Object in selection criteria

hi all
i have a query which has expiry ..i want to keep the expiry date in my selection criteria before execution.that is it shuld ask the expiry date before running the query...
thanks
shalini

Uhm.. stupid question but have you been on certification?
This would be a standard variable restriction on the Expiry date field with ready for input set.
The best source of information for this is help.sap.com
Regards

Similar Messages

  • CN43N: No objects were selected using the criteria

    Hi;
    recently i have loaded WBS into system through a BDC programme.
    When i check those WBS in Project Builder i can see them, on other hand when i execute CN43N it does not show me any record.
    Your valuable input is required.
    Thank you.

    Hi Guru,
    Could you please check the reasons why the system does not display anything in CN43N based on your criteria?
    1) The system could not find any objects which meet the specified selection criteria.
    2) The controlling area set is not the same as the controlling area in your project.
    Change the controlling area in the information system, as necessary, by choosing:
       o Extras -> Set controlling area
       o Environment -> Set controlling area in the Project System area
         menus - for example, when accessing the hierarchy reports in the
         project information system.
       Set controlling area
       o In the selection screen when accessing the cost element reports
    Could you also review note 107605 which it may help to solve your issue?
    Thanks a lot and kind regards,
    Enrique Sosa

  • Need to take part of selection criteria out of a custom report (R painter)

    Hi Experts..
    I have a requirement to hide cost elements/group which appear as part of selection criteria on our custom report (report painter) for projects.
    1. Why this appears as part of the selection criteria as i did not find this defined in Edit --> General data selection. (I only found  CO area, Valuation, Fiscal year, Period, and Object in there).
    2. We have found a system performance issue when a user put in cost elements for selection. So I am required to take this out. I thought i can just take this out from General data selection.. If I can't find it in there, where would i be able to do that??
    3. Suppose I would hide this selection by creating a screen variant.. I was looking in SHD0
    but its not working with our Z T.Code...it display the error message "Variants are possible only for dialog transactions"... This does not seem to work with a custom t-code. Then how would I do this ????
    Please help clarify on this ....
    Thanks....
    Monica
    Edited by: Monica Kong on Aug 24, 2008 6:01 AM

    Hi Monica,
    I believe we have an executable report here...
    go to se38 -> enter program name -> click on "attributes" button -> display
    We can see the type as 'Executable' or 'Modulepool'
    generally a selection screen is brought by using keywords 'Parameters' or 'select-options' in Executable programs and with screen in modulepool ..although we can use a combination of both in some cases
    So in your program..
    check for keywords
    'Parameters'/'Select-options'
    The best way to proceed is to press F1 on the field that needs to be removed from selection...note the details
    "screen number" and "screen field"
    (1)By default screen number = 1000  if it is an executable program
    Now see the scrren field ..if it is select-options it will something like field-low or field-high
    so in the report
    search for field for cost center and group with keyword starting as parameters or select-options and comment the same
    Remember to comment tte fields throughout the program since this field will be used in multiple locations
    (2) if it is modulepool program note the screen number , go the program and screen and remove the field from screen painter and comment the fields where ever used in the program
    Also note that using screen variant is a good option but done if user needs specific settings on a report or we need the original report as it is plus additional report with few variations
    Hope it helps
    Pls check and revert
    Regards
    Byju

  • Work Order Reporting using I_BEGRP as a selection criteria

    Hello all,
    I am having a small problem regarding the authorization object I_BEGRP, which appears at general data informed tab at equipment level. The situation is as described below:
    Our client has several subcontractors working with Maintenance Work Orders in the system, and in order to control that each subcontractor does only access to their own data (equipment, work orders, etc.) different authorization group has been used to assign each of the equipment.
    Problem is now when the client needs to be able to know the list of MWO per subcontractor.
    The need is clear: for a user that is not restricted by this authorization group, it cannot be usedas a selection criteria to obtain a list of WO of a certain subcontractor.
    I have seen that it can be shown in the equipment standard report IH08, but only as exit data, but not as entry selection criteria, but neither for MWO (IW39) nor for notifications (IW29) it can be used as an entry selection criteria.
    Can someone help me with this issue? is the only solution to make a custom development, and to copy program RIAUFK20 in order to allow this field as an input?
    Thank you very much for your help.
    BR,
    Francesc.

