Object or Bdoc type for project profile(PS)

Hi,
we have to integrate SAP PS and CRM marketing Campaign to transfer the cost of the campaign. In CRM we have a node where we assign the Project profile to the Logical client in CRM in SPRO.
We need to know is there a separate object or BDOC type for this or is it part of some of the existing Bdoc.
Thanks
AJ

Thanks Joaquin,
Please can you elaborate more on which transaction or rather where can we pull the object from...Is it part of initial load settings?
We dont find it there.
Thanks
AJ

Similar Messages

  • Restricting Budget Profile for project profile in CJ01

    Hi,
    I have a scenario where users are asking to restrict the budget profile for a project profile in CJ01
    For example.
    Say i have the following Budget Profiles
    ZXXXXX1
    ZXXXXX2
    ZXXXXX3
    ZXXXXX4
    and
    Say i have the following Project Profiles
    A1
    A2
    A3
    A4
    The requirement is - I want to restrict the following way in CJ01 when I create a project.
    For Project profile A1, I want to see only the budget profiles ZXXXXX1 and ZXXXXX2
    For Project profile A2, I want to see only the budget profiles  ZXXXXX1 and ZXXXXX3
    For Project profile A3, I want to see only  the budget profiles ZXXXXX3 and ZXXXXX4
    For Project profile A4, I want to see only  the budget profiles ZXXXXX4 and ZXXXXX1
    Can I achieve this? If yes, then can you detail the steps. Please let me know. 
    Regards,
    MS

    Mukund,
    Try out puting in a validation as per your requirement.
    Regards
    Sreekanth

  • Planning/Budget Profile always required for Project Profile?

    Hi,
    Are planning and budget profiles always required fields for Project Profile?
    Thanks!
    Regards,
    Vivian

    Hi,
    Thanks for your reply.  May I know if you could advise relevance of the planning and budget profile?  what if I do not specify them in my Project Profile? What will be the impact or default values if they are not specified in the project profile.
    Thanks!
    Regards,
    Vivian

  • Material type for Project related

    Hi ,
    When creteing the material master we have which take  "Material Type"  if it related to project , i am perticular about construction and instaltion related business topic . Normally we take Raw material , semi finished material and finished material in case of manufactureing industry , in construction in

    Hi
    In projects also maximum Raw material is used. Usage of semifinished and finished material is minimum.
    i am particular about construction and instaltion related business topic .
    In construction industry raw material type is used.
    Ex:
    Cement, bricks etc...
    Cement and bricks is a finished product for production industry, but this as RAW material for construction industry.
    THanks
    S.murali

  • Assign cost object by condition type for accounting

    Hello All,
    Our scenario is that we have a single billing line with a service order assigned as the cost object on the line item.  This line has multiple condition types going to different GL accounts on the RV document.
    Once the service order is on the billing line all of the RV document lines get the same service order for cost object assignment  We want to assign different cost objects (service order, internal order) to the different lines on the RV document based on the GL account.
    Example:
    Billing document line 10
    Material 123456
    Service order 999999
    Condition type           GL                      Desired Cost Object
    ZZ01                      480000                  999999 - service order
    ZZ03                      560000                  11111 -  internal order
    ZZ04                      470000                  999999 - service order
    ZZ05                      440000                   22222 - internal order
    We have the multiple GLs getting assigned, it is just the cost object on the RV document that is a problem.  Is there a way to do this in config...or is a user exit the only option?
    Thanks in advance!
    Edited by: Allison Sains on Jan 20, 2012 7:01 PM

    Thanks for the response.  It looks like we're going to try and rework the account assignment so a user exit is not required (use OKB9 instead).

  • File Error: Wrong File Type for Project File

    Just had our 2nd LaCie 2tb hard drive crash. Just completed a project and was about ready to compress it when the drive wouldnt boot up anymore. I tried every program under the sun before eventually sending it off for data recovery.
    $1700 dollars later I have all my files, except one little change.
    My FCP project files are not recognizable by FCP anymore. In the get info box it says they are "Kind: Final Cut Pro Document" The preview picture is a gradient box with exec in the green text in the upper left corner. I tried adding the .fcp extension, but it still wouldn't open it. I keep getting the "File Error: Wrong File Type" when I try opening it with FCP.
    Anything I can do to fix this?
    Thanks

    You might give the following a try...
    1. open the .fcp file with TextEdit
    2. save the file again
    3. open with fcp
    Frank

