OBIEE11g on Mutiple SANs
I have been preparing an OBIEE installation following the:
‘Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle Business Intelligence 11g Release 1 (11.1.1) E15722-05’ and ‘Oracle® Fusion Middleware, Using Web Server 1.1 Plug-Ins with Oracle WebLogic Server 11g Release 1 (10.3.6) E16435-05’.
Using:
IIS 7.0, configured for proxying the requests to WebLogic Server 10.3.6.
JDK 7,(2000.1.7_05) used for WLS.
I am configuring two SAN storage areas, each will be performing as separate Data Centres, one will be set as Primary and the other as Standby.
In the event that the Primary SAN fails, I need a solution to provide automatic failover from the Primary to the Standby.
All the WebLogic domains and related configurations will be sitting in the storage areas. These need to be kept in sync – How do I do this ? This is a recommended way for Weblogic HA, however I am finding it difficult to find any examples. Your help is highly appreciated
Cheers,
Hello,
Please refer to this document for FWM Maximum availability : http://www.oracle.com/technetwork/database/availability/maa-fmwsharedstoragebestpractices-402094.pdf
Also for horizontal scale out for failover : http://www.rittmanmead.com/files/collab11_borkur_clustering.pdf
Hope this helps. Pls mark if it does.
Thanks,
SVS
Similar Messages
-
Mutiple instance for messaging server
Can I set up mutiple instance of messaging server in one physical server ? The purpose is to separate domain to use difference resource, configuration. Now we use JES verion 6.
Can I set up mutiple instance of messaging server in
one physical server ? The purpose is to separate
domain to use difference resource, configuration. Now
we use JES verion 6.While I don't know if it supported(I think it wasn't but we needed to make it work while JES is still in transition about HA strategy), I did an installation of 3 JES2004Q2 messaging instances on 3 different hosts that were all in the same Veritas Cluster. With this configuration, we were able to have any messaging instance run on any host in the cluster (and could shift them so all 3 instances were running on a single host without problem, which we did several times)
Each host had a SAN partition mounted as
/usr/iplanet-$host
such as
/usr/iplanet-host1
/usr/iplanet-host2
these partitions were able to be moved between hosts as needed by the cluster software.
On each host, I made sure it had the SAN mount in place, then installed messaging as:
/usr/iplanet-$host/msg61
(instead of /opt/SUNWmsgsrv)
and when I ran /usr/iplanet-$host/msg61/sbin/configure
I said that the data directory should be:
/usr/iplanet-$host/msg61/msg-$host
I installed the admin server as:
/usr/iplanet-$host/admin5
On each of the messaging instances, I ran the ha_ipconfig script to lock down the IP address that the server processes bound to (and also had to lock down the ens daemon using a separate configutil variable, it still listened on the wildcard address).
When I was configuring the admin servers, I made each instance's run on a seperate port number so I didn't need to worry about locking down the IP. We also had to make a slightly customized version of the VCS agent that Sun supplies to work with the model we decided on.
There are still some issues, such as with performing patches. To patch an instance, you would need to make sure it is running on the host that it was originally installed on. If you only have a single host, I don't think the technique I used would work for you (unless you are able to use Solaris 10 beta and the zones functionality, and I am not sure if the JES packages play well with it yet) -
We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support -
Why can't I download a book from the San Mateo Co. Library ?
Bugzilla is not the place for this sort of problem. Forwarded this post to the relevant team.
-
SOAP Adapter Java Null Pointer, Receiver receive mutiple times of message
Hi,
My scenario is Proxy -> PI 7.1 -> Soap receiver.
The scenario was working before , and recently we got System Fails in adapter:
********************Adapter Audit Log****************************
2010-01-11 10:41:16 Information The message was successfully received by the messaging system. Protocol: XI URL: http://hdrpidev01.bchydro.bc.ca:51100/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2010-01-11 10:41:16 Information Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-01-11 10:41:16 Information Message successfully put into the queue.
2010-01-11 10:41:16 Information The message was successfully retrieved from the receive queue.
