OBEO Send/Receive errors

Hello all.
Last weekend we patched Beehive from 2.0.1.0 to 2.0.1.2. An unexpected consequence arose - every end user using Outlook is getting a pop-up fro OBEO at the bottom of their screen - "Send/Receive errors." It looks like the upgrade has either uncovered some unresolved errors, or is re-hashing errors that we took care of. Some of the updates are a couple months old.
My questions are -- Has anyone else seen this? Is there something I can do to make this go away? I've got a high-powered user with a folder-create error that cannot be resolved.
Thanks
ssb

ssb,
we had similar observations when moving from the 1.5.1.5.0 client to 2.0.1.2.0.
In former versions of OBEO, pending changes that could not successfully be uploaded to the server inconspicuously were displayed in the status bar.
Also look at [this thread|http://forums.oracle.com/forums/thread.jspa?messageID=4080889] .
Dev stated it enhanced the processes of reconciling these changes in the new version. In the same run, they obviouly increased the intrusiveness of notifying the user about such issues (in my eyes 5 minutes to 1 hour of notification delay to be chosen by the user is a little bit too intrusive, compared to the unimpressive status notification displayed earlier).
You have the option to retry the pending operation, open the troublesome item (which is a nice new option) and abandon the operation. We saw, that not all operations always offer all of these operations.
To have a clean slate, you might consider resetting the pending changes in the control panel mail profile administration dialogue.
Regards, Thomas
Edited by: snmdla on Jun 23, 2010 8:10 AM

Similar Messages

  • Microsoft Outlook 2007 send/receive error with windows 8.1

    I do have an IDEAPAD LENOVO with windows 8.1
    Today, i made some updates to my laptop/tablet, and i have problems with the send/receive error on my Microsoft Outlook 2007, before that it was working fine.
    Someone in the community know how I can fix it.
    Thank you,
    Moky

    Hi,
    What's the error message content you got? Please provide us more information about this problem so that we can resolve it more efficiently.
    Meanwhile, please refer to the following KB article and follow the steps to troubleshoot the issue:
    http://support.microsoft.com/kb/813514/en-us
    Hope it helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • AppleMobileDeviceSupport.MSI Generates Outlook Send/Receive Error

    I had to install AppleMobileDeviceSupport.msi seperately because on the initial install of itunes it errored. I updated to Vista SP1 and then installed just the MSI. Before I installed the MSI (and after the SP1 update) I was on Outlook and sent/received several times so it was working properly. But once the MSI was installed, Outlook started throwing 0x80042108 errors on send/receive.
    Any suggestions/advice? Uninstalling the msi doesn't help!
    Any assistance is appreciated!!

    I updated to Vista SP1 and then installed just the MSI.
    Doublechecking something related to the SP1 install part of proceedings.
    In your "Start" menu, right-click "Computer" and select "Manage". Click "Device manager".
    Is your Device manager currently completely blank?

  • Entourage gmail send/receive error

    Using gmail I cannot send/receive mail using entourage. I get server timeout error message -3529. I have not had any problem using entourage for four years - why now?

    Here are the old instructions to connect Entourage to Gmail, however the browser settings have been changed since this was written. See the link for Outlook that has more updated info:
    Connect Entourage 2004 to Gmail’s IMAP service
    Connect Outlook for Mac 2011 to Gmail’s IMAP service
    Set to sync every 10 min. Every two minutes will give you problems with Gmail's servers.
    BTW, what version of Entourage?
    Fair disclosure: OfficeforMacHelp is my site. I may receive some form of compensation, financial or otherwise, from my recommendation or link.)