  • Restricting project profile in CJ20N/CJ01 t-code

    Hi Experts,
    Based on the client requirement we have created a new Project Profile named as theShutdown Project. The type of Project is ShutDown. The client wants to restrict the same only for the Plant users usage. 
    I know that the type of the project can be restricted thru standard authorization object -
    C_PRPS_ART. The coding mask is not restricted or defined as of now.
    Since we could not find any standard authorization object which restricts specifically on Project Profile, we tried creating a Z
    auth.object as follows:
    u2022 SU20 -CREATE AUTHORIZATION FIELD
    u2022 SU21 -CREATE AUTHORIZATION OBJECT
    u2022 SU21 -LINK AUTHORIZATION FIELD AND AUTHORIZATION OBJECT
    u2022 SU24 -ADD THE AUTHORIZATION OBJECT IN THE TCODE CJ20N AND CJ01
    u2022 PFCG-CREATE ROLE WITH AUTHORIZATIONS TO TCODES- CJ20N AND CJ01. ALSO
    ADD THE AUTHORIZATION OBJECT MANUALLY. GENERATE THE ROLE AND SAVE THE
    SAME. LINK USER ID TO THE ROLE
    u2022 SE38- LCJWBF7S. CREATE ENHANCEMENT IN FORM PROJ_SET AND ADD
    AUTHORISATION CHECK OF THE ABOVE CREATED OBJECT 
    The issue is that the above procedure is restricting the access for all the other users too despite it being attached to a particular role only. Every project profile other than shutdown  project is getting an error -"You are not authorisedfor this activity"  
    Please advice if our approach is correct or are there any alternative available.
    Regards
    Khushali

    HI,
    You need not have a separate Auth Object for "Project Profile".
    Make use of your standard auth object "Project Type" only.
    Introduce a simple validation to say that The only project type "Shutdown Projects" should be allowed for your Project Profile "Shutdown Project"
    By this, while Project creation, system throws error (Error you defined in the validation) in case both the Profile & Type are incompatible. When the user selects the appropriate "Project Type", then the subsequent standard error would be related to authorization on Project Type for the desired users.
    regards

  • Authorization  with respect to Project profile

    Dear All
    i have one problem pl suggest me
    I'm implementing one project ... i'm in authorization matrix i need to give the authorization with respect to Project profile
    Ex .  one controlling area
            two company code
            ten project profile
    each profile have different  responsible  person (some time five to six person are in single project)
    In one plant they are using six different project profile .this my concertino
    now i need to control the authorization with respect to Project profile .i'm not able to find the any object in the authorization matrix . pl suggest me . if know the technical object name pl suggest me

    You can use the following objects for controlling authorisations:
    Co Area
    Cost Center
    Profit Center
    Project Manager
    Project Type
    I don not believe there is an auth object for Project Profile.   If you have a 1 : 1 relationship between your project profile and project type, than it would be possible to use this to secure authorisations.
    C_PRPS_ART.
    I hope this helps.
    Ian

  • Manual reservation for Project Stock / wbs element

    Dear Gueus,
    In Project base Industry,
    For Production order confirmation I want to transfer Project stock of raw Materials from Main Storage stock  to Production WIP stock,  from this WIP Stock,  I will consume raw mtl at the time of Order confirmation.
    Now at the time of Manual Reservation in MB21 system is not allowing  311 Q  Mvt type  for Project stock reservation.
    Is there any other procedure / t- code to reserve project stock.
    Pl guide me for the same.
    Thanks
    Umesh

    Hi,
    A word of caution, before processing any mass transactions such as COHV etc, its always better to double check the data. Reason is because the program performs mass update & any reversal would be a time consuming process.
    Now for mass confirmations of orders via COHV
    1. Execute COHV, in the first screen, select Order Headers, specify the order numbers in the field. If you have saved the list as a text file, then click on multiple selection & click the green icon at the bottom right corner, specify the file & the orders will be read.
    2. In the tab - Mass Processing, select confirmation for the field Function & if you want to execute immediately, then select the same in execute function. Depending on your rqmt, you can have the log & also output the logs.
    3. Click execute or F8, then select all the orders & then click on the mass processing drop down icon & click execute. The processing begins in foreground. Once the processing is done, system puts out a log showing the once which were confirmed & the once which were not able to be processed & the reason for the same. (For background processing, select the same in mass processing tab in the selection screen).
    Please note, for order confirmation to take place the status has to be REL, also if any user status is active, check if the same allows confirmation.
    I would strongly suggest, first try in your sandbox server & once you're familiar with its processing, then proceed to use in production system.
    Hope the above helps.
    Regards,
    Vivek

  • How to get the connected Adapter Object for a particular BDoc Type?

    Hi All,
    I have a scenario in which CRM system is connected to ERP system.
    In SMW01 transaction, I can see one BDoc with BUS_TRANS_MSG as the BDoc Type in CRM.
    Now, how do I get to know if this one BDoc is a SALESDOCUMENT or SALESCONTRACT.
    Is there any way thorough which I can get to know the Adapter Object for this particular BDoc.
    Regards,
    Madhuri

    Hi Madhuri,
               Happy new year.
    In Transaction : R3AC1.
    You can observe the Linked BDOC for the adaptor objects. For example Sales docuemnt and Sales contrcat will have the same linked BDOC as "BUS_TRANS_MSG".
    If you see an error in SMW01, you want to find whether it is salesdocument or contract.
    1. Please take the Queue name from SMW01.
    from the queue name you can find whether it is sales contract or sales document.
    Queue name is customized in tables: SMOFQFIND.
    I hope this helps you.
    regards,
    Sri...

