OC4J version

Hi ,
I've noticed that embedded OC4J is version 9.0.2.0.0 ...I have a 9.0.2.12.2 forms version(and the same patch installed on the iAS),but it seems that OC4J wasn't upgraded,it still shows' Oracle 9iAs 9.0.2.0.0 initialized' when starting it...
Is this the real version on OC4J even after patch3 of forms installed ?
Does Oracle intend to upgrade the OC4J?
(I'm asking this because all OJMS demos are running on version 9.0.3.0.0 ...haven't tried to backport it,to see what happens..:)) )
Thanks,
Sandu

Sandu,
as I said
OC4J 9.0.3 is part of Oracle Application Server 9.0.3, while Forms and Reports are only contained in Oracle Application Server 9.0.2 and thus run on OC4J 9.0.2.
Forms and Reports are not contained in Oracle Application Server 9.0.3. The next release of Forms and Reports is contained in Oracle Application Server 10g (9.0.4) and there OC4J 9.0.4 is used.
Frank

Similar Messages

JDBC Problem with Oracle 8.1.7. and OC4J Version 2

I use the following connection statement with Oracle 8.1.7. and JDeveloper 3 and Apache Server. It works fine.
String user = "scott/tiger";
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:oci8:"+user+"@RDL");
The same program does not obtain the connection with JDeveloper 9i, OC4J Version 2 and Oracle 8.1.7. I do not receive any error message, no exception is thrown.
Please help me.

Hi Avi,
I had already tried the thin Diriver but after yout help I try again.
With this thin driver, I received a SQLException which helps me.
As usual, there were a lot of different problems. The main one was that my default configuration do not use the jdbc/lib817 main jdbc/lib. There is a classe12.jar in these libs that are apparently different.
Finally, I obtain the connection with the "thin" driver.
Thank you very much Avi!
Reni

Error while deploy application in OC4J version 10.1.3.2

I have the OC4J version 10.1.3.2, I trying deploy the java application, but I have some problem. Somebody help-me? please, help into [email protected]. Thank you!
The messange from error in console:
[java] 06/07/2007 16:32:35 oracle.j2ee.rmi.RMIMessages EXCEPTION_ORIGINATES
FROMTHE_REMOTE_SERVER
[java] WARNING: Exceção retornada pelo servidor remoto: {0}
[java] java.rmi.RemoteException: bindWebApp() failed!; nested exception is:
[java] oracle.oc4j.admin.internal.DeployerException: Unknown site: http-web
-site
[java] Active sites are:
[java] file:/C:/oc4j101320/j2ee/home/config/default-web-site.xml
[java] at com.evermind.server.administration.DefaultApplicationServerAdmini
strator.bindWebApp(DefaultApplicationServerAdministrator.java:420)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorI
mpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodA
ccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:324)
[java] at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
[java] at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(R
eleasableResourcePooledExecutor.java:303)
[java] at java.lang.Thread.run(Thread.java:534)
[java] Caused by: oracle.oc4j.admin.internal.DeployerException: Unknown sit
e: http-web-site
[java] Active sites are:
[java] file:/C:/oc4j101320/j2ee/home/config/default-web-site.xml
[java] at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApp
licationBinder.java:191)
[java] at com.evermind.server.administration.DefaultApplicationServerAdmini
strator.bindWebApp(DefaultApplicationServerAdministrator.java:418)
[java] ... 7 more
[java] Error: bindWebApp() failed!; nested exception is:
[java] oracle.oc4j.admin.internal.DeployerException: Unknown site: http-web
-site
[java] Active sites are:
[java] file:/C:/oc4j101320/j2ee/home/config/default-web-site.xml
[java] Java Result: 17

user583805,
As it tells you in the error message:
File "http-web-site.xml" is replaced by file "default-web-site.xml" in OC4J 10.1.3.x
Good Luck,
Avi.

OC4J Version Confusion - 2.0.0.0 or 9.0.2.0.0 ?????

On my desktop PC I have JDevelop9i RC, which reports its OC4J version as Oracle9iAS (2.0.0.0) Containers for J2EE.
On my server PC I have the developer's preview of OC4J Version 2 as downloaded from the Oracle site, which reports its version as
Oracle9iAS (9.0.2.0.0) Containers for J2EE.
I have been experimenting with deploying session beans as Web Services. I can register such a bean with my local SOAP server and access it, but JDev will not allow me to register with the remote SOAP server. It just doesn't give me the option in the dropdown menu, even though the SOAP connection is created and tested in JDev.
Another problem is that I have been experimenting with accessing my EJBs using HTTP tunneling. Again, I can get this to work against my local OC4J, but when I run it against the remote one it reports that it can't find the EJB's home interface. The EJB works perfectly well without the HTTP tunneling.
I'm very confused. I would expect the version of OC4J on the remote machine to be the latest version but the JDev one seems better ... which should I be using?