    Hi,
    the only workaround I can think of is to use suitable search help for equipment. So the process would be to run IW29, open search help for equipment that allows you to specify authorization group (I think Equipment by Equipment list should work), then select all equipments from the auth. group and then run IW29 restricted by equipments. It's not nice but it allows you to select all orders that have equipments assigned to some specific authorization group. Otherwise you need to enhance standard reports to allow authorization group as one of the select options.
    Cheers

  • BPL - Define Selection Criteria (Selection Exit)

    We are using TDMS 3.0 with following patch level:
    DMIS             2006_1_700     0010
    DMIS_CNT     2006_1_700     0010
    DMIS_EXT     2007_1_700     0000
    We have a scenario where we want to transfer all sales transactions of particular plant in target system. We have selected package BPL scenario in TDMS with business context sales document.
    Under 'Define selection criteria' activity, we are getting only sales Document number as a filter criteria. We can extend the filter criteria to any column of table VBAK, but not any of the dependent tables (Like VBAP - containing plant)
    The operation guide shows an example of selection criteria for materials, filtering by the start table (MARA-MATNR) and at the same time by a dependent table (MARC-WERKS).  I want to apply the same logic to tables VBAK & VBAP. There are two problems in my way:
    1. As per operation guide, when you execute 'Define Selection Criteria', we should see three tab pages. 'Selections', 'Selection criteria' & 'Tables'. But I can see only two in my system i.e 'Selection criteria' & 'Tables'. There is no 'Selection' tab page in my system.
    2. Referring to forum Re: BPL: Filtering depending tables , we can use 'Selection Exit'. But can anybody guide me how that can be implemented and attached to the filter / process?
    Thanks & Regards,
    Audy.

    Hi again.
    Forum rules do not allow more than one question in the same thread, but anyway...
    TDMS BPL works by direct inserts in the database, so functional dependencies are not checked. This means that in VA01 you cannot create a sales order for a customer that does not exist but with BPL you can, though later of course you'll have problems when checking the sales order in VA03 (this is just an example: in practice the sales order context by default also includes the relevant customers). Unlike archiving, where you cannot delete a customer if sales orders for that customer still exist, in TDMS there are no such checks. This means there is really no sequence: in the end everything will be there.
    The direct inserts also mean that document numbers are kept the same, so existing objects with the same number are overwritten; check if that is a problem for you.
    About the last part of your question: first, don't forget that BPL does not include customizing, so make sure it is already there; second, BPL contexts are designed to include most tables related to a business process, but as you know R/3's data model is quite complex. After the copy you might realize that for your specific process maybe some tables were not considered. In that case I suggest you complain via OSS so that the context can be improved and we all profit.. ;). You must also be careful if you have Z tables that must be added to the context.
    Regards,
    Rui Dantas

  • Payment F110 - No data records found for these selection criteria, FZ208

    Hi all,
    I have done all configuration for payment medium for a customer in Norway. We use Telapay and program RFFONO_T. We have not activated the new general ledger but we have ECC 6.0 so I do not see why it should not work.
    The invoices got paid with payment order but when I should download the file in Environment > Payment medium > DME Administration I got the following error message:
    "No data records found for these selection criteria
    Message no. FZ208
    Diagnosis
    No data could be accessed for this selection.
    Possible causes are:
    No data exists for the activated selection.
    You have no authorization to display or edit data from this selection.
    Procedure
    First check whether your selection criteria are correct.  You may need to expand the criteria to include a larger search area to check whether data exists in the system.
    Make sure you have the proper authorizations for displaying and editing data.  Read the Release note for DME management for further information on the authorization objects.
    Proceed"
    I have tried with different variants but that doesn´t matter. When I look at the payment run log I can see following:
    "Additional parameter specifications 1400 SAPO02 are missing
    Message no. FR193
    Diagnosis
    Entry 1400 $V2& is missing from the additional company code parameter table.
    System Response
    Processing was terminated.
    Procedure
    Maintain the entry according to the instructions in the program documentation."
    I suppose that´s why I can´t get a file. Do any one of you know why I can´t get the file created. Please help.
    Best regards Lisa

    Hi Lisa,
    I have a similar problem with program RFFONO_T and Telepay format for a Norwegian customer. Payment medium is not created. In the payment run log is the following message: "Additional parameter specifications XXXX SAPO02 are missing
    Message no. FR193.Entry XXXX $V2& is missing from the additional company code parameter table."
    According the program documentation for RFFONO_T, a company number (11 digits) has to be maintained under company code global data, additional details. The legal org.number with 9 digits is already entered but I do not understand where to enter a 11 digits company number? A user number (10 digits) is also entered in trans OB94  but the problem remains.
    Did you find a solution to your problem?
    Regards,
    Agneta

  • Archiving: adding more selection criterias for MM_EKKO

    Is there a possibility for adding new selection criterias for object MM_EKKO? Any exits for Release 4.6c?

    Deactivated means that you have executed a 2-step archiving.
    You have different residence times. SAP set the deletion flag if residence time one is met, but residence time 2 not yet.
    If both times are met, the PO gets archived.
    for examples see OSS note 948493 - Residence time in new reports RM06EV47, RM06BV47
    You probably have customized the test variant for MM_EKKO as production variant, other wise SAP would not have updated your database.