2010-01-11 10:41:16 Information The message status was set to DLNG.
2010-01-11 10:41:16 Information Delivering to channel: ESB_CostCenter_SOAP_Receiver
2010-01-11 10:41:16 Information SOAP: request message entering the adapter with user J2EE_GUEST
2010-01-11 10:41:16 Information SOAP: completed the processing
2010-01-11 10:41:16 Information SOAP: sending a delivery ack ...
2010-01-11 10:41:16 Information SOAP: sent a delivery ack
2010-01-11 10:41:16 Error Adapter Framework caught exception: null
2010-01-11 10:41:16 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException.
2010-01-11 10:41:16 Information The message status was set to WAIT.
2010-01-11 10:41:16 Information The asynchronous message was successfully scheduled to be delivered at Mon Jan 11 10:46:16 PST 2010. .....
The log has another three reties which I did not listed above.
The question is that the receiver system received the message and received 4 times.
I future go to the je22 engine log viewer, then I got following error message :
********************J2EE Log Viewer****************************
Message:
Marked transaction for rollback for meesage 4b47ad05-9df9-0176-e100-8000ac190651(INBOUND). Reason: java.lang.NullPointerException
Date: 2010-01-11
Time: 10:41:09:732
Category: com.sap.engine.messaging.impl.core.queue.consumer.ReceiveConsumer
Location:
com.sap.engine.messaging.impl.core.queue.consumer.ReceiveConsumer.invokeHandler(QueueMessage, MessageController)
Application:Thread: MS Queue Worker [SOAP_http://sap.com/xi/XI/SystemRecv]
Data Source:
j2ee/cluster/server0/log/defaultTrace_00.trc
Arguments:
DSR Transaction: 0f3437c0fcc911de826200145ec71b45
Message Code:
Session: 0
Transaction: SAP J2EE Engine JTA Transaction : [6ffffffab3c2602ffffffa564]
User: J2EE_GUEST
Time Zone: 0-800
CSN Component: BC-XI-CON-MSG
DC Component: com.sap.aii.af.ms.svc
Correlation ID: 111885350000000004
DSR Root Context ID: 0F3437C0FCC911DE826200145EC71B45
DSR Connection: 0f3437c0fcc911de826200145ec71b45
DSR Counter: 0
Log ID: 00145EC71B45510B0000000100137042
Host: hdrpidev01
System: DI1
Instance: DVEBMGS11
Node: server0
********************End of J2EE Log Viewer****************************
We never came cross the situation of sending mutiple message out while there is system error in adapter.
Any ideas and comments ?
Thanks in advance
LiangSolved by creating new adapter.
-
How do I add mutiple horizontal submenus to one menu label.
For Muse, how do I add mutiple horizontal submenus to one menu label. In other words, I have Interior,Graphic and Web as one menu. Under Interior I want a horizontal submenu with Kitchens, bathrooms, closets,etc. Then under Kitchens I may want Bars, Islands and pantries.. Windows 7.
In plan view drag all of the pages you want in a submenu under the page you have set for the top level menu. So in your situation you would want kitchens, bathrooms, clostets etc under the interior page in plan view.
-
How do I use a variation of the font family OPEN SANS in Adobe Edge Web Font?
How do I use a variation of the font family OPEN SANS in Adobe Edge Web Font?
ex:
<scriptsrc="//use.edgefonts.net/open-sans-condensed:n3,i3,n7:all;open-sans:n3,i3,n4,i4,n6, i6,n7,i7,n8,i8:all.js">
How do I use the i3 variation in css?
My css looks like this: font: 16px 'open-sans-condensed';Thank you.
But I want to use the [i3] variation font.
<scriptsrc="//use.edgefonts.net/open-sans-condensed:n3,i3,n7:all;open-sans:n3,i3,n4,i4,n6, i6,n7,i7,n8,i8:all.js">
Would look like?