The release 2 of Oracle9iAS is versioned as 9.0.2 so OC4J is versioned as 9.0.2. OC4J developers preview 9.0.2 is a little newer version than the embedded version in JDev (2.0.0). We will shortly come with a new and updated version of OC4J Developers preview.
For JDeveloper 9i problems please post your questions in JDeveloper 9i forum and you will get better and faster response. Following is the link for JDev 9i forum http://forums.oracle.com/forums/forum.jsp?id=513211 .
hope this helps
regards
Debu panda
Oracle

How to determine the oc4j version?

Dear All,
I would like to clarify which version of the OC4J server ( actually which version of the j2ee & servlet API) we have available. Where can I quickly see this info?
The best thing I have found is http://oursecurehost/7780/relnotes.htm I see we have "Oracle9i Application Server Release Notes" ... but I believe this to be incorrect....
Many thanks in advance
regards
Ben Bookey

Check MetaLink Note:230611.1
How to display the OC4J version details through a JSP
Regards
Dimitre

Oc4j version bundled with JDeveloper 9i rc

Hello,
is the oc4j version that is bundled with the just released
JDeveloper 9irc the final one?
"Oracle9iAS (2.0.0.0) Containers for J2EE"
it looks a little different from the "technology preview" which can be downloaded seperatly from the otn site.
greetings from munich, thomas.

Thomas,
You are right the Oc4J version embebbed with Jdev9i is a little older version than the Oc4J Developers preview. When JDev9i goes production it will include the production version of Oc4J 9.0.2.x.
hope this helps
-Debu Panda
Oracle

JDeveloper version numbers and OC4J version numbers

Hi all,
I know that the version numbers of the Oracle application server and the OC4J plugin are the same the default, but how is that with JDeveloper compared to the OC4J version of the embedded JDeveloper application server.
Is it the same always and if not where can I find a mapping table. E.g. is for JDeveloper version 10.1.3 also the OC4J container version 10.1.3 etc.
regards,
Ronald

Ronald,
yes, Oracle JDeveloper versions are in synch with OC4J and 10.1.3 JDeveloper uses OC4J 10.1.3.
Frank

Oc4j version upgradation ...

Hi Friends,
Presently our web application is running under j2sdk1.4.2_17 and oc4j_9_0_4_20040317. I want to upgrade my java version atlest to java1.5. But presently our application is using jndi.jar and classes12dms.jar along with other. But these two libraries are not present in new versions of oc4j. Did they replace these with any other libraries? or renamed to any other name?
Any suggestions will be appreciated.
I installed oc4j_extended_101330 version, that is supporting java1.5 but jndi.jar and classes12dms.jar are not present. I need a oc4j version with jndi.jar and classes12dms.jar and that should support java1.5 or above.
Thanks,
Ashok

Thomas,
You are right the Oc4J version embebbed with Jdev9i is a little older version than the Oc4J Developers preview. When JDev9i goes production it will include the production version of Oc4J 9.0.2.x.
hope this helps
-Debu Panda
Oracle

OC4J (version 9.0.3.0.0) interface with Domino server5.0

I have written a small application to interface with Domino server5.0 using IIOP. When I run the client application on HP UX 11.11 using HP-UX JDK 1.3.1.08 , it works fine. When I deploy the client code within a OC4J container (version 9.0.3.0.0) the same code gives me the following error:
org.omg.CORBA.INV_OBJREF: minor code: 1398079490 completed: No
I am able to run this application with the client deployed in OC4J version 9.0.3.0.0 using Sun JDK version 1.3.1_02 on a Win NT 4.0 system.
Any idea what's going wrong???
Thanks in advance . . .

i believe if you upgrade to 10.4.11 (use the combo updater http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__Intel), you will be able to install the current Safari and use the new version of iTunes.

How to get oc4j version from Java program

i have the following in my Java Program
Runtime r = Runtime.getRuntime();
Process p = r.exec("java -jar oc4j.jar version");
and then i try to read the InputStream from the Process p.
but this line is not executing, it returns the following error.
Unknown switch: ?version, type java -jar oc4j.jar -? for help
if i change it to ----------
Runtime r = Runtime.getRuntime();
Process p = r.exec("java -jar $ORACLE_HOME/j2ee/home/oc4j.jar version");
then i get another error :
Exception in thread "main" java.util.zip.ZipException: No such file or directory
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:112)
at java.util.jar.JarFile.<init>(JarFile.java:127)
at java.util.jar.JarFile.<init>(JarFile.java:65)
but if i cd to /oracle/j2ee/home and then run the command java -jar oc4j.jar version, then it gives me the right output with the right version, but for some reason the samething from inside the java program is giving me errors,
please help. i just need to read the oc4j version running on the server and display it in JSP.