  • MSS  -  reporting  -  selection criteria  - translation

    Hi
    The selection criteria iView
    ( com.sap.pct.hcm.rpt_objectselection )
    has two drop down lists fields:
    1) reporting period
    2) limitation (all employees, directly subordinate
       employees etc)
    I need to translate them to french.
    If I inlcude the iView in my translation list I see
    the reporting period object as:
    Selection period values
    (0=today, 1=current year, 2=current month,
    3=all, 4=past, 5=future, 6=key date, 7=other period)
    which I can translate without problem.
    but i do not see the object for the limitation.
    Any help appreciated.
    Thanx
    Paul

    Paul,
    I think you need to do them in R/3.  Lok at table V_TWPC_V & V_TWPC_VC (customer view of V_TWPC_V) this is where codes for All Employees etc and the texts are held.
    thanks,
    Paul

  • How  to add field( VBAK-SUBMI) as a Selection Criteria - VL10

    Hi friends,
    Could u please help in sort out the below issues,
    1. Add field VBAK-SUBMI as a Selection Criteria to the Selection Screen for the VL10 - Program V50RINCL, user exit V50R_SELECT_OPTION_ADD
    2.Transfer the VBAK-SUBMI field to the report created during the VL10 transaction. – Program V50RINCL, user exit V50R_USEREXIT_TRANSF.
    I am bit new to enahancements, please provide some information to achieve the above objects.
    Poits will be rewarded.
    Thanks.
    Regards. VKRAO.

    Hi,
    <b>Plz find the explanation abt user-exit below</b>
    User exits :
    1. Introduction
    2. How to find user exits
    3. Using Project management of SAP Enhancements
    1. Introduction:
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    Example:
    The program for transaction VA01 Create salesorder is SAPMV45A
    If you search for CALL CUSTOMER-FUNCTION i program
    SAPMV45A you will find ( Among other user exits):
    CALL CUSTOMER-FUNCTION '003'
    exporting
    xvbak = vbak
    xvbuk = vbuk
    xkomk = tkomk
    importing
    lvf_subrc = lvf_subrc
    tables
    xvbfa = xvbfa
    xvbap = xvbap
    xvbup = xvbup.
    The exit calls function module EXIT_SAPMV45A_003
    2. How to find user exits?
    Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
    If you know the Exit name, go to transaction CMOD.
    Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
    You will now come to a screen that shows the function module exits for the exit.
    3. Using Project management of SAP Enhancements, we want to create a project to enahance trasnaction VA01 .
    - Go to transaction CMOD
    - Create a project called ZVA01
    - Choose the Enhancement assign radio button and press the Change button
    In the first column enter V45A0002 Predefine sold-to party in sales document.
    Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
    Press Save
    Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
    Now the function module is displayed. Double click on include ZXVVAU04 in the function module
    Insert the following code into the include: E_KUNNR = '2155'.
    Activate the include program. Go back to CMOD and activate the project.
    Goto transaction VA01 and craete a salesorder.
    Note that Sold-to-party now automatically is "2155"
    <b>
    Reward points if it solves ur query or answer is helpful</b>
    Thanks
    Chinmay

  • Order of Variables in selection criteria involving multiple queries

    Hello,
    I've a query Q1 which has one of it's variables defined with replacement qry Q2. The query Q2 has a variable defined with replacement qry Q3. When i put qry Q1 in a application designer template and run the report, The selection criteria has the variables in the order of Q3, Q1 instead of Q1, Q3.
    How can i control this order of variables appearing in sel criteria.
    (i've observed that if there are 2 queries in the report the order is correct i.e Q1, Q2).
    The second problem is, in the report i've added a
    'Text Element' object. In the webitem tab, for property
    'List of Text Elements', i've added all the variables
    of the Query, The variable of qry Q1 are populated in the report output, but the variable of qry Q3 are not, How do i display this variable.
    For the  variables where no criteria is given, the report shows the text as 'Empty Demarcation'. How can this be made blank.
    Regards,
    Nagendra.

    Hi Nagendra,
    For removing the Empty Demarcation, in SE38 > SAPLRRSV > look at Text Element 301 and blank it out.
    Hope this helps...

