Outlook 2010 problem after installing KB2956128

We use a dutch 64bit version of Office 2010 and since we installed KB2956128 we get a popup. After clicking OK everything works fine. My users only get the popup
once per day, the first time they logon.
The popup says "De beheer van Microsoft Exchange heeft een wijziging aangebracht waardoor u het programma moet afsluiten en Outlook opnieuw moet starten"
In English it would be something like this. "The Exchange Admin made a change and now you must shut down and restart Outlook"
Removing KB2956128 does not solve our problem.
Is there a fix for this?

Hi,
We have received some reports that the KB2956128 caused some issues, but it's the first time I've seen this symptom.
As you mentioned removing this kb didn't solve the problem, I still doubt whether the issue is related to this kb.
Have you made any change on Exchange recently? You can expect to see the prompt under the following condition:
If the RPCClientAccessServer property changes.
-Cross AD site mailbox moves may trigger this, as each AD site may have a different RPC Client Access Array.
-If you are not using a CAS Array, if the RPC endpoint changes after a mailbox move. An example of this is when a user on the source database has a
specific CAS as its RPC endpoint, and the destination of the mailbox move has a different CAS specified as its RPC endpoint.
As for the message "Your Administrator has made a change and requires you to restart Outlook", you can find more information and conditions in this blog below, check if it is helpful to you:
http://blogs.technet.com/b/vytas/archive/2014/11/12/your-administrator-has-made-a-change-and-requires-you-to-restart-outlook.aspx
You have the option to completely suppress the dialog:
Uncheck the option “Show Microsoft Exchange Messages” from the Outlook icon on taskbar, and test the behavior.
I hope this is helpful.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

OL2010:Search Problems after install KB2956128

Hi,
We have Outlook 2010 with Exchange 2010. After installing the latest Patches for Outlook (KB2956128) we had problems with the search. We couldn't search (Advances search) in shared calendar.
Error: Outlook cannot perform your search. Outlook cannot display this view.
After unistalling this patch the search works fine. Has someone the same problem with this patch?
Thanks
florian

So glad I found this. A couple PC's in our environment that are setup to test the latest updates had OCS crash every 2 or 3 min after installing updates from the February patch release. Both PCs are running Office 2010 x32 with OCS 2007 R2.
Here is the crash message:
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:
communicator.exe
Application Version:
3.5.6907.268
Application Timestamp:                     5165ca9aFault
Module Name:                          MSVCR90.dll
Fault Module Version:                        9.0.30729.6161
Fault Module Timestamp:                  4dace5b9
Exception Code:
c0000005Exception
Offset:                                0003b4a8OS
Version:                                          6.1.7601.2.1.0.256.48Locale
ID:
1033
Additional information about the problem:LCID:
1033
Was able to at least control the crashes using this tip I found here:
OCS client crash fix
"Method one: Configure PIM to sync with None or Windows Address Book
Office Communicator does not crash if you set the PIM to sync with None or Windows Address Book. However, Communicator operates with limited Outlook Integration.
1. Start Office Communicator.
2. On the green button menu, click Options, and then click Personal.
3. In the Personal information manager list, click either None or Windows Address Book."
Unfortunately, my search function was still broken. Began to dig around on this and while I found no Office Communicator patches released and installed from the February patch Tuesday, I found it odd that KB2956128 was actually listed as
being installed twice on both affected machines.
After I removed both instances of KB2956128 and set the OCS Personal Information Manager back to "Microsoft Office Outlook (Contacts, ...." it has been running without any crash for 30 min now.
HOWEVER, I still don't have the search function in OCS after having removed KB2956128, but glad it is not crashing every 2 min.