  • No entry found in table SMOFQFIND for BDoc type SI_CONTRACT

    Hi Gurus,
    I try to do a request dowload for SI_CONTRACT object.
    When  execute and monitor my request objects the status is OK.
    Then, I check the BDocs Message Trace and I see the following  error
    "No entry found in table SMOFQFIND for BDoc type SI_CONTRACT - Queue name used: CRI_SI_CONTRACT (see note 677800 for further info"
    Does anyone know how to resolve this issue?
    Thanks,
    M@le

    Hi Brian,
    There was leading 0 for the contract # in the request detail, however this message is still in the BDoc message trace. The BDoc was posted successfully. I checked the table SMOFQFIND and could not find the entry for BDoc type SI_CONTRACT.
    There are records for SI_CONNOBJ and SI_POD which are all delivered by SAP. I think we just need to maintain SI_CONTRACT in this table to get rid of this message. Just I do not know what exact to maintain for SI_CONTRACT.
    Could you help to check standard SAP environment to see what is the detail for SI_CONTRACT in table SMOFQFIND?
    Thanks,
    ZJKong

  • Planning Profile for Project System

    Dear All,
    In planning Profile (T Code OPSB) for Project System we can find  RElem.f.billing plan ..field, in this field which cost element we have to assign wheather it is sales revenue or secondary cost element cat.31 or else..plz adives me..
    Thanks and regards

    Mr. Sridhar,
    Thanks for ur reply, here my querry is, i have types of sales revenues like domestic, export, industrial etc.. there is only option is there to maintain revenue cost element, so which revenue cost element i have to maintain in planning profile.
    Regards
    Ramesh

  • Autharisation object for  project team for WBS element

    Hi all
    My client requirement is when they allotment project team for WBS element some of the user restrict to delete it from menu tab in CJ20N transaction code and particular user only delete it. could any one guide me under which object i can manage this authorization to restrict the user so that in menu tab delete tab is gray out.
    Regards

    Hi,
    Using ACL, you can give four authorizations like 'read', 'write', 'admin' and 'no authorization' for a user for the each element (object) of project.
    For a user, you maintain the ACL for the whole hierarchy(inheritance) or for individual element.
    You can maintain ACL for user group or for Organization Group instead of users as well.
    In the project profile in SPRO, we can see three radio buttons for ACL like 'No ACL', 'ACL (No Inhr.)', 'ACL (with Inh.)'. You choose according to your requirement.
    For more details please go through SAP Help. Explained in detail there.
    Regards,
    Gokul

  • Assigning Filter Object Type for Internal Order

    Hi All,
    I have a requirement to send a INTERNAL_ORDER IDOC to another system on creation or on change of an order. I have created the model view and added the BAPI InternalOrder.SaveReplica in the distribution model (BD64) and the next step was for me to add a filter. I tried creating a filter group but then I get the message "Select node:Content-dependent parameter filtering". I have done a similar configuration for PROJECT idoc before and I was able to solve this by configuring in BD95 - Defining the filter object type and then BD81 - Assigning the filter object type to the parameter. However now when I try and implement the same steps for the Internal Order IDOC, I am having trouble assigning a filter object type to a parameter. I want to filter by company code and so far I was able to define the filter object type (BUKRS) in BD95 and then when I go on to try and assign this to the BAPI Parameter in BD81 , only 1 parameter appears (objectstatus) when I drop down for the parameter options.
    The row entry that I am trying to add is:
    Obj. Type
    Method
    Filter object type
    Parameter
    Field Name
    BUS2075
    SAVEREPLICA
    BUKRS
    MASTERDATA
    COMP_CODE
    But only OBJECTSTATUS appears in the Parameter block as an option when I press F4.
    Further more when I try save the entry as above, I get an error. Error Message: "Entry MASTERDATA does not exist in (check entry)"
    Can I please get some guidance on how to filter the internal order by company code or more importantly advise on which step I may have skipped in order have “MASTERDATA” appear as an option for Parameter field in BD81.
    Thank you.

    Hi,
    I need to pass object key or object type to a function module 'SAP_WAPI_WORKITEMS_TO_OBJECT'. This function module returns the worklist details(workflow inbox). In worklist details i need to use the field for workitem id.
    Regards,
    Gautham

  • How to stop BDOC generation for a particular transaction type of salesorder

    hi,
    i  want to stop bdoc generation for a particular sales order transaction type ZLEG.
    this order types are not flowing into CRM that i have done,but bdocs for it are still getting generated.
    regards,
    vishesh agarwal

    Hi Vihesh,
    SMW3_00 will only enable you to switch off the creation of ALL BUS_TRANS_MSG BDoc's.
    What you need for your requirments is to filter the data that are sent according to sales order type. For upload to ECC, you can do this by by defining criteria fields for the object in tr SMOEAC. For specific details of how this can be done for sales documents, please refer to notes 502037 (valid for new releases also) and 497434.
    Best regards,
    Brian.
    Edited by: Brian Patterson on Jan 9, 2012 2:50 PM

Maybe you are looking for