CSS Selector {
font-family: open-sans-condensed:i3, sans-serif;
font-size: 16px; -
LabVIEW Developer Opportunity in San Jose
CTG has been asked to assist our client in staffing a LabVIEW Developer opportunity. This is a 200 hour, short term project on-site in San Jose, CA. This quick job will entail very little new development and will consist primarily of enhancements and modifications to existing code. If you are interested, please forward a copy of your resume (.doc or .txt) to the e-mail address listed below. I will contact you directly upon receipt of that information.
Please note that we can only consider W-2 applicants at this time; no third party, independent or corp-to-corp vendors, please.
Thanks for your consideration!
Regards,
Jessica Owens, Sr. Recruiter
ctg Computer Task Group, Inc
phone: 800-992-5350
[email protected]
www.ctg.com
Backed by 39 years' experience, CTG provides IT staffing, application management, and consulting solutions to help Global 2000 clients focus on their core businesses and use IT as a competitive advantage to excel in their markets. CTG combines in-depth understanding of our clients' businesses with a full range of integrated services, proprietary service methodologies, and a proven track record of delivering solutions that work. More information about CTG is available on the Web at http://www.ctg.com.Thank you for your interest in CTG; this position is now closed. If you would like to forward a copy of your resume, it will be entered into our database and you will be contacted as appropriate opportunities become available. In the meantime, thanks again and have a great day!
Regards,
Jessica Owens, Sr. Recruiter
ctg Computer Task Group, Inc
phone: 800-992-5350
[email protected]
www.ctg.com
Backed by 39 years' experience, CTG provides IT staffing, application management, and consulting solutions to help Global 2000 clients focus on their core businesses and use IT as a competitive advantage to excel in their markets. CTG combines in-depth understanding of our clients' businesses with a full range of integrated services, proprietary service methodologies, and a proven track record of delivering solutions that work. More information about CTG is available on the Web at http://www.ctg.com. -
FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0. -
I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me
I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow. -
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
-
How to connect a SunFire 280R to an HP EVA8000 San.
Hello experts,
I'm trying to connect a Sunfire 280R to an eva8000, I've installed the fibra cards and I've done a probe-scsi-all and I can see all the cards
a san :-
ok probe-scsi-all
/pci@8,600000/SUNW,qlc@4
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 21000004cf780993 SEAGATE ST336605FSUN36G 0438
1 1 0 21000011c62d4362 SEAGATE ST336607FSUN36G 0307
/pci@8,700000/SUNW,qlc@3
************************* Fabric Attached Devices ************************
Adapter portId - 330500
Device PortId 330100 DeviceId 0 WWPN 50001fe150061f0d
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330101 DeviceId 1 WWPN 50001fe150061f0f
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330102 DeviceId 2 WWPN 50001fe150061f09
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330103 DeviceId 3 WWPN 50001fe150061f0b
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
/pci@8,700000/scsi@6,1
/pci@8,700000/scsi@6
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009
I then downloaded the Sun StorEdge SAN Foundation Software I tried to install it but it just stops with status code 8. See output :-
./install_it
Logfile /var/tmp/install_it_Sun_StorEdge_SAN.log : restarted on Monday February 19 14:33:39 GMT 2007
This routine installs the packages and patches that
make up Sun StorEdge SAN.
Would you like to continue with the installation?
[y,n,?] y
Verifying system...
Checking for incompatiable SAN patches
xargs: Child killed with signal 13
Begin installation of SAN software
Installing StorEdge SAN packages -
Package SUNWsan : Installed Previously.
Package SUNWcfpl : Installed Previously.
Package SUNWcfplx : Installed Previously.
Package SUNWcfclr : Installed Previously.
Package SUNWcfcl : Installed Previously.
Package SUNWcfclx : Installed Previously.
Package SUNWfchbr : Installed Previously.
Package SUNWfchba : Installed Previously.
Package SUNWfchbx : Installed Previously.
Package SUNWfcsm : Installed Previously.
Package SUNWfcsmx : Installed Previously.
Package SUNWmdiu : Installed Previously.
Package SUNWjfca : Installed Previously.
Package SUNWjfcax : Installed Previously.