  • Send receive error Outlook behind GFI Webmonitor

    I have new server and install GFI Webmonitor 2012 standalone after setup i can't send / receive email via outlook
    Before these i  have isa server and send/receive work , and gfi webmoitor not include any option add port or open port 
    for smtp , pop , imap ports
    Note : I don't have exchange server , but i have domain email our company from gmail

    Hi,
    First, we need to determine if this issue is caused by corrupt Outlook settings or the GFI Webmonitor settings.
    Before checking the Outlook side, please first login to your webmail and check if you can send/receive emails. If it works properly in Webmail, you can try to create a new mail profile in Control Panel and reconfigure your email account in the new profile
    to check the result.
    To check the GFI Webmonitor side, you'll need to contact the GFI Webmonitor support to get further assistance.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Getting Send/Receive Error (0x800CCC0F) in Outlook all of a sudden

    Hello all, did a search and didn't find the error below listed here, sooooooo: Yesterday afternoon I suddenly started to get this error when using Outlook to get my Verizon emails.  Oddly enough, this was just after the Stock Market came back online!  :-) This is the error I am getting: ... Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted.  If this problem continues, contact your server administrator or Internet service provider (ISP).' Problem comes and goes, and effects different addresses at different times.  I didn't change any settings and everything worked just fine in the morning.  Wondering if it is just something happening with the Verizon servers?

    I'm getting the same error ID and a similar message using Windows Live Mail: Unable to send or receive messages for the 04Verizon (xxxxx) account. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Server: 'pop.verizon.net'
    Windows Live Mail Error ID: 0x800CCC0F
    Protocol: POP3
    Port: 995
    Secure(SSL): Yes It's intermittent.  Sometimes the connection is normal.  Other times it isn't.   Same thing with different type devices and different ISP's. I hope Verizon is aware of this issue and working on fixing it.  

  • Outlook 2010 Send & Receive Error 0x8DE00002

    I need assistance in resolving the below error please:
    'reported error (0x8DE00002) : 'There is an error synchronizing your mail account. Please verify your account is configured
    correctly by first accessing your mail on the web. Error: 4102. Client. For nested folders, parent must be declared before child. '
    I have no idea what this means or where to go and fix the problem.  Too many hours lost already.
    thank you :)

    Hi,
    Firstly, I would like to ask what’s the account type do you use?
    Based on my experience, this error code mostly occur when you using Windows Live Account on Outlook. If this is the case, I suggest we firstly refer to the following article:
    http://answers.microsoft.com/en-us/office/forum/office_2007-outlook/error-code-4201-and-8de00002-not-receiving/a88761f0-9ca5-48a0-bf6f-a15ea73b55c2
    Thanks,
    Simon Wu
    TechNet Community Support

  • While send/receive email, I have received an error message "Sending of password d"? However with same login details, I am able to login with other application.

    While send/receive email, I have received an error message "Sending of password d"?
    However with same login details, I am able to login with other application.
    I have changed password still the issue remains as it is.

    https://support.mozilla.org/en-US/kb/cannot-send-messages

  • Imessages not sending/ receiving.  All texts made to other iphone users produce an error message where it shows as it was unable to deliver, however, the messages go through, but error still comes up after each imessage sent.  this does this for each text

    I have the Iphone 5S.  Over the last few days, I continually get mail delivery errors when imessages are sent to any contacts who have iphones.  I have spoken to my friends/ family who are also on the receiving/ sending end of my messages.  They also say that they are receiving an error/ mail delivery error when they send imessages to my phone.  Text messages are working fine (with other phones that are not iphones) and no delivery errors come up.  However, it is just with me sending or receiving imessages.  I have gone in to settings> messages> send & receive and all my information is right.  I have also attempted to cut the phone off and back on (hard reset as well) and this has not fixed the problem.  I then explored to see if my software was out of date, however, i have the most up to date software for the iphone 5 S.  Does anyone know of a way to fix this problem, as it is annoying to both me and anyone else who has an iphone that sends me a text/ imessage as it will *alert* that there was a delivery failure.
    Please help!!

    There could be a problem with iMessage, although usually when there is an outage these boards are flooded with problems.    It could be a very isolated issue, and if just started all of a sudden, it might be something at Apple.
    Although it is annoying, I would just wait it out a few days and see if it goes away on its own.