  • Selection Criteria for Delta loads triggered using MDM_CLNT_EXTR

    Hi ,
    Currently we are required to load data only from two specific account groups . Therefore in the selection criteria in mdm_clnt_extr we maintian these two account groups and extract data.
    However, when setting up the delta load there does not to be an option to restrcit the delta to a specify an criteria. Therefore, in our case several records from account groups which are not required are passed on to the MDM system.
    Is there a way to address this requirement ?
    1. There is an option to run the initial load variants at regular intervals, the problem with this is that in our case we have several variant creates as the R/3 system does not allows extraction on more that 999 records at a time. Therefore at point of time to capture the delta records , if we run all these jobs our network gets choked.
    2. Run delta job, but without selection criteria it pulls out records which we don't require
    Any suggestions on how this problem can be addressed are welcome ,
    Thanks in advance,
    Anita George

    Thanks Michael !
    Well, regarding hte ALE settings, we did take a look in bd64 the filters are based on objects which one of these is relevant for customer account groups ? Probably in the future we would require all data, and then is it enogh to remove the filter ?
    Can a filter be maintained at the XI level , this would be good as only the required account groups are passed on to MDM . Is there any documentation on available on this ?
    Regarding the Import Manager, will have to check  this functionality, as it is now no matter how many times we update the map/rename /load/unload it automated imports keep failing.
    Our R/3 system seems to have problem extracting more than 999 records, as we tried with different number of records and all those extraction jobs got cancelled. So, currently we are running multiple jobs for the initial load and even this is very time consuming.
    Thanks & Regards,
    Anita George

  • Regarding Selection Criteria

    Hi All,
    Is it mandatory to have a info object in a cube which is used in selection criteria,
    which appears in Data selection tab of info package maintenance.
    Plz let me know ASAP.
    Thanks&Regards
    Message was edited by:
            sarau

    Hi
    in the infopack u get those in the selection tab which u check mark in the Datasource as a selection tab. now if they are presnt in the IP as selection then loading data will be helpful but if u dont add them in the cube how will be able to make them available in the selection scrreen of the query coz u need to make a varialble on them and untill and unless these are not present in cube u wont be able to make a varialble and hence wont be able to make them appear in the selection screen of the query
    hope this is helpful assign points if applicable
    thanks
    puneet

  • Selection Criteria in Supply Chain Cockpit

    Hello,
    Is it possible to add some selection Criteria to add object in the work area ? For example I would like to add the ABC indicator as selection criteria to load in my work area only Product that have a class A indicator.
    Thanks for your help.
    Laurent.

    Hello,
    If you want to use the Alert Monitor within the Supply Chain Cockpit (SCC) in SAP APO, you must assign application-specific alert profiles to your SCC user profile. In the upper right area of the SCC, you can see the existing alerts for the applications.
    Please look into the below link for more information:
    http://help.sap.com/saphelp_scm70/helpdata/en/47/f925c8852f383ce10000000a42189b/content.htm
    Regards

  • MSS Selection Criteria: Organizational Unit selection excludes sub OUs

    When a user selects an OU on the 'selection Criteria' iView, only members of that OU (and not any sub OUs) are included in the report. This is the opposite behavior to MDT, where all members of sub OUs are included.
    Does anyone know of any configuration that can change this? Should I look at configuration of the Object and Data Provider?

    Please check steps as mentioned here
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=199820849
    and report variant, check your evaluation paths if it is being refreshed correctly, click twice to refresh.
    check tje note 1431691
    When the report is launched from
    the portal, the program is reading the table:T77eo for the object
    type-'O' , since there are no entries for the object 'O' in the table,
    the switch INREL is not set, therefore the structure pchobjid is not
    filled while calling the report as shown below. Now I know the
    rootcause, but I don;t know the reason behind the table: T77EO not
    having entries for object "O".
    ==============================================================
        SUBMIT (fcode_rec-progname)
        USING SELECTION-SET fcode_rec-variant
        AND RETURN
                       WITH pchplvar EQ act_plvar
                       WITH pchotype EQ act_otype
                       WITH pchobjid IN pchobjid
                       WITH pchsobid IN pchsobid
                       WITH pchobeg  EQ act_begda
                       WITH pchoend  EQ act_endda
                       WITH pchbegda EQ act_begda
                       WITH pchendda EQ act_endda.
    try to use PNP database for seleciton only these paramters are passed to backend!

  • Modifing Exiting report and selection criteria

    hi,
    I am Facing some problems. i am using SBO 2004 2B.
    1) Is is possible to modify exiting reports?
    Can i add a column (user defined or system defined) other than columns which are available in "Form Setting"?
    If so how can I?
    2) Is it possible to add more criteria on reports selection criteria window?

    Mayur,
    If you are asking if you can use the Business One SDK to modify existing Business One reports in SAP Business One 2004 ... the answer is that you cannot. There were no reporting objects exposed in 2004A, B or C.
    There is some functionality with the Business One 2005A SDK for reporting.  You may want to download and look at the documentation on this.
    HTH,
    Eddy

Maybe you are looking for