Process p = r.exec("java -jar oc4j.jar version");The character before "version" should be a hyphen; yours is not.
Process p = r.exec("java -jar $ORACLE_HOME/j2ee/home/oc4j.jar version");
then i get another error : Exception in thread "main"
java.util.zip.ZipException: No such file or directory
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:112)
at java.util.jar.JarFile.<init>(JarFile.java:127)
at java.util.jar.JarFile.<init>(JarFile.java:65)One more problem here: $ORACLE_HOME will be not be interpreted in the runtime.exec even if it is defined as an environment variable. So you get an error that tells you oc4j.jar is not found.
Hope this helps you.

BPEL and OC4J version 11g

Does anybody know if Oracle BPEL process manager is available for OC4J Version 11g. If it is not the case, does anybody know if a new version will be available for OC4J V11 and when ? Where can I find the road map ?
Thanks for your answer. Yvan

I do not known anything about release dates on SOA 11g.
Currently Oracle support the AS servers:
- Oracle AS
- WebSphere
- JBoss
- BEA Weblogic
http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10538/toc.htm
Regards,
Marc
http://orasoa.blogspot.com

PDF Printing APEX 3.2.1 (APACHE FOP) which OC4J version for Oracle 11g?

I am using APEX 3.2.1 on Oracle 11.g (under windows XP)
I want to test PDF printing (in advanced turorial) with standard config ( APACHE FOP no Oracle BI publisher).
When I look oracle doc : http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html)
prerequisites for installing WAR file (Installing and Configuring Apache FOP) imply downlad for Oracle Containers for J2EE (10.1.3.2) ,
once there : http://www.oracle.com/technology/software/products/ias/htdocs/utilsoft.html)
the accessed page seems restricted to Oracle Application Server 10g Software Downloads.
My question : is the last Version (10.1.3.5.0 : Oracle Containers for J2EE 10g (OC4J) (build #090727, 91 MB) - J2EE 1.4 compatible with EJB 3.0 / JPA 1.0 support ) also VALID for Oracle 11g ?

I just installed a similar setup with the following software combination and it works.
win32_11gR1_database.zip
oc4j_extended_101350.zip
jdk-1_5_0_22-windows-i586-p.exe

PDF Printing APEX 3.2.1 (APACHE FOP) which OC4J version ?

I am using APEX 3.2.1 on Oracle 11.g (under windows XP)
I want to test PDF printing (in advanced turorial) with standard config ( APACHE FOP no Oracle BI publisher).
When I look oracle doc : http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html)
prerequisites for installing WAR file (Installing and Configuring Apache FOP) imply downlad for Oracle Containers for J2EE (10.1.3.2) ,
once there : http://www.oracle.com/technology/software/products/ias/htdocs/utilsoft.html)
the accessed page seems restricted to Oracle Application Server 10g Software Downloads.
My question : is the last Version (10.1.3.5.0 : Oracle Containers for J2EE 10g (OC4J) (build #090727, 91 MB) - J2EE 1.4 compatible with EJB 3.0 / JPA 1.0 support ) also VALID for Oracle 11g ?
Edited by: user10370192 on 10 nov. 2009 05:29

marked for cancel (wrong forum)

OC4J Version with jDeveloper

Hello, I've downloaded both jDeveloper 10g 10.1.3(J2EE) and
10.1.2, I'm developing for an OAS 9.0.4 and I want to know which version of OC4J they come with.
I want to develop with exactly the same version of the production server.
Maybe I must use the jDeveloper 9.0.5.2 version..
Could anyone give more information about that?
Thanks!

I have verified that the version number of jDeveloper matches with the oc4j that it comes with it.
But i've also realized that the newer versions of jDeveloper comes with new interesting features. So my question now is can I change the OC4J embebed into jDeveloper? That way I could use the jDeveloper J2EE edition with a 9.0.4

9iAS and OC4J versions

Hi all,
I am currently running 9iAS 9.0.3 (Portal 9.0.2.6) with OC4J 9.0.3. I have a requirement for OC4J 9.0.2 (an Oracle portlet that doesn't run on 9.0.3 yet!). So now I have the following questions:
- Can I keep my current 9iAS installation as is, but in addition have a OC4J 9.0.2 instance?
- Can I upgrade only my OC4J to 9.0.4?
Regards & TIA
Anton.

I have encountered a similar problem. This is how I worked around it.
I have Forms applications for which I installed 9iAS 902 into one Oracle home on my server. I also have JDeveloper 9032 applications which I was told require 9iAS 903 to run. So I installed a second instance of 9iAS (903) into a separate Oracle home. The later version becomes the Enterprise Manager and must be left as such.

OC4J version

Similar Messages

Maybe you are looking for