Package SUNWjfcau : Installed Previously.
Package SUNWjfcaux : Installed Previously.
Package SUNWemlxs : Installed Previously.
Package SUNWemlxsx : Installed Previously.
Package SUNWemlxu : Installed Previously.
Package SUNWemlxux : Installed Previously.
StorEdge SAN packages installation completed.
Begin patch installation
Patch 111847-08 : install_it: Patchadd failed with a status of 8
Could any one point me in the right direction I am new to san configuring I done it once before but it was just a case of going through a series of notes, Thanks for all your help (I will answer all question tommorrow as i' m off for the reset of the day)
ThanksTaken from sunsolve, maybe useful for you.
Installing StorEdge SAN patches -
patch 114475-01 : Installed Successfully
patch 113767-02 : Installed Successfully
patch 113766-02 : Installed Successfully
patch 111847-07 : Installed Successfully
patch 114877-01 : install_it: Patchadd failed with a status of 8
This software failed to completly install.
It may not be safe for the system to remain in this undetermined state.
Would you like to rollback your changes ? [y,n,?]
Resolution: Top
Normally, this is the recommended action. But if the patch
that fails to install is 114877-xx or 114878-xx, then a
rollback may not be necessary.
Both 114877-xx (Solaris 8) and 114878-xx (Solaris 9) patches the following
packages: SUNWjfca, SUNWjfcax, SUNWjfcau, and SUNWjfcaux.
The packages and patches are drivers for the JNI 2GB PCI Single FC Network
Adapter and JNI 2GB PCI Dual FC Network Adapter fibre-channel that have
Sun StorEdge SAN 4.x Foundation Suite compatible FCODE.
If server does not have this type of host bus adapter, then SUNWjfca,
SUNWjfcax, SUNWjfcau, and SUNWjfcaux packages are not installed on
the system. The patch will fail to install causing install_it script
to prompt for a rollback.
For this specific situation, it is okay to respond no to the rollback
and let install_it script proceed to completion as the patch is not
required.
Would you like to rollback your changes ? [y,n,?] n
regards -
Custom warehouse using OBIEE11g
Hi Guru,
I want to know whether we can implement project using custom warehouse with out obi apps? we wanted to implement small project with obiee11g, informatica 9, DAC and oracle11g. Can any one suggest me whether we can implement custom warehouse with OBIEE11g?
Thanks in advance for your help
Regards,
par.Go ahead. You can very well implement this. OBIEE11g supports both.
-
Ensure field sequence is correct for data for mutiple source structure
Hi,
I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
I'm getting error that packed fields are not permitted.
I'm getting Ensure field sequence is correct for data for mutiple source structures.
Source Structures
HEADER_STRUCT G/L Account Document Header
LINE_STRUCT G/L Account Document Line
Source Fields
HEADER_STRUCT G/L Account Document Header
BKTXT C(025) Document Header Text
BLART C(002) Document Type
BLDAT DYMD(008) Document Date
BUDAT DYMD(008) Posting Date
KURSF C(009) Exchange rate
WAERS C(005) Currency
WWERT DYMD(008) Translation Date
XBLNR C(016) Reference
LINE_STRUCT G/L Account Document Line
AUFNR C(012) Order
HKONT C(010) G/L Account
KOSTL C(010) Cost Center
MEINS C(003) Base Unit of Measure
MENGE C(013) Quantity
PRCTR C(010) Profit Center
SGTXT C(050) Text
SHKZG C(001) Debit/Credit Ind.
WRBTR AMT3(013) Amount
I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
Structure Relations
E1FIKPF FI Document Header (BKPF) <<<< HEADER_STRUCT G/L Account Document Header
Select Target Structure E1FIKPF .
