Object with runtime number '0' not defined

Hello,
We have a problem in one step of the workflow we created for sales orders.
The following are the errors:
EXECUTE_METHOD_OBJECT_SYNC -> Object with runtime number '0' not defined
EXECUTE_METHOD_BOR -> Object with runtime number '0' not defined
EXECUTE_METHOD_BOR -> Object with runtime number '0' not defined
Object with runtime number '0' not defined
Message no. OL808
We have already seen all the binds and correct.
Thanks!
Ariel Prebianca

Associated message no with message 'Object with runtime number '0' not defined' is OL 808.
Check Note 1322173 - Wrong error msg raised in BP_JOB_READ of interrupt process. It may not directly solve the issue but it will help you show correct message.

Similar Messages

Order number range not define

Hi Experts,
when i create a production order system generate error massage " NUMBER RANGE NOT DEFINE ".
I have maintained OPJH (Number range also) and i have maintained CO82.
and order type also assign to number range group .
when i create production order in particular plant(1100) with same order type(PP01) then generate a error massage but when I create production order in other plant(2100,3100,4100) with same order type (PP01) then not a problem.
OPJH, OPJK, OPU3, OPL8 also maintained in this plant(1100) for this order type
Please suggest me
Thanks in advance............................

Please do the following
1. Double check in CO82-> Change number groups -> Double click the Production order type (PP01) change the number range & save.
2. As you specified its working well for the other plants 2100,3100,4100. Please check in OPL8 whether the plant 1100 is assigned to the specific order type or not. But CO82 is not plant specific its global change of number ranges for all the plants.
3. Finally if you are trying this with in development system, check with the basis whether the transport reqeust will take time to update.
Check and revert back.
Regards,
Sundhu

Internal number assignment not defined (please enter number)

Hi gurus,
I am trying to recreate a PO with the BAPI BAPI_PO_CREATE but I always get the following error message 'Internal number assignment not defined (please enter number)'. Can anyone assist please
Regards,
Thandi

Hi,
Are you passing the purchase requisition number?
Possibly you cannot use that.
Check the same.
First try creating a PO via ME21N with the data you have.
Check if you face any problems and then try with the BAPI.
It will save a lot of time in investigating the errors.
Regards,
Ankur Parab

Error in ME59N- Internal number assignment not defined

Dear Gurus,
I am getting error while creation automatic PO In ME59N. Below error shows
Error Name                                                                                          Massage Class          Msg No.
PO header data still faulty                                                                            MEPO                         2
Internal number assignment not defined (please enter number)                 06                              243
I have done all the setting in Material Master & Vendor Master for Automatic PO Genration.
Aslo I maintain the source list & Info Record for two vendors.
I assign the source of supply in PR .
After this when I exicute in ME59N by entering Purchasing Group,Purchasing Org,Vendor,Plant
and selected the Per Requisition , per contract tab.
After this above two error is showing in SAP.
Kindly give us solution to resolve this.
Regards.
Abhijit
Subject changed to reflect the issue- by: Jürgen L

Hi
The error is probably caused because T161-NUMKI = <BLANK>. Please fill in the valid T161-NUMKI.
This needs to be done in customising
Transaction SPRO:
Material Management -> Purchasing -> Purchase Order -> Define Document types
Number range in the case of internal number assignment
Hope this information is of help.
Kind regards,
Lorraine

Number range not defined

Dear Sir,
When i creating production order in CO01 error is coming number range not defined.
Guide me where we defined number range for production order.i have maintained in co82
but the issue is not solved.

Go to OPJH
select your order type
And select the number range in Order type
select you order type and assign in Number range group
and then create a new order
Or Go to Co82
select Group
Your order type is in Not assigned
select your order and assign to group

PO Error-Internal number assignment not defined

dear all gurus,
while i am creating the po and save it, the error occurs that Internal number assignment not defined (please enter number).
i hv already defined the no. range for the po.
now what should i do further in these matter.
rgds,
rajesh

Dear,
SPRO - Materials Management - Purchasing - Purchase Order - Define Document Types.
Select your document type and Assign your number of number range in number range intraval.
Regards,
Mahesh Wagh.

Maitenance Plan - Number range not defined

I am trying to create a maintenance plan from a brand new system. When going to IP31 I get the error, number range not defined. So I went to SPRO and transported the number ranges. It still would not create a maintenace plan and got the same error. Am I supposed to assign the categories to the Maitenance plans number ranges? If so, how do I do this?
Your help is appreciated.