Exchange 2007 - Outlook Anywhere problems after installing new SSL cert

*** Original thread posted on wrong forum ***
Hi all,
Exchange 2007 environment (2x CAS, ISA2006). Not much familiar with Exchange.
Problem: 20-odd machines off the domain use Outlook Anywhere (XP with Outlook 2010). AUthentication pop-up and not able to connect.
Company has recently changed its name and we have to renewed the SSL cert. Previous SSL cert. was issued to: webmail.oldcompname.co.uk (several SANs on that cert., including internal server names).
Applied for a new UCC SSL cert issued to: newcompanyname.com (also includes webmail.newcompanyname.com ; autodiscover.newcompanyname.com + old SANs).
The setting on those machines point the proxy to the following:
Https://webmail.oldcompname.co.uk (which is fine since it is in the cert and can be accessed)
Only connect to proxy servers that have this principal name in their cert.:
msstd:webmail.oldcompname.co.uk (I believe this is the problem since the new UCC SSL cert. was issued to newcompanyname.com).
Browsing technet + internet it seems that I need to look into OutlookProvider EXPR.
When I run Get-OutlookProvider everything is blank (I believe I should be concerned to EXPR only for Outlook Anywhere).
I am thinking of running: Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:newcomanyname.com
My only concern is whether this might break something else in the Exchange environment, especially as we have 100+ users on smartphones connecting via SSL on webmail.oldcompname.co.uk
Is it save to run this command? Do I need to re-start IIS? Do I need to look into any settings on ISA2006?
Comments/help are much appreciated.
Regards

Hi,
According to the description, I found that we re-new a SSL certificate.
"I am thinking of running: Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:newcomanyname.com"
Just do it. Then remove the old certificate on ISA server and install a new one.
Found a similar thread for your reference:
Renewal of SSL certificate in exchange 2007 with ISA 2006
http://social.technet.microsoft.com/Forums/exchange/en-US/25770038-8491-470a-92fa-8ae50674b7a6/renewal-of-ssl-certificate-in-exchange-2007-with-isa-2006
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Outlook 2010 hangs after applying KB2956203 update

Hi All,
We have Outlook 2010 with Exchange 2010. After installing the latest Patches for Outlook (KB2956203) we had problems sending outlook forms. The Outlook not responds then it will close.
After uninstalling this patch the Outlook works fine. Had anyone encountered the same problem?
Thanks
Jim

Hi,
Thank you for your reporting. We have noticed this, and would like to collect more information for further investigation.
Can you guys share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them to this email account:
[email protected] (please use the link of this thread as the subject).
We appreciate your assistance with this.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Problem after installing 10.4.8

Hello,
I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
Thanks...

How did you update? Mac OS X 10.4.8 Update (delta)?
http://docs.info.apple.com/article.html?artnum=304200
After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
2.0 MacBook • 100GB HD • 2GB RAM Mac OS X (10.4.7) 60G Photo iPod • AppleCare

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

DVD drive problem after installing 10.5.6

I have MacBook Pro 15",
Model Identifier-MacBookPro 2,2,
Intel Core 2 Duo 2.16 Ghz
Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
Before I install this update, everyting was ok!
Please Help!!
P.S Sorry, for my english

Hi Drug;
Have you tried resetting PRAM by holding down control, option, P and R during reboot?
Allan

Hi I have a problem after install my CS6. It keeps saying MSVCR100.dll was not found

Hi I have a problem after install my CS6. It keeps saying MSVCR100.dll was not found?

32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

Problem after installing IOS 8.0.2

Hi there,
I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
Thanks for the sopport

Hi there,
I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
Thanks for the sopport

Problem with Exchange 2010 scripts after installing PowerShell 4.0

Hi
After installing new updates for MS Exchange 2010 and PowerShell 4.0 I've got problems with PS scripts using buil-in
exchange commands.
I wrote interactive script for searching e-mails. Here is a pice of code where I get error after installing PS v4.
$SearchContent=Read-Host "Write sentence to find"
Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Discovery Search Mailbox" -TargetFolder "Inner box" -LogOnly -Loglevel Full | Out-Null
After installing PowerShell 4.0 I get that bug and report in TargetMailbox is not genereated.
The property keyword isn't supported.
At C:\Administration\Scripts\T-SearchMail.ps1:122 char:1
+ Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Disco ...
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo          : InvalidArgument: (:) [], ParserException
    + FullyQualifiedErrorId : 35E6C841
Using PowerShell 2.0 everything was ok.
How to solve this problem?
Tomasz
Kind Regards Tomasz

But http://blogs.msdn.com/b/powershell/archive/2013/10/25/windows-management-framework-4-0-is-now-available.aspx is dated
October 2013, while the current Windows Management Framework 4.0 System Requirements section states:
Servers that are running the following applications can now run WMF 4.0. The versions listed are the minimum releases required to run WMF 4.0.
Microsoft Exchange Server 2013 Service Pack 1
Microsoft Exchange Server 2010 SP3 with Update Rollup 5
Since
Update Rollup 5 For Exchange 2010 SP3 (KB2917508) was published Febrary 2014, shouldn't Exchange 2010 now be compatible with PowerShell 4.0?