  • Send error. -9107 and receive error. -9109

    hello *,
    i am trying to get the sample apps. work.
    i have installed oDbSrv.9i, m-Srv + mdk and mobile Client(win32 native) on the same machine.
    i installed the samples by using the script.
    each time i am trying to sync with msync.exe i am recieving one of the following errors:
    send error. -9107 or receive error. -9109
    i am using the following sync-infos:
    user jane
    pwd jane
    srv. <http://myMachine>
    i installed another client (webtogo) on another machine.
    everthing works fine until i want to sync.
    the message reference says i have to look for bad communication to the mobilesrv..
    i can ping, i can run setup, i can login.
    even when i am starting to sync from the webtogoclient the clock which tells me the connecting to server state says done!
    but in the next step (sync app-data) the noted errors occures.
    can anybody give me a solution for this issue?
    thx

    We have seen this problem before and it is most likely because you installed MDK, Mobile Client and Mobile Server on the same machine. Install Mobile Server and MDK on one machine A and Mobile Client on another machine B.

  • IDoc receiver AEE: Error "Configuration for Sender/Receiver Partner Number/Port is incorrect"

    Hi all,
    We are on PI 7.4 AEX SP 7. We are trying to get the following scenario working: Inhouse warehouse management system (JMS) --> PI --> ECC (IDoc)
    Sender is configured as 3rd party technical system system with business system maintained in SLD
    business system has logical system assigned in SLD
    adapter specific identifiers show logical system in ID / NWDS
    logical system is defined in receiver (ECC system)
    partner profile is created in ecc for this very logical system (inbound parameters)
    No mapping of EDI_DC40 node in ESB (complete node disabled)
    no header mapping in ID / NWDS
    receiver IDoc AEE adapter is configured to not enforce control record (Control Record in IDoc XML = Not Mandatory)
    no Identifiers specified in receiver IDoc AEE adapter
    My guts feeling is that this should work, however, it doesnt't. Failing with "The Configuration for Sender/Receiver Partner Number/Port is incorrect. Enter proper values in Sender/Receiver Component"
    Any thoughts are highly welcome.
    Cheers
    Jens

    Hi,
    The error mentioned by you is not related to the port..but its related to the Application ...
    IDoc 51 means idoc has been received in R/3 client and when it tries to process it ended in error..
    Check with the functional consultant for the error you have received..
    HTH
    Rajesh

  • Why am I now receiving error messages when I am trying to send texts?

    Why am I now receiving error messages when I am trying to send texts?  People that I have texted before I am now getting error messages and I have to click on the excalmation point and hit send as a SMS text.  What's up?

    Hi dwalker130,
    If you are having issues with iMessages being sent to your friends, then take a look at the article below. It will walk you through checking your settings and even resetting your network settings on your iPhone. Let me know if this helps or need more assistance. It is a big article, so make sure to go over all the troubleshooting that is relevant to you.
    iOS: Troubleshooting Messages
    http://support.apple.com/en-us/TS2755
    Regards,
    -Norm G. 

  • Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

    Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

    Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you.  TanishaS1_VZW Follow us on Twitter @VZWSupport  If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Error message outlook 2013. Send receive not implemented

    Error message outlook 2013. Send receive. Not implemented

    Hi Tom,
    Does the issue reoccurs in OWA? If the issue only occurs in Outlook clients, it is recommended to post it in Outlook ITPro forum
    http://social.technet.microsoft.com/Forums/en-US/outlook/threads Your understanding would be appreciated.
    Just for your reference, the issue might be caused by various factors, for example: anti-virus application, third party addins, PST curroption, etc. You may run Outlook in Safe mode, or try the possible resolution below:
    http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/outlook-not-implemented-error-code/357fd2c4-d068-4487-99d0-6b0a4f664ce9
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • Getting errors when sending/receiving email

    Hi there I have only just updated to Windows 10 from 8.1 nd am able to receive mails On outlook 2013 but continually get the following error message 
    Task '[email protected] - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' I have tried everything but cant get it fixed can someone help Thanks Bryan

    Same thing here Fresh install of windows 10 and Outlook 2013 Receiving emails but getting the same error message when sending and emails stuck in Outbox. Tried all available options in account settings but it doesnt make any difference. Strangley enough though when initially setting up the mail account it sends its test email no problems. Installed Outlook 2010 to see if there was any difference but the same thing happens.

Maybe you are looking for