Hi,
There are two relevant number ranges - One for maintenance plan and the other for maintenance item. Customizing as follows:
-Plant Maintenance and Customer Service
-Maintenance Plans, Work Centers, Task Lists and PRTs
-Maintenance Plans
> >Define Number Ranges for Maintenance Plans
> >Define Number Ranges for Maintenance Items
Alternatively use transaction IP20 and IP21.
In the case of maintenance plan number range you must assign each category to a particular number range. Use the icon 'change groups' to do this.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

Prob While Creating Customer Master - Error Msg "Number '0' Not defined"

Dear Experts,
I am Trying to create a customer with diff SP, SH, BP and PY. I was able to create Customer for BP and PY.
But now when I go and try to created a SH customer with xd01 for my Sales.Org (99SS-XS-X1),
In the Sales Area Data, Partner Function Tab, Partner function field the Number is 0 before the SH function field (instead of Internal / Blank) and at the bottom give the error Msg that "Number '0' is not define". I have Cross checked the my Number ranges(no-22 from 7000-7999), account groups(ZA22) and Partner function (SH), everything seems to Ok. But unable to find the solution. plz help me with this if you have ever come across such a prob.
I would like to mention that the previously had no issues in creating customers following same procedure. I guess some one must have changed some settings by accident.
This prob is only specific while creating only SP and SH Customers.
Many ThanX.

Thanks Amit for your valuable suggestion, But today I was able to solve the problem with help of my trainer, Someone has changed the default settings in partner determination, the solution is below which will help anyone who may come across a similar Problem.
Spro->IMG->Sales & Distribution->Basic Functions->Partner Determination->Setup Partner Determination->Setup Partner Determination for Customer Master->Partner Functions
Find the partner Function SP/SH/BP/PY there partner type should be KU. If anyone changes this settings Then the above problem arises.
Regards.

The object with id number 'nnnnn' cannot be deleted, modified or scheduled

I am getting this exception in the following scenario, and I'm not sure why, or what is the best way to get around it. Any help would be greatly appreciated.
I am writing a program to install report modifications to a BOE repository. This is my first foray into the BOE SDK, so I'm still quite green. The basic steps that my program takes are:
- Look for an existing version of the report (based on title);
- If it exists, move it to an Archive folder within BOE;
- Create the new version of the report in the folder that the old version was in;
- Copy all report options that would not likely be part of the change (scheduling info, security info, format, etc., etc., etc.);
- Call infoStore.CommitBatch() to commit everything to the CMS.
Is it during the CommitBatch() that I get the exception in this post's subject. The ID number referenced is that of the new version of the report. I assume that the issue is that the SDK is trying to schedule an instance of the new version (although at this point, I am not looking to do that), and it doesn't recognize that the new version exists yet, even though creating it is part of the batch being committed. (Scheduling will be added later, if the old version had any scheduled instances.) At this point, my goal is copying the default scheduling information from the old version to the new version.
I'll start wading through the documentation and forum posts, but there's a whole slew of information, so that might take some serious time. If someone could point me in a direction, that would be most helpful. I guess what I'm looking for is the answer to "What causes the SDK to schedule an instance of a report?"
Also, I was hoping to do all of the changes to the CMS, and then atomically commit everything in one shot, so either none or all changes make it to the CMS, including scheduling new instances of new versions of the report. This exception leads me to believe that I will not be able to accomplish this task. Is that correct? If so, do you have an opinion on the approach of creating a second InfoObjects collection with the instances to be scheduled, and follow the CommitBatch() of the objects that are changeing by a separate CommitBatch() of the scheduling instances?
Thanks for the help,
Carl

This is the logic that creates the InfoObject:
// create new report version in BOE from file passed in
InfoObject newver = mainrpts.Add(infostore.PluginManager.get_PluginInfo("CrystalEnterprise.Report"));
Report rpt = (Report)newver;
rpt.Files.Add(reportFileName, 1, null);
rpt.Title = baseReportName;
rpt.ParentID = installToFolderId;
Then there is ~260 lines of code to move values from the old version of the report to the new version. I can post any relavant section that you suggest (but feel 260 lines is a bit long to include here).
As an aside, I just ran across the sample programs that schedule instances, which pointed me to the infostore.Schedule() method. I am currently NOT calling that method in my program anywhere... (That also leads me to believe that a second InfoObjects collection will be needed for scheduling the new versions of the report. Please correct me if I'm wrong.)
Thanks for the help,
Carl

Help with case number :0185603779 not resolved. Can someone please help me??????????????

I have Adobe Digital Edition 2.0 on my computer. I am receiving a message that it has stopped working.
I had contacted Adobe previously, but the issue was not resolved. Can you please help me?????????????

I concur with dwb's assessment. See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.

Imessage not activating with phone number, imessage not activating with phone number

I have seen other answers like putting it off and on. Toggling the imessage and FT buttons on and off. Have reset it. Tried all sorts and not happening. It disappeared when i changed the password of my Apple id.