Outlook 2010 (Exchange) after iCloud installation hangs

Hi there,
i have Outlook and use it with a Exchange Connection. I installed the iCloud Software for Windows to Sync with Outlook. But after a while Outlook hang at the start. I tried many things Office repair, icloud Software repair and reinstallation nothing changed. But if i deinstall the iCloud Softwar everthing works well.
Wehen i start Outlook with installed iCloud Software in Safemode it runs, but i get no reminder from iCloud Tasks/Events. And i get a messe to put a SmartCard in!??? After i click on Aboard i can Work with Outlook.
Can somebody help me!?
Matthias Berndt

Sorry to drag up an old thread, but I have exactly the same problem. And after countless searching on these forums and the internet this is the closest I have seen to my problem.
My devices:
Home: PC, Windows 7 64-bit. Outlook 2010 with SP1, all updated with MS service packs and hotfixes.
I converted [some time ago] all my home/personal contacts to iCloud. I'm fine with that.
iPhone4: syncs contacts with iCloud
iPad2: syncs contacts with iCloud
iTunes shows that contacts are being syncd with iCloud and NOT itunes.
Everything is syncing just fine.
BUT....
I would like to see my iCloud contacts, using Outlook 2010 (connecting to Corporate Exchange Server) using my work laptop.
Just to be clear, I don't want to sync my contacts between Exchange and iCloud, I'm quite happy to keep work contacts in Exchange and personal contacts in iCloud. All I want to do is see iCloud - Contacts in Outlook on my work laptop.
Firstly, I made a backup of the contacts in corporate Outlook, then manually deleted them from within Outlook. I did this to avoid the iCloud applet from attempting to copy/merg contacts from Outlook/Exchange into iCloud - potentially causing duplicates.
I then installed the iCloud Control Panel applet successfully, signed in with my Apple ID. All looks good so far.
I then fired up Outlook 2010 on the laptop....which just sits there displaying the splash screen and doesn't load up the main application window.
Cancelled the process.
Uninstalled iCloud applet.
Started Outlook again on the laptop, application works fine.
I have read the Apple article on Exchange and iCloud...and I don't believe I am doing anything different to what the expected functionality should be. i.e. it should be possible to run Outlook connecting to Exchange, and have iCloud connectivity too, yet of course both sync to their respective servers.
Any advice or help?

BizTalk Administration Console problem after installing IBM iSeries Access

Hi,
We have a Biztalk Server 2010 environment on Windows Server 2008 R2 with SQL server on separate machine.
After installing IBM iSeries Access we get errors in Biztalk Administration Console, especially the Host Instance and Adapter information cannot be loaded.
Except for the errors in Adminsitration Console, the Biztalk installation seems to be working fine, so the integration processes doesn't seem to be affected.
We get the following error:
BizTalk Server cannot access SQL server. This could be due to one of the following reasons:
1. Access permissions have been denied to the current user. Either log on as a user that has been granted permissions to SQL and try again, or grant the current user permission to access SQL Server.
2. The SQL Server does not exist or an invalid database name has been specified. Check the name entered for the SQL Server and database to make sure they are correct as provided during SQL Server installation.
3. The SQL Server exists, but is not currently running. Use the Windows Service Control Manager or SQL Enterprise Manager to start SQL Server, and try again.
4. A SQL database file with the same name as the specified database already exists in the Microsoft SQL Server data folder.
Internal error from OLEDB provider: "The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception." (WinMgmt)
I tried to uninstall the IBM iSeries Access, but the problem remains.
This issue is related to this post
http://social.technet.microsoft.com/Forums/en-US/6f371f45-813c-48d8-80e3-bd94e00bf5dd
But this post seem to miss a solution.
Thanks fo your help with this!
BR
Samuel
SamueL J

Hi and thanks for your help!
The machine.config did it :)
According to this link there is a known issue with the IBM iSeries Access installation which removes the proper permissions from the machine.config and therefore Biztalk Administration Console stops working correctly.
http://www-01.ibm.com/support/docview.wss?uid=nas284158c400658982b86257611003c6d21
BR
Samuel
SamueL J

Outlook 2010 problem after installing KB2956128

Similar Messages

Maybe you are looking for