
               <Currency>EUR</Currency>
          </row>
          <row>
               <PriceList>2</PriceList>
               <Price>0.000000</Price>
               <Currency>USD</Currency>
          </row>
     </Items_Prices>
     <ItemWarehouseInfo>
          <row>
          </row>
     </ItemWarehouseInfo>
     <ItemPreferredVendors>
     </ItemPreferredVendors>
</BO>
</BOM>
BR

Is there a Pages for MAC OS 10.7.x? If not, what is the alternative? Concrete issue is that I have received a .pages document and need to edit. Many thanks

Is there a Pages for MAC OS 10.7.x?
If not, what is the alternative?
Concrete issue is that I have received a ".pages" document and need to edit. I am running Mac Pro with OS X 10.7.
Many thanks

It is important that you determine if the .pages document originated from Pages ’08, Pages ’09, Pages v1.7.2 (IOS 6), or was exported as Pages ’09 from Pages v5+ on OS X Mavericks. If it meets one of these criteria, then you can edit the .pages document on your Lion machine with Pages ’09 from the iWork ’09 DVD. Pages documents can not be opened with TextEdit, but can be viewed with Preview.
On the otherhand, if the .pages document was created with Pages for iCloud beta, Pages v2.2.1 (IOS 7), or Pages v5+ on Mavericks, then your only recourse is to edit the document with Pages for iCloud beta. Since Fall 2013, Apple changed the .pages document format into something even more malevolently proprietary. Apple word processing products since this timeframe, are subsets of the Pages ’09 features/functionality, and will filter out content they do not support.
A Pages ’09 document is usually a compressed (zip) folder archive that looks like a regular file to the Finder. The newer Pages family of products only write out a package that to the Finder, also appears to be a regular file, but in reality it is a folder. The newer Pages documents must be zipped before placed on non-Apple filesystems.

OAF iProc Receive Items Page VO restrict for one Organization

Similar Messages

Maybe you are looking for