You might have better luck posting on the iPhone community.
https://discussions.apple.com/community/iphone/using_iphone

Excise Invoice-Register Number not defined

Hi,
Iam using SAP 2007B, Pl 08. When I try to create Incoming or outgoing Excise Invoice, I get a error message "RG-Register Number is Not defined for Location". I have set the item as an Excisable item, the warehouse is an excisable warehouse and in the accounting tab of the Location setup the Excisable fields are put in properly.? Any solution
Regards
Kalli

As you are aware, 2007B has Location wise configurations.
So you have to define your locations first.
open Administration -> Setup ->Tax -> Excise Register Numbering and set the location wise excie register numbers

Error: $x_ShowChildren is not defined

The page definition page is not displaying any of the usual page objects. I'm getting an Error: $x_ShowChildren is not defined in the error console.
Source File: http://apex.oracle.com/pls/otn/f?p=4000:4150:1692562586117686::NO:::
Line: 39 error on the page definition page.

Hi all, we are experiencing this "$x_ShowChildren is not defined" error on our new
APEX 3.0 installation.
I've already checked the notes at
http://www.oracle.com/technology/products/database/application_express/html/3.0_fsps.html#01
and our page really looks as depicted at point one but the refresh doesn't seem to
do anything. We have tried to flush the cache and even change browser (IE and FF)
but the problem is still there.
I've checked the page source and the missing function is defined in
/i/javascript/htmldb_html_elements.js
The js file is visible if loaded directly but somehow the page fails with
Error: $x_ShowChildren is not defined
Source File: [...]/f?p=4000:4150:4106999370516652::::FB_FLOW_PAGE_ID,FB_FLOW_ID:1,101
Line: 39
(I've removed our address there ...)
The strange thing is that this happens only from certain PCs but all the
configurations (browser, network, ...) seem to be identical.
Any idea of what might be going on?
Thanks in advance for your kind help

Release rejected - Number Range not found.

Hi,
Iam creating a Rework Order RW01 order type.settings are almost same as PP01.
When I try to release the order it shows Release rejected and check log .
In the log I find below message thrown.
" You must enter the batch for material XYZ
*Message no. CO691"
However when I the enter the batch manually add try to release it again it shows Release rejected and check log .
In the log I find below message thrown.
" Number range not defined
Message no. 26023
Diagnosis
You have enter number range for the document type, but this number range is not defined for the number range object "document".
Procedure
Check in Customizing (Document management -> Control data -> Number ranges) which number ranges are defined.
If you want to enter a number range that has not been defined for the document type, contact your system manager. It may be necessary to create a new number range."
I have done the number range for order type RW01 in CO82 as well .
Is there anything I miss in Order Type configuration or Batch Management.
In PP01 order type my Batch updates when I release my order , Same setting is for RW01 as well.
Production Scheduling profile is also same for both.
Regards
Bhgl

Dear,
Please check the number range in CO82 or OPJH for your order type RW01.
Also check the component has determine the batch.
In the release control is set to user to decide (TCO11-FRBATCH = '1') or release despite of missing parts (TCO11-FRBATCH = '2') in Transaction OPJK
For all these components it is stored in the material master that a batch determination should be executed before or during the release (KZECH = '1' manually, KZECH = '3' automatically) and no batches have yet been assigned to these components before the order is saved.
Regards,
R.Brahmankar

Webi Reports - Object with id ... cannot be created because it has no name

I'm trying to launch a Webi report from our application using openDocument method. When the report is launched it fails with following error -
30567: Unable to save the document to the repository due to the following error: The object with id number '27731' cannot be created because it has no name. (Error: WIS 30567)
Before scheduling the report I'm calling setName method to set the name of the report but still it does not work. Any help would be greatly appreciated.
Thanks
Manas

Hi John,
I will try to give you some more background about this problem.
From our application we are not directly launching the report. We schedule it to run immediately and then view the instance created (using the instance id returned by the schedule call).
For scheduling we use the web services API (BIPlatform) and before scheduling we fetch all the prompts (again using a webservice API). The call is something like this -
WebiProcessingInfo wProcessingInfo = boWebIReport_.getWebiProcessingInfo();
After that we populate all the prompts with their corresponding values in application and schedule it. However the scheduling fails with the error I mentioned in the start of this thread and when we try to view it we are presented with a screen to enter prompts again.
From the scheduling error it looks like its failing because the name could not be set but I really doubt if thats the case. We use same calls to schedule and view Crystal reports also and they work perfectly. Only Webi is giving this error.
Thanks for looking into this.
Manas
Edited by: Manas Mandlekar on Sep 10, 2008 7:14 AM

Object with runtime number '0' not defined

Similar Messages

Maybe you are looking for