E1FISEG FI Document Item (BSEG) <<<< LINE_STRUCT G/L Account Document Line
E1FISE2 FI Document Item, Second Part of E1FISEG (BSEG)
E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
E1FISEC CPD Customer/Vendor (BSEC)
E1FISET FI Tax Data (BSET)
E1FIXWT Extended Withholding Tax (WITH_ITEM)
Files
Legacy Data On the PC (Frontend)
File to read GL Account info c:\GL_Account.txt
Data for Multiple Source Structures (Sequential Files)
Separator Tabulator
Field Names at Start of File
Field Order Matches Source Structure Definition
With Record End Indicator (Text File)
Code Page ASCII
Legacy Data On the R/3 server (application server)
Imported Data File for Imported Data (Application Server)
Imported Data c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
Converted Data File for Converted Data (Application Server)
Converted Data c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
Wildcard Value Value for Wildcard '*' in File Name
Source Structures and Files
HEADER_STRUCT G/L Account Document Header
File to read GL Account info c:\GL_Account.txt
LINE_STRUCT G/L Account Document Line
File to read GL Account info c:\GL_Account.txt
File content:
Document Header Text Document Type Document Date Posting Date Exchange rate Currency Translation Date Reference
G/L Account document SA 20080401 20080409 1.05 CAD 20080409 Reference
Order G/L Account Cost Center Base Unit of Measure Quantity Profit Center Text Debit/Credit Ind. Amount
44000022 1040 Line item text 1 H 250
60105M01 13431 TO 10 Line item text 2 S 150
800000 60105M01 Line item text 3 S 100
60110P01 6617 H 40 Line item text 4 S 600
44000022 ACIBRAM Line item text 5 H 600
The file structure is as follow
Header titles
Header info
Line titles
Line1 info
Line2 info
Line3 info
Line4 info
Line5 info
Could someone direct me in the wright direction?
Thank you in advance!
CurtisHi,
Thank you so much for yout reply.
For example
i have VBAK(Heder structure)
VBAP( Item Structure)
My file should be like this i think
Identification content Fieldnames
H VBELN ERDAT ERNAM
Fieldvalues for header
H 1000 20080703 swapna
Identification content Fieldnames
I VBELP AUART
Fieldvalues for item
I 001 OR
002 OR
Is this format is correct.
Let me know whether i am correct or not -
Post Author: usaitconsultant
CA Forum: JAVA
Would you know if there's a way to mimic Deski
document from BOXI server(CMS) to local machine, pass parameter, execute and
save in a mutiple report format then store in a local drive or network
drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only and not desktop intelligence. Please let me know your ideas. I would really appreciate your help. Thanks.Post Author: usaitconsultant
CA Forum: JAVA
Hi Ted,
Thanks for the reply.The file is not available in the server. Though, I checked CMS and I found an instance in history tab and the status is failed with error below.
Error Message:
A variable prevented the data provider Query 1 with BANRRD30 from being refreshed. (DMA0008).When I checked my codes, I found out that the object Im using is for web intelligence data provider. However, I cannot find any documentation and example for passing parameter values in desktop intelligence data provider. Any idea on this? You think this is not suported by Report Engine SDK?Thanks.
Maybe you are looking for
-
How to get User Id in Web dynpro application
Hi Experts, I am running web dynpro application with authentication checkbox set. I want to display user id of the user in my application. I am using following code in Init method of component controller. IWDClientUser wdUser = WDClientUser.getCurren
-
1.5 How to globally set the System Cache location
FROM ANOTHER USER ON ANOTHER BOARD: This one did not get answered completely. ************************* Question: Hello, I want to deploy JWS on a client PC with Microsoft XP OS. This client have multiple users. JWS put a file deployment.properties i
-
MSS SAP R/3 Connection Problems
Hi, I've just installed EP6 SP2 and imported the MSS 6.1.2 business package. However all the My Staff delivered iviews give a similar error when trying to connect to R/3. The My Staff iviews use a logical system name SAP_R3_HumanResources. I've confi
-
Hello Guys, I hope someone can help me with this error. I have been searching from forums but typically, causes and resolutions are generalized. This is the first time it happened on our Win 2008 Server and we have not installed any (hardware/Softw
-
If I have installed something such as Leopard can I uninstall it, how?!!?!?!?!?!?!?!? Please tell me how.